Related
Hello,
My phone recently lost 3G and data with the error code 67. Registration Failure. Your PCS Vision username and/or password maybe incorrect. Please try againg.
I got this message a while ago when I tried a tweak that "improved my cellphone internet speed" by changing the PRL. But insted gave me this error and the loss of 3G and data. I fixed it by manually changing the PRL trough recovery (updating prl dint work because i had no data). All was good, and once againg without doing anything this error comes up and I dont have 3G or data, I only recive calls but cant make em, i get redirected into sprint payment or something wich i dont owe anything. I notice my PRI (Not PRL) version was 1.7 or something i changed it to 1.90 but nothing. Oh and before this happened I noticed that Car Panel aplication was turning on by it self.
Android Version: 2.2
ROM: Koni's ELITE Series III
Recovery: Clockwork Mod v2.6.0.1
Any help would be great.
Any help will be greatly appreciated since I use this phone for my work XD, Thanks.
Are you sure sprint didn't put a lock on you acct
Sent from my PC36100 using XDA App
I'm sure my account is a family one, and if they did all my family's phone would be locked.
I guess im going to have to do a hard reset.
Don't know how it could've happened by accident but I had the same thing when my MSID and MDN were wrong. Try this:
##{yourMSL}#, edit, enter the correct MDN and MSID, commit modifications. Then update profile.
If still nothing then try:
##3282#, edit, enter MSL, data settings, menu, restore. The phone will reboot into "hands free activation" and you could let it run.
How this helps
Sent from my PC36100 using Tapatalk
BTW if that doesn't work don't do a hard reset while rooted. Unroot and go back to stock first. You will have to redo your MSID and MDN after a hard reset as well
Sent from my PC36100 using Tapatalk
Well I just unrooted and went back to stock (http://forum.xda-developers.com/showthread.php?t=780141) but in hboot i still have s-off.
Ok, I dont know whats MDN and MSID and lesss I know what are the correct ones for me, sorry Im a noob to this stuff.
Oh and im still getting the error after unroot/stock.
And I tried already the restore but it get stucks at "hands free activation" for ever with the error code 67 poping all the time.
I guess de MDN is my phone number cus thats what it was writen, but the MSID was a different number i changed it to mine but it dint do anything I guess il change it back to the number it was.
Agbrac said:
Well I just unrooted and went back to stock (http://forum.xda-developers.com/showthread.php?t=780141) but in hboot i still have s-off.
Ok, I dont know whats MDN and MSID and lesss I know what are the correct ones for me, sorry Im a noob to this stuff.
Oh and im still getting the error after unroot/stock.
Click to expand...
Click to collapse
ok so mdn is mobile directory number or your cell phone number. msid is your connection to sprint. you need to call into to sprint and tell them that you got that error code. they will then have you go through the manual programming that was stated before. when doing this write down your msid and you lock code or msl.
You said your on a family plan... if you have another phone that was activated at the same time for the same area it will have the same MSID. You might find it on the other phone under menu, settings, about. Or, of its an HTC phone you can ##3282#, view, and see the MSID there.
Sent from my PC36100 using Tapatalk
* I shouldn't have said "will" have the same MSID. It "should" have the same MSID...
I'm probably just making this complicated. Probably faster just to call Sprint
Sent from my PC36100 using Tapatalk
Of I found out my brothers MSID I changed it, updated profile and...
Device Configuartion
The Profile update could not be completed. Please try againg later. If the problem persist you may need to contact customer service. Error code:1012
untruestory said:
* I shouldn't have said "will" have the same MSID. It "should" have the same MSID...
I'm probably just making this complicated. Probably faster just to call Sprint
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Well called to sprint, they dont know how to resolve the issue they tell me to get my phone to the nearest store.
But I dont whant to, lol I know thers a way to fix this some how...
I'll keep trying if you find something else let me know, thanks.
I have read like 20 forums and still nothing, my phone currently is unrooted and on stock rom... Still getting the same error
I just noticed the hboot loader still says s-off, dont know if unroot worked.
Agbrac said:
I have read like 20 forums and still nothing, my phone currently is unrooted and on stock rom... Still getting the same error
I just noticed the hboot loader still says s-off, dont know if unroot worked.
Click to expand...
Click to collapse
what method did you use to root? if you used unrevoked then you have to flash the unrevoked S-On tool then RUU back to stock...but if you have already ran the RUU then it doesnt really matter
if you have insurance, my suggestion would be to just have sprint replace the phone
Nop dont have lol thats why im here
Agbrac said:
Nop dont have lol thats why im here
Click to expand...
Click to collapse
How did you unroot?
Sent from my nightly EVO
Agbrac said:
I have read like 20 forums and still nothing, my phone currently is unrooted and on stock rom... Still getting the same error
I just noticed the hboot loader still says s-off, dont know if unroot worked.
Click to expand...
Click to collapse
Don't take in your phone with s-off!!!
If it still says s-off then you're still rooted and they may tell you you're SOL.
After I had my evo flashed to a different carrier then flashed it back to Sprint my Evo misbehaved the same as you're describing. Basically what I did was completely wipe and reset the phone back to stock the way it was at the Sprint store before I bought it. Then manually programmed the MSID and MDN and let it go through hands-free activation just like they did when I bought it. That's basically what I described doing. Don't waste $50 on insurance.
Redo the instructions from the same guide you referenced making sure you did it as described using the Unrevoked S-On Tool and
PC36IMG. If you used another method to root I got nothing. You'll have to google.
Now that you're back to stock go ahead and do a hard reset. I had first tried the hard reset while rooted and it retained many settings. Get it s-on first THEN do your hard reset. This will clear ALL the settings including your MDN and MSID which you can program in and follow with ##3282... like I described before. Your phone will contact the network and update all the correct settings when it goes into "hands free activation", update profile, check for prl and firmware updates all on its own. Just let it do it's thing.
Post back on where you're at.
Well idk what i used was so long ago, unrevoked is fairly new i think so its not the one i used. Going to try what Untrue told me. will post back
First try, trying to get into recovery threw me a droid picture with red exclamation...
Will keep trying...
Recovery not working evo picture with red exclamation
Hmmm what now lol
So I flashed the file in the phone section of ODIN and now my phone will not activate... The MSL number is 000000 and i got it back to where i could use it but had no data but I was hoping a fresh flash would help get that but im stuck again with no service Although I can still get 4G. Ive been dealing with this for 4 days now and hoping someone has been able to get this straightened out...
Ive used QPST but not sure what i should do..
My RTN says
Mobile Number: 000-000-7183
MSID: 000-000-7183
Gingerbread EL29
Baseband EL29
PRL 60686(flashed this in)
PRI:0x01
PCB Version Unkown SMDKC210.000c
Can you update profile or prl?
Sent from my SPH-D710 using Tapatalk
Have you tried any of this yet?
http://forum.xda-developers.com/showpost.php?p=26131653&postcount=4244
You will need to call sprint for your MSID if you don't already know it so you can program it in.
Ive got it activated and i figured out what was the problem.. i didnt have the correct MSID number.. i was one number off and somehow after many many many attempts to activate and spending an hour on the phone trying to get the msid number which they didnt give me due to my msl being incorrect it finally activated through the hands free about 2 hours after i posted... and my msl is still 0000000... should that be a problem?
I want to flash back to ICS but Im kinda scared to now... lol.. i guess as long as ive got the correct msid number i shouldnt have a problem activating..
I will never again try to flash my phone while intoxicated. LOL
I thought it was bricked..
Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?
Damian8a said:
Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?
Click to expand...
Click to collapse
Have you tried the default Android testing menu?
*#*#4636#*#*
*#*#INFO#*#*
Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?
Damian8a said:
Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?
Click to expand...
Click to collapse
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.
JaiaV said:
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.
Click to expand...
Click to collapse
Well Its just matter of changing the MSL and the PRL and modifiying the Data parameters and sh*t like that.
And Ive done that like a thousand times with several HTC's Samsungs and Motorolas(Thats actually my second job, seriouslly, i get paid for doing this), I just need to connect it in diag mode and have the drivers.
Which is beeing really hard to do right now
Obviously using my laptop to change the parameters
Same problem
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.
marjohn1000 said:
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.
Click to expand...
Click to collapse
Uhh, Well I found an answer, but its not a solution yet.
Check out this thread http://forum.xda-developers.com/showthread.php?t=1696621
It explains why we can't use QPST...
Well it actually doesnt dierctly explain, but we have VIA Chpisets on our phones, instead of the common Qualcomm Chipset, who owns QPST.
But it also give some instructions about a program for VIA chipsets, ETS i think.
I was also reading in a Droid Charge thread (also VIA chipset) that there is a programm named VPST and VPCT or something like that, its like the "QPST" of the "VIA telecom" chipsets.
I'll try it tonight.
Is your gnex Sprint or Verizon?
Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.
marjohn1000 said:
Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.
Click to expand...
Click to collapse
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy
Damian8a said:
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy
Click to expand...
Click to collapse
I have a Srint. Searching for ViperBoy now.
has there been more progress on this? would love to update prl on cm10
jaron7_11 said:
has there been more progress on this? would love to update prl on cm10
Click to expand...
Click to collapse
Dont know man, I dont have the Nexus anymore, but for the PRL updating theres an app that makes shortcuts, I cant remember the name right now, i think it something like bettercut or something like that.
You can also flash an ICS rom and update the PRL like you would normally do.
Hope i helped
I've spent nearly two weeks trying to figure out what happened to my phone and how to restore it. After OTA 4.1.1 (I forced this clearing gsf), in a weak coverage area toggled airplane mode. It wouldn't come back out.
Fastboot flash, CWM, TWRP, dd command, Odin, re-partitioning, nand erase all - any attempt to flash radio-cdma.img hangs or fails.
I can confirm that many of the dire warnings about hard-bricking your device... Well, let's just say that with everything that I've tried, even the bolder attempts in the end, did not brick my device. Odin would always get me back.
Baseband Unknown
IMEI Unknown
My Phone Number Unknown
Everything!!! UNKNOWN
I found some threads on here mentioning CDMA tools and I've downloaded and attempted a couple, it seems that my pc has to have all the supporting programs to make a connection to my phone. The problem is these posts are not specific to my device but the S3 and it seems like a whole lot of trouble when there isn't a 'known' path and specific files for my VZW GNX.
I have also ran emmc check several times and memory checks out good. Sim card has also been replaced.
So I sit here today with 4.1.1 installed (less the radio-cdma.img). I can Odin the older stock images found here on XDA by deleting the radio-cdma.img within. Then use fastboot to flash the 4.1.1 images individually to have a Wi-Fi only device.
I'm willing to try anything. Any takers?
Your meid is smoked. You will need to completely reprogram phone. A restore won't do it Cuz its the serial of the device from factory. You can't fix unless you have msl
*Shaolin Shadowboxing*
Thank you for the reply!
Could you point me in the right direction? Is this done using CDMA tools? I've seen places that mention it can be done via the handset dialpad (other devices). I've found threads that give suggestions on how to contact your carrier to get them to give you the msl... and I've also seen posts that state that Verizon's MSL is almost always 000000. My brain is turning to mush! :cyclops:
Thanks again
JediNinjafication said:
Your meid is smoked. You will need to completely reprogram phone. A restore won't do it Cuz its the serial of the device from factory. You can't fix unless you have msl
*Shaolin Shadowboxing*
Click to expand...
Click to collapse
Verizon msl is usually 000000 you will need either the box device came in or the numbers under battery. The sticky part us going to be the MSID number you'll have to put in. If you have the ORIGINAL nandroid you made immediately after you unlocked bootloader, that one might work but no guarantees. The dialer code is *#*#msl#*#* with msl being the 000000. I believe that's it...could be *#*#spc#*#* with spc being spc and then have to enter msl. The MSID is mobile subsidy identification. Sometimes its NAM. Your MIN would be your phone number..mobile identification number.
If you get into the MEID it will have a couple numbers to enter. The numbers you will need will be your ESN hex and dec. I have all the dialer codes and can pm you a link if you like. Once you finish with the MEID repair that's where the NAM MIN thing will be needed. Unfortunately, the NAM/MSID isn't the same as your number and won't accept all 0's but once the meid is back you might be able to restore but am not positive on that. Can call Verizon and have them refresh phone I believe once meid is restored.
*Step Away From The Toolkit And NoROM Gets Hurt*
I tried the dialer code *#*#000000#*#*
The phone did nothing although as soon as I completed it went the field cleared. I'm on my own. Verizon told me a week ago they were sending me a refurb. Called yesterday and there was no record of another phone being sent out. Rep told me my Sim card was not activated in their system and a ticket was opened to have it unlocked on their network. It should be fixed on their end today. However, I still think I'm going to have to get radio-cdma flashed on my phone. Using getprop (from app market) it appears at some point I may have flashed GSM radios. I say this because there are GSM listings from the getprop output.
Any suggestions?
Sent from my Galaxy Nexus using xda app-developers app
I'd probably return everything to stock first. ##XXXXXXX# and *#*#XXXXXX#*#* codes depend a device's factory ROM.
I'm not convinced it's your MEID though. That alone wouldn't stick your phone without signal and you'd still be able to flash a radio. I'd also be careful not to mess with IMEIs or MEIDs unless you're absolutely certain that's the problem. If you're hell bent on it or you're doing it for fun, not caring of you wreck it, look up MEID repair and read up before messing around.
It wouldn't hurt to try and install a new radio via CDMAWS or a similar program. Just don't change anything you're not familiar with. You can really screw things up with programs like that if you mess around.
Sent from my Galaxy Nexus using Tapatalk 2
I'm pretty sure that my problem is due to flashing GSM on my device. I have not had any luck finding out how to go back. I'll check out CDMAWS... first time hearing about it.
untruestory said:
I'd probably return everything to stock first. ##XXXXXXX# and *#*#XXXXXX#*#* codes depend a device's factory ROM.
I'm not convinced it's your MSID though. That alone wouldn't stick your phone without signal and you'd still be able to flash a radio. I'd also be careful not to mess with IMEIs or MEIDs unless you're absolutely certain that's the problem. If you're hell bent on it or you're doing it for fun, not caring of you wreck it, look up MEID repair and read up before messing around.
It wouldn't hurt to try and install a new radio via CDMAWS or a similar program. Just don't change anything you're not familiar with. You can really screw things up with programs like that if you mess around.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
stwandell said:
I'm pretty sure that my problem is due to flashing GSM on my device. I have not had any luck finding out how to go back. I'll check out CDMAWS... first time hearing about it.
Click to expand...
Click to collapse
Pretty much meid smoked.
Wrong quote..trying to quote above. Just to ensure try *#06# and if it comes back with a string of numbers then you still have the meid. If blank...smoked
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
stwandell said:
I've spent nearly two weeks trying to figure out what happened to my phone and how to restore it. After OTA 4.1.1 (I forced this clearing gsf), in a weak coverage area toggled airplane mode. It wouldn't come back out.
Fastboot flash, CWM, TWRP, dd command, Odin, re-partitioning, nand erase all - any attempt to flash radio-cdma.img hangs or fails.
I can confirm that many of the dire warnings about hard-bricking your device... Well, let's just say that with everything that I've tried, even the bolder attempts in the end, did not brick my device. Odin would always get me back.
Baseband Unknown
IMEI Unknown
My Phone Number Unknown
Everything!!! UNKNOWN
I found some threads on here mentioning CDMA tools and I've downloaded and attempted a couple, it seems that my pc has to have all the supporting programs to make a connection to my phone. The problem is these posts are not specific to my device but the S3 and it seems like a whole lot of trouble when there isn't a 'known' path and specific files for my VZW GNX.
I have also ran emmc check several times and memory checks out good. Sim card has also been replaced.
So I sit here today with 4.1.1 installed (less the radio-cdma.img). I can Odin the older stock images found here on XDA by deleting the radio-cdma.img within. Then use fastboot to flash the 4.1.1 images individually to have a Wi-Fi only device.
I'm willing to try anything. Any takers?
Click to expand...
Click to collapse
Try this if you can http://forum.xda-developers.com/showthread.php?t=1743939
Did you do the *#06# I already think its gonna come back blank but ....what the hell right
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
JediNinjafication said:
Did you do the *#06# I already think its gonna come back blank but ....what the hell right
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Does he have the samsung drivers installed? If so does his computer recognize his phone when plugged in either adb or fastboot? Cause if he does then you can easily go back to stock 4.0.4 IMM76k using my link in above post
MEID definitely smoked. *#06# yields nothing. I have tried flashing back to stock IMM76K but cannot get past radio-cdma flash... it hangs. If I remove the radio-cdma image it stock flashes no problem... but I still don't have MEID when doing that. I believe I flashed GSM ROM or radios at some point. I say this because when in terminal emulator and type getprop, the output has several gsm entries. Verizon is sending me another SIM card. But before I put it in I believe I need to have the GSM stuff off the phone. I'm not quite sure how to do that.
My screen is cracked, Verizon and Samsung can do nothing for me. I'm on my own on this. I have two rumor touch (sprint) that work fine. I also have HTC EVO 4g (Sprint)... been looking at activating on Verizon, but have had no luck getting CDMA tools to recognize phones... even after wiping drivers and re-installing multiple times.
I'm stuck using a very basic Samsung Knack flip at the moment... Sucks big time. Cash is short so I'm trying to make do with what I have.
Still needing help guys and gals!
And thank you all so much for your ideas and suggestions! I have learned a lot!
Sent from my Galaxy Nexus using xda app-developers app
Do you have the box that came with device so can reapply meid? You'll need your msl in order to edit. If have a backup of original stock after you unlocked bootloader..that one might reapply your info. Otherwise you need that mls
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
Hi, Guys!
I have the same problem On Samsung Galaxy S3 LTE GT-i9305 - by mistake flashed with ODIN "phone " section ( that means I flashed RADIO ) - as a result No IMEI, NO RADIO-GSM, BASEBAND unknown...(((
Somebody found solution?
Thanks in advance!
My brother is having the same problem with his Galaxy Nexus. Anybody found a fix for this problem?
I just started having this issue the other day as well (baseband/IMEI, etc all unknown). Phone was just sitting on my desk when I noticed it didn't have service. After being unable to flash the cdma radio, I am trying to get the phone back to stock. However, I am unable to flash the stock image because there is a version check for the cdma radio. Is there a way to flash the stock image without the cdma radio check?
ackurv said:
I just started having this issue the other day as well (baseband/IMEI, etc all unknown). Phone was just sitting on my desk when I noticed it didn't have service. After being unable to flash the cdma radio, I am trying to get the phone back to stock. However, I am unable to flash the stock image because there is a version check for the cdma radio. Is there a way to flash the stock image without the cdma radio check?
Click to expand...
Click to collapse
Any luck with yours. I just started having the same problem. My phone freezes and I have no service. I am trying to return to stock using this GUIDE but my phone freezes whenever I try to Flash the CDMA Radio. If I skip that step it doesn't install the stock version and I'm stuck in Paranoid 3.2 and unable to return to the store in the current condition due to warranty issues. If I can make it stock I will go get a new one.
jaymazz13 said:
Try this if you can http://forum.xda-developers.com/showthread.php?t=1743939
Click to expand...
Click to collapse
Just wanted to let others know that I was on a JRO03O rom, decided to return to stock 4.1.1 and must have screwed up something because after getting back up and running I had the same issues as OP. No baseband, IMEI, *#06# was blank, etc. I was about to embark down the path JediNinjafication linked to, but it looked extremely intimidating. Jaymazz's link to Vabeachfc3s reset tool worked like a champ, put me back at at 4.0.4 and all the radio stuff started working right away! Phone updated itself to 4.1.1 shortly thereafter, and it's still going strong.
my incredible is fully rooted. I connect to qpst and when i write to phone a windows comes up and it says read only nv files any solutions
flipinfin said:
my incredible is fully rooted. I connect to qpst and when i write to phone a windows comes up and it says read only nv files any solutions
Click to expand...
Click to collapse
Did you enter the spc code first, six zeros, then read from the phone, then write.
cmlusco said:
Did you enter the spc code first, six zeros, then read from the phone, then write.
Click to expand...
Click to collapse
Yea i did that. Could that mean i have a bad esn. though it says that it still writes
What are you trying to write to your phone? The meid/esn has nothing to do with writing to the phone, I flash phones with bad meids all the time
Sent from my PG86100 using xda app-developers app
flipinfin said:
Yea i did that. Could that mean i have a bad esn. though it says that it still writes
Click to expand...
Click to collapse
Not sure what that means. I have only used qpst a couple times, but have never gotten that error.
flipinfin said:
my incredible is fully rooted. I connect to qpst and when i write to phone a windows comes up and it says read only nv files any solutions
Click to expand...
Click to collapse
Ive gotten that error millions of times. I dont kno why tho.
Sent from my rooted GameBoy Advance! ^¬^