Is there a way to use cdma workshop while running an AOSP rom? I mean is there another way to get pc to recognize the phone without using dialer codes? maybe like get the usb connection to be seen as a com port? just thought i'd ask
{ParanoiA} said:
Is there a way to use cdma workshop while running an AOSP rom? I mean is there another way to get pc to recognize the phone without using dialer codes? maybe like get the usb connection to be seen as a com port? just thought i'd ask
Click to expand...
Click to collapse
As it stands right now, NO! The reason behind this is because AOSP roms don't have EPST and in order to get CMAA workshop to work you need to dial one of those codes (can't remember which one because is been a while since I messed with that stuff)
If I were you, I would just Nandroid backup your AOSP rom and flash a Sense Rom to work on CMAA Workshop (Sprint Lovers or any other rom that has EPST....not all have them so ask before you download)
thanks for the info n quick response
{ParanoiA} said:
thanks for the info n quick response
Click to expand...
Click to collapse
No Problem!!
Im flashing the sprint galaxy nexus to boost mobile and need to access the Phone Utility Menu (UART/USB Modem & PDA Selection). i have no idea what the dialer code is. Anything from you guys?
Nothing? Please I really need this
Sent from my Nexus 7 using Tapatalk 2
how about telling what you actually want to do? as what you write makes no sense to me
atifsh said:
how about telling what you actually want to do? as what you write makes no sense to me
Click to expand...
Click to collapse
Im flashing the sprint galaxy nexus to boost mobile and need to access the Phone Utility Menu (UART/USB Modem & PDA Selection)
Anything
CooLoserTech said:
Anything
Click to expand...
Click to collapse
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
pdxtechdoctor said:
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
Click to expand...
Click to collapse
I know for a fact its possible as shown here
http://www.boostberryconvert.com/
once i get to change it to MODEM mode im home free
pdxtechdoctor said:
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
Click to expand...
Click to collapse
Well, do you know anybody that got voice and text working? Once i get that working i know how to get the rest
Im giving the via chipset way a shot.
a windows program called efs professional will trigger that menu for ya mate, simply open efs professional and after the adb identifies your phone click the Samsung tools tab then click the drop down menu under Phone Service Apps, select PhoneUtil (Newer Devices) and click launch.
Heres the link to the program
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Guys, does anybody know how to flash zeros to SPC on Spring Galaxy S 3?
I tried almost everything that I could. CDMA WShop says error every time when I try to Write something there. Also WShop cant read SPC as well.
Never had these problems on Galaxy S 2.
escknx said:
Guys, does anybody know how to flash zeros to SPC on Spring Galaxy S 3?
I tried almost everything that I could. CDMA WShop says error every time when I try to Write something there. Also WShop cant read SPC as well.
Never had these problems on Galaxy S 2.
Click to expand...
Click to collapse
Can't be done yet as far as I know. Just spent a few hours tryin myself. Qpst CDMA WS and DFS is all a no go. CDMA WS will give you a successful message if you change the method from default to one that says Samsung but it doesn't actually change.
billard412 said:
Can't be done yet as far as I know. Just spent a few hours tryin myself. Qpst CDMA WS and DFS is all a no go. CDMA WS will give you a successful message if you change the method from default to one that says Samsung but it doesn't actually change.
Click to expand...
Click to collapse
Got the same
I've spent nearly two weeks trying to figure out what happened to my phone and how to restore it. After OTA 4.1.1 (I forced this clearing gsf), in a weak coverage area toggled airplane mode. It wouldn't come back out.
Fastboot flash, CWM, TWRP, dd command, Odin, re-partitioning, nand erase all - any attempt to flash radio-cdma.img hangs or fails.
I can confirm that many of the dire warnings about hard-bricking your device... Well, let's just say that with everything that I've tried, even the bolder attempts in the end, did not brick my device. Odin would always get me back.
Baseband Unknown
IMEI Unknown
My Phone Number Unknown
Everything!!! UNKNOWN
I found some threads on here mentioning CDMA tools and I've downloaded and attempted a couple, it seems that my pc has to have all the supporting programs to make a connection to my phone. The problem is these posts are not specific to my device but the S3 and it seems like a whole lot of trouble when there isn't a 'known' path and specific files for my VZW GNX.
I have also ran emmc check several times and memory checks out good. Sim card has also been replaced.
So I sit here today with 4.1.1 installed (less the radio-cdma.img). I can Odin the older stock images found here on XDA by deleting the radio-cdma.img within. Then use fastboot to flash the 4.1.1 images individually to have a Wi-Fi only device.
I'm willing to try anything. Any takers?
Your meid is smoked. You will need to completely reprogram phone. A restore won't do it Cuz its the serial of the device from factory. You can't fix unless you have msl
*Shaolin Shadowboxing*
Thank you for the reply!
Could you point me in the right direction? Is this done using CDMA tools? I've seen places that mention it can be done via the handset dialpad (other devices). I've found threads that give suggestions on how to contact your carrier to get them to give you the msl... and I've also seen posts that state that Verizon's MSL is almost always 000000. My brain is turning to mush! :cyclops:
Thanks again
JediNinjafication said:
Your meid is smoked. You will need to completely reprogram phone. A restore won't do it Cuz its the serial of the device from factory. You can't fix unless you have msl
*Shaolin Shadowboxing*
Click to expand...
Click to collapse
Verizon msl is usually 000000 you will need either the box device came in or the numbers under battery. The sticky part us going to be the MSID number you'll have to put in. If you have the ORIGINAL nandroid you made immediately after you unlocked bootloader, that one might work but no guarantees. The dialer code is *#*#msl#*#* with msl being the 000000. I believe that's it...could be *#*#spc#*#* with spc being spc and then have to enter msl. The MSID is mobile subsidy identification. Sometimes its NAM. Your MIN would be your phone number..mobile identification number.
If you get into the MEID it will have a couple numbers to enter. The numbers you will need will be your ESN hex and dec. I have all the dialer codes and can pm you a link if you like. Once you finish with the MEID repair that's where the NAM MIN thing will be needed. Unfortunately, the NAM/MSID isn't the same as your number and won't accept all 0's but once the meid is back you might be able to restore but am not positive on that. Can call Verizon and have them refresh phone I believe once meid is restored.
*Step Away From The Toolkit And NoROM Gets Hurt*
I tried the dialer code *#*#000000#*#*
The phone did nothing although as soon as I completed it went the field cleared. I'm on my own. Verizon told me a week ago they were sending me a refurb. Called yesterday and there was no record of another phone being sent out. Rep told me my Sim card was not activated in their system and a ticket was opened to have it unlocked on their network. It should be fixed on their end today. However, I still think I'm going to have to get radio-cdma flashed on my phone. Using getprop (from app market) it appears at some point I may have flashed GSM radios. I say this because there are GSM listings from the getprop output.
Any suggestions?
Sent from my Galaxy Nexus using xda app-developers app
I'd probably return everything to stock first. ##XXXXXXX# and *#*#XXXXXX#*#* codes depend a device's factory ROM.
I'm not convinced it's your MEID though. That alone wouldn't stick your phone without signal and you'd still be able to flash a radio. I'd also be careful not to mess with IMEIs or MEIDs unless you're absolutely certain that's the problem. If you're hell bent on it or you're doing it for fun, not caring of you wreck it, look up MEID repair and read up before messing around.
It wouldn't hurt to try and install a new radio via CDMAWS or a similar program. Just don't change anything you're not familiar with. You can really screw things up with programs like that if you mess around.
Sent from my Galaxy Nexus using Tapatalk 2
I'm pretty sure that my problem is due to flashing GSM on my device. I have not had any luck finding out how to go back. I'll check out CDMAWS... first time hearing about it.
untruestory said:
I'd probably return everything to stock first. ##XXXXXXX# and *#*#XXXXXX#*#* codes depend a device's factory ROM.
I'm not convinced it's your MSID though. That alone wouldn't stick your phone without signal and you'd still be able to flash a radio. I'd also be careful not to mess with IMEIs or MEIDs unless you're absolutely certain that's the problem. If you're hell bent on it or you're doing it for fun, not caring of you wreck it, look up MEID repair and read up before messing around.
It wouldn't hurt to try and install a new radio via CDMAWS or a similar program. Just don't change anything you're not familiar with. You can really screw things up with programs like that if you mess around.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
stwandell said:
I'm pretty sure that my problem is due to flashing GSM on my device. I have not had any luck finding out how to go back. I'll check out CDMAWS... first time hearing about it.
Click to expand...
Click to collapse
Pretty much meid smoked.
Wrong quote..trying to quote above. Just to ensure try *#06# and if it comes back with a string of numbers then you still have the meid. If blank...smoked
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
stwandell said:
I've spent nearly two weeks trying to figure out what happened to my phone and how to restore it. After OTA 4.1.1 (I forced this clearing gsf), in a weak coverage area toggled airplane mode. It wouldn't come back out.
Fastboot flash, CWM, TWRP, dd command, Odin, re-partitioning, nand erase all - any attempt to flash radio-cdma.img hangs or fails.
I can confirm that many of the dire warnings about hard-bricking your device... Well, let's just say that with everything that I've tried, even the bolder attempts in the end, did not brick my device. Odin would always get me back.
Baseband Unknown
IMEI Unknown
My Phone Number Unknown
Everything!!! UNKNOWN
I found some threads on here mentioning CDMA tools and I've downloaded and attempted a couple, it seems that my pc has to have all the supporting programs to make a connection to my phone. The problem is these posts are not specific to my device but the S3 and it seems like a whole lot of trouble when there isn't a 'known' path and specific files for my VZW GNX.
I have also ran emmc check several times and memory checks out good. Sim card has also been replaced.
So I sit here today with 4.1.1 installed (less the radio-cdma.img). I can Odin the older stock images found here on XDA by deleting the radio-cdma.img within. Then use fastboot to flash the 4.1.1 images individually to have a Wi-Fi only device.
I'm willing to try anything. Any takers?
Click to expand...
Click to collapse
Try this if you can http://forum.xda-developers.com/showthread.php?t=1743939
Did you do the *#06# I already think its gonna come back blank but ....what the hell right
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
JediNinjafication said:
Did you do the *#06# I already think its gonna come back blank but ....what the hell right
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Does he have the samsung drivers installed? If so does his computer recognize his phone when plugged in either adb or fastboot? Cause if he does then you can easily go back to stock 4.0.4 IMM76k using my link in above post
MEID definitely smoked. *#06# yields nothing. I have tried flashing back to stock IMM76K but cannot get past radio-cdma flash... it hangs. If I remove the radio-cdma image it stock flashes no problem... but I still don't have MEID when doing that. I believe I flashed GSM ROM or radios at some point. I say this because when in terminal emulator and type getprop, the output has several gsm entries. Verizon is sending me another SIM card. But before I put it in I believe I need to have the GSM stuff off the phone. I'm not quite sure how to do that.
My screen is cracked, Verizon and Samsung can do nothing for me. I'm on my own on this. I have two rumor touch (sprint) that work fine. I also have HTC EVO 4g (Sprint)... been looking at activating on Verizon, but have had no luck getting CDMA tools to recognize phones... even after wiping drivers and re-installing multiple times.
I'm stuck using a very basic Samsung Knack flip at the moment... Sucks big time. Cash is short so I'm trying to make do with what I have.
Still needing help guys and gals!
And thank you all so much for your ideas and suggestions! I have learned a lot!
Sent from my Galaxy Nexus using xda app-developers app
Do you have the box that came with device so can reapply meid? You'll need your msl in order to edit. If have a backup of original stock after you unlocked bootloader..that one might reapply your info. Otherwise you need that mls
Sent from my Galaxy Nexus using Xparent Purple Tapatalk 2
Hi, Guys!
I have the same problem On Samsung Galaxy S3 LTE GT-i9305 - by mistake flashed with ODIN "phone " section ( that means I flashed RADIO ) - as a result No IMEI, NO RADIO-GSM, BASEBAND unknown...(((
Somebody found solution?
Thanks in advance!
My brother is having the same problem with his Galaxy Nexus. Anybody found a fix for this problem?
I just started having this issue the other day as well (baseband/IMEI, etc all unknown). Phone was just sitting on my desk when I noticed it didn't have service. After being unable to flash the cdma radio, I am trying to get the phone back to stock. However, I am unable to flash the stock image because there is a version check for the cdma radio. Is there a way to flash the stock image without the cdma radio check?
ackurv said:
I just started having this issue the other day as well (baseband/IMEI, etc all unknown). Phone was just sitting on my desk when I noticed it didn't have service. After being unable to flash the cdma radio, I am trying to get the phone back to stock. However, I am unable to flash the stock image because there is a version check for the cdma radio. Is there a way to flash the stock image without the cdma radio check?
Click to expand...
Click to collapse
Any luck with yours. I just started having the same problem. My phone freezes and I have no service. I am trying to return to stock using this GUIDE but my phone freezes whenever I try to Flash the CDMA Radio. If I skip that step it doesn't install the stock version and I'm stuck in Paranoid 3.2 and unable to return to the store in the current condition due to warranty issues. If I can make it stock I will go get a new one.
jaymazz13 said:
Try this if you can http://forum.xda-developers.com/showthread.php?t=1743939
Click to expand...
Click to collapse
Just wanted to let others know that I was on a JRO03O rom, decided to return to stock 4.1.1 and must have screwed up something because after getting back up and running I had the same issues as OP. No baseband, IMEI, *#06# was blank, etc. I was about to embark down the path JediNinjafication linked to, but it looked extremely intimidating. Jaymazz's link to Vabeachfc3s reset tool worked like a champ, put me back at at 4.0.4 and all the radio stuff started working right away! Phone updated itself to 4.1.1 shortly thereafter, and it's still going strong.
I need to get into DIAG mode to connect QPST, but ##DIAG# doesn't work (even on the stock rom)
Does anyone know how to do this? I have a VM MarvelC and I'm trying to flash it to Page Plus.
loveVII said:
I need to get into DIAG mode to connect QPST, but ##DIAG# doesn't work (even on the stock rom)
Does anyone know how to do this? I have a VM MarvelC and I'm trying to flash it to Page Plus.
Click to expand...
Click to collapse
Figured out that it's ##PORT# that opens up the DIAG for our phones...
Another question, however.
I manually changed the PRL and now I have no service at all. (Roaming or otherwise)
Just the bars with a big white X over them.
Phone won't dial out to update prl.
Did I screw up the radio somehow? Any idea on how to remedy the situation?
loveVII said:
Figured out that it's ##PORT# that opens up the DIAG for our phones...
Another question, however.
I manually changed the PRL and now I have no service at all. (Roaming or otherwise)
Just the bars with a big white X over them.
Phone won't dial out to update prl.
Did I screw up the radio somehow? Any idea on how to remedy the situation?
Click to expand...
Click to collapse
Change the PRL back to what it was before,that should get it to work
Just out of curiosity,what did you change it to??
csoulr666 said:
Change the PRL back to what it was before,that should get it to work
Just out of curiosity,what did you change it to??
Click to expand...
Click to collapse
Well I'm trying to flash it to Page Plus, so I tried 00002 (Verizon Wireless) and I think 53000 (Page Plus) and then one from the kittwireless.com site called pageplus.prl (I don't know the number)...
I tried flashing an RUU to go back to stock settings and 3-vibe bricked my phone. lol Oops.