Xperia play front housing? - Xperia Play Q&A, Help & Troubleshooting

So i have a dent in my front housing as well as a few cracks (from dropping the phone) , I was wondering if I would have to take apart the whole phone to replace it or if the two screws (which are covered) behind the screen will suffice. Thanks in advance.

Nabeel_Nabs said:
So i have a dent in my front housing as well as a few cracks (from dropping the phone) , I was wondering if I would have to take apart the whole phone to replace it or if the two screws (which are covered) behind the screen will suffice. Thanks in advance.
Click to expand...
Click to collapse
Bump.

To the best of my knowledge you do have to take apart the whole phone.

Does the play have any warranty stickers?

Related

Replacing the lens cover of the camera

The little square plastic cover of my camera lens has got a ding in it. Has anyone else replaced one of these and if so how difficult is it. Also where could I source one from? Thanks in advance.
Sent from my GT-I9100 using xda premium
I replaced the whole back part at a samsung official technical shop because of a scratch but if it's not a scratch, just open it and clean it with pressurised air (but it's a bit risky because you might loose warranty)
here's a guide i googled ... : http://www.youtube.com/watch?v=65pvAINg2ME&feature=related
Hi Nik
Thanks for the reply......
Are you saying it was done by someone else? How much did they charge you? Warranty isn't a consideration but obtaining the part may be difficult.
Sent from my Xoom using XDA Premium HD app
I bought the part from ebay for about 12 CAD shipped and replaced it myself. Quick and easy job, took about 10 minutes altogether.
Great video, it actually looks fairly easy to replace the back cover...thanks man that's a big help
Sent from my Xoom using XDA Premium HD app
Ahhh we must have posted at the same time . Thanks Akusokuzan....out of curiosity, what happened to yours?
Sent from my Xoom using XDA Premium HD app
Hey there,
Are you saying it was done by someone else? How much did they charge you? Warranty isn't a consideration but obtaining the part may be difficult.
Click to expand...
Click to collapse
Yes it was done by samsung's affiliated repair shop in France, it was because le little plastic was scratched very hard with sand (beach etc) so all photos i would take were blured with a white fog
I'm not a huge fan of opening anything except my computer but i'm sure it could be done easily since it's just opening and cleaning (or whatever, i have not really understood what happened to you camera )
to find the part, i found someone on xda that had provided a link to the original parts of the samsung galaxy S2 for like 10 bucks which was very difficult to find because as a french i wasn't knowing the exact word for the "backplate or whatever it is"
now i know it, just google "galaxy S2 original housing" and you'll find plenty results like this one here (assuming you have to change the whole back cover )
and last things it cost me 25€ for the back only with no extra battery cover which is a bit overpriced :V
I actually just wanted to change the mid part to white to have the contrasting black/white lol. just give my phone a bit more character. The hardest part about replacing the housing though was taking the speaker out of the old one and putting it in the new one (where the hump is).
Fixed
Wow...that was easier than I expected. The kit is the same quality as the original as far as I can tell. The case cost me about $30on ebay.
Following the video I'd say that most people could probably repair their phones without too much trouble.
Thanks for your help
Have anybody actually tried to change only the camera lens cover?
I can find the part here on ebay, but I can't seem to find any instruntion or teardown on how to exchange it.
Is it glued on?
Aavar
aavar said:
Have anybody actually tried to change only the camera lens cover?
I can find the part here on ebay, but I can't seem to find any instruntion or teardown on how to exchange it.
Is it glued on?
Aavar
Click to expand...
Click to collapse
Hey Aavar, have you finally replaced the camera lens cover? The rear ones. Have you found a guide for this?
Regards.
skyline_22 said:
Hey Aavar, have you finally replaced the camera lens cover? The rear ones. Have you found a guide for this?
Regards.
Click to expand...
Click to collapse
I've done this, and it's relatively simple.
1. Remove battery cover and battery (you can remove micro sd and sim if you like).
2. Remove the 7 screws with a precision screwdriver, do not lose.
3. Carefully pry back half of phone from front half (I just used my thumb nails), be careful not to lose volume & power buttons.
4. The lens cover has three tabs that enter from the outside of the phone, and fold over on the inside to prevent it moving. Fold these out so that they are vertical (in doing so mine broke, but this does not matter as we are installing a new lens cover).
5. Once tabs are vertical, push lens cover out (this may take some persuasion).
6. Install new lens cover, fold tabs back and put phone back together.
Let me know if you need photos or further details.
chimpdaddy69 said:
I've done this, and it's relatively simple.
1. Remove battery cover and battery (you can remove micro sd and sim if you like).
2. Remove the 7 screws with a precision screwdriver, do not lose.
3. Carefully pry back half of phone from front half (I just used my thumb nails), be careful not to lose volume & power buttons.
4. The lens cover has three tabs that enter from the outside of the phone, and fold over on the inside to prevent it moving. Fold these out so that they are vertical (in doing so mine broke, but this does not matter as we are installing a new lens cover).
5. Once tabs are vertical, push lens cover out (this may take some persuasion).
6. Install new lens cover, fold tabs back and put phone back together.
Let me know if you need photos or further details.
Click to expand...
Click to collapse
Can you give me a link of the piece?
Joost
Thanks for information.
I had the same issue

Replace Chrome trim on SGS2?

I'm trying to find a source on whether I can replace the trim know my phone since it's been dinged from the previous owner as well as myself.
I've found some the link to the replacement screen thread but it doesn't say if the lcd is part of the top or how to get it out? I've seen some oem housings online but not sure if I can remove my lcd which is fine and put it in the newer housing?
Is there glue or adhesive that holds it in?
Thanks for any help.
Sent from my GT-I9100 using xda app-developers app
You just need to unscrew the backplate and exchange it.
No glue no adhesives or something. it just sits there.
It will take about 10 minutes or so..
Here is a picture of the part:
Mine fell out of its place, the last i had the phone opened and i´m to lazy to put it back.
Edit: sorry for that huuuuge picture.. blame our 8mp camera.
supermult said:
You just need to unscrew the backplate and exchange it.
No glue no adhesives or something. it just sits there.
It will take about 10 minutes or so..
Here is a picture of the part:
Mine fell out of its place, the last i had the phone opened and i´m to lazy to put it back.
Edit: sorry for that huuuuge picture.. blame our 8mp camera.
Click to expand...
Click to collapse
Sorry - but I think we have a misunderstanding. I'm talking about the chrome trim around the entire LCD not the camera.
oh.. honestly i don´t think that the part you described is chrome. Atleast not on my GSII
and the thing i posted is the shiny ring around the headphone plug.
OP its not chrome its plastic..
1) replace the whole screen housing with with working parts from say ebay
2) buy a whole SGS2 housing unit and plus top screen ( this option you'll need to remove youe current lcd screen and once replaced in new housing the top screen needs to be bonded to housing. (M3 double sided tape or a thin silcon glue)
3) take it to a service centre
4)keep it as it is..
as par your question
Is there glue or adhesive that holds it in? Yes.
Top screen will need to be heated with hot air to release it from its bond.
Nyssa1104 said:
OP its not chrome its plastic..
1) replace the whole screen housing with with working parts from say ebay
2) buy a whole SGS2 housing unit and plus top screen ( this option you'll need to remove youe current lcd screen and once replaced in new housing the top screen needs to be bonded to housing. (M3 double sided tape or a thin silcon glue)
3) take it to a service centre
4)keep it as it is..
as par your question
Is there glue or adhesive that holds it in? Yes.
Top screen will need to be heated with hot air to release it from its bond.
Click to expand...
Click to collapse
Thanks - that's what I wanted to hear. So it's more effort than I'd like to spend on it. Looks like I'll just move the phone to try something else.

[Q] How to repair a broken screen!?

Hi guys,
I have just broken my Dinc2's glass screen. The underlying LCD screen is still functional and the touch screen works. So, I am guessing that I only broke the glass on the top of the screen... I uploaded pics to make it clear.
The casing near the USB port got bent some time back when I went kayaking... And I think that is where the screen cracked significantly when I dropped the phone.
I can still use the touchscreen and there are no discoloration on the LCD. So, can you guys suggest to me what Screen replacement product I need to buy online and (preferably) give me a link for said product and a How to repair guide. Plus, is this process easy? As in if I spend a few hours carefully following the steps to repair, will I succeed?? Moreover, can I replace the metal casing as well?
Thanks for the help gang! I really need to get my phone back to 100% working condition as I don't have an upgrade available till April '13 and I have cancelled my phone's insurance recently!
EDIT: Does this product help? http://www.amazon.com/gp/product/B0057OO9OC/
http://www.repairsuniverse.com/htc-droid-incredible-2-screen-replacements-repair-parts.html
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
So I have dust under my screen even though my phone is completely original and never been dropped. Do you think it's worth taking apart, cleaning out, and replacing the adhesive? How long do you think it would take, and what is the likelihood of doing more damage to the phone?
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
I bought the following on amazon:
http://www.amazon.com/gp/product/B005GIUHDQ
http://www.amazon.com/gp/product/B0057OO9OC
http://www.amazon.com/gp/product/B002EXHR1Q
I should have probably waited for more replies, like yours, here to get a better product link. Anyway, I guess I bought all the needed parts. I hope I get good quality material and I can get going with the repair... Do you think that they are good? The digitizer and tools didn't ship yet, so I can try and cancel and buy the one from ebay...
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Dermen said:
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Click to expand...
Click to collapse
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
litetaker said:
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
Click to expand...
Click to collapse
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Parts arrived. Links to tutorials PLEASE!
Dermen said:
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Click to expand...
Click to collapse
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
prototype7 said:
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
Click to expand...
Click to collapse
Thanks, captain obvious!
I wanted to know if there is a detailed how to. Anyway, managed to take it apart. All guides end at taking it apart and say, "well, now you know how to dissemble it, just go in reverse and assemble it. Well. I wish they don't do that and show me through the reverse just to avoid mistakes. I remember having to redo IKEA furniture due to missing a few parts. Don't wanna do this messy procedure and realize I forgot a button or worst still putting the screen on!
Anyway, I am a grad student with a bachelors in Engineering... I should be ashamed if I can't do this! :silly:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Dermen said:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Click to expand...
Click to collapse
I am 100% done with the repair. But there are a few issues. The Vibrator motor seems to be not working. Then, the Digitizer I bought doesn't have a hole for the front facing camera! That is not a major setback as I rarely use it and I have a tablet and a PC to skype chat with... But it is sad that a feature is missing.
The big issue is the vibrator not working. I didn't mangle it and put it back in place as I am supposed to. Finally, I have 1 or 2 small dust particles under the screen and that is ok. I couldn't remove all the dust and it is a miracle I managed to get it that clean. Finally I seem to have a slight green tint/screen bleed at top left corner. I didn't have that before and I didn't distort the LCD while replacing. Is it due to a smudge on the LCD there? I suppose it is a minor issue and not something that will amplify as I have a Transformer prime that has screen bleeds and it is apparently because the screws are too tight.. So may be I tightened something too much? Anyway, if it doesn't deteriorate I am ok, as it is a very, very minor problem.
So, bottom line: Main problems > (1) No FFC (due to improper digitizer) -> I don't intend to fix it. (2) Vibrator motor not working.
Can someone help me with 2?
I fricking fixed it! I have WORK to do and I spent about 4 hrs fixing my phone!!! I'm kinda screwed for tomorrow! At least now my phone works...
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Dermen said:
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Click to expand...
Click to collapse
The following are the images of my fixed and "pimped" Dinc2.
https://www.dropbox.com/s/beop9oqvn6qo9p5/2012-09-25 00.23.03.jpg
https://www.dropbox.com/s/qh62damm82z0qmu/2012-09-25 00.22.32.jpg
Is the two tone color combination looking sweet, or should I change the back to red as well? I have a spare black back cover. If anyone has a spare red back cover, I can trade!
Plus, the "smudge/screen bleed" at the top left edge is seen in this pic:
https://www.dropbox.com/s/illeve11tomyrtw/2012-09-25 00.54.23.jpg (The black spot on the middle of the left side is a dust spec!)
Close up: https://www.dropbox.com/s/9ys4r2e6xmxfhnh/2012-09-25 00.54.48.jpg
Is the smudge bad? I think it is just a smudge on the LCD and not a damage to the LCD right? In that case, I am cool, as I most likely will cause other smudges if I attempt to redo it anyway. Plus, I am kinda bummed out about the lack of FFC, but I hardly use it and the whole process of removing the screen is SOOO tedious (and I don't have a heat gun, so had to put my phone a feet above a gas burner! ) and it was so painful and stomach wrenching to safely remove the LCD/digitizer that I don't wish to do it again to repair the FFC...
So, what do ya say?
I think the two tone looks good since the red phones have all black accents. I thought it was weird that the speaker on the red phone is silver, while all the other accents are black.
There seems to be a problem with the adhesive. The digitizer is raised by about 1 millimeter at the top while it is attached better at the bottom. I think it is because I had an additional horizontal strip of adhesive at the bottom to attach the digitizer to both the LCD and the buttons firmly while I didn't put such a horizontal strip at the top as I didn't see one when I dissembled it. If I put pressure on the digitizer for a while, it sets back in place for about half a day. Is this a serious problem? I don't feel like dissembling again.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
I just broke my screen and im looking to go the same route. This is a good phone to have as a back up after i get my upgrade and i dont want to get rid of it.
Anyway, did you need all those parts to successfully change your screen? I thought if you bought a new housing you would not need the adhesive tape?

[Q] Something about Bezel Frame Cover Panel

Hey guys
Can I just replaces the middle housing without replaces my lcd digitizer
I want to buy a set of housing cover on ebay.
I am afraid my original lcd digitizer won't be able to stick back to middle housing
benhu said:
Hey guys
Can I just replaces the middle housing without replaces my lcd digitizer
I want to buy a set of housing cover on ebay.
I am afraid my original lcd digitizer won't be able to stick back to middle housing
Click to expand...
Click to collapse
There are a lot of videos on youtube showing the correct method replacing the Housing. It does require a little effort though. but very simple tools needed and if you a buy a good product then the lcd can easily fit correctly into the housing.
Ous galaxy SII phones have the Bezel and the LCD unit stuck together, so you need to Blow Dry the Bezel with a hair drier and slowly remove it. and then putting them back together is pretty easy. Hope this helped
sandip.banik said:
There are a lot of videos on youtube showing the correct method replacing the Housing. It does require a little effort though. but very simple tools needed and if you a buy a good product then the lcd can easily fit correctly into the housing.
Ous galaxy SII phones have the Bezel and the LCD unit stuck together, so you need to Blow Dry the Bezel with a hair drier and slowly remove it. and then putting them back together is pretty easy. Hope this helped
Click to expand...
Click to collapse
Thanks for your reply
I just disassembled my GS2 and i find it is pretty hard to push out the screen, how can i push it out without cracking the screen?
sandip.banik said:
There are a lot of videos on youtube showing the correct method replacing the Housing. It does require a little effort though. but very simple tools needed and if you a buy a good product then the lcd can easily fit correctly into the housing.
Ous galaxy SII phones have the Bezel and the LCD unit stuck together, so you need to Blow Dry the Bezel with a hair drier and slowly remove it. and then putting them back together is pretty easy. Hope this helped
Click to expand...
Click to collapse
Is it possible to keep the old display(lcd + screen) while changing the bezel?
I don't want to pay money to buy a new one as my display is fine.
Sent from my GT-I9100 using xda app-developers app
benhu said:
Is it possible to keep the old display(lcd + screen) while changing the bezel?
I don't want to pay money to buy a new one as my display is fine.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
benhu said:
Thanks for your reply
I just disassembled my GS2 and i find it is pretty hard to push out the screen, how can i push it out without cracking the screen?
Click to expand...
Click to collapse
Yes there is a solution to that. You need a Guitar Picker or similar kind of a tool to get the LCD out.. but first of all, remember to use a HAIR DRIER to Blow all over the BEZEL, so that, the adhesive gets a little moist and loose. then, slowly, using the Guitar picker/plastic tool, u need to start from one curved end and go around the entire screen , lifting the LCD. Make sure u do this carefully, if not, then you have a high chance of breaking the LCD. You can consult to this video: http://www.youtube.com/watch?v=IiWFf_zy0hI by DuraPower Global. please be careful
and yeah, You will be Void of your phone's warranty
sandip.banik said:
Yes there is a solution to that. You need a Guitar Picker or similar kind of a tool to get the LCD out.. but first of all, remember to use a HAIR DRIER to Blow all over the BEZEL, so that, the adhesive gets a little moist and loose. then, slowly, using the Guitar picker/plastic tool, u need to start from one curved end and go around the entire screen , lifting the LCD. Make sure u do this carefully, if not, then you have a high chance of breaking the LCD. You can consult to this video: http://www.youtube.com/watch?v=IiWFf_zy0hI by DuraPower Global. please be careful
and yeah, You will be Void of your phone's warranty
Click to expand...
Click to collapse
Thank you
This is useful
Sent from my GT-I9100 using xda app-developers app
benhu said:
Hey guys
Can I just replaces the middle housing without replaces my lcd digitizer
I want to buy a set of housing cover on ebay.
I am afraid my original lcd digitizer won't be able to stick back to middle housing
Click to expand...
Click to collapse
You will need to thoroughly heat the top and bottom of the front, and the screen on the back as well. AMOLED panels are extremely fragile - even a single hairline crack on the very edge of the screen (maybe where you pry the screen) will destroy the panel.

[Q] LG G3 Cracked Lens Problem

So the camera lens for my G3 broke. I didn't drop it or anything, it just broke. I bought a replacement part just for the lens cover. When I was trying to take apart the lens, I noticed that it has a seal on the top that keeps the lens cover connected. Can i take off the cover or will there be problems because of the seal? I've attached a link so you guys know which part I'm talking about.
http://www.ebay.com/itm/OEM-BLACK-GREY-CAMERA-FRAME-SURROUNDING-HOLDER-COVER-LENS-FIX-For-LG-G3-D855-/141389511151?pt=US_Other_Cell_Phone_Accessories&hash=item20eb78b9ef
Coach Lou said:
So the camera lens for my G3 broke. I didn't drop it or anything, it just broke. I bought a replacement part just for the lens cover. When I was trying to take apart the lens, I noticed that it has a seal on the top that keeps the lens cover connected. Can i take off the cover or will there be problems because of the seal? I've attached a link so you guys know which part I'm talking about.
Click to expand...
Click to collapse
Are you trying to take the glass out of that piece you linked to, and attach it to the one on your phone? It seems it would be easier to replace the entire piece rather than just the glass.
If not, I suspect the seal is designed to hold the glass in place and prevent dust from getting inside the assembly. As long as you make sure the new glass piece is sealed somehow (glue?), it will probably be OK. But I've never done this, so to some extent I'm guessing.
Update?
Coach Lou said:
So the camera lens for my G3 broke. I didn't drop it or anything, it just broke. I bought a replacement part just for the lens cover. When I was trying to take apart the lens, I noticed that it has a seal on the top that keeps the lens cover connected. Can i take off the cover or will there be problems because of the seal? I've attached a link so you guys know which part I'm talking about.
http://www.ebay.com/itm/OEM-BLACK-GREY-CAMERA-FRAME-SURROUNDING-HOLDER-COVER-LENS-FIX-For-LG-G3-D855-/141389511151?pt=US_Other_Cell_Phone_Accessories&hash=item20eb78b9ef
Click to expand...
Click to collapse
Hi - what was the outcome for this? The same thing has happened to my phone and I see that part you linked. Could you explain whether you installed the part and whether your problem was because you were trying to separate just the glass from the part or whether you had trouble with just removing and then installing that new part. Some pics to help us out?
Thanks.

Categories

Resources