Not by choice...my S2's power button is sticking when I press down on it and even with a small tap (without actually pushing down), it will bring up the power menu and such. It's causing complete havoc and keeps putting me into a Sleep of Death. I've tried ODINing and everything back to stock but it's definitely a hardware malfeasance. I still have my warranty so my next step will be sending it in for a replacement.
Until then I'm on the Samsung Captivate. UGH lol...if any of you ever had it, it's soo difficult to adapt to after having a Vibrant/TMo S2. So much ODINing and flashing of CWM and kernels JUST to get to CM10. I've been in a recovery boot loop for the last 2 hours and finally got it right (I'm not even sure how lol). Anyways this is the end of my rant/venting.
Hope you have a good night and a great next day.
Replace the actual power switch. Youll be back in no time.
tri4life said:
Replace the actual power switch. Youll be back in no time.
Click to expand...
Click to collapse
Yeah I was gonna but I'm better off replacing this one. My USB port is iffy at best and only mounts as mass storage like half the time. I was okay as long as it charges but it's too much of a hassle to buy and replace multiple parts
tri4life said:
Replace the actual power switch. Youll be back in no time.
Click to expand...
Click to collapse
I would love to know where to get one, please provide me with the URL to the item page.
Don't seem to see any on ebay that is for T989.
Thank you
http://forum.xda-developers.com/showthread.php?t=1822609
I have started using this apk to save hardware
Sent from my SGH-T989 using xda app-developers app
My phone has this same issue and quite frankly I hate it. Maybe I can get a warantee exchange for another device.
teruyume said:
I would love to know where to get one, please provide me with the URL to the item page.
Don't seem to see any on ebay that is for T989.
Thank you
Click to expand...
Click to collapse
Hey did you or anybody find a part number or even a cheap phone we can harvest this button from ??
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Highly recommended, $35 and I had my phone back in 10 days, they didn't even factory restore it. It still had my CM and apps on it and its been working fine ever since.
Sent from my SAMSUNG-SGH-T989 using xda premium
You guys beat your phone to hell
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I'm aware of that just saying I can do it myself if I can locate an equivalent part. Already have the old one off - put a charged battery in and phone didn't even start up by itself
This could be it. eBay item: 271084653175
Btw is there any other way to turn this phone on without using the power button ?
Did anyone ever find a source for buying a new power button?
drLouie said:
Did anyone ever find a source for buying a new power button?
Click to expand...
Click to collapse
Here you go! They'll fix it for you!!
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
I had the same problem with my T989D (Telus Hercules). I was four days outside my warranty, but Samsung was kind enough to authorize a warranty repair.
I thought they were going to replace the button, instead they replaced the entire PBA/Mainboard.
The notes indicate: PBA REMPLACE - PAS D'ALIMENTATION (PBA replaced - no power)
So new button, mainboard, and connector for the usb at the bottom, everything works beautifully, couldn't be happier.
LoopDoGG79 said:
Here you go! They'll fix it for you!!
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Click to expand...
Click to collapse
I had heard about them, and everyone seems to like them, I was just going to do it myself if I could find the part. I figured me getting the part / putting it in would be less time than shipping it to them and getting it back.
drLouie said:
I had heard about them, and everyone seems to like them, I was just going to do it myself if I could find the part. I figured me getting the part / putting it in would be less time than shipping it to them and getting it back.
Click to expand...
Click to collapse
35 to much?
LoopDoGG79 said:
35 to much?
Click to expand...
Click to collapse
No, like I said I was trying to do it in less time. Plus after you pay them express it takes it to $70, still reasonable but it was all about timing.
I sent mine to smsung is it covered
Sent from my LG-LS855 using xda app-developers app
don728871 said:
I sent mine to smsung is it covered
Click to expand...
Click to collapse
I've had mine more than a year, so Samsung wouldn't cover mine (or at least that is my understanding).
drLouie said:
I've had mine more than a year, so Samsung wouldn't cover mine (or at least that is my understanding).
Click to expand...
Click to collapse
Didn't this phone come out in June of this year
Sent from my LG-LS855 using xda app-developers app
Related
Wtf..my button just started to do the see saw and loose thing. Did anyone find a solution other than getting a new phone?
Sent from my SPH-L710 using xda premium
danielddube said:
Wtf..my button just started to do the see saw and loose thing. Did anyone find a solution other than getting a new phone?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
A solution to what exactly? This is the first i've ever read of an S3 power button issue. What is the "see saw and loose thing" exactly? Any pictures?
I have the same problem, from my understanding Sprint considers it a "cosmetic" issue and will not replace/fix for free. Your options are to send to Samsung for warranty repair or place a Sprint TEP claim which will cost and you will receive a refurbished phone.
http://forum.xda-developers.com/showthread.php?p=32735571
Sent from my SPH-L710 using Tapatalk 2
ClutchR1 said:
I have the same problem, from my understanding Sprint considers it a "cosmetic" issue and will not replace/fix for free. Your options are to send to Samsung for warranty repair or place a Sprint TEP claim which will cost and you will receive a refurbished phone.
http://forum.xda-developers.com/showthread.php?p=32735571
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Well, that stinks
Definitely a factory defect. Have both ET and S3. No issues with the power button.
Just buy the button online. It snaps in.
Also, they get loose when you take off a case that you have to stretch to wrap on to the phone if you arent careful. It can catch the edge of the button as you pull the case off.
Just pull the case away from the volume and power buttons as you pull the case off.
DAvid_B said:
Just buy the button online. It snaps in.
Click to expand...
Click to collapse
Sorry to pull up an old thread but I have searched and searched and can't find any answers but ....
Did anyone find out if this fixed it? My phone just started the same thing yesterday and now will not lock or unlock the screen or go to the power menu !
This problem is called "sudden death syndrome" its a huuuuuuge factory defect you actually have to solder on a new one or you're screwed
Sent from my SPH-L710 using xda app-developers app
I have the Best Buy Protection Plan. One of the reasons I have it is because of stuff like this. I had the Sprint TEP, till they changed it. My buddy had this happen to his SGS3. The Power Button left the party. Because of an error on his part he had both Sprint TEP, and the BBPP ( Best Buy Protection Plan ) . He went to Sprint, and they said they he had to contact Samsung. He went to BB the same day. They sent the Device out for repair, and gave him a loaner. Next day they notified him he would be getting another device in the mail. He received it two days later. Returned the loaner, and all good.
I hardbricked my S3. I messed up, I know. It was my fault that I didn't notice that the Slimbean was only for the international version. I have been looking online for a solution, but all I'm seeing is that I have to get a new phone. I cannot access Recovery or Download mode with or without the battery in while or while not plugged into the computer. Though, while the battery and SD are out, the charging/notification light will light up when plugged into the computer for about one minute, but that's it. Is there anyway to turn it into Sprint for a new one? It's been under a month. So...any advice?
Have you looked into this http://forum.xda-developers.com/showthread.php?t=1727171
Where did you find the rom that you flashed?
Wikd said:
Have you looked into this http://forum.xda-developers.com/showthread.php?t=1727171
Where did you find the rom that you flashed?
Click to expand...
Click to collapse
Looked at it, but I can't get my phone to go into Download mode, like I said. Whenever I plug it into the computer, it does nothing unless I have the battery out.
I got the rom from here.
http://slimroms.net/index.php/112-supported-device-list-cat/181
Methos013 said:
Looked at it, but I can't get my phone to go into Download mode, like I said. Whenever I plug it into the computer, it does nothing unless I have the battery out.
I got the rom from here.
http://slimroms.net/index.php/112-supported-device-list-cat/181
Click to expand...
Click to collapse
ahh, I'm not too familiar with Samsung or bricks, just trying to help, im sure this is stressful for you. I read some of the post I linked above and it says a USB jib might work. Here's a link to make one if you want to try http://forum.xda-developers.com/showthread.php?t=1331782
Check your pm and good luck.
Wikd said:
ahh, I'm not too familiar with Samsung or bricks, just trying to help, im sure this is stressful for you. I read some of the post I linked above and it says a USB jib might work. Here's a link to make one if you want to try http://forum.xda-developers.com/showthread.php?t=1331782
Check your pm and good luck.
Click to expand...
Click to collapse
I don't have a sodering tool. With it being the holiday season, ordering online for a premade one will take longer than I can go without a phone.
dude thats a very simple soldering job. you can get a soldering iron for like 5 bucks at radioshack, with solder. all those parts can be bought there, and the wire you can just rip a phone cord out of the wall lol
ou2mame said:
dude thats a very simple soldering job. you can get a soldering iron for like 5 bucks at radioshack, with solder. all those parts can be bought there, and the wire you can just rip a phone cord out of the wall lol
Click to expand...
Click to collapse
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
Couldn't of said it better.
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
Can I go to an authorized Sprint retailer/satellite store or an official Sprint store? Just gonna say it died and won't take a charge anymore.
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
did you mean to quote me? i was just commenting on him saying he didn't have a soldering gun... i'm not saying if it will work or not, but if he did want to try it, it's a fairly simple object to make, with very simple and cheap tools. i don't have to search to know that it's just a few resistors and a male micro usb plug, maybe 15 bucks for everything including the soldering iron.
if you have insurance you can go to a sprint repair store and get it replaced for free... it usually takes about 2 days for your replacement to come in..
http://storelocator.sprint.com/locator/
xTmDarren said:
if you have insurance you can go to a sprint repair store and get it replaced for free... it usually takes about 2 days for your replacement to come in..
http://storelocator.sprint.com/locator/
Click to expand...
Click to collapse
That is what I'm planning on doing tomorrow.
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1798981
The AOKP I am using for Sprint Galaxy S3.
Very nice. Works well. Love the emoji and custom ability.
--------------------------------------------------------
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.
Smh...
Sent from my SPH-L710 using XDA Premium HD app
DirtyShroomz said:
Smh...
Sent from my SPH-L710 using XDA Premium HD app
Click to expand...
Click to collapse
I know, foolish. Coming from the OG Evo, I didn't have to worry about seeing if it was American or International and which carrier it was for. I'm being more careful this time.
Call samsung say the phone died and won't come on. They will replace it as long as there is no physical damage. One year manufacture warranty is still valid use it f sprint don't waste your time. Samsung is fast at sending you a new or refurbished phone. I had several phones replaced. They send you a new phone or used phone and a box to send your old one. They don't check for rooting or nothing they just install new software on the phone and send it out to the next person. Now ups is my issue with the entire process, they Just leave it on your door step even if your not home it happened twice thank god no one stole my phone, I thought we were supposed to sign for it but I guess not.
Sent from my Nexus 7 using XDA Premium App
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
Happened with my wife's phone as well. Full charged then it just shut down. Tried everything and nothing. Sprint told me it was fried.
Sent from my Samsung (Apples are meant to be eaten) Galaxy S3
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
well damn the sprint places around here told me I had to wait to get another one
Glad you were able to get a replacement. Now use protection when you flash
Haha
Sent from my SPH-L710 using Tapatalk 2
SO... My wife recently learned that it's not a great idea to charge your phone with a frayed USB cable. Had I known she was doing this, I would have put a stop to it. Sadly, the OG doesn't work. I can get a flash from the LED and a flash from capactive keys, but no download mode, battery pull does nothing and can't get the computer to recognize it. I'm going to make a few more efforts to revive, but I think it's done. PM me if you are interested and once I'm certain that it's completely gone I will donate.
The silver lining here is that my OG still works and I love it as much as ever.
Hey I've heard a legitimate battery pull fixes this if you're willing to do a tiny bit of manual labor
stevek216 said:
Hey I've heard a legitimate battery pull fixes this if you're willing to do a tiny bit of manual labor
Click to expand...
Click to collapse
hmmm.... Have not seen the legitimate battery pull done. Do you know where I can find instructions for this?
Xiutehcuhtli said:
hmmm.... Have not seen the legitimate battery pull done. Do you know where I can find instructions for this?
Click to expand...
Click to collapse
I think it's this one. http://forum.xda-developers.com/showthread.php?t=2108154
engine95 said:
I think it's this one. http://forum.xda-developers.com/showthread.php?t=2108154
Click to expand...
Click to collapse
No, that's the write up that I based my video on. I assumed stevek216 was referring to actually removing the battery from the phone.
Thank you though!
Xiutehcuhtli said:
No, that's the write up that I based my video on. I assumed stevek216 was referring to actually removing the battery from the phone.
Thank you though!
Click to expand...
Click to collapse
Oops. Guess I should have read it before posting. Anyway... Nice video.
Sent from my LG-LS970 using XDA Premium 4 mobile app
I'm not sure where to find instructions. It takes a weird screwdriver but other than that I think it's just a matter of taking out the bottom screws, removing the back, and carefully disconnecting and reconnecting the battery
You try taking it to sprint? Has it been a year since you got it?
Sent from my LG-LS970 using xda app-developers app
PartimusPrime said:
You try taking it to sprint? Has it been a year since you got it?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
No and No. We didn't buy the phones from Sprint so we have not spoken with them about it. Certainly doesn't help that there isn't a corporate store or repair facility anywhere near me.
If you don't want to do anything with it, send it to me. Would love spare parts lol.
Xiutehcuhtli said:
SO... My wife recently learned that it's not a great idea to charge your phone with a frayed USB cable. Had I known she was doing this, I would have put a stop to it. Sadly, the OG doesn't work. I can get a flash from the LED and a flash from capactive keys, but no download mode, battery pull does nothing and can't get the computer to recognize it. I'm going to make a few more efforts to revive, but I think it's done. PM me if you are interested and once I'm certain that it's completely gone I will donate.
The silver lining here is that my OG still works and I love it as much as ever.
Click to expand...
Click to collapse
I recently sold my LG and moved to the Moto X; however, if you donate it to me. Hopefully I can try to revive it and see if I can start some builds with it.
Can you send me a back cover? Mine is cracked and I want to replace it.. Thanks!!
Sent from my Nexus 4 using xda app-developers app
AdriVelazquez said:
I recently sold my LG and moved to the Moto X; however, if you donate it to me. Hopefully I can try to revive it and see if I can start some builds with it.
Click to expand...
Click to collapse
I will keep you updated, have a few last things I am going to try before officially giving up.
jonahly said:
Can you send me a back cover? Mine is cracked and I want to replace it.. Thanks!!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Maybe something could be done to coordinate swapping the backs since it sounds like you just cracked the glass and he would only be using it as a dev phone. Like I mentioned in the previous post, I have a few last ditch efforts to try and then will be officially giving it up if they don't work.
Xiutehcuhtli said:
Maybe something could be done to coordinate swapping the backs since it sounds like you just cracked the glass and he would only be using it as a dev phone. Like I mentioned in the previous post, I have a few last ditch efforts to try and then will be officially giving it up if they don't work.
Click to expand...
Click to collapse
I don't mind you sending it first to him to remove the black plating and then mailing me the device with the cracked back plating.
Also, if I happen to revive and you still want it, I'll send it back to you.
sprint doesnt usually care if its warranty or not, ive gone in and had them fix just about anything and they charge me the standard 35 dollar fee if you dont have insurance, the only thing they dont cover is screen/water damage. screens are 100 i believe to swap.
damn i need the back plate too
I'd be willing to send you some money for your front assembly! I got screwed by a Chinese seller when I bought a replacement for my cracked screen. The new screen registered touches constantly when I'll not touching the screen, scratches and discoloration on the ACTUAL LCD (ie not the glass) and my volume buttons got borked during the swap $95 well spent... So I'd could definitely use it since its my daily driver right now. I'd love you man!
Sent from my LG-LS970 using xda app-developers app
Take it by a Sprint Store or even call over the phone to Customer Care. If you have Insurance they will replace it for free, if you don't they will charge you $75 to replace it!
_Epic said:
Take it by a Sprint Store or even call over the phone to Customer Care. If you have Insurance they will replace it for free, if you don't they will charge you $75 to replace it!
Click to expand...
Click to collapse
Will they open it up and see that I have taken the tape off the battery terminal and tell me to take a hike? Also, does it matter that I didn't purchase it from Sprint?
Anyone have any idea how to disassemble this tablet? The power button on mine has become a bit 'sticky'.
I imported this tablet so my local Samsung won't cover it under warranty
starsky23 said:
Anyone have any idea how to disassemble this tablet? The power button on mine has become a bit 'sticky'.
I imported this tablet so my local Samsung won't cover it under warranty
Click to expand...
Click to collapse
You want to disassemble it it for a sticky Power button? Does the sticky power button stop you from using the tablet properly ie. Does it swicth off the display on its own...If not I would honestly just leave it alone. Opening it up can cause loads of other problems.
If you read the Warrenty i think it does say that Samsung May attempt to fix the problem even if the tablet is from another part of the world. Worth giving them a call if you havent done so already.
Geordie Affy said:
You want to disassemble it it for a sticky Power button? Does the sticky power button stop you from using the tablet properly ie. Does it swicth off the display on its own...If not I would honestly just leave it alone. Opening it up can cause loads of other problems.
If you read the Warrenty i think it does say that Samsung May attempt to fix the problem even if the tablet is from another part of the world. Worth giving them a call if you havent done so already.
Click to expand...
Click to collapse
It does jam and sometimes reboots the tablet.
The local Samsung service centre told me that they'll need to replace the entire chrome bezel (what a load of nonsense). They'll give me a quote by tomorrow but I honestly doubt I'll pay whatever that is!
starsky23 said:
It does jam and sometimes reboots the tablet.
The local Samsung service centre told me that they'll need to replace the entire chrome bezel (what a load of nonsense). They'll give me a quote by tomorrow but I honestly doubt I'll pay whatever that is!
Click to expand...
Click to collapse
This happebed on my S3, all i did was I kept pressing it like a maniac LOL and its now fixed. I was going to get it fixed for £75 but getting angry for once worked. Give it a go you never know.
Geordie Affy said:
This happebed on my S3, all i did was I kept pressing it like a maniac LOL and its now fixed. I was going to get it fixed for £75 but getting angry for once worked. Give it a go you never know.
Click to expand...
Click to collapse
I have to say, despite being very cynical when I first read your suggestion...... It actually worked!
It's not 100% perfect but definitely bearable if the repair cost is humongous. Thanks a lot mate!
Sent from my SM-P600 using Tapatalk 4
starsky23 said:
I have to say, despite being very cynical when I first read your suggestion...... It actually worked!
It's not 100% perfect but definitely bearable if the repair cost is humongous. Thanks a lot mate!
Sent from my SM-P600 using Tapatalk 4
Click to expand...
Click to collapse
Nee worries, glad I could help
So I'm not new by any means to xda or fixing electronics of any sort so I'd not be here asking for ALL possibilities of assistance I can get. .. Throw any possible solution you can my way as it can't hurt to try most ideas.
I'm working on my brothers SPRINT model galaxy S3. This thing is in pristine condition never dropped always in his Otterbox.
It will not power on so I cannot get into download mode however I can, if I finagle it enough get glimpses of the screen flashing on so I can see the battery icon for 5 seconds like it wants to power on
He bought a brand new battery direct from Samsung yet when plugged in via Samsung Wall charger nothing. .. No charging light zilch. If I try the USB charger that came with it nothing either.
No lights. No powering on. No way to get into download mode to try to bring it back from literally working before going to bed then he said he woke up and it was like a brick.
Any idea if there is a way to get this working again seeing that I get no power at all?
Thanks
Sent from my SPH-L720 using XDA Premium 4 mobile app
dead s3
Jessooca said:
Just wondering if making a USB jig might be worth a shot to get this at least into download mode
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
power button is bad sudden death syndrome on the s3 replace the power button theyre cheap
Jessooca said:
Just wondering if making a USB jig might be worth a shot to get this at least into download mode
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'd have to agree with @MIKEY309 on this one. It sounds like a power button issue. I would think you'd have at the least a charging light, because even when it's powered off it displays a charging battery on the screen. Jigs are cheap and easy, and good to have on hand, so I say give that a shot, at least, and if that doesn't work, then go the button route. Good luck!
MIKEY309 said:
power button is bad sudden death syndrome on the s3 replace the power button theyre cheap
Click to expand...
Click to collapse
Sent from my SPH-L710 using XDA Premium 4 mobile app
It must likely is the power button, but try pulling the battery out & give it about ten minutes… put the battery back in & try powering it back up. I know it sounds stupid but give it a try, I had something like this happen to me before & this worked for me. Good luck.
Jessooca said:
Thanks guys, I was actually pretty sure it was the ever so infamous failed power switch on the board, which everything I have done and tried suggests so. I just thought perhaps maybe there was a possibility it could be fixable without having to get that power switch replaced.
I can slap it against my leg and voila, it always vibrates and attempts to power on, sometimes It'll stay powered on, I did get it into download mode and used a stock firmware file to Odin it back to stock, my only concern is that darn Custom Binary Trip counter now, I may just find a local shop to see if they'll replace it for less than $50 I am also considering buying a bad esn/ or cracked screen Sprint SIII to swap out the boards with, unless someone has one to donate. For now though I'll be without a phone until I can afford to get it replaced.
Thanks again!
Click to expand...
Click to collapse
Sprint don't care if your rooted...if it's that button they should take care of you
because it's such a known issue.
http://i.imgur.com/qrByUGN.jpg
I know this is going to sound too simple to work. But have tried blowing Compressed Air on the power button ? The kind that's used on keyboards.
prboy1969 said:
I know this is going to sound too simple to work. But have tried blowing Compressed Air on the power button ? The kind that's used on keyboards.
Click to expand...
Click to collapse
I forgot all about that man...I've hear it working for others...sometimes little debris gets in there and messes it up...I'd definitely try this.
http://i.imgur.com/qrByUGN.jpg
Jessooca said:
I got this issue fixed the other day by making my own JIG and now I am working on a new problem, in a whole new thread. LOL I will get this phone working again! muahahahahahahahahahaha
Currenty I have NO data not sure why but I can't update profile/prl as I have a big fat O with a diagonal line through it, the ever so infamous "NO" symbol. I have no problems with wifi but alas NO data.
Any clues if there is a way to restore say "efs" or something to that effect to give me data back?
Click to expand...
Click to collapse
What Rom and modem combination are you running? Have you ran the activation reset now that you're up and running? (##72786#), without the parentheses of course .
Sent from my SPH-L710 using Tapatalk