Develop Bugs

Guys i fear my phone has bitten the dust;(

This morning i just flashed the new froyo rom that the xda guys had made and it said if you was experiencing any led problems to go into adb and delete a file.
I went into adb and mounted the system, but didnt delete a file, when i came out i didnt exit, i just pulled the usb cable,
is it possible that my system is still mounted and is stuck?
when i rebooted i am stuck on a boot loop from the first htc screen and i have no way of getting into recovery...
I dont think this is a usb brick as i didnt flash anything,
im not sure what to do now;(
I cant even flash a new ruu from fastboot;(
Hope you guys can help
JD

Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.

Im not sure if this is a usb brick or not? I think with usb bricks you can still flash a ruu from fastboot, where as i cant;(

infexis said:
Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.
Click to expand...
Click to collapse
I cant get into recovery;( at all;(

getting a device not found when trying to get into recovery, i am completly stuck;( painful times;'((

You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?

Rudolfje said:
You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?
Click to expand...
Click to collapse
i get stuck at the first htc screen boot loop, cant boot without sd neither;(

i also cant flash a ruu from fastboot;(

also im not sure how to go about unbricking if its unbricked, the instructions are not very clear on modaco, and also i was using the brafrorom4 and im not sure how i would go about making a mtd0.img with that rom.
Completly bamboozled;(

JupiterDroid said:
i also cant flash a ruu from fastboot;(
Click to expand...
Click to collapse
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?

Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?

@ngel said:
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?
Click to expand...
Click to collapse
I have not tried that, how would i go about doing that mate?

JupiterDroid said:
I have not tried that, how would i go about doing that mate?
Click to expand...
Click to collapse
Just boot your Desire with volume-down pressed and once in the HBOOT, select RECOVERY; then, as the red triangle screen appears press volume-up and power until you reach a blue recovery console that has a "Flash from sdcard" menu entry.
Copy a stock ROM to your sdcard and flash it.
I've never tried that, but I readed that the console is able to flash HTC signed stuff, so give it a try...

EddyOS said:
Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?
Click to expand...
Click to collapse
i can get into hboot fine

JupiterDroid said:
i can get into hboot fine
Click to expand...
Click to collapse
how can i flash a ruu from the phone? i thought it had to be done from windows?

JupiterDroid said:
how can i flash a ruu from the phone? i thought it had to be done from windows?
Click to expand...
Click to collapse
Two posts above.

@ngel said:
Two posts above.
Click to expand...
Click to collapse
cheers mate, will give it a try now

it wont flash, it has a signature failure

JupiterDroid said:
it wont flash, it has a signature failure
Click to expand...
Click to collapse
Are you trying a stock, untouched HTC ROM?

@ngel said:
Are you trying a stock, untouched HTC ROM?
Click to expand...
Click to collapse
yes i beleve so, i had to rename it to update.zip to be able to flash,
i tried to flash the PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.zip rom

help me, how do I reboot in recovery?

Hi
For many days I have been sitting here and read and read and read trying to reboot my phone into recovery mode, I have not succeeded in this, can someone explain how I should do in a simple way?, my phone is rooted and have unlocked boat loader, can I install clockwork fashion?, and how do I do that?
The reason why I want to be able to reboot in recovery mode is that I have tried the "kitchen" here!

Install Doom's kernel and press back buton at boot when the lights light up to enter recovery.
Sent from my iPad 2 using Tapatalk

i think you should press on the volume down(a few times) key when you reboot youre device and see the animation.

gabimx said:
i think you should press on the volume down(a few times) key when you reboot youre device and see the animation.
Click to expand...
Click to collapse
Hold down volume - key when you phone boots up and it works too.
Anyway you need flash xperia recovery. This is simple and use search...
Regards
Taavi
Sent via my FXP046 MT15i®

shysstkille said:
Hi
For many days I have been sitting here and read and read and read trying to reboot my phone into recovery mode, I have not succeeded in this, can someone explain how I should do in a simple way?
Click to expand...
Click to collapse
This is what the stickys are for.
XperienceD said:
To use the CMW on a Stock ROM you will need to have Un-Locked Bootloader and run the RecoveryArc.img from the Computer, but if you use a Custom Kernel such as DoomKernel, or a Custom ROM such as CyanogenMod it comes as Standard. You can find the RecoveryArc.img HERE
Click to expand...
Click to collapse

XperienceD said:
This is what the stickys are for.
Click to expand...
Click to collapse
Hi
What means with custom kernell?,the data that already exits on my phone do I have to wipe that when I install a custom kernel?, do you mean clockworkmode when you say that it come as standard?
Don´t I need to take a backup on my "kernel" that I have in my phone now?

Is my MB526 bricked?

Was running CM10-20120804-NIGHTLY-mb526 successfully, but having some performance issues, by following this process:
1) Go to Stable Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-2012xxxx-NIGHTLY-mb526.zip.
6) Flash Gapps and Battery fix for red lens.
7) Wipe Cache and Dalvik again (recommended).
8) Restart.
(http://forum.xda-developers.com/showthread.php?t=1795647)
I only thing I hadn't done was flash the gb Kernel, so I thought I'd try that to ensure I followed the full process. I received advice to reinstall this kernel-froyo-222-179-4-signed.zip.
However, after following to above steps, this time with the mentioned kernel, I get this error:
Bootloader
09.10
Err:A5,70,00,23
Battery OK
OK to Program
Connect USB
Data Cable
Now I'm panicking!! When I turn on the phone, it doesn't even get to the second Motorola logo screen where you can enter recovery mode. Was this an incorrect kernel? Any idea how to fix this? BTW, I'm now at work and have no USB cable.
Really worried I've bricked it by installing the incorrect kernel...
EDIT: I've also tried entering recovery from Vol- and Power, but to no avail
I'm hoping that maybe RSD Lite can fix this, but not sure what kernel to flash. I think originally I might have flashed this kernel kernel-froyo-222-179-4-signed after using SuperOneClick, but can't be sure.
Any help would be very much appreciated!

Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app

chiragvagh said:
Try by reinstalling stock firmware using oem tool/software.
Sent from my MK16i using xda app-developers app
Click to expand...
Click to collapse
Do you have a link for these please?

Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.

super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
Any idea how to fix it?

Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php

super noob bros said:
Defy+ users need not flash any kernel to get cm9 or cm10 working. Flashing the kernel will cause this error.
Click to expand...
Click to collapse
andr0idfreak said:
Flash your stock SBF back. You can find your stock ROM SBFs here:
http://sbf.droid-developers.org/umts_jordanplus/list.php
Click to expand...
Click to collapse
I see no stock Telstra Australia SBF there. I was also of the belief that I couldn't go back to stock with a Defy+.

I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.

andr0idfreak said:
I can see some SBF for AU. Try flashing that. I cannot guarantee anything though.
http://sbf.droid-developers.org/umt...AJRDNGIBRANZ_P020_A026_HWp3_Service1FF.sbf.gz
http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz
Try the 1321 version first as it is BL6 and easily rootable. If that too gives bootloader error then probably you are on BL7 and the second one is the only way out.
Click to expand...
Click to collapse
Tried downloading those a few times, but they seem to be corrupt.
Any other SBFs worth trying other than JORDN_U3_97.21.51.sbf which doesn't seem to work? Everything seems fine when using it in RSD, and it says it's passed, but then the phone simply won't power up. Any ideas?

If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.

andr0idfreak said:
If it doesn't power up after flashing SBF, try this:
1. Remove battery.
2. Keep the vol - pressed and then insert battery.
3. Then press the power button, keeping the vol- pressed.
4. You should see a triangle logo with exclamation mark, that's the stock recovery.
5. Press vol+ and Vol- key together to get various options.
6. Try wiping data and cache/factory reset.
Click to expand...
Click to collapse
No good - phone won't turn on at all, nothing but black screen

Ok. Try the same procedure but with vol+ instead till step 3, to get onto bootloader mode. Then try flashing the SBF again.

Finally back up and running
Flashed this ROM http://sbf.droid-developers.org/umt...3C_USAJRDNGIBRANZ_P021_A030_Service1FF.sbf.gz and it worked!
Thanks for all your help people

Stuck In Bootloop

changed the nav bar settings to show nav settings and then rebooted now stuck in a boot loop any help would be much app cheers :laugh:

strikerdj2011 said:
changed the nav bar settings to show nav settings and then rebooted now stuck in a boot loop any help would be much app cheers :laugh:
Click to expand...
Click to collapse
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop

S34Qu4K3 said:
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop
Click to expand...
Click to collapse
cheers

S34Qu4K3 said:
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.

poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Yestarday in Russian forum we get rid of bootloop
just download http://4pda.ru/pages/go/?u=http://yadi.sk/d/ZzsEQXm27IgEI this custom rom
connect your phone to your computer
launch the bat file Flash All.bat
and press and hold volume down and power buttons
in PC press 1 and enter and any key.
after flash custom rom you may flash official rom
Just try it
Sorry for my bad English........

Already solved here
http://forum.xda-developers.com/showthread.php?t=2401285
Sent from my HUAWEI P6-U06 using xda app-developers app

First flash done, how to flash official rom to the device?
SVikFromOrel said:
Yestarday in Russian forum we get rid of bootloop
just download this custom rom
connect your phone to your computer
launch the bat file Flash All.bat
and press and hold volume down and power buttons
in PC press 1 and enter and any key.
after flash custom rom you may flash official rom
Just try it
Sorry for my bad English........
Click to expand...
Click to collapse
First flash done, how to flash official rom to the device?

same problem
i dears
i have the same problem, device reboot every time i try to do something, i just tryed all metods including update.app, installation start but when come to "system" point...... reboot!
i dont know what doing again to solve that problem.

obbom said:
i dears
i have the same problem, device reboot every time i try to do something, i just tryed all metods including update.app, installation start but when come to "system" point...... reboot!
i dont know what doing again to solve that problem.
Click to expand...
Click to collapse
Since you can actually enter the recovery i suggest that you go in manually and try to reset/wipe and see if it starts.
Sent from my SM-G850F
---------- Post added at 23:50 ---------- Previous post was at 23:48 ----------
tardolus said:
First flash done, how to flash official rom to the device?
Click to expand...
Click to collapse
Get an update.app file from internet (Firmware of your choice), put it in sd card in folder named dload and enter the recovery.
Sent from my SM-G850F

tryed! but also in recovery after 10 seconds reboot aniway.
i can only put the device over the window!!...

obbom said:
tryed! but also in recovery after 10 seconds reboot aniway.
i can only put the device over the window!!...
Click to expand...
Click to collapse
How about bootloader mode, can you enter that?
Sent from my SM-G850F

no mate! i can't boot in bootloader mode, all driver are installed but pc dont see the phone because no bootloader mode.

obbom said:
no mate! i can't boot in bootloader mode, all driver are installed but pc dont see the phone because no bootloader mode.
Click to expand...
Click to collapse
Do you know the button combination to enter it? Or its not entering at all in bl mode?
Sent from my SM-G850F

yes mate i am a good modder, i know all buttons combination of all devices but in this way i think that the only thing is go to in a service center
but thanks aniway
cheers from italy

obbom said:
yes mate i am a good modder, i know all buttons combination of all devices but in this way i think that the only thing is go to in a service center
but thanks aniway
cheers from italy
Click to expand...
Click to collapse
Ok then last thing that i can suggest before you send it in for repair is that you download a diferent firmware (diferent update.app file) and try to flash that. If it fails again then send it.
Sent from my SM-G850F

[Q] downgrading dn3 to 4.3

i want to return stock rom. flashed with cwm, have full backup with it and kies. is it enough to restore it or i need to do more things ?

Up ?
Sent from my GT-N7100 using xda app-developers app

anglach said:
i want to return stock rom. flashed with cwm, have full backup with it and kies. is it enough to restore it or i need to do more things ?
Click to expand...
Click to collapse
So, you want to switch from DN3 (Custom ROM) to the Stock Firmware available for your device?

CMNII said:
So, you want to switch from DN3 (Custom ROM) to the Stock Firmware available for your device?
Click to expand...
Click to collapse
Exactly.

anglach said:
i want to return stock rom. flashed with cwm, have full backup with it and kies. is it enough to restore it or i need to do more things ?
Click to expand...
Click to collapse
anglach said:
Exactly.
Click to expand...
Click to collapse
1. What is your device model number?
2. I assume that you are familiar with flashing ROMs, right?

CMNII said:
1. What is your device model number?
2. I assume that you are familiar with flashing ROMs, right?
Click to expand...
Click to collapse
GT-N7100
Yes

anglach said:
GT-N7100
Yes
Click to expand...
Click to collapse
Here's the detailed steps to install the Stock Firmware for your device:
1. Head to the download page, this is the UNmodified firmware provided ‘as is’ from Samsung/carrier servers. [Don't forget to choose your location]
2. After download is complete, extract the downloaded file and you should get a MD5 file.
3. Enter the download mode form your device [normally by holding the volume up button + home button + power button]
4. Connect your device to your PC.
5. Start Odin.
6. Odin should recognize your device, and you can tell so by seeing that the first slot from the upper left is taken, if not then you need to install a driver for your device. [I personally just download Kies and it automatically download the proper driver for your device]
7. Click on PDA from Odin and browse to the extracted MD5 file.
8. Press Start.
9. Do not unplug your device until the process is fully completed.
10. The phone will reboot and you should see a Pass! on Odin, which means the process was successfully accomplished.
Don't proceed with any step of the past steps unless you fully understand every single one of them, if you have any difficulties understanding anything feel free to ask!

Thanks, will flash it when download finishes.

Downloaded and flashed, stuck on Samsung logo with a weird sound.

anglach said:
Downloaded and flashed, stuck on Samsung logo with a weird sound.
Click to expand...
Click to collapse
if you do all of instructions well, and didnt worked, then...
I THINK your problem will be solved by this way:
If you have installed samsung stuck recovery, or whatever ,now, just enter it by holding vol+ , home button and power button
then do all wipes. restart in download mod by holding vol-, power button and home button. after you've done it, then flash the stock official firmware in odin by given instructions
if I helped you press thanks button!:good:

Reza Kashkuli said:
if you do all of instructions well, and didnt worked, then...
I THINK your problem will be solved by this way:
If you have installed samsung stuck recovery, or whatever ,now, just enter it by holding vol+ , home button and power button
then do all wipes. restart in download mod by holding vol-, power button and home button. after you've done it, then flash the stock official firmware in odin by given instructions
if I helped you press thanks button!:good:
Click to expand...
Click to collapse
These instructions mentioned above should work but, I higly recommend wiping user data ( only) multiple times [through recovery] and rebooting, then wait patiently for Samsung's logo as it usually takes longer times at first boot, If this didn't work, then I'd say doing what fellow member Reza Kashkuli recommended.

CMNII said:
These instructions mentioned above should work but, I higly recommend wiping user data ( only) multiple times [through recovery] and rebooting, then wait Patiently for Samsung's logo as it usually takes longer times at first boot, If this didn't work then I'd say doing what fellow member Reza Kashkuli recommended.
Click to expand...
Click to collapse
Ok im agree with you mate

Wiped to factory settings, rooted and flashed cwm and it fixed itself :angel: thanks for help again.