[SOLVED!] Trinity Kernel hates my phone?????? - Samsung Galaxy Nexus

OK, so I have AOKP nightly build on my Galaxy Nexus GSM and I love it to pieces! But whenever I flash Trinity kernel, it boots and then a minute later, reboots again... I don't know why it does this since I did clear cache and dalvik cache whenever I flash something.
I did not try any other kernels yet.
Also I am starting to think that it's setCPU that is causing this problem... Or maybe because I try to overclock to 1.5 Ghz??????

If it boots and runs at 1200mhz but crashes any higher, the problem is likely to be your device, not the kernel. Not all devices are stable when over clocked, even a relatively small amount.
Sent from my Galaxy Nexus using xda app-developers app

killyouridols said:
If it boots and runs at 1200mhz but crashes any higher, the problem is likely to be your device, not the kernel. Not all devices are stable when over clocked, even a relatively small amount.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I understand what you're saying, but the thing is that when using stock kernel that comes with AOKP Nightly, I can overclock upto 1.8Ghz without any problem (I just oveclock to 1.4 though).
Whenever I flash to Trinity, it reboots when I try to overclock to 1.5Ghz. It came undervolted, so I did overvolt it about 100 and still no luck Do you think I need to factory reset, then flash?

kyokeun1234 said:
I understand what you're saying, but the thing is that when using stock kernel that comes with AOKP Nightly, I can overclock upto 1.8Ghz without any problem (I just oveclock to 1.4 though).
Whenever I flash to Trinity, it reboots when I try to overclock to 1.5Ghz. It came undervolted, so I did overvolt it about 100 and still no luck Do you think I need to factory reset, then flash?
Click to expand...
Click to collapse
disable smartreflex!

masterchif92 said:
disable smartreflex!
Click to expand...
Click to collapse
I barely know what smartreflex is... Mind if you can give me link to the instructions?

kyokeun1234 said:
I barely know what smartreflex is... Mind if you can give me link to the instructions?
Click to expand...
Click to collapse
franko kernel app and the trickest mod has this feature!

masterchif92 said:
franko kernel app and the trickest mod has this feature!
Click to expand...
Click to collapse
Hm.. is there any way I can do it manually?

kyokeun1234 said:
Hm.. is there any way I can do it manually?
Click to expand...
Click to collapse
yes but is more difficult then install trickest mod and turn it off!!

masterchif92 said:
yes but is more difficult then install trickest mod and turn it off!!
Click to expand...
Click to collapse
Thanks so much Could you possibly give me the link to the trickest mod?

kyokeun1234 said:
Thanks so much Could you possibly give me the link to the trickest mod?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1768315
here

masterchif92 said:
http://forum.xda-developers.com/showthread.php?t=1768315
here
Click to expand...
Click to collapse
Thanks so much! Trying it out right now!

Works now! Thanks so much everyone!

Are you running the 8/10 AOKP nightly? Because almost everyone is getting reboots on that nightly.
Sent from my Galaxy Nexus using xda premium

gfropr said:
Are you running the 8/10 AOKP nightly? Because almost everyone is getting reboots on that nightly.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yup 8/10 Nightly and I had NO problem before flashing Trinity. And yes, I am aware of the reboots people say, but for some reason, I had no problem whatsoever with this ROM. Dunno why actually... Hopefully they update with more features though

sollution!
Download the tkt app...
Disable smtflex mpu.. if it still rebooting, disable all 3 smartflex..
If you use the frequency under 1200mhz, you can use all smartflexs...
that's it!...

OtavioMalzone said:
Download the tkt app...
Disable smtflex mpu.. if it still rebooting, disable all 3 smartflex..
If you use the frequency under 1200mhz, you can use all smartflexs...
that's it!...
Click to expand...
Click to collapse
Yup, this has been already solved via Trickster Mod... Thanks though

Related

Locking thread till further notice [blahbl4hblah]

Kernels will be on kernel manager
Changelog 1.0:
- Enabled swap support
- Enabled compcache support
- Added smartass governor
- Added scary governor
- Added batterysave governor [basically conservative]
- Disabled sleeper
- Removed userspace governor
reserved for later
download now To test on sense 3.0 .
stian230 said:
download now To test on sense 3.0 .
Click to expand...
Click to collapse
Let me know how that works out
Remember what I said in OP. Might work or might not
Sent from my HTC Vision using Tapatalk
Flashing now. Will report back with results.
I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App
0.0 said:
I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
This kernel has NO issues.
Please read the OP. It states everything in there
blahbl4hblah said:
This kernel has NO issues.
Please read the OP. It states everything in there
Click to expand...
Click to collapse
ok thanks. i will test this out, and will see how it goes
Just flashed and my wifi broke. Is it be because of the radio am using? Using .30
Sent from my HTC Vision using XDA Premium App
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Lol alrighty. Aha just flashed again and it started working. Thanks for the kernel bro.
Sent from my HTC Vision using XDA Premium App
Ok, thinking about flashing this.
What is the min / max CPU freq of this kernel? I like to run my phone at 1ghz
Do I use SetCPU for this?
booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
stian230 said:
booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.
Click to expand...
Click to collapse
Really? Only camera broke?
Sent from my HTC Vision using XDA Premium App
blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios
GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
i tested it and same here, no new governors. I am on CM7, nightly #65 w/ the .30 radio. also wifi broke for me. under "wifi", it says "Error" and the checkbox wont check (wifi wont turn on). i flashed multiple times and wiped dalvik-cache, but nothing worked
EDIT: disregard above post about the wifi. downgraded radio as lainvalenajr has mentioned, and now it works fine. but the issue of still having no new governors is still present
GiGi. said:
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios
Click to expand...
Click to collapse
Had to Downgraded radio
Sent from my HTC Vision using XDA Premium App
GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
Ditto. I'll probably downgrade the radio as mentioned and try to reflash.

Lag when typing

Does anyone here get lag when you first begin to type something in the address bar or when using google search? Almost happens everytime but when I type my first few letters they dont quite show up right away and take a few secs to register. Im on CM10, I've tried using other keyboards but it happens with them all.
It can be ROM problem or microlags made by kernel.Which kernel you have?
sajty said:
It can be ROM problem or microlags made by kernel.Which kernel you have?
Click to expand...
Click to collapse
Im using faux123 hybrid kernel but this happens on any kernel I use. It also happens on stock CM10 kernel. Im not sure if I had it when I ran stock. Its been so long. It just gets really annoying and I wish i could find a solution for it.
Change your governor to interactive, then increase your input frequency using TricksterMOD from Play Store. This will boost your clockspeed when you touch the screen. I set mine at 1GHz
jaypr9 said:
Im on CM10, I've tried using other keyboards but it happens with them all.
Click to expand...
Click to collapse
This was a problem that I had CM with every keyboard I would use. It was one of the reasons I tried a different roms to see if it was CM that was causing it. Right now i am using RasBeanJelly with franco.Kernel. I have it set to 230min and 1.2ghz max on interactive. I have no keyboard lag at all. This rom has been one of the best roms I have ever used. CM was just a lag fest for me all the time not sure why since CM has been great in the past.
If you havent already, Try turning vibrate off on keyboard settings. Always causes a lag for me. First thing I turn off after a ROM flash.
Sent from my Galaxy Nexus using xda app-developers app
killyouridols said:
If you havent already, Try turning vibrate off on keyboard settings. Always causes a lag for me. First thing I turn off after a ROM flash.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I agree with this. I use Swype and it lags horribly with vibration turned on
Sent from my Galaxy Nexus using Tapatalk 2
killyouridols said:
If you havent already, Try turning vibrate off on keyboard settings. Always causes a lag for me. First thing I turn off after a ROM flash.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
This also helps with battery as well.

[Q] processor keeps going above max cpu setting?

Hello, i am new to the android world, and am loving it. Ive tried a couple of roms, and decided to stick with Liquid Smooth Jelly Bean Rom. My only problem is this:
i have set the max frequency for the processor to be 1512 mhz(or lower sometimes), but sometimes it keeps automatically setting itself to 1900mhz, which i do not want. Is there a way to set it so that it will never go above 1512?
btw i am on 3.0.45 leanKernel if that helps.
Thanks
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Deoxlar said:
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you! I'm trying it out right now =]
Sent from my SGH-I747 using xda app-developers app
Hello. So I tried this method and thought it worked.. but today while watching YouTube and texting it went up to 1900 again. I repeated the method a couple more times but it just maxes out all the time. Am I doing something wrong?
Thanks
Sent from my SGH-I747 using xda app-developers app
are there any solutions to this?
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
DarthDerron said:
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
Click to expand...
Click to collapse
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Sent from my SGH-I747 using xda app-developers app
ohaai said:
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Here's the link for the KT747 Kernel http://forum.xda-developers.com/showthread.php?t=1756776 . It works with all AOSP (CM10, AOKP etc.) aswell as most touchwiz roms. I've never used Liquidsmooth so Idk what it's about but this thread should contain information about which roms it is compatible with. If you have any questions I suggest starting a new thread about what its compatible with or asking directly in the thread. Good luck Always flash Rom before kernel.
Click to expand...
Click to collapse
ty will do

[Q] SetCPU - Voltages won't apply

Hello, I have just got SetCPU 3.0.9. I set my voltages then clicked "apply" it then said unfortunately, SetCPU has stopped. I have tried many times and it will not work. Please help!
mind if i ask why you're using setCPU when you have ktoonsez kernel/KTweaker app installed? i make my freq and voltage adjustments there
xBeerdroiDx said:
mind if i ask why you're using setCPU when you have ktoonsez kernel/KTweaker app installed? i make my freq and voltage adjustments there
Click to expand...
Click to collapse
I heard setCPU is the best.
i'm sorry i dont have any setCPU advise to offer other than possibly uninstalling/reinstalling it. i'll check into it though.
imo, the software included by the same dude that built the kernel is the logical choice for adjustments.
it has done everything i needed it to without any problems.
I have to agree with BeerDroid. If you're using KT's kernel, I would strongly recommend using Ktweaker to modify kernel settings (gov, scheduler, voltages, etc.)
CamFlawless said:
I have to agree with BeerDroid. If you're using KT's kernel, I would strongly recommend using Ktweaker to modify kernel settings (gov, scheduler, voltages, etc.)
Click to expand...
Click to collapse
Thank you. I will thank you when I am allowed to thank. I hit my limit.
TimeAndroid said:
Thank you. I will thank you when I am allowed to thank. I hit my limit.
Click to expand...
Click to collapse
hahahaha! :laugh: cheers, buddy
xBeerdroiDx said:
hahahaha! :laugh: cheers, buddy
Click to expand...
Click to collapse
One question, how do you save the settings on boot manually? I don't like how it sets it after a certain amount of time.
TimeAndroid said:
One question, how do you save the settings on boot manually? I don't like how it sets it after a certain amount of time.
Click to expand...
Click to collapse
You can have it to set on boot automatically, a timing of your choice, or not at all. It's in the main UI labeled "set options on boot."
TimeAndroid said:
I heard setCPU is the best.
Click to expand...
Click to collapse
After being a loyal setcpu user for multiple years, I found that system tuner pro is a much better app.
Sent from my SAMSUNG-SGH-I747 using xda premium
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
TimeAndroid said:
One question, how do you save the settings on boot manually? I don't like how it sets it after a certain amount of time.
Click to expand...
Click to collapse
Its best to apply after system boots up, than alter init.d scripts. This way, I'm case of any malfunction (as in too much undervolting), deleting the app using adb is sufficient.
Sent from my SAMSUNG-SGH-I747 using xda premium
I hate how you have to drag it.
It won't apply. I have a feeling that KT747 is causing the issue. Every system tweaker I tried would not apply.
Do you guys suggest re-installing KT747?
TimeAndroid said:
Do you guys suggest re-installing KT747?
Click to expand...
Click to collapse
It may help. Also, be sure to make sure you don't have another kernel tweaking app trying to make changes as well. If you have multiple apps trying to run settings you could run into issues. What exactly do you mean when you say that they wont apply?
CamFlawless said:
It may help. Also, be sure to make sure you don't have another kernel tweaking app trying to make changes as well. If you have multiple apps trying to run settings you could run into issues. What exactly do you mean when you say that they wont apply?
Click to expand...
Click to collapse
In SetCPU (don't have anymore) when I pressed apply on voltages, it stopped working. With KTweaker, I press apply then go back. If I go back in, the voltages are back to defaults.
Found several issues. Apparently, my phone was not rooted properly. When installing, it asked to root, I said yes. Now I also noticed the new splash screen. Hopefully it works.
TimeAndroid said:
Found several issues. Apparently, my phone was not rooted properly. When installing, it asked to root, I said yes. Now I also noticed the new splash screen. Hopefully it works.
Click to expand...
Click to collapse
well i still have the same problem and mine is rooted very well, i have your same kernel but not the same Rom i think, i am on Battle Frontier 4.1 aka s3 Unr3armed new version.

Always running at 1.6ghz? Phone charging REALLY slow

Having an issue with charging for the past few days. Phone dies quickly. Phone charges really slow and in CPU Spy, it's either at 1600 mhz or deep sleep. Nothing in between. I checked the clock speed and it's 200 mhz - 1600 mhz. I don't know what I'm doing wrong.
You on aosp?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Zachinater said:
You on aosp?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes. Beanstalk.
That ROM has quite the horrible battery
I've found that the best battery is in carbon ROM
Aosp just doesn't get as good battery as touchwiz
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
If you can get an app like betterbatterystats to show what is actually draining your battery then that should fix your problem. If you cant find out whats keeping your CPU at max then follow this as much as you can
ruinkhan said:
If you can get an app like betterbatterystats to show what is actually draining your battery then that should fix your problem. If you cant find out whats keeping your CPU at max then follow this as much as you can
Click to expand...
Click to collapse
What u mean
I'm getting battery worse on carbon then on Jedi
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
ruinkhan said:
If you can get an app like betterbatterystats to show what is actually draining your battery then that should fix your problem. If you cant find out whats keeping your CPU at max then follow this as much as you can
Click to expand...
Click to collapse
I tried BBS but didn't help. I was thinking of starting fresh but trying to find things before going to that step. Thanks.
Zachinater said:
What u mean
I'm getting battery worse on carbon then on Jedi
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Then you were doing something wrong. I'm getting wayy better battery on BeanStalk than on most TW ROMs
Clean install
Phone plugged in, stuck at 47% for the past half hour. Backing up and formatting phone. Just hope this is the solution
twanskys204 said:
Clean install
Click to expand...
Click to collapse
+1:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Clean install. Restoring apps from Google Play. Stuck at 49%. I may be paranoid but I doubt it takes this long to charge, even when downloading apps.
Not even 1% in a couple of minutes.
Maybe ur brick or wire is screwd up
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Boot to recovery...
Wipe the caches...
Reboot...
Let the phone sit untouched for 10 minutes...
Then use cpu spy from the market to test..
You could also try a kernel change to avoid the max cpu issues..
I'm running carbon rom with devil kernel and have no issues...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Zachinater said:
Maybe ur brick or wire is screwd up
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I doubt it's a brick but I think my USB port is busted. I can't even connect to a computer. It charges though (tries to) due to charging light.
gregsarg said:
Boot to recovery...
Wipe the caches...
Reboot...
Let the phone sit untouched for 10 minutes...
Then use cpu spy from the market to test..
You could also try a kernel change to avoid the max cpu issues..
I'm running carbon rom with devil kernel and have no issues...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Did both of those. Let you know in a bit.
Typically, when the cpu maxes out, phone won't charge.
Consider checking your governor, tweaks, or rogue apps.
10 mins on and still 98%. Everything seems to going so far. Now just my USB problem
qkster said:
Typically, when the cpu maxes out, phone won't charge.
Consider checking your governor, tweaks, or rogue apps.
Click to expand...
Click to collapse
I understand.
According to CPU Spy, 1600 is 59%! 800 is 1% and deep sleep is 35%. This is after a clean install / caches cleared / new kernel.
I don't know what's wrong. This is a first for me.
GetPatriotized said:
I understand.
According to CPU Spy, 1600 is 59%! 800 is 1% and deep sleep is 35%. This is after a clean install / caches cleared / new kernel.
I don't know what's wrong. This is a first for me.
Click to expand...
Click to collapse
Have you installed personal apps beyond the gapps package ??
I've been plagued with this same issue on AOSP roms for weeks...
And finally settled with carbon rom and devil kernel...
Governor is pegasusq....and scheduling is cfs...
The initial boot will take mine about 10 minutes to settle in...and do "not" use any system tuning apps to control the CPU...as they will conflict and confuse the on board AOSP control..
If you have done this...then factory reset the device and try the test again with no optional apps that control the CPU...
This is a frustrating effect that only targets a few devices...and ours are affected...
I got through it...but try the above settings....and be patient on the first setup....and if the system is free of control files it will work...g
Edit:
I'll stick around for a bit and do my best to help the issue...
I finally got it on carbon rom nightly builds...as all CM nightly roms Will bork my CPU....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app

Categories

Resources