Locking thread till further notice [blahbl4hblah] - G2 and Desire Z Android Development

Kernels will be on kernel manager

Changelog 1.0:
- Enabled swap support
- Enabled compcache support
- Added smartass governor
- Added scary governor
- Added batterysave governor [basically conservative]
- Disabled sleeper
- Removed userspace governor

reserved for later

download now To test on sense 3.0 .

stian230 said:
download now To test on sense 3.0 .
Click to expand...
Click to collapse
Let me know how that works out
Remember what I said in OP. Might work or might not
Sent from my HTC Vision using Tapatalk

Flashing now. Will report back with results.

I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App

0.0 said:
I assume this works with any nightly/stable cm7? Like it doesn't break the camera or wifi?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
This kernel has NO issues.
Please read the OP. It states everything in there

blahbl4hblah said:
This kernel has NO issues.
Please read the OP. It states everything in there
Click to expand...
Click to collapse
ok thanks. i will test this out, and will see how it goes

Just flashed and my wifi broke. Is it be because of the radio am using? Using .30
Sent from my HTC Vision using XDA Premium App

It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat

blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Lol alrighty. Aha just flashed again and it started working. Thanks for the kernel bro.
Sent from my HTC Vision using XDA Premium App

Ok, thinking about flashing this.
What is the min / max CPU freq of this kernel? I like to run my phone at 1ghz
Do I use SetCPU for this?

booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.

I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S

stian230 said:
booted fine on sense 3.0 everything is going very fast, BUT lost the camera and some 3D graphics on the weather. This has happened every time I try a oc kernel on sense 3.0. regardless this is probably a good kernel .when I get tired of sense in a few days and flasher cm7 again I will test your kernel. Thx.
Click to expand...
Click to collapse
Really? Only camera broke?
Sent from my HTC Vision using XDA Premium App

blahbl4hblah said:
It's pretty funny. Wifi shouldn't be broken period.
If there's a problem post a logcat
Click to expand...
Click to collapse
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios

GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
i tested it and same here, no new governors. I am on CM7, nightly #65 w/ the .30 radio. also wifi broke for me. under "wifi", it says "Error" and the checkbox wont check (wifi wont turn on). i flashed multiple times and wiped dalvik-cache, but nothing worked
EDIT: disregard above post about the wifi. downgraded radio as lainvalenajr has mentioned, and now it works fine. but the issue of still having no new governors is still present

GiGi. said:
Users are mentioning same problems with eugene's kernel, so something is going wrong in combination with certain roms/radios
Click to expand...
Click to collapse
Had to Downgraded radio
Sent from my HTC Vision using XDA Premium App

GiGi. said:
I just flashed your kernel, well, kind off. In cwm everything looks fine but after booting it looks like the kernel was not changed. No new governors or other changes :S
Click to expand...
Click to collapse
Ditto. I'll probably downgrade the radio as mentioned and try to reflash.

Related

Overclocking problems

I overclocked my phone to 1.4GHz but it freezes soon after. 1GHz works fine. I followed the youtube vid from blackprince. Any help would be nice thanks
Sent from my T-Mobile G2 using XDA App
Bdix said:
I overclocked my phone to 1.4GHz but it freezes soon after. 1GHz works fine. I followed the youtube vid from blackprince. Any help would be nice thanks
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
More info, are you rooted? Im assuming yes from the blackprince video reference. What rom are you on, what kernel, setcpu, any profiles etc...????
Bdix said:
I overclocked my phone to 1.4GHz but it freezes soon after. 1GHz works fine. I followed the youtube vid from blackprince. Any help would be nice thanks
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
That's just your phones' way of saying "Stop making me work harder than I need to!!!!"
Bdix said:
I overclocked my phone to 1.4GHz but it freezes soon after. 1GHz works fine. I followed the youtube vid from blackprince. Any help would be nice thanks
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
R u using gscript overclock??
Sent from my HTC Vision using XDA App
Kernal is
2.6.32.17-g9ab3677
Yes I im useing gscript. I have the
OC. File and Oshitttt
Oc. Works fine, but have to overclock it every time I reboot. Every thing is stock on my phone beside the peraroot (S-off) and the kernal.
Sent from my T-Mobile G2 using XDA App
I do have setcpu, astro, and all apps needed to root and over clock. I am still on stock rom.
Sent from my T-Mobile G2 using XDA App
Then I guess you're just unlucky :/
You'll have to just settle for 1GHz I guess.
Sent from my T-Mobile G2 running Cyanogenmod.
Wow! That sux...........
Sent from my T-Mobile G2 using XDA App
Bdix said:
Kernal is
2.6.32.17-g9ab3677
Yes I im useing gscript. I have the
OC. File and Oshitttt
Oc. Works fine, but have to overclock it every time I reboot. Every thing is stock on my phone beside the peraroot (S-off) and the kernal.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I dont think I quite understand your situation, are you rooted or not, according to this post you say you are stock besides "peraroot (I think you meant permroot)and the kernel" , so meaning you are rooted (s-off)??. Anyways if you are rooted why are you using gscript to OC with? And if your on a custom kernel why not use setcpu or something similar.
If your not rooted (s-on) then I think I remember when using the gsript files that 1.4 and over was unstable, if you want something a little higher than 1ghz use something like word pad to change the value in the script you are pushing for the oc to go to 1.1ghz or 1.2ghz etc..
Bdix said:
I overclocked my phone to 1.4GHz but it freezes soon after. 1GHz works fine. I followed the youtube vid from blackprince. Any help would be nice thanks
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
From my experience, not all processors are created equal... Some just handle the higher frequencies better than others do.
I have loaded everything why not working download kernel should put first in phone should I do in computer
Sent from my T-Mobile G2 using XDA App
Yes I'm permarooted. S-off. I'm useing gscript because that's what was done in the video. I have setcpu and use it but with out a overclock program I can only raise it to 806MGz and with oc. I can raise it to 1017MGz. If that's as high as I can go then I guess I just have to deal with that.
Sent from my T-Mobile G2 using XDA App
Bdix said:
Yes I'm permarooted. S-off. I'm useing gscript because that's what was done in the video. I have setcpu and use it but with out a overclock program I can only raise it to 806MGz and with oc. I can raise it to 1017MGz. If that's as high as I can go then I guess I just have to deal with that.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
As someone said earlier, I think you are using the old, unstable method. I highly recommend u updating to a ROM with OC embedded into the kernel.
It is also true that "not all processors are created equally" but this is the only case I have read with it freezing at 1.4.
Bdix said:
Kernal is
2.6.32.17-g9ab3677
Yes I im useing gscript. I have the
OC. File and Oshitttt
Oc. Works fine, but have to overclock it every time I reboot. Every thing is stock on my phone beside the peraroot (S-off) and the kernal.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
U need to find a rom that suits u and use pershoots kernel download any cpu tuner for overclock do not use gscript it really freezes ur phone
Sent from my HTC Vision using XDA App
I have the same problem ,i am running virtouos ROM with evil 12/10 and if i over-clock anything over 1094mhz my phone freezes the the only way that i can manage more than that is if i set it to performance scaling with no profile and there is no point on doing that because it eats the battery .its only good for benchmarking ,i think your problem is same is me, you have been unlucky with your CPU .i am just hoping its going to be different when gingerbread come out.
bahmanxda said:
I have the same problem ,i am running virtouos ROM with evil 12/10 and if i over-clock anything over 1094mhz my phone freezes the the only way that i can manage more than that is if i set it to performance scaling with no profile and there is no point on doing that because it eats the battery .its only good for benchmarking ,i think your problem is same is me, you have been unlucky with your CPU .i am just hoping its going to be different when gingerbread come out.
Click to expand...
Click to collapse
Have you given CM6.1 a go just to compare if you can clock higher using a different ROM?
If you are indeed using the gscript method then this has been explained many times! there's a whole giant humungo thread about that hack when it initially came out.
the reason your phone's freezing is because you're asking it to clock faster, but you arent giving it more juice to offset the additional work it's conducting..hence the freeze. that old hack (while it was awesome at the time) is very outdated and has been surpassed by actual performance kernels.
It's all in the thread. you wouldnt put low octane in a sports car would you? same principle lol
wileykat said:
Have you given CM6.1 a go just to compare if you can clock higher using a different ROM?
Click to expand...
Click to collapse
No i havnt ,i got desire z i thought CM6.1 is for G2 only ,i will look into it and see if its compatible with Desire z though i really like sense ,thanks
bahmanxda said:
No i havnt ,i got desire z i thought CM6.1 is for G2 only ,i will look into it and see if its compatible with Desire z though i really like sense ,thanks
Click to expand...
Click to collapse
I think they have already solved the key mapping for the CM rom, look here:
http://forum.xda-developers.com/showthread.php?t=847824
wileykat said:
Have you given CM6.1 a go just to compare if you can clock higher using a different ROM?
Click to expand...
Click to collapse
I gave CM6.1 a go and i am stable at 1.5ghz cheers for that , i really like sense though, i will play with CM6.1 and see what happens maybe i will continue using it.

[KERNEL][10Dec2011]OdiemanSAM HTC G2 ICS/CM7 Kernel

Ok so this is my thread for my kernel... just getting it started and will finish it tonight because I am without a computer right now but figured I could startf it with my phone. This has touchscreen support for Desire Z in ICS and much more
New kernel - Full Keyboard and softkey support and base speed of 307mhz to prevent crashes - removed file is broken
and for those that just want full hard and soft key support - http://www.mediafire.com/?fbngo66nizrb8hw
is this the one with the brilliant ANTUTU results?
xT4Z1N4TRx said:
is this the one with the brilliant ANTUTU results?
Click to expand...
Click to collapse
that is correct
Tried this with xT's port, wifi was continuously looping on obtaining ip address, and rotation didn't work, but I'm assuming it was rom related
Sent from my HTC Vision using xda premium
ptesmoke said:
Tried this with xT's port, wifi was continuously looping on obtaining ip address, and rotation didn't work, but I'm assuming it was rom related
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
What version did you try,saw
Changelog:
Beta3r3.1: Fixed rotation
fixed wifi (i think)
fixed gps (i think)
http://dev-host.org/q5g4uyzutw7p/Des...T_Z_B3R3.1.zip
Any help?
My bad! B3R3. Will try the 3.1 tomorrow
Sent from my HTC Vision using xda premium
bombadier said:
What version did you try,saw
Changelog:
Beta3r3.1: Fixed rotation
fixed wifi (i think)
fixed gps (i think)
http://dev-host.org/q5g4uyzutw7p/Des...T_Z_B3R3.1.zip
Any help?
Click to expand...
Click to collapse
I though xT's Beta3r3.1 includes OdiemanSAM's kernel and therefore no need for the additional step of flashing this?
updated OP with new kernel
WOOT ill test...
hey can i get a link to your kernel source?
Sent from my Incredible 2 using XDA App
times_infinity said:
hey can i get a link to your kernel source?
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
i just use the htc-kernel-msm7x30 cyanogenmod base with mods for ts and stuff
havent learned enough for repos yet... gimme some more time... I can zip it up but no where to host it... mediafire only lets me put files <250mb
Has this thread been updated with the kernel that fixes keyboard?
Sent from my HTC Vision using XDA App
xT4Z1N4TRx said:
Has this thread been updated with the kernel that fixes keyboard?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
just did it...
changed the character maping so that z is @ and x is ?... update in the OP
OdiemanSAM said:
changed the character maping so that z is @ and x is ?... update in the OP
Click to expand...
Click to collapse
I assume this wouldn't fix the alt + numbers?
jumperfreak said:
I assume this wouldn't fix the alt + numbers?
Click to expand...
Click to collapse
you can get numbers... think i am miss understanding
OdiemanSAM said:
you can get numbers... think i am miss understanding
Click to expand...
Click to collapse
When I flashed the ICS this morning without the keyboard fix I couldn't use
FN + Q for a 1 or FN + W for a 2, and so on...
So is this possible with the fix?
jumperfreak said:
When I flashed the ICS this morning without the keyboard fix I couldn't use
FN + Q for a 1 or FN + W for a 2, and so on...
So is this possible with the fix?
Click to expand...
Click to collapse
yes it is now
So I just tried to run WiFi Calling (Desire S port b3r3.1), and it kept force closing. Obviously not a big deal since WiFi isn't currently working, but does your kernel have the kineto module in it so that once we get WiFi we can do WiFi calling? Also, I tried to run LED Me Know, and it also FC'd. I don't know if that's a kernel problem, a ROM problem, or if it's just not compatible with ICS yet, but I thought I'd let you know in case it was a kernel problem.
Thanks again for all the hard work!
aacrabtree said:
So I just tried to run WiFi Calling (Desire S port b3r3.1), and it kept force closing. Obviously not a big deal since WiFi isn't currently working, but does your kernel have the kineto module in it so that once we get WiFi we can do WiFi calling? Also, I tried to run LED Me Know, and it also FC'd. I don't know if that's a kernel problem, a ROM problem, or if it's just not compatible with ICS yet, but I thought I'd let you know in case it was a kernel problem.
Thanks again for all the hard work!
Click to expand...
Click to collapse
yes and i have wifi calling installed and NOT force closing but it wont connect... my kernel does wifi calling just fine in CM7 but rilswitch or ganril or something is wonky

[SOLVED!] Trinity Kernel hates my phone??????

OK, so I have AOKP nightly build on my Galaxy Nexus GSM and I love it to pieces! But whenever I flash Trinity kernel, it boots and then a minute later, reboots again... I don't know why it does this since I did clear cache and dalvik cache whenever I flash something.
I did not try any other kernels yet.
Also I am starting to think that it's setCPU that is causing this problem... Or maybe because I try to overclock to 1.5 Ghz??????
If it boots and runs at 1200mhz but crashes any higher, the problem is likely to be your device, not the kernel. Not all devices are stable when over clocked, even a relatively small amount.
Sent from my Galaxy Nexus using xda app-developers app
killyouridols said:
If it boots and runs at 1200mhz but crashes any higher, the problem is likely to be your device, not the kernel. Not all devices are stable when over clocked, even a relatively small amount.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I understand what you're saying, but the thing is that when using stock kernel that comes with AOKP Nightly, I can overclock upto 1.8Ghz without any problem (I just oveclock to 1.4 though).
Whenever I flash to Trinity, it reboots when I try to overclock to 1.5Ghz. It came undervolted, so I did overvolt it about 100 and still no luck Do you think I need to factory reset, then flash?
kyokeun1234 said:
I understand what you're saying, but the thing is that when using stock kernel that comes with AOKP Nightly, I can overclock upto 1.8Ghz without any problem (I just oveclock to 1.4 though).
Whenever I flash to Trinity, it reboots when I try to overclock to 1.5Ghz. It came undervolted, so I did overvolt it about 100 and still no luck Do you think I need to factory reset, then flash?
Click to expand...
Click to collapse
disable smartreflex!
masterchif92 said:
disable smartreflex!
Click to expand...
Click to collapse
I barely know what smartreflex is... Mind if you can give me link to the instructions?
kyokeun1234 said:
I barely know what smartreflex is... Mind if you can give me link to the instructions?
Click to expand...
Click to collapse
franko kernel app and the trickest mod has this feature!
masterchif92 said:
franko kernel app and the trickest mod has this feature!
Click to expand...
Click to collapse
Hm.. is there any way I can do it manually?
kyokeun1234 said:
Hm.. is there any way I can do it manually?
Click to expand...
Click to collapse
yes but is more difficult then install trickest mod and turn it off!!
masterchif92 said:
yes but is more difficult then install trickest mod and turn it off!!
Click to expand...
Click to collapse
Thanks so much Could you possibly give me the link to the trickest mod?
kyokeun1234 said:
Thanks so much Could you possibly give me the link to the trickest mod?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1768315
here
masterchif92 said:
http://forum.xda-developers.com/showthread.php?t=1768315
here
Click to expand...
Click to collapse
Thanks so much! Trying it out right now!
Works now! Thanks so much everyone!
Are you running the 8/10 AOKP nightly? Because almost everyone is getting reboots on that nightly.
Sent from my Galaxy Nexus using xda premium
gfropr said:
Are you running the 8/10 AOKP nightly? Because almost everyone is getting reboots on that nightly.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yup 8/10 Nightly and I had NO problem before flashing Trinity. And yes, I am aware of the reboots people say, but for some reason, I had no problem whatsoever with this ROM. Dunno why actually... Hopefully they update with more features though
sollution!
Download the tkt app...
Disable smtflex mpu.. if it still rebooting, disable all 3 smartflex..
If you use the frequency under 1200mhz, you can use all smartflexs...
that's it!...
OtavioMalzone said:
Download the tkt app...
Disable smtflex mpu.. if it still rebooting, disable all 3 smartflex..
If you use the frequency under 1200mhz, you can use all smartflexs...
that's it!...
Click to expand...
Click to collapse
Yup, this has been already solved via Trickster Mod... Thanks though

[Q] processor keeps going above max cpu setting?

Hello, i am new to the android world, and am loving it. Ive tried a couple of roms, and decided to stick with Liquid Smooth Jelly Bean Rom. My only problem is this:
i have set the max frequency for the processor to be 1512 mhz(or lower sometimes), but sometimes it keeps automatically setting itself to 1900mhz, which i do not want. Is there a way to set it so that it will never go above 1512?
btw i am on 3.0.45 leanKernel if that helps.
Thanks
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Deoxlar said:
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you! I'm trying it out right now =]
Sent from my SGH-I747 using xda app-developers app
Hello. So I tried this method and thought it worked.. but today while watching YouTube and texting it went up to 1900 again. I repeated the method a couple more times but it just maxes out all the time. Am I doing something wrong?
Thanks
Sent from my SGH-I747 using xda app-developers app
are there any solutions to this?
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
DarthDerron said:
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
Click to expand...
Click to collapse
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Sent from my SGH-I747 using xda app-developers app
ohaai said:
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Here's the link for the KT747 Kernel http://forum.xda-developers.com/showthread.php?t=1756776 . It works with all AOSP (CM10, AOKP etc.) aswell as most touchwiz roms. I've never used Liquidsmooth so Idk what it's about but this thread should contain information about which roms it is compatible with. If you have any questions I suggest starting a new thread about what its compatible with or asking directly in the thread. Good luck Always flash Rom before kernel.
Click to expand...
Click to collapse
ty will do

Network error and can't connect to internet

I need some help. So my issue can be a couple of things. So I flashed a beanstalk Rom last night and as of this morning and early afternoon I had internet, could connect to Fb and etc. But I also had my line switched last night from being under my ex's line to my own and for a moment then I couldn't connect until I selected some plan. So back to today everything has been fine until I noticed flashing the latest Nos script. It was some time after then where I couldn't log on. Not immediately but I knew since then I couldn't. So my question is would it be because of that script or something on the t-mobile side? I haven't called because my phone is rooted and not sure how to handle that. I also don't know if apn settings may be messed up? Please help and thanks
Sent from my SGH-T849 using xda app-developers app
Also I can't connect through wIfi also. I go into settings and turn it on but it can't be selected it doesn't move.
Sent from my SGH-T849 using xda app-developers app
Try a different radio
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
Sounds like there's a problem with the script. You could make a nandroid and do a clean flash to see if everything works.
OK so I think it was a script or possibly the kernel. I went to a nandroid I made last night and went to that. Had the same radio and but no script and not the newer kernel and it works fine.
Sent from my SAMSUNG-SGH-T989 using xda premium
suaverc118 said:
I need some help. So my issue can be a couple of things. So I flashed a beanstalk Rom last night and as of this morning and early afternoon I had internet, could connect to Fb and etc. But I also had my line switched last night from being under my ex's line to my own and for a moment then I couldn't connect until I selected some plan. So back to today everything has been fine until I noticed flashing the latest Nos script. It was some time after then where I couldn't log on. Not immediately but I knew since then I couldn't. So my question is would it be because of that script or something on the t-mobile side? I haven't called because my phone is rooted and not sure how to handle that. I also don't know if apn settings may be messed up? Please help and thanks
Sent from my SGH-T849 using xda app-developers app
Click to expand...
Click to collapse
It's most likely the script I had conflicting wifi and data tweaks once same thing happened to me couldn't connect to anything until I figured it out. It was the sysctl. conf file conflicting with the build prop and int.d tweaks I had.
Sent from my SGH-T989 using Tapatalk 2
richardlibeau said:
It's most likely the script I had conflicting wifi and data tweaks once same thing happened to me couldn't connect to anything until I figured it out. It was the sysctl. conf file conflicting with the build prop and int.d tweaks I had.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man, you're always helpful in these forums. Did you just remove the script after that or just reflashed the ROM? And what ROM are you currently running? Thanks bro
Sent from my SAMSUNG-SGH-T989 using xda premium
suaverc118 said:
Thanks man, you're always helpful in these forums. Did you just remove the script after that or just reflashed the ROM? And what ROM are you currently running? Thanks bro
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Yeah I removed the script including the sysctl. conf file. Then put the original one back and it was good. I have been running Liquidsmooth RC9 since November as my main rom. Have V6, GPU oc'd, reversed mounting script for external/internal sd, and sound mods on it with kko kernel. I flash all the roms though just to see how they run. I really like the linaro builds lately that are coming out. They seem to be getting snappier and overclocking to 2ghz with the uber kernel is sweet just to test with but not an all day thing or your phone will blow up. Been staying on 4.1.2 for stability reasons mainly. Camera and video doesn't act crazy, notification lights work, and the coding of the kernels isn't out of whack like some of the 4.2.2 roms. Eventually I will jump fully to a 4.2.2 rom but for now I am good with 4.1.2 because it's reliable with no issues.
Sent from my SGH-T989 using Tapatalk 2
richardlibeau said:
Yeah I removed the script including the sysctl. conf file. Then put the original one back and it was good. I have been running Liquidsmooth RC9 since November as my main rom. Have V6, GPU oc'd, reversed mounting script for external/internal sd, and sound mods on it with kko kernel. I flash all the roms though just to see how they run. I really like the linaro builds lately that are coming out. They seem to be getting snappier and overclocking to 2ghz with the uber kernel is sweet just to test with but not an all day thing or your phone will blow up. Been staying on 4.1.2 for stability reasons mainly. Camera and video doesn't act crazy, notification lights work, and the coding of the kernels isn't out of whack like some of the 4.2.2 roms. Eventually I will jump fully to a 4.2.2 rom but for now I am good with 4.1.2 because it's reliable with no issues.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Kener has a beanstalk ROM with updated cm10.1 merges and using his latest Uber nightly along with cross bread and its flying. Not even over clocked right now. Running for 4 hours and so far no issues. I'm praying Lol!
Sent from my SAMSUNG-SGH-T989 using xda premium
Yeah I tried it and it's a fast rom . I used his Uber 2ghz kernel with it. That is in his WickedAwesome folder.
Sent from my SGH-T989 using Tapatalk 2

Categories

Resources