Battery Cover not flush - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hi all, just picked up an S3 to try out and noticed that the lower edge of the battery cover is not flush with the body of the phone. If you run your finger across it, there is a noticable lip/ledge. Anyone else have or notice this? Not a real big deal, just curious. Along with the rattling volume button, I'm not completely impressed by the build quality so far.

The top of my battery door where you peel it off sticks out a tiny bit. Not much at all. The rest is pretty flush. No button issues either here.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Related

Build quality

Over all I'm happy with the build quality of my GSM GNex, but it has one minor flaw.
The plastic edge around the screen. Top, Bottom and Right side are perfect and rounded smooth (just like my SGS2), but the left edge i kinda rough and not rounded and smooth like the others. It has a rough feel with a slight sharp feel if you slide your finger over it and makes a "small" rough sound.
Do any of you recognize this? Or is your GNex perfectly smooth like the SGS2?
mine feels uniformly smooth on all sides. one thing i don't like though is dust being trapped in between the said edges and screen. other than that it's flawless
I'm very happy with the build quality on my verizon version.
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
My problem .... frigging power button on side of the phone!!! I have to be so careful not to do a screen shoot its just unbelievable ...only other way of switching screen on or off is to hold the phone form top instead resting it on your palm
Sent from my Galaxy Nexus using xda premium
My Gnex is perfectly solid despite having dropped it on tile twice. Yeah, I'm a klutz. There aren't any creaks in it, no popped-up glass, buttons are smooth, no loose or rough joins anywhere.
As I mentioned in another thread, the "flimsy" back cover of the Gnex has an advantage in that it doesn't fly off and let the battery go as well when the phone is dropped. Every smartphone I've ever owned would, when dropped, fly in three different directions when it hit the ground- phone in one direction, back cover in another, battery in another. The Gnex stays in one piece.
Somehow I've only managed to break two phones in my life despite my constant accidental drop testing. Neither of the broken phones was a Samsung (one was a SE X10 dropped into a sinkful of water, the other a BlackBerry dropped on pavement). Admittedly the Samsungs feel a little flimsy next to a lot of high-end phones, but the fact that they are lightweight and plastic actually makes them more durable, IME.
Mine is fine, outside of one extremely annoying issue. The vibrate motor on my unlocked GSM Nexus makes the phone rattle on the bottom right side (obviously where the motor is housed) if I'm not holding the phone on that side. I am normally a vibrate all the time guy...now I only have it vibrate for phone calls because it annoys me so much. I love how powerful and silent the motor is when I'm holding it...(at least compared to my Droid Incredible 2). My Verizon Nexus didn't do this at all before I returned it. Sad.
Lodion said:
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
Click to expand...
Click to collapse
Argh, hadn't noticed that before. cannot unhear the clicking noise
put a layer or two of masking tape on the back of the cover until the space has been taken up. problem solved.
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
This shoud fix the battery cover problem http://www.ebay.com.au/itm/Metal-ba...858658?pt=PDA_Accessories&hash=item2a1808d5e2
@rbiter said:
My software buttons are uneven. Vertically.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Mine too. I've exchanged 3 times and they all have the same problem. I think it is because of the curved glass.
Sent from my Galaxy Nexus using Tapatalk
My software buttons are uneven. Vertically.
Click to expand...
Click to collapse
I am curious. What are you talking about here? do you mean the virtual buttons on the bottom are not aligned? Could you do a screenshot to show what you mean if that is the case? I have never heard of that one before.
@rbiter said:
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Lol. I had to quote myself. Guess the joke was missed.
Sent from my Nexus in Texas.
Thanks for all the replies. I ended of returning my GNex as a DOA, so now I'm waiting for a new one.

[Q] Clicking rear housing on Nexus LTE

I have searched around but have not found a fix. My nexus LTE clicks (a physical click) when I push the bottom left corner where the body meets the screen glass together and a click is able to be felt. I tried to remedy it by tightening the screws on the rear housing but it made hardly any difference. does anyone else notice this on their phones? any suggestions on fixing it? it drives me nuts!
I noticed mine doing it as well. Do you have a extended battery? I have the one from verizon but I doubt it's the cause.
Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
Mine makes clicking and creaking noises, but the cause of mine are the back cover.
I used double sided tape to stick it in place and that stopped the clicking, as I can't be bothered to buy another back cover.
Take off the back cover and see if it still does it?
its not the battery cover. its actually the silver body where it meets the main lcd/glass body. i do have an extended battery but i dont thinks that's the issue. it'd be a little difficult to fit tape in the gap.
Yep i know exactly whar ur talkin about drives me freakin nuts... no extended battery here.
Sent from my Galaxy Nexus using xda premium

Galaxy Note 2 build quality...???

I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
buttons do feel a bit loose, but no biggie for me especially those on volume. battery cover squeaks a bit when pressed too hard, but it's plastic, and plastic with right amount of pressure squeaks.
I have minimal movement in the buttons. A fraction of a millimeter, if any. I have absolutely no squeek with normal use but can fine an area that squeeks if i try hard. Make sure your cover is properly fitted.
Mine doesn't squeak in normal use either but if I push it, it will!
Stupid thread
Sent from my GT-N7100 using xda premium
ChimpNippl3s said:
Stupid thread
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ha ha ha
No this isnt stupid thread.
I have some problems. F... Phone for 600Eur
I hate plastic, so I hate Samsung for that. But sorry the buttons don't feel loose, and what do you mean by back plate squeaks near speaker grill, when do you try to open it or just normally press it when it's firmly sitting there? If it's the latter then mine doesn't squeak too.
But other than these, I don't like build quality, how can I when it's all plastic!
My phone makes an awful noise when I drop it. Solution - don't drop it.
My phone makes a noise when I press the back cover. Solution - don't press the back cover.
Is pressing the back cover of the phone something that you need to do in normal use?
Anyhow I saw a comment a while ago that taking the cover off or putting it on in a certain way can damage the tabs along the edge and cause it to squeak. Check the tabs and see if they are all there or are damaged
Sent from my Samsung Note II.
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
I agree! Infact on S2 the bottom bulk ensure that I hold the phone the right way. Holding Note 2 is a dicey affair as its symmetrical design makes it difficult to know the orientation. I HATE glossy plastic button against the Matte finish, practically indestructible thin plastic on S2. Although I don't like the exposed bottom bulk which is not covered by the battery cover! I personally prefer the plastic cover on Galaxy R which completely cover the back including the area around the MicroUSB port which can easily get scratched otherwise.
Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
While plastic, it is much stronger than some of the more popular alternatives out there.
Which do you prefer?
http://www.youtube.com/watch?v=rofgMueCOqo
I have a Galaxy Ace which squeaks a bit. So I use a case which makes it not squeak at all.
You could try that.
Back squeaking would be gone if you put a business card between battery and back cover, so don't think that it was made due pulling it off in a bad way or anything else!
Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
My battery cover squeaks on the opposite side -- near the power button. Although this is probably because I'm using the official flip cover and the portion of the battery cover near the volume buttons is quite stable and thick. Honestly it was initially annoying as hell because I noticed it a week after getting the phone, but it doesn't bother me as much now. At least it doesn't really exhibit the squeaking when I'm actually using the phone -- only when I'm making myself notice it. LOL.
The buttons (volume and power) are a bit flimsy. Way too easy to press, especially the power button. But I'm using the official flip cover + IntelliCover app. So I don't have to actually USE the power button anymore. Not a real solution, but it's a good workaround for those using flip covers.
One more thing to add to obsession list, bezels tend to squeak on certain points!
bezel is coming off
any one expensed the bezel around the screen coming loose?
bought 4 days and already seeing this
It's like that from beginning... Nothing to worry about! Maybe a mechanism to avoid breaking...
Mine has nothing wrong... no squeaks, no loss buttons
Sent from my GT-N7100 using xda premium

[Q] Creaking sound from Note 2

Hi guys,
So I noticed a creaking sound coming from my Note 2 when I flex it. I wasn't flexing it hard, just a gentle bend back and forth. So I took the back cover off to see if it was that, however the creaking sound was still there. I played around with it a bit and found that the sound was being made from the bottom left hand side of the phone (when screen is facing down). This is where the S-pen silo is, and it is the plastic around there that is making the noise. I'm wondering if anyone else has this 'issue' and would it be a problem? thanks
Samsung plastic at work. Normal.if it bothers you a lot get a back cover or stop squeezing
Lol. And the normal use of a phone includes flexing it like that. Oh my
Sent from my Samsung Note II.
Thanks guys, I was just wondering if was going to be an issue, because it didn't really sound good :good:
Hahah the reason I found out about this was from taking my case off the phone. I started flexing the device after I noticed the sound to investigate what it was.

Squeaking bezel and battery cover might be features???

I noticed that pressing bezel at certain points and battery cover makes a click sound, then I came across a solution for battery cover by one of users here: putting a business card between battery and cover, it works and makes it completely silent.
So I think this space between battery cover and battery and those points on bezel might be noisy/bad implemented solutions to avoid cracks on bezels which are wide spread among Galaxy S2s and S3s (they appear out of nowhere and seem to be due thermal expansion & contraction)... Does anyone agree? Any ideas?
Eienkei said:
I noticed that pressing bezel at certain points and battery cover makes a click sound, then I came across a solution for battery cover by one of users here: putting a business card between battery and cover, it works and makes it completely silent.
So I think this space between battery cover and battery and those points on bezel might be noisy/bad implemented solutions to avoid cracks on bezels which are wide spread among Galaxy S2s and S3s (they appear out of nowhere and seem to be due thermal expansion & contraction)... Does anyone agree? Any ideas?
Click to expand...
Click to collapse
The upper bezel squeacks because of the motion setting.
If you enable and double tap the upper bezel in emails/contact the list will scroll to the top.
You can try just by pressing and not tapping, it still works
Aint working here... only double tap works.
Any other ideas? What about battery cover?
I also have this problem with squeaking battery cover. I have idea that it showed up because of leaving phone in pocket while I tie a shoe and the battery cover gets pressed too hard. Few days back I also noticed that I have very small crack in battery cover that I can feel with nail. Very annoying sound and not impressed with quality Soon I will get cover case for note but if the sound will be there, I will need a replacement battery cover...
Samsung's Plastic At It's Finest.
I dont think it has anything to do with pressure... I have never put it under any slight pressure and the squeaking was there as long as I remember...
Any new ideas about this issue? I also get some squealing noise when I press batter cover. Tried putting some duct tape, but it is not working, sometimes it even gets worse.
All suggestions are welcome
Yes
What models do you all have because I have not had this problem at all and I have the front cover.
Sent from my SPH-L900
I noticed this because I constantly remove my battery to do a swap and charge it externally. There was another post about this recently that I posted in. I resolved the problem by replacing my bezel/frame. I had some small scratches and a ding on it from my desk so I felt compelled to make it look new. I noticed the small plastic tabs that the battery door connects to are fragile and break off from constant removal of the door.
The bezel was around $20 with a new battery door with NFC, not to mention only taking 15 minutes.
shatroghistro said:
Any new ideas about this issue? I also get some squealing noise when I press batter cover. Tried putting some duct tape, but it is not working, sometimes it even gets worse.
All suggestions are welcome
Click to expand...
Click to collapse
I put a small strip of duct tape on each side of the battery and then when I put the battery back in its spot the fit was quite tight but all my squeaks were gone. The device feels much more solid now.
Sent from my SGH-I317M using xda app-developers app
Thx, I'll try
This is completely normal for the Note 2. After a while the plastic pieces are no longer aligned precisely due to heat, pressure, cheap quality just like korean cars.

Categories

Resources