I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
buttons do feel a bit loose, but no biggie for me especially those on volume. battery cover squeaks a bit when pressed too hard, but it's plastic, and plastic with right amount of pressure squeaks.
I have minimal movement in the buttons. A fraction of a millimeter, if any. I have absolutely no squeek with normal use but can fine an area that squeeks if i try hard. Make sure your cover is properly fitted.
Mine doesn't squeak in normal use either but if I push it, it will!
Stupid thread
Sent from my GT-N7100 using xda premium
ChimpNippl3s said:
Stupid thread
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ha ha ha
No this isnt stupid thread.
I have some problems. F... Phone for 600Eur
I hate plastic, so I hate Samsung for that. But sorry the buttons don't feel loose, and what do you mean by back plate squeaks near speaker grill, when do you try to open it or just normally press it when it's firmly sitting there? If it's the latter then mine doesn't squeak too.
But other than these, I don't like build quality, how can I when it's all plastic!
My phone makes an awful noise when I drop it. Solution - don't drop it.
My phone makes a noise when I press the back cover. Solution - don't press the back cover.
Is pressing the back cover of the phone something that you need to do in normal use?
Anyhow I saw a comment a while ago that taking the cover off or putting it on in a certain way can damage the tabs along the edge and cause it to squeak. Check the tabs and see if they are all there or are damaged
Sent from my Samsung Note II.
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
I agree! Infact on S2 the bottom bulk ensure that I hold the phone the right way. Holding Note 2 is a dicey affair as its symmetrical design makes it difficult to know the orientation. I HATE glossy plastic button against the Matte finish, practically indestructible thin plastic on S2. Although I don't like the exposed bottom bulk which is not covered by the battery cover! I personally prefer the plastic cover on Galaxy R which completely cover the back including the area around the MicroUSB port which can easily get scratched otherwise.
Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
While plastic, it is much stronger than some of the more popular alternatives out there.
Which do you prefer?
http://www.youtube.com/watch?v=rofgMueCOqo
I have a Galaxy Ace which squeaks a bit. So I use a case which makes it not squeak at all.
You could try that.
Back squeaking would be gone if you put a business card between battery and back cover, so don't think that it was made due pulling it off in a bad way or anything else!
Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
My battery cover squeaks on the opposite side -- near the power button. Although this is probably because I'm using the official flip cover and the portion of the battery cover near the volume buttons is quite stable and thick. Honestly it was initially annoying as hell because I noticed it a week after getting the phone, but it doesn't bother me as much now. At least it doesn't really exhibit the squeaking when I'm actually using the phone -- only when I'm making myself notice it. LOL.
The buttons (volume and power) are a bit flimsy. Way too easy to press, especially the power button. But I'm using the official flip cover + IntelliCover app. So I don't have to actually USE the power button anymore. Not a real solution, but it's a good workaround for those using flip covers.
One more thing to add to obsession list, bezels tend to squeak on certain points!
bezel is coming off
any one expensed the bezel around the screen coming loose?
bought 4 days and already seeing this
It's like that from beginning... Nothing to worry about! Maybe a mechanism to avoid breaking...
Mine has nothing wrong... no squeaks, no loss buttons
Sent from my GT-N7100 using xda premium
Related
Over all I'm happy with the build quality of my GSM GNex, but it has one minor flaw.
The plastic edge around the screen. Top, Bottom and Right side are perfect and rounded smooth (just like my SGS2), but the left edge i kinda rough and not rounded and smooth like the others. It has a rough feel with a slight sharp feel if you slide your finger over it and makes a "small" rough sound.
Do any of you recognize this? Or is your GNex perfectly smooth like the SGS2?
mine feels uniformly smooth on all sides. one thing i don't like though is dust being trapped in between the said edges and screen. other than that it's flawless
I'm very happy with the build quality on my verizon version.
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
My problem .... frigging power button on side of the phone!!! I have to be so careful not to do a screen shoot its just unbelievable ...only other way of switching screen on or off is to hold the phone form top instead resting it on your palm
Sent from my Galaxy Nexus using xda premium
My Gnex is perfectly solid despite having dropped it on tile twice. Yeah, I'm a klutz. There aren't any creaks in it, no popped-up glass, buttons are smooth, no loose or rough joins anywhere.
As I mentioned in another thread, the "flimsy" back cover of the Gnex has an advantage in that it doesn't fly off and let the battery go as well when the phone is dropped. Every smartphone I've ever owned would, when dropped, fly in three different directions when it hit the ground- phone in one direction, back cover in another, battery in another. The Gnex stays in one piece.
Somehow I've only managed to break two phones in my life despite my constant accidental drop testing. Neither of the broken phones was a Samsung (one was a SE X10 dropped into a sinkful of water, the other a BlackBerry dropped on pavement). Admittedly the Samsungs feel a little flimsy next to a lot of high-end phones, but the fact that they are lightweight and plastic actually makes them more durable, IME.
Mine is fine, outside of one extremely annoying issue. The vibrate motor on my unlocked GSM Nexus makes the phone rattle on the bottom right side (obviously where the motor is housed) if I'm not holding the phone on that side. I am normally a vibrate all the time guy...now I only have it vibrate for phone calls because it annoys me so much. I love how powerful and silent the motor is when I'm holding it...(at least compared to my Droid Incredible 2). My Verizon Nexus didn't do this at all before I returned it. Sad.
Lodion said:
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
Click to expand...
Click to collapse
Argh, hadn't noticed that before. cannot unhear the clicking noise
put a layer or two of masking tape on the back of the cover until the space has been taken up. problem solved.
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
This shoud fix the battery cover problem http://www.ebay.com.au/itm/Metal-ba...858658?pt=PDA_Accessories&hash=item2a1808d5e2
@rbiter said:
My software buttons are uneven. Vertically.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Mine too. I've exchanged 3 times and they all have the same problem. I think it is because of the curved glass.
Sent from my Galaxy Nexus using Tapatalk
My software buttons are uneven. Vertically.
Click to expand...
Click to collapse
I am curious. What are you talking about here? do you mean the virtual buttons on the bottom are not aligned? Could you do a screenshot to show what you mean if that is the case? I have never heard of that one before.
@rbiter said:
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Lol. I had to quote myself. Guess the joke was missed.
Sent from my Nexus in Texas.
Thanks for all the replies. I ended of returning my GNex as a DOA, so now I'm waiting for a new one.
I've been holding off buying the S III for some time in hopes of something better, but nothing has come along so I finally bit the bullet. I bought a new white one off ebay for $450, which is on the cheaper side. It came with a rather deep scratch on the bottom right on the chrome, but frankly its hard to notice and the rest of the phone seems to work fine. Wanted to ask a few questions and make a few comments.
1. Screen is the best AMOLED screen period. The lack of reflection and infinite viewing angles puts it head and shoulders above all phone IPS screens I've used. Also on a completely different level to the beta AMOLED screens Samsung was churning out. None of the pixelation, dithering, artifacts, lines, blotches, and crap from the S II or the Note. It doesn't turn to crap when I dim the screen, and looks very nice and even like that. The saturation has been toned down as well and looks better. However, I wish the greens were not so BLUE and the skin tones were less ghastly red/yellow/orange.
2. My volume keys are firm and clicky, but my power button is kind of loose. Will it deteriorate over time?
3. The battery cover is still a horrible design. My left side snaps into place completely, but there is a gap that you can put a fingernail and also feel the seam and slight hump since its not flush. This is normal for Samsung right? My Note also had a battery cover problem. It would ot snap in, and I had to jam it in at a very sharp angle and bend the cover back heavily. At least that was flush. This one is not. Also noticed looseness on the top corners with the S3, especially when you move the phone around or hold it in landscape and either push the corners a bit or hold onto them. I think this is endemic to the S3 since all the display phones at my local store had the same problem, along with the entire cover being taped up since they were coming off of course.
4. The home button is hard to press. I also noticed this on the demo models. Why couldn't it be more like the iPhone's button? The amount of force required to push it, its location at the very end of the phone, and the lightweight nature of the phone means I have to hold the phone firmly down or the entire thing just might bounce out of my hand. I usually have to hold the bottom underneath the button and pinch down with my thumb. That's not very satisfying either, since I am also pushing up into a looser part of the back cover and it flexes a bit, especially since there's that hole where the microUSB plugs into. I try to avoid using the home button and use back all the way if possible.
5. The phone is fast, but not blazingly fast or smooth. It's better than my old One X. Still far from the smoothness of a Windows Phone device. Hopefully Jelly Bean will help a lot.
6. They need to disable the capacitive keys during camera mode. I always end up pushing one or both of them and exiting the camera or getting edit popups. Same problem I had on the Note.
7. Phone looks and feels a million times better without the rim sticking out above the glass surface. It's more prone to damage, but I'll take the look and unimpeded finger swiips any day.
8. The Note had a much much better speaker. The S3 sounds like an S2 without the back cover helping muffle it.
katamari201 said:
I've been holding off buying the S III for some time in hopes of something better, but nothing has come along so I finally bit the bullet. I bought a new white one off ebay for $450, which is on the cheaper side. It came with a rather deep scratch on the bottom right on the chrome, but frankly its hard to notice and the rest of the phone seems to work fine. Wanted to ask a few questions and make a few comments.
1. Screen is the best AMOLED screen period. The lack of reflection and infinite viewing angles puts it head and shoulders above all phone IPS screens I've used. Also on a completely different level to the beta AMOLED screens Samsung was churning out. None of the pixelation, dithering, artifacts, lines, blotches, and crap from the S II or the Note. It doesn't turn to crap when I dim the screen, and looks very nice and even like that. The saturation has been toned down as well and looks better. However, I wish the greens were not so BLUE and the skin tones were less ghastly red/yellow/orange.
2. My volume keys are firm and clicky, but my power button is kind of loose. Will it deteriorate over time?
3. The battery cover is still a horrible design. My left side snaps into place completely, but there is a gap that you can put a fingernail and also feel the seam and slight hump since its not flush. This is normal for Samsung right? My Note also had a battery cover problem. It would ot snap in, and I had to jam it in at a very sharp angle and bend the cover back heavily. At least that was flush. This one is not. Also noticed looseness on the top corners with the S3, especially when you move the phone around or hold it in landscape and either push the corners a bit or hold onto them. I think this is endemic to the S3 since all the display phones at my local store had the same problem, along with the entire cover being taped up since they were coming off of course.
4. The home button is hard to press. I also noticed this on the demo models. Why couldn't it be more like the iPhone's button? The amount of force required to push it, its location at the very end of the phone, and the lightweight nature of the phone means I have to hold the phone firmly down or the entire thing just might bounce out of my hand. I usually have to hold the bottom underneath the button and pinch down with my thumb. That's not very satisfying either, since I am also pushing up into a looser part of the back cover and it flexes a bit, especially since there's that hole where the microUSB plugs into. I try to avoid using the home button and use back all the way if possible.
5. The phone is fast, but not blazingly fast or smooth. It's better than my old One X. Still far from the smoothness of a Windows Phone device. Hopefully Jelly Bean will help a lot.
6. They need to disable the capacitive keys during camera mode. I always end up pushing one or both of them and exiting the camera or getting edit popups. Same problem I had on the Note.
7. Phone looks and feels a million times better without the rim sticking out above the glass surface. It's more prone to damage, but I'll take the look and unimpeded finger swiips any day.
8. The Note had a much much better speaker. The S3 sounds like an S2 without the back cover helping muffle it.
Click to expand...
Click to collapse
1. There is a setting in display settings to adj screen tone. See if that helps.
2. Some have reported this, but mine is fine. Not loose at all.
3. The battery cover while flimsy i agree, should snap on with ease. No raised or humped section, no gap for a fingernail... almost sounds like yours took a nasty fall or other impact... it should fit just fine with no blemishes.
4. Home isnt hard to push. Agree though that it couldve been implemented much better.
5. Imho, this thing screams. Never had any problems with lag or not being smooth and speedy. Top of the line if you ask me.
8. Speakers fine for me, for what it is. I never expect the external speaker to be super high quality.
Sent from my SGH-T999 using xda app-developers app
On the screen issue, have you gone out to broad daylight and trying to see the screen? Its tough. I still prefer IPS screens.
The home button is hard to press. Being accustomed to only capacitive buttons, the home button is tough to press. Even more so with my ballistics case.
The back is plastics but it gets the job done
The power button is sturdy and fine on my end
I agree with the camera button.
I also got mine from eBay about a month ago for 469 and although it was used, it was kept and very good condition. All I have is a small line on the gray part of the phone by the volume button that only extends about 2 mm. Sometimes I forget its there. The screen is my biggest letdown. Coming from 2 LG devices, the IPS screen is the best screens in my opinion. Natural colors, awesome brightness. This one is good I enjoy it but its not great.
Sent from my Rooted Gameboy
Hey man.. Cool thing you got an s3 but if I was you, I would of waited til tomorrow for the nexus 4 and paid 100$ less.
Sent from my SGH-T999 using xda app-developers app
Crisisx1 said:
Hey man.. Cool thing you got an s3 but if I was you, I would of waited til tomorrow for the nexus 4 and paid 100$ less.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I played with an Optimus G in-store, basically a Nexus 4. Did not like it AT ALL. The glass was icky. Was not impressed by the display. It was washed out looking. This is in comparison to the One X and iPhone, not just AMOLED.
IPS is better outdoors and at max brightness. However, indoors at low brightness the contrast looks way better on the AMOLED screen of the GS3.
Oh man the 5" HTC Droid DNA is coming out. If it can be unlocked for GSM networks, I'm itching the jump again...haha I had the Note two months ago too.
I'm getting buyers remorse from the build quality. Just holding or moving the phone around and taking it out of my pocket, there's always a creak or a flex from the loose back cover. The phone is kinda slippery and clammy, not much to hold on to, and the jiggly power button. I said I would never buy another Samsung phone because of build, but here I am again...a sucker for the screen!
3. My battery cover is perfectly flush. I have pulled it off to change sd cards and once when initially rooting.. I simply put it in place and smoothly press the edges while moving around the whole phone.. all click in, flush
5. check to see if Power saving mode is on, and if cpu saving is on in power saving ... if it is, chances are your phone is only hitting 1GHz
when power saving is off (via the handy toggle in the notification shade dropdown), phone is allowed to hit full 1.5 GHz
another reason for some speed loss is the samsung touchwiz environment.. beautiful, but a bit heavy
jellybean from a google/nexus base IS faster, but mainly cuz it is more bare
cheers!
Samsung Galaxy S3, 16GB, pebble blue
rooted, running jellybean 4.1.1 on touchwiz-based Xquizit xD rom
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
AznDud333 said:
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
Click to expand...
Click to collapse
you sure you have the case completely snapped in?
Tidbits said:
you sure you have the case completely snapped in?
Click to expand...
Click to collapse
yep, took it off and put it back on several times, you would only notice it if you were holding it to play a game like asphalt
the creaking cover is near the part where you stick your nail in to take the cover off
while the bezel creaks right above the volume button
AznDud333 said:
yep, took it off and put it back on several times, you would only notice it if you were holding it to play a game like asphalt
the creaking cover is near the part where you stick your nail in to take the cover off
while the bezel creaks right above the volume button
Click to expand...
Click to collapse
You using the stock cover or a flip cover? Mine doesn't creak at all or maybe I am just deaf.
AznDud333 said:
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
Click to expand...
Click to collapse
Definitely do, been having the issue for a while. ..
Tidbits said:
you sure you have the case completely snapped in?
Click to expand...
Click to collapse
Tidbits said:
You using the stock cover or a flip cover? Mine doesn't creak at all or maybe I am just deaf.
Click to expand...
Click to collapse
im talking about the battery cover, not the case lol
mine has creaking near the speaker only on a certain spot its not that bad
Nope, mine does not either. Don't you hate it when you like your phones flawless then you find something minor that really isn't a big deal..... but drives you crazy? LOL
Sent from my SGH-T889 using xda premium
Mine is bad near the led for the camera
Sent from my GT-N7105 using xda premium
My mom's Gnote 2 on AT&T does this as well. Its annoying, but I think they all do this to some extent. If you take the battery door off it doesn't do it. But when you place the device to your ear for calls you can hear the creaking.
Mine used to be silent, but then with me taking it off and on a hundred times trying to figure out the wireless charging I think the tabs get a little worn and don't hold the cover in place as tightly as when new. Sucks, but I bet money a new battery cover will fix it. I just try not to pay attention. I know, that's not what we should have to do with a $650 device, but it is what it is (still the best phone on the market).
I chatted with Samsung asking if this was normal and he said no. I don't think the Galaxy S III had any creaking going on.
Can more people comment?
farfromovin said:
Mine used to be silent, but then with me taking it off and on a hundred times trying to figure out the wireless charging I think the tabs get a little worn and don't hold the cover in place as tightly as when new. Sucks, but I bet money a new battery cover will fix it. I just try not to pay attention. I know, that's not what we should have to do with a $650 device, but it is what it is (still the best phone on the market).
Click to expand...
Click to collapse
Jajaja same here. Right behind the volume buttons. Was not successful with the wireless charging. I think with time or exsecive on/off its bound to happen on a plastic cover. It's flimsy on its own but on the phone, I'm surprised how sturdy it is.
Sent from my SGH-T889 using Tapatalk 2
The Samsung Flip Cover replaces the battery door with one that is slightly thicker. It's not really noticeable, but the phone feels a lot more solid and all of my creeks went away.
MattMJB0188 said:
I chatted with Samsung asking if this was normal and he said no. I don't think the Galaxy S III had any creaking going on.
Can more people comment?
Click to expand...
Click to collapse
Never had that issue with the SIII, but it is an issue with the Note II. Samsung was no help and doesn't have the T-Mobile version in stock yet. A rep told me "this is the first we are hearing of this issue".
Fedway said:
The Samsung Flip Cover replaces the battery door with one that is slightly thicker. It's not really noticeable, but the phone feels a lot more solid and all of my creeks went away.
Click to expand...
Click to collapse
I got a flip cover, but it's hard to use the phone 1 handed... when you pull it out, you need to flip the flap without dropping the phone... and then it kinda hangs there uselessly unless you fold it behind the back which feels weird... I don't know, it looks sleek as heck, but more annoying than useful IMHO
In any case, I'm using my Nilkin case with my Note II and with that I don't hear any creaking because it's a hard shell case, actually makes the phone feel better in the hand (I swear Samsung wants us to drop the phone by making the largest, most unwieldy phone and then putting it into a glossy, plasticky and slippery frame. Sheesh, why can't they take a note from HTC and put some rubberized plastic on it? At least it'll be more scratch resistant.
My back cover and case creak, so annoying! Hope to see some replacement back covers with NFC soon to see if I can fix this...
figured out the issue, the bezel appears to be "loose"
even if it seems perfectly attached, try pushing it in towards the centre abit(so it exposes more glass), mine popped and the creaking is mostly gone.
bezel loose?
AznDud333 said:
figured out the issue, the bezel appears to be "loose"
even if it seems perfectly attached, try pushing it in towards the centre abit(so it exposes more glass), mine popped and the creaking is mostly gone.
Click to expand...
Click to collapse
I find it very difficult to wake the phone with the power/wake button. Just the angle of the bezel and how flush the IR button is makes it much more of a chore compared to any other phone I've used. Does anyone know of a case that can remedy the situation? I don't care if it covers the IR.
I bought the poetic case off amazon (3rd revision) and it doesn't help with the flush power button issue. Since no one responded I'll keep updating as I get more cases. Sad.
I don't know how tough it is to remove the old poetic case (since everyone seem to gush about how difficult it is) but I don't find it very hard. Simply pry open one corner then expand the gap and it pops off pretty easily. I much rather have a tight case than a lose one *wink*
Currently waiting on basal case. Don't know if I should just exchange then phone because of the recessed button.
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
isinisterx said:
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
Click to expand...
Click to collapse
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Sent from my HTC One S using Tapatalk 2
Well thanks for that lool
Here is my remedy for the power button and its awkward position. Never use it. Find a kernel with swipe to wake and then I use a sleep widget on the home screen to sleep. I double tap the bottom of the screen to wake it up. Works perfectly
I got the urban armor gear one off of ebay
Sent from my HTC One using xda premium
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
xxquicksh0txx said:
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Click to expand...
Click to collapse
That's because it is made of silicone. That's one material I hate... yes, even in the other way.
fffssslll said:
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
Click to expand...
Click to collapse
Hmmm... for the time I'm running CM 10.1, I'm using volume wake and hold menu to lock. I'm sure it saves battery life because the capacitive panel is off when asleep. Plus when I had S2W enabled, it seemed that I could never get it right the first time.
Agreed, I too also had this case on my one s and it's really crappy and too loose in the areas where the hard plastic doesn't wrap the case
Sent from my HTC One using xda premium
The urban armor gear makes the volume button so much better than without it, though the wake button stays the same maybe even abit worse..
Got my m8 today really liking it. I be just noticed one issue my volume button is very loose, is that normal? I don't think it is but has anyone else noticed?
riz157 said:
Got my m8 today really liking it. I be just noticed one issue my volume button is very loose, is that normal? I don't think it is but has anyone else noticed?
Click to expand...
Click to collapse
Mine is very secure. It don't feel loose.
Mine is pretty firm
Sent from my HTC6525LVW using xda app-developers app
Mine wiggles a little, but it's not going anywhere.
Sent from my HTC6525LVW using xda app-developers app
Mine feels a bit loose too. Only very slightly when holding the phone and accidentally touching it, but it's noticeable.
Thanks for replies. I'm thinking it's faulty mine is pretty loose it's probably not going to fall off but just don't like all the wiggling.
riz157 said:
Thanks for replies. I'm thinking it's faulty mine is pretty loose it's probably not going to fall off but just don't like all the wiggling.
Click to expand...
Click to collapse
Mine has just the slightest wiggle side to side - but doesn't feel "faulty" per se. I can only even tell it wiggles by looking at it and pushing it to a side, otherwise I'd of never noticed.
mine is very very loose, annoyingly so
looks like it's falling out and makes a rattling noise when touched
receiving a replacement soon hopefully wont have the same fault
Not a fault, as someone mentioned earlier the volume rocker is made of metal like the body and so cannot have such a snug fit as if it were plastic. So learn to live with it guys!
Maximus78 said:
Not a fault, as someone mentioned earlier the volume rocker is made of metal like the body and so cannot have such a snug fit as if it were plastic. So learn to live with it guys!
Click to expand...
Click to collapse
Why is that then? metal can be machined to very high tolernces, much tighter than plastic.
kingdeacon said:
Why is that then? metal can be machined to very high tolerances, much tighter than plastic.
Click to expand...
Click to collapse
It's for this reason that there is a little play I believe. If I think about other machined parts such as on my Aprilia motorcycle there will be some kind of rubber bushing or shims to prevent play between the two machined parts. But with plastic such as my One X volume rocker, at first there was no play at all but after some time that changed and now it feels just as loose or wobbly as my new M8. I have the gel case on now so don't worry so much about the wobbly volume rocker :good:
Maximus78 said:
It's for this reason that there is a little play I believe. If I think about other machined parts such as on my Aprilia motorcycle there will be some kind of rubber bushing or shims to prevent play between the two machined parts. But with plastic such as my One X volume rocker, at first there was no play at all but after some time that changed and now it feels just as loose or wobbly as my new M8. I have the gel case on now so don't worry so much about the wobbly volume rocker :good:
Click to expand...
Click to collapse
no really, it's a fault
if you tilt my handset it hangs out, it started doing it after using it for a while, feels like a spring came off/broke etc, looks like it's hanging on by a thread
it is not at all normal, there's no way it's meant to be like that
lmw85 said:
no really, it's a fault
if you tilt my handset it hangs out, it started doing it after using it for a while, feels like a spring came off/broke etc, looks like it's hanging on by a thread
it is not at all normal, there's no way it's meant to be like that
Click to expand...
Click to collapse
No doubt about it mate, a little play is acceptable but hanging out is definitely a fault. Hope you get it sorted.
new one has been delivered and it's a lot better, still slightly loose but not hanging out
actually now it's gone the same, it's ok with a case but without it feels awful
I'll keep this one but if it stops working I'll send it back
I am paying less than I was before upgrading so I can deal with it but anyone buying this sim free for a large amount of cash, would be disappointed with the quality of the volume rocker
Can someone with a ticket that looks like it's about to fall off, post a picture of it, I'm interested in hire it looks?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
im interested in this as well.
I bought my phone last night. noticed it this morning that the volume rocker is a bit loose. it doesn't hang out or anything but it can move up and down (towards the front screen and back).
most annoying thing is when moving the phone around, you can hear the loose volume rocker.
=(
Confirmed this is definitely an issue.
Bought one today and it was quite loose. Went back to the store and checked the display model and it was the same.
Gent there opened up a new one and it was less loose so I took it for the moment but it seems to be getting more loose as I use it. Probably going to return again, but how many times before I get one that is correct and how do I know it will not develop the looseness...
edit: If you shake with any force it it actually rattles!
I've had the free case on it for most of the day and I haven't noticed the loose rocker
anyone planning to use a case will be fine, without one it would annoy me massively, especially the noise when tilting the phone..I don't think it's going to actually fall out though
my handsets are both from o2, both same issue so I don't see much point in sending it back again, I will contact them and see if they have had many returned
I seriously doubt it's meant to be this loose
---------- Post added at 04:14 AM ---------- Previous post was at 03:57 AM ----------
this review actually mentions it rattling around horribly..perhaps this is why they give you a case in the box..would be good to know for sure to save people replacing the phone over and over again
The one sore point in the build quality is with the thin volume rocker, which rattles around horribly. It’s a particular shame seeing as the rocker can also double up as the camera shutter.
http://www.gizmodo.co.uk/2014/03/htc-one-m8-review-a-one-two-knockout-punch/
[QUOTED=lmw85;51600717]mine is very very loose, annoyingly so
looks like it's falling out and makes a rattling noise when touched
receiving a replacement soon hopefully wont have the same fault[/QUOTE]
Did you have to ship back first to get a replacement? Mine is super flimsy, but I'm lazy to have to swap back to a micro sim if I have to ship back first. I can hear the key move when I move the phone, even makes a noise when the phone vibrates.