Related
after installing this themeto my rooted phone, the phone will no longer recognize my sim card
after rooting phone and sim worked just fine
no problems until I installed this new theme
Poppuri Simple Theme Edition Transparent Version
http://forum.xda-developers.com/show....php?t=1967594
I love the theme but for some reason it doesnt recognize I have a sim card installed.
did i accidentally fry my SIM during installation?
or are there some settings for AT&T I need to make?
any help/direction would be appreciated
thanks
and to make matters worse CWR cant find my backup file.
so I am stuck with this theme and no SIM/service.
how do you go back to stock?
or fix the sim issue?
PLEASE
back to stock
what is the best way to get back to out of box condition? (if I cant get the sim issue resolved)
I have tried a few stock root updates through ODIN and I keep getting errors. I think its because the firmwares are diffrent regions than my origonal USA AT & T.
please
thank you
Jon
ok seriously, I'll pay $$$ to anyone who can help me fix this
If anyone can help me fix this I will pay pal you $50
You flashed a ROM that's intended for international note 2 (N7100) on your US variant note 2 (N7105). There's your problem. The modem for US phone is different than international since US has LTE and International doesn't.
What you need to do is..
Go to samfirmware.com
Create an account and search for AT&T US N7105 note II firmware and download it.
Go into download mode on your phone and use odin to flash the firmware into your phone. And next time if you're going to flash something make sure it was made for the phone you're using.
MohJee said:
You flashed a ROM that's intended for international note 2 (N7100) on your US variant note 2 (N7105). There's your problem. The modem for US phone is different than international since US has LTE and International doesn't.
What you need to do is..
Go to samfirmware.com
Create an account and search for AT&T US N7105 note II firmware and download it.
Go into download mode on your phone and use odin to flash the firmware into your phone. And next time if you're going to flash something make sure it was made for the phone you're using.
Click to expand...
Click to collapse
awesome.... thanks very much. I was wondering if that was the issue.
US note 2 isnt avaialble on sams firmware though (as far as I can find)
I will keep searching and post progress
thanks again
Oh then try to search for a rom in the AT&T Note II forum in xda
http://forum.xda-developers.com/forumdisplay.php?f=1870
Im sure you'll find a rom or two in there...
MohJee said:
Oh then try to search for a rom in the AT&T Note II forum in xda
http://forum.xda-developers.com/forumdisplay.php?f=1870
Im sure you'll find a rom or two in there...
Click to expand...
Click to collapse
found the 7100 rom but I am getting errors in odin says cant read line 1417.
i noticed my phone is model sgh1317 when i removed the battery, is this the same as 7100 or do i need a diffrent rom to flash?
farmerjonbmx said:
found the 7100 rom but I am getting errors in odin says cant read line 1417.
i noticed my phone is model sgh1317 when i removed the battery, is this the same as 7100 or do i need a diffrent rom to flash?
Click to expand...
Click to collapse
found the us version "original factory stock firmware for United States version of Samsung Galaxy Note 2 SGH-I317"
downloading now. hopefully it will falsh.
If I cant get this thing fixed what are my options?
Can I send it somewhere to get wiped and re flashed?
Hello All,
My brother just bought a SGH-T889 from T-Mobile and would like to get it all juiced up. I myself own an SCH-i605 (Verizon GN2) and am rooted, bootloader unlocked, and am running CleanROM 4.0.5 w/Perseus 30 kernel. I have some questions regarding how to proceed with the T-Mobile Device:
Quick Note: I have already Rooted my brother's SGH-T889 and have TWRP up and running as his recovery. He is running stock ROM w/Root.
Question 1: Does T-Mobile have a "locked bootloader" on the SGH-T889 like I did on my Verizon SCH-I605? If so, how do I unlock it?
Question 2: Does anyone know of a ROM that is similar to CleanROM for the SGH-T889? To my knowledge, that ROM isn't supported on T-Mobile. CleanROM provides the overall stock experience less the bloatware with some additional mods. Note: My brother purchased an 64GB MicroSD Class 10 SanDisk card that I plan on running the app2sd script on (using SManager), so the ROM must support the exFAT 64GB formatted card. I know some ROM's do not offer 64GB compatibility, so that is something I need to be weary of. Perseus Kernel support would also be great.
Thank you so much!
Your resident Tax-Affiliated Friend,
The Taxmaster
Taxmaster said:
Hello All,
My brother just bought a SGH-T889 from T-Mobile and would like to get it all juiced up. I myself own an SCH-i605 (Verizon GN2) and am rooted, bootloader unlocked, and am running CleanROM 4.0.5 w/Perseus 30 kernel. I have some questions regarding how to proceed with the T-Mobile Device:
Quick Note: I have already Rooted my brother's SGH-T889 and have TWRP up and running as his recovery. He is running stock ROM w/Root.
Question 1: Does T-Mobile have a "locked bootloader" on the SGH-T889 like I did on my Verizon SCH-I605? If so, how do I unlock it?
Question 2: Does anyone know of a ROM that is similar to CleanROM for the SGH-T889? To my knowledge, that ROM isn't supported on T-Mobile. CleanROM provides the overall stock experience less the bloatware with some additional mods. Note: My brother purchased an 64GB MicroSD Class 10 SanDisk card that I plan on running the app2sd script on (using SManager), so the ROM must support the exFAT 64GB formatted card. I know some ROM's do not offer 64GB compatibility, so that is something I need to be weary of. Perseus Kernel support would also be great.
Thank you so much!
Your resident Tax-Affiliated Friend,
The Taxmaster
Click to expand...
Click to collapse
CleanROM ACE works on my SGH-T889 with no problems. I also use the Perseus T889 Kernel, which is great.
xjdude42 said:
CleanROM ACE works on my SGH-T889 with no problems. I also use the Perseus T889 Kernel, which is great.
Click to expand...
Click to collapse
Could you please post the link to the T Mobile variant? Did you have to do something special to install it?
Sent via Tapatalk 2 using my:
Verizon Galaxy Note 2 (SCH-I605)
Unlocked, Overclocked, and Undervolted
CleanROM 4.0.5 w/Perseus 30 Kernel
Taxmaster said:
Could you please post the link to the T Mobile variant? Did you have to do something special to install it?
Sent via Tapatalk 2 using my:
Verizon Galaxy Note 2 (SCH-I605)
Unlocked, Overclocked, and Undervolted
CleanROM 4.0.5 w/Perseus 30 Kernel
Click to expand...
Click to collapse
I used the CleanROM "ACE" (All Carrier Edition) found in the AT&T forum: http://forum.xda-developers.com/showthread.php?t=1986893
Nothing special to install, just made a nandroid backup through CWM, did a factory wipe, and flashed with CWM.
This is the version of Perseus Kernel that I used :http://forum.xda-developers.com/showthread.php?t=1960935
From what I have read, it would be advisable to backup your EFS partition first as explained here: http://forum.xda-developers.com/showthread.php?t=2026749
xjdude42 said:
I used the CleanROM "ACE" (All Carrier Edition) found in the AT&T forum: http://forum.xda-developers.com/showthread.php?t=1986893
Nothing special to install, just made a nandroid backup through CWM, did a factory wipe, and flashed with CWM.
This is the version of Perseus Kernel that I used :http://forum.xda-developers.com/showthread.php?t=1960935
From what I have read, it would be advisable to backup your EFS partition first as explained here: http://forum.xda-developers.com/showthread.php?t=2026749
Click to expand...
Click to collapse
Can anyone else confirm that you do not need to "UNLOCK" the Bootloader on the T-Mobile variant of the GN2?
I did not have to unlock bootloader. And am running cleanrom at&t on my t889. Working perfectly and has great battery life.
Taxmaster said:
Hello All,
My brother just bought a SGH-T889 from T-Mobile and would like to get it all juiced up. I myself own an SCH-i605 (Verizon GN2) and am rooted, bootloader unlocked, and am running CleanROM 4.0.5 w/Perseus 30 kernel. I have some questions regarding how to proceed with the T-Mobile Device:
Quick Note: I have already Rooted my brother's SGH-T889 and have TWRP up and running as his recovery. He is running stock ROM w/Root.
Question 1: Does T-Mobile have a "locked bootloader" on the SGH-T889 like I did on my Verizon SCH-I605? If so, how do I unlock it?
Question 2: Does anyone know of a ROM that is similar to CleanROM for the SGH-T889? To my knowledge, that ROM isn't supported on T-Mobile. CleanROM provides the overall stock experience less the bloatware with some additional mods. Note: My brother purchased an 64GB MicroSD Class 10 SanDisk card that I plan on running the app2sd script on (using SManager), so the ROM must support the exFAT 64GB formatted card. I know some ROM's do not offer 64GB compatibility, so that is something I need to be weary of. Perseus Kernel support would also be great.
Thank you so much!
Your resident Tax-Affiliated Friend,
The Taxmaster
Click to expand...
Click to collapse
Verizon loves to lock their bootloaders. Tmobile not so much.
Samsung Note N7100 PIT File
Good Day !
I have a Samsung Note N7100 with a strange problem.
I did a hard reset on it and it started acting up.
Now, it cannot go into RECOVERY Mode ( VOLUME UP+ HOME BUTTON + POWER BOTTON )
When i try to turn it into Recovery Mode , the Display comes with FLICKERS .
Moreso, when it is turned on , it comes on with Flickering Display.
But it does go into DOWNLOAD MODE without problems.
I have tried flashing it with different ODIN Versions and FIRMWARES downloaded here on XDA and Samobile but di not help. Error Message : No Partition Files Found .
Basically , i would appreciate it if i can have a link to download a PARTITION File for Note N7100 or any Professional Advice .
Best regards.
TERILEX said:
Good Day !
I have a Samsung Note N7100 with a strange problem.
I did a hard reset on it and it started acting up.
Now, it cannot go into RECOVERY Mode ( VOLUME UP+ HOME BUTTON + POWER BOTTON )
When i try to turn it into Recovery Mode , the Display comes with FLICKERS .
Moreso, when it is turned on , it comes on with Flickering Display.
But it does go into DOWNLOAD MODE without problems.
I have tried flashing it with different ODIN Versions and FIRMWARES downloaded here on XDA and Samobile but di not help. Error Message : No Partition Files Found .
Basically , i would appreciate it if i can have a link to download a PARTITION File for Note N7100 or any Professional Advice .
Best regards.
Click to expand...
Click to collapse
Sounds like eMMc chip failure that was found occasionally on many variants of the Note 2. May need a chip replacement. You can certainly continue to try to repair it through flashing and software, but if the chip is fried, you could look to this link for repair... http://www.mobiletechvideos.com/samsung-galaxy-note-2/
Or you may just choose to accept that your phone is now a 3 year old model and just get a new one. Good luck!
THIS IMAGE WILL ONLY WORK IF YOU BRICKED AFTER UPGRADING TO 4.3 MK3. IT WILL NOT WORK IF YOU WERE ON 4.1.2 JELLYBEAN OR ANYTHING ELSE.
4.3 ONLY
People are looking for this everywhere so I thought a new thread was necessary.
Huge thanks to @thenexusgeneration for dumping this from his new device!!
Enjoy!
I'll be uploading this to my site soon and other mirrors will be available as it is the only currently working image
https://mega.co.nz/#!4s1SQTAA!fVWpGc8Ww-DWv-0VA797V_Bd7MEBOt6EevFuglUNPrQ
so how do people go about using this, backup/restore via recovery menu? asking cause I'm sure you're going to be asked by people who bricked their phones and searching the net for a fix
People who find this will know what to do with it. But no, you don't restore because this fix will unbrick a completely DEAD device. One that won't even power on
Guide is here: http://forum.xda-developers.com/showthread.php?t=2369125
unbrick a completely DEAD
CNexus said:
People who find this will know what to do with it. But no, you don't restore because this fix will unbrick a completely DEAD device. One that won't even power on
Guide is here: http://forum.xda-developers.com/showthread.php?t=2369125
Click to expand...
Click to collapse
if you hard brick on 4.3 you can unbrick now with this new (backup.bin) i have unbrick (2 sprint GS3) ....now the 16gb SD CARD did not work for me i use a (64GB) to get it to work ...i hope it work for you guys to...and yes ...
thanks to thenexusgeneration ....and CNexus..for the backup.bin :good::good::good::good::good::laugh::laugh::laugh:
paco_1 said:
if you hard brick on 4.3 you can unbrick now with this new (backup.bin) i have unbrick (2 sprint GS3) ....now the 16gb SD CARD did not work for me i use a (64GB) to get it to work ...i hope it work for you guys to...and yes ...
thanks to thenexusgeneration ....and CNexus..for the backup.bin :good::good::good::good::good::laugh::laugh::laugh:
Click to expand...
Click to collapse
Over on the DeBrick thread, none of the images (4.3 or otherwise) would work for me, and others with 32gb 4.3 phones. I jtag repaired mine, and made this 32gb image. I re-broke the bootloader on the phone to test it and it works. It requires a 32gb sdcard, I used an off brand class 2 to test with, and it worked the very first time.
So anyone with a 4.3 32gb, try this debrick image:
32gb_43_knox_debrick.img.7z - 26.91 MB (128 MB decompressed)
if you haven't had any luck with anything else.
nvan7891 said:
Over on the DeBrick thread, none of the images (4.3 or otherwise) would work for me, and others with 32gb 4.3 phones. I jtag repaired mine, and made this 32gb image. I re-broke the bootloader on the phone to test it and it works. It requires a 32gb sdcard, I used an off brand class 2 to test with, and it worked the very first time.
So anyone with a 4.3 32gb, try this debrick image:
32gb_43_knox_debrick.img.7z - 26.91 MB (128 MB decompressed)
if you haven't had any luck with anything else.
Click to expand...
Click to collapse
Debrick images are independent of the internal storage size.
CNexus said:
Debrick images are independent of the internal storage size.
Click to expand...
Click to collapse
I would think it wouldn't matter but it does. I have gone over every sites to try to unbrick my phone but none have worked except this. Even with the following method it wouldn't work with 16GB sdcard. Only with 32GB worked for me. Just a little background on my phone setup:
Sprint GS3 16GB 4.3 VPUCMK3
Rooted with CF Rooting method
Bricked by loading NeatROM v3.6 for I9300
pfroz said:
I would think it wouldn't matter but it does. I have gone over every sites to try to unbrick my phone but none have worked except this. Even with the following method it wouldn't work with 16GB sdcard. Only with 32GB worked for me. Just a little background on my phone setup:
Sprint GS3 16GB 4.3 VPUCMK3
Rooted with CF Rooting method
Bricked by loading NeatROM v3.6 for I9300
Click to expand...
Click to collapse
That wasn't what I was referring to, I was referring to the phones storage size not the sdcard's size.
CNexus said:
That wasn't what I was referring to, I was referring to the phones storage size not the sdcard's size.
Click to expand...
Click to collapse
My bad, guess I've been going over the various method that require sdcard to be the same as the phone storage size and had no luck with it.
That you so much for this. Worked perfectly on my friends Bricked S III.
This does work. I have just gotten to download mode after coming from hardbrick QCMUSB_DLOAD mode. You MUST use something > 32g SDHC. I Used 64g SDXC, still worked. I'm back up and running.
Excellent! truly Excellent. XDA community is GREAT!
i need some help. i downloaded something on my sprint s3 that apparently I should not have and immediately hardbricked. Want even turn on no response to buttons etc. What can I do?? I used it for so much other than my phone. Please help
It is best to read the entire thread before posting, to make sure your question has not already been answered. Some users get annoyed when explaining something when the answer is 3 posts above. Unless your S3 is not 4.3 your solution is in the OP. If you cannot download the file, tell them the link is broken.
I recently bought a new "Samsung Galaxy S III 16GB SGH-T999L 4G LTE White - T-Mobile" from Oakland Wireless via Amazon. This is for my fiancé, to replace her broken iPhone 4s. After popping in her T-Mobile sim card, the phone seems to work fine. However, the WiFi calling feature seems to be missing and when we try to perform a software update it ends with "process failed". The installed Android version is 4.1.1.
She went to a T-Mobile store to see if they could help. They were also unable to get the phone to update, and eventually told her that it would never work simply because we didn't buy the phone from T-Mobile. They also told her it would only be a talk and text phone, and wouldn't get data service. However, this last part is clearly false, as she has been using data without any problem.
Does anybody have experience with this issue? Were the folks at the T-Mobile store correct or mistaken?
Also, assuming they are correct and the phone can't be updated over the air, can I just download and install a stock ROM with the latest version and WiFi calling? I have a custom ROM installed on my Galaxy Exhibit, so I am familiar with installing ROMs, but my fiancé doesn't want a custom ROM, she wants stock.
Look in the t mobile s3 section there should be a Odin file you can flash (stock firmware)
Sent from my SM-N900A using XDA Free mobile app
Well first of all the T999L released with 4.1.2 so something doesn't seem right, and it may be why its not updating. To get a better idea of the phone model, can you post a screenshot of the about device section? And I assume you are not rooted correct? Download this app https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo scroll to firmware info and post it here as well
Thanks for the replies!
ryant100 said:
Look in the t mobile s3 section there should be a Odin file you can flash (stock firmware)
Click to expand...
Click to collapse
I didn't see any stock stuff in the tmobile s3 ROM list, but I did a little more searching and found this thread with stock firmware and OTA's:
http://forum.xda-developers.com/showthread.php?t=1949687
Not sure if I should try to do the OTA update or one of the complete firmwares. Any idea why there is no OTA update for 4.3?
serio22 said:
Well first of all the T999L released with 4.1.2 so something doesn't seem right, and it may be why its not updating. To get a better idea of the phone model, can you post a screenshot of the about device section? And I assume you are not rooted correct? Download this app https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo scroll to firmware info and post it here as well
Click to expand...
Click to collapse
Hmmm. Maybe I got the version wrong or maybe it's not really a T999L? She isn't here with the phone right now, so I'll have to get back to you.
I stopped posting the OTA's simply because they're next to useless for us. Fladhing the firmware via Odin has a much greater success rate snd OTA's are notorious for causing all sorts of problems. Just wasn't worth the trouble to post them anymore.
I attached the screenshots from the phone info app. Looks like maybe it's not the LTE model after all? I looked behind the battery, and it also says SGH-T999 with no "L" on the end.
The strange thing is that it shows an LTE mode in the network settings. However, I've never seen it actually use LTE mode, even though T-mobile says it should work at our location (Seattle). Using the Ookla speed test app, I get ~4 Mbps down (the same speed as my Galaxy Exhibit).
I'm thinking about returning the phone if it is not the correct model. I'm curious though, if I try updating the firmware and it doesn't work, can I restore everything exactly to it's current state before I return it? I don't want them to refuse the return because I messed with the firmware.
Ok looks like you got a Frankenstein phone.. That's an at&t bootloader with a Canadian product/model name & T999 build that I've never heard of.. I would just return it or ask for an exchange, not worth it to keep messing with it
Yup. Another one! And its got a csc from the I9300! The LEM build, if I remember right, was the original stock 4.0.4 firmware. But there is way too much conflicting info there for me to be comfortable recommending much of anything.
I just installed that app to make sure it wasn't giving bad info, and it is showing everything correctly for mine.
As for the LTE showing up in the menu, that isnt too uncommon. If you want to know what you are really connected to, check Settings, About Device, Status, Network Type. Best to do this during a large download.
But aside from it being a franken-phone, everything that is related to the T-Mobile model points to it being a non-LTE T999.
DocHoliday77 said:
Yup. Another one! And its got a csc from the I9300!
Click to expand...
Click to collapse
Yeah I noticed that too but guess I forgot to mention it ? so odd how out of nowhere there this wave of franken-phones going around
Thanks for everyone's advice. I'm going to return the phone.
Probably the best choice. Its just more trouble than its worth imo.
Hello!
I am currently with Telus and have just unlocked my S3 after purchasing the unlock code. If the phone is on the stock Samsung ROM, I can insert a Wind or Rogers SIM and it works fine. However, on the CM-12.1-20150519-NIGHTLY-d2att ROM, it will _not_ connect to any other network. I tried manually searching for network but it fails with a message like Unable to search networks.
I'm not sure why this is happening or how to troubleshoot this. I would prefer to stick with a Lollipop ROM for now.
The CM d2att wikki page does say that since CM11, we should be using the d2lte version for this phone. So should I be installing the d2lte ROM instead?
Thank you
ohTwadi said:
Hello!
I am currently with Telus and have just unlocked my S3 after purchasing the unlock code. If the phone is on the stock Samsung ROM, I can insert a Wind or Rogers SIM and it works fine. However, on the CM-12.1-20150519-NIGHTLY-d2att ROM, it will _not_ connect to any other network. I tried manually searching for network but it fails with a message like Unable to search networks.
I'm not sure why this is happening or how to troubleshoot this. I would prefer to stick with a Lollipop ROM for now.
The CM d2att wikki page does say that since CM11, we should be using the d2lte version for this phone. So should I be installing the d2lte ROM instead?
Thank you
Click to expand...
Click to collapse
yes , d2lte ; is the unified version. but i am not sure if that will fix your issue ¿
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
yes , d2lte ; is the unified version. but i am not sure if that will fix your issue ¿
Click to expand...
Click to collapse
I installed cm-11-20141112-SNAPSHOT-M12-d2lte and unfortunately you were right. I still can't connect to WIND.
I have another fully stock S3 and I ran the Samsung Phone Info app on both to compare. Under the Firmware tab, the PDA version and CSC version is empty on the phone running CM11. Please see screenshots attached which shows this.
Also, I ran the SIM Toolkit app, tapped Manager Services and it gave me a ME returned a temporary error.
Any help would be greatly appreciated to troubleshoot this. To me it does not make any sense that on a unlocked phone, with stock or custom ROM, Telus (this phone was locked to Telus originally) connects just fine. With stock ROM, I can connect to WIND and Rogers but cannot connect to either when running a custom ROM
aaaaaahhhh !!!! @audit13 , hhhhheeeellllpppp !! (please) :what:
"all i can really do , is stay out of my own way and let the will of heaven be done"
The case is missing because there is no carrier customization on a custom rom.
It was my understanding that wind uses aws which the s3 does not natively support although there are hacks to enable these frequencies.
I am not sure how it could connect to wind on a stock rom.
audit13 said:
The case is missing because there is no carrier customization on a custom rom.
It was my understanding that wind uses aws which the s3 does not natively support although there are hacks to enable these frequencies.
I am not sure how it could connect to wind on a stock rom.
Click to expand...
Click to collapse
Hello Mr audit13! It's not just that I can't connect to WIND when runnning CM11, I also can't connect to Rogers. Does that still mean there is a frequency issue?
Edit: Looking at WINDs website: (http://www.windmobile.ca/my-wind/faq/devices)
"The WIND Mobile network uses a frequency called AWS, with bands 1700/2100 MHz.(Phones compatible with the U.S. T-Mobile network often work with WIND)"
When you load cm11 or cm12, does your phone show the correct imei?
Which stock rom will connect to wind and Rogers?
Which baseband are you using with cm11 and cm12?
Crazy autocorrect on my iPad changed csc to case
autocorrect OFF. lol. ty for coming to help. :thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
I just did a sanity check. Installed stock ROM and put the WIND SIM in it. It wouldn't connect automatically so I searched for network and it does not show WIND in that list. It only shows WIND Away which is Rogers or Telus I think.
@audit13, you were correct. This phone will not connect to WIND.
I guess I'll just buy a new phone. Nexus 6, here I come!
Anyone in the market for 2 S3's? One is unlocked.
The i747m can connect to wind with a software hack; however, the hack must be applied every time you reboot the phone.
How much for the s3? It's still a great phone.
audit13 said:
The i747m can connect to wind with a software hack; however, the hack must be applied every time you reboot the phone.
Click to expand...
Click to collapse
Ah, that's too much work.
How much for the s3? It's still a great phone.
Click to expand...
Click to collapse
I see a couple of S3 on sale on Kijiji for 180. Both phones are in pretty good condition. So I am hoping 180 for the unlocked and 160 for the locked one.
Just wanted to let you know that I bought a refurb s3 from koodo for 90 and a refurb note 2 for 180 from koodo. Both come with a 1 year Samsung warranty. They both looked new. You can't find the phones on their website, you need to call the store and ask for stock. I got these phones with no contract, unlocked them via code, and are being used on Rogers and bell.
Oh, hmm. Well, I guess I will try my luck on Kjiji.
Thanks for all your help.
I've checked out kijiji and craigslist and the prices are similar to your asking price. Many people don't know that Koodo sells refurb phones and it was just a matter if luck for me when I got the phones. They weren't even for me! I've been using an old HTC One X from Rogers for the past 8 months
After reading news that Factory Reset leaves most of the data on the phone (research done at Cambridge University), I am very very hesitant to sell my phones now.
ohTwadi said:
After reading news that Factory Reset leaves most of the data on the phone (research done at Cambridge University), I am very very hesitant to sell my phones now.
Click to expand...
Click to collapse
That only applies to the ROMs up to 4.3. Why not just flash 4.4.2 a few times, encrypt, decrypt, re-flash? I'm not positive these steps will make it better but it's the only thing I know of.