Develop Bugs

Failed Rom Radio Upgrade

Desperately need help here! Tried to upgrade my ROM/Radio etc etc. It seems to have failed because i can't get the Universal to turn on now! Soft reset, Hard reset both have the same effect - basically the screen simply turns a horrible mix of green and red pixels. The unit freezes. Can't do a THING with it! HELP ME PLEASE!

I tried to upgrade my Qtek 9000 with last ROM and now I cant come over ALIGN SCREEN.It says align screen all the time.I didnt backup my old ROM.
Does anyone know, what to do?

Device unresponsive no matter what rom?

HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks

I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit

Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks

Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate

I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion

flash YUE back via SD card flashing

I already tried that, flashes fine, but becomes unresponsive soon after

have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta

A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now

What's up if you remove your MicroSD card ?

That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.

Rebooted Touch Diamond and the circle LED was lit up solid. Any ideas?

Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.

Problem with booting some ROMs

Does anyone else have a problem whereby on their Desire's screen will appear lines and the pixels will all turn multicoloured somehow, and then it will come back? I'm having this with a MIUI ROM right now, and after it goes away, I have to wait for ages and then it gets to some sort of loading screen before rebooting. This repeats, even though I've tried everything like clearing user settings etc. My phone is rooted and S-OFF, and I'm using Clockwork 2.5.0.7. It's AMOLED (I never had this problem on my SLCD before Three replaced it with an AMOLED just to piss me off...)
Edit: This has also happened on other ROMS including but not limited to Cyanogen. As long as my phone boots, there is nothing wrong with it...

I have no idea if i have the same problem as you but when i install cyanogen 6.2 RC1 and bootup the phone, i get the htc logo and it fades away in a weird way. Then after that a few dozen colored vertical stripes appear .... its like the screen is broken. Then the phone reboots and is stuck at the htc logo.
I have no problems with cyanogenmod 6.02 (stable)
Any ideas. Its a desire slcd rooted with unrevoked and clockwork. Could it have to do with the radiorom? According to the cyanogen wiki my rom version is the most recent but i doubt that. Its still the stock radiorom but a recent one.
Sent from my HTC Desire using XDA App

arnev said:
I have no idea if i have the same problem as you but when i install cyanogen 6.2 RC1 and bootup the phone, i get the htc logo and it fades away in a weird way. Then after that a few dozen colored vertical stripes appear .... its like the screen is broken. Then the phone reboots and is stuck at the htc logo.
I have no problems with cyanogenmod 6.02 (stable)
Any ideas. Its a desire slcd rooted with unrevoked and clockwork. Could it have to do with the radiorom? According to the cyanogen wiki my rom version is the most recent but i doubt that. Its still the stock radiorom but a recent one.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes, I got exactly the same thing with Cyanogen. I'll try installing a different radio version when I get home and report back.

unnddd said:
Yes, I got exactly the same thing with Cyanogen. I'll try installing a different radio version when I get home and report back.
Click to expand...
Click to collapse
Well I've now tried a number of radios but none of them have helped... Is your phone S-OFF? Is it from Three UK? Also interesting is the fact that it eventually boots but comes up with 'process system is not responding', and after waiting a bit it just reboots itself, and repeats the whole process...

[Q] C1905 - Touch screen not respond after flashing custom ROM

I have discovered strange issue with my Xperia M (C1905).
I'm basically using stock ROM, but I wanted to flash other custom ROM. Flashing process always goes fine, without errors, but after rebooting with new ROM the touch screen is not responding at all (side buttons works fine).
I have tried to flash different ROMs (CM12, CM11, CM12.1, AOSP, ArchiDroid) and the results were exactly the same - phone boots up, but touch screen is not responding. I have flashed them using CWM and CyanogenMod Recovery. I haven't used TWRP, because the touch screen doesn't respond here either.
Phone is rooted, and bootloader is unlocked, I have flashed before different stock ROMs (15.4.A.1.9, 15.4.A.0.23), wiped data, cache and factory reset the phone, mainly followed all possible flashing tutorials.
When I was thinking what can be the reason of the behavior I think it could be due to this I have replaced broken digitizer couple of months ago. Seller claimed it was original Sony digitizer, but I cannot be sure of this.
I would really appreciate any help or suggestions, maybe I am doing something wrong?