If you search for "galaxy s3 grid armband" on eBay, you'll find it. I bought from "wanghaostore".
It's also listed under other names, you can search further under "galaxy s3 sport armband" once you know what the auction picture looks like.
The armband came a bit folded in half probably from shipping, I need to set something heavy on it to flatten it out....
Fit
The armband fits really good. All the buttons are accessible. You can change the volume while running, as well as easily access the ports and power button.
The armband also works with cases! As you can see in the last picture I have my diztronic TPU case on it.
Feel
The material is a little scratchy, but overall it's comfortable and will stay put on the arm. It's a tech-fabric material with what looks like a nylon weave "cushion" underneath.
It should be pretty sweat-resistant, the material where the phone sits is neoprene, so it shouldn't absorb sweat or scratch the phone.
The strap length is a bit on the short side. It fits for me, I have 13-14 inch biceps. It could probably go up to 19-20 inch biceps, but beyond that you might need a different holster. Smallest it could go is probably around 11-12 inches.
Usability
I always have problems with the plastic screen protector on armbands bubbling up. With this one the case stretches it, so I can easily use the phone while its on my arm. I don't anticipate issues being able to slide or use Pandora.
The main benefit of the armband is also its biggest detriment: All the ports are exposed. Don't plan on using it in the rain. But for a sunny day, or indoors at the gym, it's a great holder.
Price - $1.99 + $1.50 shipping on eBay.
So buy 5, so you can replace it if it becomes stanky from sweat.
Good review. Do you think it will fit those with extended batteries with a tpu case?
Sent from my GT-I9300 using xda premium
Maybe. Its thick enough, there's plenty of vertical space.
My friends phone with incipio silicrylic case fits. Bit tight (width-wise, height has plenty of room),
May even fit with otter box.
Sent from my SPH-L710 using Tapatalk 2
Thanks. Don't mind taking a risk since the price is good
Sent from my GT-I9300 using xda premium
RavinShubh said:
Thanks. Don't mind taking a risk since the price is good
Click to expand...
Click to collapse
Ah, yeah, same here. I was pleasantly surprised, I would say it is the best armband on the market right now.
It may not work with extended battery + TPU case (depends how thick), but I'm fairly confident in saying it'll at least work with the extended battery.
There are a lot of complaints about the Belkin armbands absorbing water/sweat.
I had the iArmbands style for my last phone, they suck.
I might get one of the iGadgitz or CrazyOnDigital type for rain, but this will be my primary-use one, since I don't have to take off the case.
Looks like it's $4. shipped now.
http://www.ebay.com/itm/Grid-Armban...ccessories&hash=item3378fcaad3#ht_6128wt_1163
CZ Eddie said:
Looks like it's $4. shipped now.
http://www.ebay.com/itm/Grid-Armban...ccessories&hash=item3378fcaad3#ht_6128wt_1163
Click to expand...
Click to collapse
There's a few that are at the cheaper price.
Gray (this is the link I bought):
http://www.ebay.com/itm/Arm-Band-Ca...605370?pt=PDA_Accessories&hash=item4d031b57ba
Other colors (lime green/blue/red/pink) (searching his store):
http://stores.ebay.com/wanghaostore/_i.html?_nkw=galaxy+s3&submit=Search&_sid=878187300
Nice review !
Is it possible you could post a picture with the arm holster on, just to see how it fits ?
And how long was the shipping time ? From where to where ?
ShironLive said:
Nice review !
Is it possible you could post a picture with the arm holster on, just to see how it fits ?
And how long was the shipping time ? From where to where ?
Click to expand...
Click to collapse
Shipped from hong kong. I bought it on the 24th (weekend), shipped on the 28th, in america on the 30th, and delivered on august 3rd (midwest).
I'll try to get a picture with it on my arm.
I was thinking of actually making a custom armband, any thoughts? I've seen people do it for their iphones
Intercrew said:
I was thinking of actually making a custom armband, any thoughts? I've seen people do it for their iphones
Click to expand...
Click to collapse
I've thought of this too. I'm intrigued by the Tetrax and whether it would be stable (mostly because I've been thinking about getting one for my car).
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
It'd be interesting to get one of the FIX connectors and epoxy it to some sort of strap, like the TuneBand.
Or you could get a cheap case and make your own TuneBand
Is this the same armband? http://www.amazon.com/JKase-Armband...&keywords=armband+galaxy+s3#productPromotions
Much rather do $10 for 2 day delivery then have to wait. But the bigger question is, do you think SGP Neo Hybrid case fit (well that is, not ridiculously tight!)? http://www.amazon.com/SPIGEN-SGP-Protection-Protector-International/dp/B008MEIQHA
xiaosongshu said:
Is this the same armband? http://www.amazon.com/JKase-Armband...&keywords=armband+galaxy+s3#productPromotions
Click to expand...
Click to collapse
Wrong button, enjoy the thanks.
NO. That is not the right one.
I actually bought that one through eBay, it sucks. The one I got, the phone doesn't fit in it (not even without the case, it kept pressing the volume button). And the strap is huge, the arm band wouldn't fit on my arm. I ended up throwing it away.
As far as the arm band goes, it should easily fit with the SGP Neo. The diztronic, despite being thin on the back, is quite thick around the sides.
Related
Looks like the iPad case, but leather and only $17.99 with free shipping on eBay.
http://cgi.ebay.com/Samsung-Galaxy-Tab-10-1-GT-P7510-Leather-Case-Cover-BLK-/190542584350?pt=PDA_Accessories&hash=item2c5d391a1e
Anyone try this one yet? I'm going to buy one and I'll post a review once I get it.
A few pics:
I just ordered one as well. The pictures look good. We'll see what it's like when it arrives.
Note: the price is now $18.99 with free shipping.
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
PhyerFly said:
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
Click to expand...
Click to collapse
Nice, thank you so much for the amazing pictures.
So when it's shut down it doesn't open up by mistake? The magnets attach to the tablet itself?
It's certainly the best price for this type of case.... now I am torn between this one and the official book sleeve case (which is $ 60!)
rubi76 said:
So when it's shut down it doesn't open up by mistake? The magnets attach to the tablet itself?
Click to expand...
Click to collapse
No, when it's closed it stays shut and is very solid. The magnets are in the edges of the flap that closes and in the part that covers the bezel of the tablet (right where the front-facing camera is).
Because of how sleek and light the GT10.1 is I didn't want a case that would add too much bulk like the ones I've seen for the XOOM. As long as it holds together this case fits the bill perfectly and I don't see myself replacing it
Nice find! Wish I would of read this thread earlier. For the $17.99 price with free shipping why not? Personally I'd raise that price if I were them!
This is actually Polyurethane (PU) and not leather. But I'm sure you all assumed that given the price
edit: Apparently you can get these in 5 different colors if your order directly from China: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220798495079
OneStepAhead said:
Nice find! Wish I would of read this thread earlier. For the $17.99 price with free shipping why not? Personally I'd raise that price if I were them!
This is actually Polyurethane (PU) and not leather. But I'm sure you all assumed that given the price
edit: Apparently you can get these in 5 different colors if your order directly from China: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220798495079
Click to expand...
Click to collapse
It's the "PU" that scares me. I got a "PU" case for my Nook Color and it stunk so bad I had to leave it outside. P.U.! It smelled like dead meat.
MisterEdF said:
It's the "PU" that scares me. I got a "PU" case for my Nook Color and it stunk so bad I had to leave it outside. P.U.! It smelled like dead meat.
Click to expand...
Click to collapse
Ive had that happen before as well with PU
Sent from my GT-P7510 using XDA Premium App
I've been using mine for a week now and I'm quite happy with it, especially for the price I paid.
When using it as a stand, it's not the most stable unless you arrange it so that you're viewing it "upside-down" but it'd be fine as long as it's on a stable surface.
Weight?
Do you have the specs on the weight of this case? I want one that is *really* *really* light to go with the low weight of the gtab
This a nice find. I will definitely keep this in mind.
Sent from my GT-P7510 using Tapatalk
I really like this case.
I currently have the belkin slim folio case but I find very hard to insert and take the tab out because the case is very tight and its material generates too much friction.
Is it hard to insert and take the tab out from this case?
Thanks!
Cheaper case Item number: 150622771410 http://cgi.ebay.co.uk/Black-Leather...K_iPad_Tablet_Accessories&hash=item2311d118d2
ZENUS LEATHER BAND CASE Item number: 200621541201 http://cgi.ebay.co.uk/ZENUS-LEATHER...t=LH_DefaultDomain_0&var=&hash=item746b8352ce
Expensive case Item number: 310324624222 http://cgi.ebay.co.uk/Leather-Case-...K_iPad_Tablet_Accessories&hash=item4840c9fb5e
PhyerFly said:
Looks like the iPad case, but leather and only $17.99 with free shipping on eBay.
http://cgi.ebay.com/Samsung-Galaxy-Tab-10-1-GT-P7510-Leather-Case-Cover-BLK-/190542584350?pt=PDA_Accessories&hash=item2c5d391a1e
Anyone try this one yet? I'm going to buy one and I'll post a review once I get it.
Click to expand...
Click to collapse
This looks like same one only on Amazon.co.uk:
http://www.amazon.co.uk/SAMSUNG-GAL...VY/ref=sr_1_15?ie=UTF8&qid=1309113518&sr=8-15
PhyerFly said:
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
Click to expand...
Click to collapse
I just bought one based on your review. Thanks for posting this. It seems like the best case for the money so far. How many days did it take from ordering till you received it? I'm hoping to have it before camping this weekend.
Also, it has to be unfolded to be charged correct?
Hm... this looks like a nice case for carrying the tab around. I actually got a soft gel (TPU) case just to be able to throw the tablet around at home since I already have a screen protector. And I like how it's texturized on the sides for better grip.
http://cgi.ebay.com/ws/eBayISAPI.dl...94520&ssPageName=STRK:MEWNX:IT#ht_2922wt_1158
Will keep this case cover in mind though. Looks nice enough.
Any good recommendations? I'm not a big fan of magnet on cases and seems most reasonably priced (<$30) folio style cases have magnet strip.
Sent from my Inspire 4G using XDA Premium App
Can't post link as of yet, but go to Amazon and type in "Acase Samsung 10.1 case". Its full name is "Acase Samsung GALAXY Tab 10.1 High Quality Premium Slim Leather Case Folio"
This is the case I ordered. It's got good customer reviews. It's non magnet and around the price point you mentioned.
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Roocase ultra slim
Roocase Ultra Slim
Got this instead from pcmicrostore.com. Amazon cells it too but pcmicro has 20% off tablet accessory code 20OFFTABLET so turned out to be cheaper. Also got a screen protector there. I prefer that case over Acase for a little more protection. Also it's genuine leather. $26 shipped.
Thanks for the heads up on the coupon code. I had been on the fence on a case and this sealed the deal for me. You just saved me $8. Thanks!
frenchie746 said:
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Click to expand...
Click to collapse
I got one of these and sent it back. Aside from the horrible smell of the material they use to make it the stand function was very limited and you have to unsnap the bottom clips that hold the tab to the case to fold it back to stand it up. Eventually that will probably scratch the paint off the corners of the tab. It did fit well.
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
haas599 said:
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
Click to expand...
Click to collapse
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
The case fits perfectly and the material is very nice. The only minor grip I have is that the lowest angle is a little too steep for a comfortable typing. It does work well on a table, but not so well lying down in bed. The ipad 2 version of the exact same case has a bend in the front side which allows an angle for more comfortable typing. I don't know why Acase got rid of that position for this version, but I'm sure they have their reasons.
zariman said:
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
Click to expand...
Click to collapse
Mine smelled like a dead meat. The whole room where I opened it smelled. My wife thought the cat died. If that's what leather is supposed to smell like I'm gonna sell my truck, couch and the cow grazing in my garage. Obviously I got a bad one. It also felt more like vinyl than fine corinthian leather.
As for the bottom clips (or whatever they were) folding back a third of the case to stand it up wasn't my idea of good design.
You are of course entitled to your opinion. My opinion is the "official" Samsung case, for the few bucks extra, is much better designed, better fitted and less odoriferous.
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
haas599 said:
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
Click to expand...
Click to collapse
Well, after spending $600 on the tablet, I guess $22 more seemed to me as "just a little." As far as how my case "smelt" I'm not concerned whether you believe it or not. Since Amazon got it back it's now their concern.
I have a diztonic case for my nexus. Is there a belt pouch compatible with the phone with the case on it?
Sent from my Galaxy Nexus using Tapatalk
It will fit into the Maxpedition 5" Clip-On Phone / Radio Holster. It is a bit pricey and a bit rugged (so not so good with a smart suit or tux!) but it will hold your phone securely.
Junk the metal belt clip because it can pull out. Thread your belt through the 3 Molle straps horizontally or make a belt loop from a Maxpedition 3" Tactie (Google instructions on using Tacties) or a Malice clip. I use this holster for my Galaxy S2 with a Tactie and it's totally secure.
One point to consider is that the corners of the phone are exposed but I find that the phone cover protects those.
Happy_Jack said:
It will fit into the Maxpedition 5" Clip-On Phone / Radio Holster. It is a bit pricey and a bit rugged (so not so good with a smart suit or tux!) but it will hold your phone securely.
Click to expand...
Click to collapse
I was looking to buy one of these for my Lunada but wasn't sure if it would fit. Thanks for the info! Ordering it now.
subtex said:
I was looking to buy one of these for my Lunada but wasn't sure if it would fit. Thanks for the info! Ordering it now.
Click to expand...
Click to collapse
Happy to help. Bear in mind that the 5" holster is really 5" tall and a Nexus is 5.33", so you'll have a little bit of phone protruding. Personally I think that's perfectly fine and gives you something to get hold of to pull the phone out, but I should probably have made that clear. The retaining strap is plenty long enough to accommodate the extra length.
I bought 2 of these for my SGS2 (black and khaki) and I love them. They're totally secure so long as you junk that crappy metal belt clip.
Please post back your opinion once you've tried yours.
Just received mine last week. It's pretty much exactly what I was looking for. Unfortunately I didn't have any 5" tac ties left to get it on my bag. Ordered those, should have them today sometime.
Overall I don't really have anything to complain about other than wishing I had a way for molle to be both secure and also easy to remove when I don't need it
subtex said:
Just received mine last week. It's pretty much exactly what I was looking for. Unfortunately I didn't have any 5" tac ties left to get it on my bag. Ordered those, should have them today sometime.
Click to expand...
Click to collapse
I believe you only need a 3" Tactie.
subtex said:
Overall I don't really have anything to complain about other than wishing I had a way for molle to be both secure and also easy to remove when I don't need it
Click to expand...
Click to collapse
Have you tried Malice clips? They're easier to thread and to undo providing you have a suitable tool handy. I personally don't like them because I find them big, clumsy and inflexible. They make horrid belt loops but they do hold stuff to a pack more tightly than a Tactie and won't ever come undone by accident.
If I don't mind something swinging about a bit I just fasten it with a carabiner. That's the ultimate quick-release Molle connector. :laugh:
Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks
Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!
You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too
Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap
How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.
I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.
ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.
is it easy to take it in and out of your pant pocket
denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:
dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.
Anyone bought this?
It really look nice ...
http://www.amazon.co.uk/exec/obidos/ASIN/B00EF83LZO
If yes, how is the quality?
Is it sturdy and thin?
I doubt due to it's cheap price to be honest ...
Looks pretty similar to the moko ultra slim.
Sent from my Nexus 7 using xda app-developers app
muyoso said:
Looks pretty similar to the moko ultra slim.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
IDENTICAL
I just got my moko. Looks identical. It is indeed thin. One thing I don't like is the front cover is so thin it is almost sharp around the edges. So when you hold it with one hand, pinky wrapped around the bottom, it kind of digs into your finger.
Looks nice but I'm not gonna be keeping it on. I have 4 more to choose from. So far my favorite is the poetic case.
Sent from my SCH-I535 using Tapatalk 4
This looks nice and cheaper than Moko.
So is anyone here using it to provide some feedback?
Thanks!
Would be keen to know if nay one has this yet, considerably cheaper than the Moko and looks identical.
It looks exactly identical to the moko ultra slim case that I have on my n7. It is probably just a rebranded moko.
Purchased case
Taking into account the shipping on the Moko its more or less three times cheaper, so I have bought the bullet so to speak.
I will endeavour to post my thoughts on it when it arrives. Delivery pending I should have the tablet and case by the 2nd Sept
Stalkalainen said:
Taking into account the shipping on the Moko its more or less three times cheaper, so I have bought the bullet so to speak.
I will endeavour to post my thoughts on it when it arrives. Delivery pending I should have the tablet and case by the 2nd Sept
Click to expand...
Click to collapse
Thanks Stalkalainen, I will get it myself, but my Nexus 7 is still to be sent so I am waiting in case I find any kind of review, I haven't seen a single one yet anywhere. Your feedback will be great!
Ok so the case is here initial impressions are good, case feels nice smart cover works well.
I will take some pictures and try them get them online today.
Pictures
Here are a few amateur snaps I took from my S3 (CM camera). The case came with a screen protector in which you can see I have failed miserably at applying, a stylus which I will never use and a small lint free cleaning cloth.
The magnet seems solid and when I hold the tablet glass side down the front flap stays put.
Any questions or photo requests let me know.
I'll post an update after I have used it for a few days.
Got mine today, not bad for 99p :laugh:
I bought this cover today ( 9.95 € + 3€ shipping) from amazon !
Looks good!
Won't a magnet damage the screen?
Not bad for £2.90 from Amazon including shipping. It is slim and light. :laugh:
It actually fits nicely into the Mivizu Neoprene sleeve.
The magnet works but would have been better if it is a clasp like the Blurex.
I feel the cover might move (if not inside the sleeve) when it is thrown inside a backpack and the backpack shifts.
3473 said:
Got mine today, not bad for 99p :laugh:
Click to expand...
Click to collapse
Ysabelkid said:
Not bad for £2.90 from Amazon including shipping. It is slim and light. :laugh:
It actually fits nicely into the Mivizu Neoprene sleeve.
The magnet works but would have been better if it is a clasp like the Blurex.
I feel the cover might move (if not inside the sleeve) when it is thrown inside a backpack and the backpack shifts.
Click to expand...
Click to collapse
Where you guys get it for so cheap?
I've ordered mine from eBay for 18€. Can't wait to get my hands on it.
I'm also doubtful about the magnet closure, I've never used any magnetic folder, so will you assure me it won't damage my precious Nexus 7?
The price has gone up to £9.90 -
http://www.amazon.co.uk/dp/B00EF83LZO/ref=pe_385721_37038051_pe_217191_31005151_3p_M3T1_dp_1
As I said before I was worried about the magnetic case closure.
It was really hard to remove the Nexus 7 from the case.
I received my Blurex case via my friend in US. Its heavier than the InventCase and the clasp at the side make it feel secure. Fits nicely into the Mivizu Neoprene sleeve as well.
Mine arrived today, payed £1.99 + £2.75 shipping. Some pics https://plus.google.com/photos/1068...ms/5919832529468769553?authkey=CPefjKjstZjqTQ
The only difference from the MoKo one is the texture and I'd actually say that this (the InventCase) looks more premium than fake leather.
Edit: Spoiler
Fore more check album
Stalkalainen said:
Here are a few amateur snaps I took from my S3 (CM camera). The case came with a screen protector in which you can see I have failed miserably at applying, a stylus which I will never use and a small lint free cleaning cloth.
The magnet seems solid and when I hold the tablet glass side down the front flap stays put.
Any questions or photo requests let me know.
I'll post an update after I have used it for a few days.
Click to expand...
Click to collapse
Gordon Ramsey says your screen protector has so many f***ing bubbles it looks like Ted kennedy tried to drown it.