Develop Bugs

[Q] ARHD 5.2.2 Hang what am I doing wrong?

I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.

happyshirt said:
I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.
Click to expand...
Click to collapse
Did u check the md5 sum and make sure ur download is good first? I assume that u r rooted correctly right? Make sure u r not trying to flash it through cwm. And make sure ur battery isn't low or keep it plugged in on charge only

U r not rebooting after super wipe r u? As soon as wipe is done it tells u to install Rom

Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.

happyshirt said:
Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.
Click to expand...
Click to collapse
I would trash that download and download a new zip then try it again. Sounds like u r doing it right

hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086

happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
that sucks man. it should be easy

happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
what recovery r u using?

try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom

jess086 said:
try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom
Click to expand...
Click to collapse
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.

happyshirt said:
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.
Click to expand...
Click to collapse
Don't worry about the old one. Get the new ext4 recovery out of the dev. Section. Will be one of the top threads. Flash it. Then boot to recovery and go to where it says wipe and wipe the catch, dev catch, and the factory wipe u already did. Then flash the wipe download for ext4 when its done it will say u can now flash the arhd Rom so go to install fro SD card and fond Rom zip and flash it then reboot. U will be good hopefully. Keep me posted

Do you mean this one? Is it different from the Super Wipe from the ARHD pg?
ClockWorkMod 2 & 3 - ( Edify Script )
FULL_WIPE_1.5_EXT4_
This patch can be applied prior to flashing the ROM, please note, this zip will wipe your device and format all partitions to EXT4.

jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.

happyshirt said:
jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.
Click to expand...
Click to collapse
thx for letting me know, wish i could of helped more bro

[Q] Help me please :) No Roms are Booting :/

Quick Stats:
R800i Unlocked
Carrier: 2degrees (NZ)
Bootloader unlocked
I'm wondering if anyone can help, I wanted to get a ICS rom of some sort, so I unlocked the bootloader and put clockwork mod on there. I installed the CM9 Release Candidate for Xperia Play, and it will then turn on with the boot animation, but it keeps playing it for nearly 20 minutes so far... Can anyone help me fix this?
Thanks in advance :fingers-crossed:

You will need to flash the kernel too. Instructions are probably in the CM9 thread.

ridder215215 said:
You will need to flash the kernel too. Instructions are probably in the CM9 thread.
Click to expand...
Click to collapse
Any good kernels you would reccomend?

JayBeeNZ said:
Any good kernels you would reccomend?
Click to expand...
Click to collapse
open the cm9 zip and there you shall see a boot.img
flash that i am led to believe

iRhyiku said:
open the cm9 zip and there you shall see a boot.img
flash that i am led to believe
Click to expand...
Click to collapse
Yeah I followed the instructions on the wiki, Clockworkmod seems to be running okay, its just when it boots to start cm9, the boot animation for cm9 is taking forever.

Is it the freexperia logo?

iRhyiku said:
Is it the freexperia logo?
Click to expand...
Click to collapse
Yeah that comes up, then the CM9 boot starts... and never ends.

I have the exact same problem (except on CM7)
Sorry I can't help you

Before you flashed the zip did you do a factory reset from CWM and wipe dalvik cache?

fareeed said:
Before you flashed the zip did you do a factory reset from CWM and wipe dalvik cache?
Click to expand...
Click to collapse
wipe dalvik cache? i just pressed wipe cache... sorry im a bit of a n00b at this stuff. a factory reset from cwm... how?

Thanks so much!
It worked! Thank you SO MUCH! I'ts nearly 1am over here in NZ, so its time for sleep!

JayBeeNZ said:
It worked! Thank you SO MUCH! I'ts nearly 1am over here in NZ, so its time for sleep!
Click to expand...
Click to collapse
It's fine, glad I could help

[Q] How to uninstall cyanogenmod 10 but keep the root? im new

hello everyone this is my first time asking a question on here so forgive if i got this in the wrong section.
i was wondering if you all could tell me how to "uninstall" cyanogenmod 10 off my samsung epic, but without unrooting.
i like cyanogenmod but i have to get it off because i cant change phone lines within my account because in order to put service back on my phone sprint wants me to dial ##somenumbers# and a menu is suppose to pop up but it doesnt and i think i read somewhere around here that you dial those "codes" in the dialer because they wont work.
soo I followed qbkings method to root my phone. youtube title = how to root the samsung epic on FC09
then i installed cyanogenmod10 using his method again
I did this to two samsung epics since i have two samsung epics at my disposal and i would follow qbkings method of unrooting
but i tried that on of the epics but odin failed and it got completly bricked and I mean hard bricked. so i am extremly fearful of even attempting qbkings unrooting method since i completly bricked one of the epics trying to unroot it.
and i was thinking that since i followed qbkings method i just need to go to recovery mode after turning off the phone and then clear everything data and cache.
and then do the install zip from sd card and just install the deodexedFC09 zip file that i previously put on the card when i was rooting my phone.
and then that would be it but i am extremly fearful of messing with the phone like that because i really dont want to brick my phone so i come to you all today for your help on this because i am new to rooting and flashing roms on my phone so i didnt really know whereelse to ask.
Ive tried looking for help on the forums and the web but i did not find nothing so i just rather ask then ...

You can buy a jig for like $1-2 to jump the bricked one back in dl mode then flash full stock, as for the other, there is a boot from sdcard rom that will enable you to activate your phone without uninstalling cm10
Sent from my SPH-D700 using Tapatalk 2

phonehunter59 said:
You can buy a jig for like $1-2 to jump the bricked one back in dl mode then flash full stock, as for the other, there is a boot from sdcard rom that will enable you to activate your phone without uninstalling cm10
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Also, you can just flash a tw mtd rom to get those dialer codes woring... just flash TPR (the peoples rom) after backing up cm10... flash tpr, boot it, call sprint, do your thing, restore backup of cm10... all done...

alright ill try that but can you tell how to flash the peoples rom? or anyother rom for that matter.
i assume that i boot into recovery mode and clear everything and install from sdcard and look for the zip of the rom? im not sure if thats how to do it? if not can you explain to me how?

nike0518 said:
alright ill try that but can you tell how to flash the peoples rom? or anyother rom for that matter.
i assume that i boot into recovery mode and clear everything and install from sdcard and look for the zip of the rom? im not sure if thats how to do it? if not can you explain to me how?
Click to expand...
Click to collapse
That's exactly right. Remember to wipe data in cwm. Use titanium backup to back up any 3rd party apps and data you need first.
XDA Moderator

do you have a link to where i can download the rom?

All ROMs are in the development subforum:
http://forum.xda-developers.com/showthread.php?p=24594038
XDA Moderator

alright thanks man hopefully everything goes well.
i download the mtd one right ? since i have cyanogenmod 10
alright just to be clear
1st i download the peoples rom on my pc and transfer it to the sd card.
then 2nd I boot into recovery and click on backup ? correct
3rd after that is done i wipe data and factory reset?
4th I wipe cache partition
5th go to advanced menu and wipe dalvik cache?
6th install zip from sd card and look for the peoples rom and install that right?
this would be how to install the peoples rom if i have cyanogenmod 10?

nike0518 said:
alright thanks man hopefully everything goes well.
i download the mtd one right ? since i have cyanogenmod 10
alright just to be clear
1st i download the peoples rom on my pc and transfer it to the sd card.
then 2nd I boot into recovery and click on backup ? correct
3rd after that is done i wipe data and factory reset?
4th I wipe cache partition
5th go to advanced menu and wipe dalvik cache?
6th install zip from sd card and look for the peoples rom and install that right?
this would be how to install the peoples rom if i have cyanogenmod 10?
Click to expand...
Click to collapse
Exactly correct...

thanks everyone it was very successful flashing it and I am done. thanks very much for guiding me through this.
does anyone one know a dialer code from sprint so i can try it and see if it works?

nike0518 said:
thanks everyone it was very successful flashing it and I am done. thanks very much for guiding me through this.
does anyone one know a dialer code from sprint so i can try it and see if it works?
Click to expand...
Click to collapse
##8778# or ##data# (don't know the button sequence for data) hope it helps..

alright the menus pop up like they are suppose too.
im going to call sprint later today and try to activate a number on my phone.
do i do the exact same method to go back to cm10? after i talk to sprint

nike0518 said:
alright the menus pop up like they are suppose too.
Click to expand...
Click to collapse
Awesome your good to go... call sprint and set things up and then you can restore your backup of cm10 and all will be riight with the world...

do i flash back to cm10 the same way i just flashed the peoples rom??

nike0518 said:
do i flash back to cm10 the same way i just flashed the peoples rom??
Click to expand...
Click to collapse
You can, but its probably easier to just restore the back up you made in cwm before flashing the peoples rom...

how would i restore it ? i did make a backup of cm10..

nike0518 said:
how would i restore it ? i did make a backup of cm10..
Click to expand...
Click to collapse
Boot into recovery, go to backup and restore, press restore, press on the backup you just made (the name will be the date). And press restorre... once you boot into recovery, its pretty self-explanitory from there on out...

alright man thanks alot to all of yall who replied i really appreciated it. i will post back on here on the status of me with sprint and flashing cm10 back.

alright i tried to activate my phone online with sprint but it wouldnt work so i called customer service and phone is up and running with service.
once again thank you very much everyone

nike0518 said:
thanks everyone it was very successful flashing it and I am done. thanks very much for guiding me through this.
does anyone one know a dialer code from sprint so i can try it and see if it works?
Click to expand...
Click to collapse
I had this issue back when I had my original Evo. I just flashed it back to a stock rooted Sense ROM and it worked. If it is a stock TW ROM (The Peoples Rom is), then all Sprint codes will work.

[Q] Problem with JellyTime

Hello,
HTC Desire HD with ClockWorkMOD and JellyTime
Sometimes the phone go in black screen. When I reboot the phone, after the JellyTime animation I've got a black screen. I need to remove the battery and connect it to the PC for have the ClockWorkMOD.
But when I'm on this menu I don't know what I need to do !??
I use wipe DalvikCache and wipe cache partition. And I reboot but nothing. Now I have an Android menu with "Lauching application", infinite loading.
I'm very frustrate because I already erase all data five times before and it work. But now I wan't to find a real solution !
Sorry for my English.
I already post this heron GoogleCode
But I'm desesperate, thank you in advance

Dlazzy said:
Hello,
HTC Desire HD with ClockWorkMOD and JellyTime
Sometimes the phone go in black screen. When I reboot the phone, after the JellyTime animation I've got a black screen. I need to remove the battery and connect it to the PC for have the ClockWorkMOD.
But when I'm on this menu I don't know what I need to do !??
I use wipe DalvikCache and wipe cache partition. And I reboot but nothing. Now I have an Android menu with "Lauching application", infinite loading.
I'm very frustrate because I already erase all data five times before and it work. But now I wan't to find a real solution !
Sorry for my English.
I already post this heron GoogleCode
But I'm desesperate, thank you in advance
Click to expand...
Click to collapse
Have you tried redownloading the rom? Also, which version you using?

Re
Aiko0923 said:
Have you tried redownloading the rom? Also, which version you using?
Click to expand...
Click to collapse
I use this rom : cm-4.3-20131012-Beta5-ace.zip
And for Gapps : gaaps-jb-20130813-signed.zip
I going to redownload the rom, but when I go on the official thread http://forum.xda-developers.com/showthread.php?t=1778202 and I chose the Beta 6, the file is not found !
Thank for your help

Re
Hello,
Up the topic.
Please help me ! He reboot today with black screen after !!!
Thank you

Give a Shot!
Dlazzy said:
Hello,
Up the topic.
Please help me ! He reboot today with black screen after !!!
Thank you
Click to expand...
Click to collapse
@Dlazzy
Try flashing ROM without the GApps,if it boots perfectly then there is issue remain gapps only!
You won't find Beta6 due to some issues download link was broken and its not available.
Make sure you're flashing correct updated GApps accodring to version of OS. I think your problem lies somewhere in rom or gapps so try with flashing some other ROM and it won't be any problem.
Good luck.

dr.patron99 said:
@Dlazzy
Try flashing ROM without the GApps,if it boots perfectly then there is issue remain gapps only!
You won't find Beta6 due to some issues download link was broken and its not available.
Make sure you're flashing correct updated GApps accodring to version of OS. I think your problem lies somewhere in rom or gapps so try with flashing some other ROM and it won't be any problem.
Good luck.
Click to expand...
Click to collapse
Hello,
I didn't want to take an other risk, I take the R11 version. But I have a problem with it, the wifi is unable in the settings !!
Thank for your help !

Ok
Dlazzy said:
Hello,
I didn't want to take an other risk, I take the R11 version. But I have a problem with it, the wifi is unable in the settings !!
Thank for your help !
Click to expand...
Click to collapse
Dude,no worries at all.
Are you S-ON? or S-OFF?
For your kind of information booting ROM without GApps won't cause you any trouble!!
Anyone here will give you only advice,do it or not to do it, It's only depends on you.
Goodluck.

dr.patron99 said:
Dude,no worries at all.
Are you S-ON? or S-OFF?
For your kind of information booting ROM without GApps won't cause you any trouble!!
Anyone here will give you only advice,do it or not to do it, It's only depends on you.
Goodluck.
Click to expand...
Click to collapse
I'm sorry but I don't know what is S-ON and S-OFF ?
THX

[PROBLEM][SOLVED!] CWM, TWRP and LEWA Recoveries not booting into system

I've been working around with my device. And created a custom ROM a while back. So I finally decided to test it and here's when the problem occured:
I was on v11 something, when I flashed CWM 6.0.28 and tested it. It booted alright, wiped things and then when I chose the option, reboot into system, it did so without any problems. Then I upgraded to v1.1.2.2 and reflashed CWM but this time the 6.0.48 version. It worked fine too. But then, when I chose to reboot into system, the screen froze. I had no choice but to pull out the battery and reboot it.
I tried and flashed Lewa Recovery as well as TWRP Recovery. Same thing happens. As soon as I choose Reboot--> System, the screen freezes.
I was hoping any of the professional devs look into this and find a cause,
FYI I'm on Null Kernel for 4.1.2, running Stock ROM with G-Apps.
Any help would be appreciated!
SOLUTION! :
Download the recovery in the attachments. It's Lewa Recovery. Flash it. It works like any other recovery.
Flash zips, create backups and when you are done, Just Click on Reboot. But DO NOT click on system. Instead choose Download. You will boot right back into system.
So no more pulling out covers. Cause it can seriously lose the cover. Enjoy devs.

all custom recovery currently got problem with freezing when choosing to reboot into system, reboot recovery or poweroff.
its a bug in the recoveries.

mdfzhi said:
all custom recovery currently got problem with freezing when choosing to reboot into system, reboot recovery or poweroff.
its a bug in the recoveries.
Click to expand...
Click to collapse
Then how do we get past it? Is there a way to reboot into system without having to pull out the battery? How do you guys do it?

no other way except pulling out battery.

mdfzhi said:
no other way except pulling out battery.
Click to expand...
Click to collapse
So, shouldn't you guys work on fixing these issues in the recovery? I'm afraid the back cover of my Nokia X would become loose.

yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.

mdfzhi said:
yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.
Click to expand...
Click to collapse
Man, why not you start cm11 for us?

mdfzhi said:
yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.
Click to expand...
Click to collapse
Yo! I found the solution. Check out the thread again.

Dom3616 said:
Yo! I found the solution. Check out the thread again.
Click to expand...
Click to collapse
dont understand

sumondhk1 said:
dont understand
Click to expand...
Click to collapse
See again.

Dom3616 said:
See again.
Click to expand...
Click to collapse
Thanks for thr solution but I am already using it and it is much better than others.
When I press reboot system, it takes sometime but after all it boots.
Now gonna try your method.

Lewa recovery can't mount usb storage. At least for me it can't.

mdfzhi said:
Lewa recovery can't mount usb storage. At least for me it can't.
Click to expand...
Click to collapse
Yes, but I copy the files before I boot the recovery.

I Would never Suggest Lewa For anyone ! It is smooth...cool .... good
But you will get bored of those frogs instead of smilies...
I Really Hated the Lewa Recovery too...
Made my Dead...In SERVICE Center gonna get it back on 13th...i'll sell it to buy XL
I Will never install Lewa on it...I Will do install TWRP On it...And thn flash dhacker29's AOSP Rom...(Altough i love S5 Minirom...but i've heard buttons and camcorder doesn't work on it...It completely Works on X....Just gonna wait Hope he fix it before 13th )

Dom3616 said:
See again.
Click to expand...
Click to collapse
i don't have any problem about booting to system with my nokia XL

Dom3616 said:
I've been working around with my device. And created a custom ROM a while back. So I finally decided to test it and here's when the problem occured:
I was on v11 something, when I flashed CWM 6.0.28 and tested it. It booted alright, wiped things and then when I chose the option, reboot into system, it did so without any problems. Then I upgraded to v1.1.2.2 and reflashed CWM but this time the 6.0.48 version. It worked fine too. But then, when I chose to reboot into system, the screen froze. I had no choice but to pull out the battery and reboot it.
I tried and flashed Lewa Recovery as well as TWRP Recovery. Same thing happens. As soon as I choose Reboot--> System, the screen freezes.
I was hoping any of the professional devs look into this and find a cause,
FYI I'm on Null Kernel for 4.1.2, running Stock ROM with G-Apps.
Any help would be appreciated!
Click to expand...
Click to collapse
I was also facing this problem. but now I am doing one thing,after flashed all I need,I clear the dalvik cache.Then click the reboot and its rebooted the system smoothly.No freez screen.Hope it will help others..
I am using CWM 6.0.28 recovery and stock rom.