[Q] Help me please :) No Roms are Booting :/ - Xperia Play Q&A, Help & Troubleshooting

Quick Stats:
R800i Unlocked
Carrier: 2degrees (NZ)
Bootloader unlocked
I'm wondering if anyone can help, I wanted to get a ICS rom of some sort, so I unlocked the bootloader and put clockwork mod on there. I installed the CM9 Release Candidate for Xperia Play, and it will then turn on with the boot animation, but it keeps playing it for nearly 20 minutes so far... Can anyone help me fix this?
Thanks in advance :fingers-crossed:

You will need to flash the kernel too. Instructions are probably in the CM9 thread.

ridder215215 said:
You will need to flash the kernel too. Instructions are probably in the CM9 thread.
Click to expand...
Click to collapse
Any good kernels you would reccomend?

JayBeeNZ said:
Any good kernels you would reccomend?
Click to expand...
Click to collapse
open the cm9 zip and there you shall see a boot.img
flash that i am led to believe

iRhyiku said:
open the cm9 zip and there you shall see a boot.img
flash that i am led to believe
Click to expand...
Click to collapse
Yeah I followed the instructions on the wiki, Clockworkmod seems to be running okay, its just when it boots to start cm9, the boot animation for cm9 is taking forever.

Is it the freexperia logo?

iRhyiku said:
Is it the freexperia logo?
Click to expand...
Click to collapse
Yeah that comes up, then the CM9 boot starts... and never ends.

I have the exact same problem (except on CM7)
Sorry I can't help you

Before you flashed the zip did you do a factory reset from CWM and wipe dalvik cache?

fareeed said:
Before you flashed the zip did you do a factory reset from CWM and wipe dalvik cache?
Click to expand...
Click to collapse
wipe dalvik cache? i just pressed wipe cache... sorry im a bit of a n00b at this stuff. a factory reset from cwm... how?

Thanks so much!
It worked! Thank you SO MUCH! I'ts nearly 1am over here in NZ, so its time for sleep!

JayBeeNZ said:
It worked! Thank you SO MUCH! I'ts nearly 1am over here in NZ, so its time for sleep!
Click to expand...
Click to collapse
It's fine, glad I could help

Related

HTC One V cutom firmware problem

Hello guys,
First of all this forum is really nice it helped me alot, but unforcenatly i have a bit of an issue with one particular custom firmware the paranoid android. http://forum.xda-developers.com/showthread.php?t=1794562
I did everything they said about flashing the rom but now im stuck on the htc logo. It wont move beyond that point.
Please help me cause i really want to try this firmware.
Thanks in advance
iTAZUETA
iTAZUETA said:
Hello guys,
First of all this forum is really nice it helped me alot, but unforcenatly i have a bit of an issue with one particular custom firmware the paranoid android. http://forum.xda-developers.com/showthread.php?t=1794562
I did everything they said about flashing the rom but now im stuck on the htc logo. It wont move beyond that point.
Please help me cause i really want to try this firmware.
Thanks in advance
iTAZUETA
Click to expand...
Click to collapse
You need to:
1st. Go to bootloader - fastboot usb
2nd. Flash the kernel provided in the ROM's OP
3rd. Go to Recovery
4th. Wipe Cache - Dalvik Cache - Format System - System
5th. Install the ROM.
6th. Reboot
7th. Enjoy
1ceb0x said:
You need to:
1st. Go to bootloader - fastboot usb
2nd. Flash the kernel provided in the ROM's OP
3rd. Go to Recovery
4th. Wipe Cache - Dalvik Cache - Format System - System
5th. Install the ROM.
6th. Reboot
7th. Enjoy
Click to expand...
Click to collapse
thanks for the fast reply im gonna try it now and let u know.
Still get stuck at the htc logo? Do u have any other idea what i can try?
iTAZUETA said:
Still get stuck at the htc logo? Do u have any other idea what i can try?
Click to expand...
Click to collapse
there's something you are doing wrong. are you sure you are flashing the KERNEL, wipe everything and then FLASH the ROM?
1ceb0x said:
there's something you are doing wrong. are you sure you are flashing the KERNEL, wipe everything and then FLASH the ROM?
Click to expand...
Click to collapse
Yes i was flashing the KERNEL (if u refer to the boot.img) And i wiped the full phone. ill try it later again and let u know if i experience any errors.
Thank you very much got it to work now. I accidently flashed the wrong kernel (stupid me). Thanks for ur help. Really appreciate it.
Best Regards iTAZUETA
PS: Forum Admin Can close this Thread. And Thanks Again to 1ceb0x
hey 1ceb0x
I found a small bug, every time u try to open a picture in the Gallery app, the app crashes. just wanted to let you know.
Best regard iTAZUETA
iTAZUETA said:
hey 1ceb0x
I found a small bug, every time u try to open a picture in the Gallery app, the app crashes. just wanted to let you know.
Best regard iTAZUETA
Click to expand...
Click to collapse
thanks. can you post a logcat?
i don't have issues with the gallery app. did you changed something in dpi settings?
Yeah i was playing around with the DPI to check witch one suites me more when i reset the setting backup it was working again i think it was just me messing around with the dpi if i have the logcat ill post just need to check if the crash is still there.

Cant boot into CWM

Hello!
I have an arc s(lt18i) and i was running official 4.0.4 on it which was rooted.
So Everything was working fine.I thought of installing this :
http://forum.xda-developers.com/showthread.php?t=1780319
I made a full nandroid backup.When I rebooted into recovery and clicked install zip from sd card and chose that zip file, it gave a 'status 7 error'.
And now when I reboot i cant get into recovery.
PLEASE! Can someone tell me how do you get into recovery? I have wiped to factory reset/wiped cache and dalvik cache.
PLEASE!
Moonheart said:
Hello!
I have an arc s(lt18i) and i was running official 4.0.4 on it which was rooted.
So Everything was working fine.I thought of installing this :
http://forum.xda-developers.com/showthread.php?t=1780319
Click to expand...
Click to collapse
Not really a good idea to install Pro ROMs on the Arc or vice versa. You need THIS.
OH DAMN!!! Why the heck didnt I see the 'Pro' there.Btw, will this zip not give me a status 7 error?
Moonheart said:
OH DAMN!!! Why the heck didnt I see the 'Pro' there.Btw, will this zip not give me a status 7 error?
Click to expand...
Click to collapse
No, as it's for your device.
Thanks man, for pointing out my stupidity!!
Moonheart said:
Thanks man, for pointing out my stupidity!!
Click to expand...
Click to collapse
You're not the first, and I'd bet money you won't be the last.
And you would win the bet with low profits!

[Q] dinc2 is stuck on HTC after flash Help please what do i do?

i had recently downgraded to 2.3.3 and rooted my droid it was working fine and turned on and i had no problems. I decided to flash Paranoid Android and i followed the guide completely but when i went to reboot it got stuck on the HTC screen it wouldnt go past that and ive tried everything i even made a backup before i flashed but the backup isnt working. Please help me and im sorry im a bit of a newb all help is appreciated thanks.
you gotta flash cm10 and the kernel for it before you flash PA. do a full wipe then install CM10/kernel with it. then flash PA over that without wiping.
ok ill try it
JehC said:
you gotta flash cm10 and the kernel for it before you flash PA. do a full wipe then install CM10/kernel with it. then flash PA over that without wiping.
Click to expand...
Click to collapse
ok im gonna try that thanks!
fixed!
JehC said:
you gotta flash cm10 and the kernel for it before you flash PA. do a full wipe then install CM10/kernel with it. then flash PA over that without wiping.
Click to expand...
Click to collapse
i flashed cm10 and the kernel and it fixed my phone thank you so much i really appreciate it!
np. i had the same issues when i first flashed PA

Installing Smart Xperia ROM: Stuck in Boot.

I have tried to Flash my Xperia arc S (Lt18i) with the Smart Xperia ROM.
But during the boot after installing Smart Xperia ROM part I, its stuck with the Boot animation.
My Device info:
Baseband: 77.
Kernel: ArcKnight_4.1
Unlocked Bootloader.
Android 4.0.4
(I have flashed " XperiaArc-SmartXperiences-ROM Stock Framework " with CWM as it was suggested at the post if stuck in Bootload, but still not working for me. The boot animation is stuck. I've waited for 10 mins, but the boot animation goes on and on and on.)
Please HELP me!
Reflash Stock RoM. This is the 82991 i said this. We have enough suchs threads, think what to do in case of problems BEFORE doing something.
ϟ ϟ [email protected]£R ϟ ϟ
jader13254 said:
Reflash Stock RoM. This is the 82991 i said this. We have enough suchs threads, think what to do in case of problems BEFORE doing something.
ϟ ϟ [email protected]£R ϟ ϟ
Click to expand...
Click to collapse
I've restored my phone as I made a backup earlier with CWM.
However, my device is running well now.
What I am asking is that is there any solution for my problem?
Why the boot stuck in my case?
ashique.akash said:
I've restored my phone as I made a backup earlier with CWM.
However, my device is running well now.
What I am asking is that is there any solution for my problem?
Why the boot stuck in my case?
Click to expand...
Click to collapse
If u have unlocked bootloader u should not ask such questions bro.
First flash kernel
Go to cwm and wipe everything except sdcard
Flash the rom
Flash the wifi modules for the kernel
reboot
So if you install part II, don't factory reset again !!, Just Wipe dalvik cache
Sent by my SMART XPERIA ROM JB/ ICS using my fabulous weapon
danisariandi said:
So if you install part II, don't factory reset again !!, Just Wipe dalvik cache
Sent by my SMART XPERIA ROM JB/ ICS using my fabulous weapon
Click to expand...
Click to collapse
I had done everything you told in your post. But it bootloops.
Please can you enlist the process here for me? That yould be so helpful.

[Q] Any JB 4.3 (or other JB) roms with working ringtone?

Having only dabbled with rooting and upgrading a Evo View tablet, I jumped into the deep end with my Incredible 2.
I got it to S-off and rooted and have been trying a few different ROMS (mostly chillybean's) and have what seems to be a common problem:
Sound works fine until a call is received. The ringtone fails to play and then sound doesn't work at all until its reset. I have had success resetting the sound by activating Google Voice Search with a long press of the search button. This seems to be true for CM10.2 and PAC. I didn't test this on an Evervolv because 3G never comes back on after Wi-fi has been turned on.
Has anybody had better luck with a particular 4.3 ROM? Does this sound issue affect pre-4.3 JB roms?
Thanks!
brettbee said:
Having only dabbled with rooting and upgrading a Evo View tablet, I jumped into the deep end with my Incredible 2.
I got it to S-off and rooted and have been trying a few different ROMS (mostly chillybean's) and have what seems to be a common problem:
Sound works fine until a call is received. The ringtone fails to play and then sound doesn't work at all until its reset. I have had success resetting the sound by activating Google Voice Search with a long press of the search button. This seems to be true for CM10.2 and PAC. I didn't test this on an Evervolv because 3G never comes back on after Wi-fi has been turned on.
Has anybody had better luck with a particular 4.3 ROM? Does this sound issue affect pre-4.3 JB roms?
Thanks!
Click to expand...
Click to collapse
I answered part of my own question:
I confirmed that the Evervplv nightly 2013.09.24 has a working ringtone. But once WiFi is turned on, 3G is off until reboot.
try beanstalk 1.300
brettbee said:
I answered part of my own question:
I confirmed that the Evervplv nightly 2013.09.24 has a working ringtone. But once WiFi is turned on, 3G is off until reboot.
Click to expand...
Click to collapse
I have been using beanstalk 1.300 with the b-team CM kernel.it has 4.2.2 and everything works! its fast and smooth with great battery life the 4.3 roms have some issues so I am gonna stick with this one
AFAIK everything in the newest Evervolv works.
phillibl said:
AFAIK everything in the newest Evervolv works.
Click to expand...
Click to collapse
Are you using a nightly? Which one?
Does 3G come back after WiFi is turned on?
Chillybean updated his CM10.2 ROM -- the 20130929 build has the sound issue fixed.
kahlil88 said:
Chillybean updated his CM10.2 ROM -- the 20130929 build has the sound issue fixed.
Click to expand...
Click to collapse
The 929 rom is not working for me and I know at least of couple of other folks in the same situation.
Are you using the 929 ROM with sound successfully? What - exactly - did you do to install it? I'm wondering if it's a I'm-doing-something-stupid/wrong thing or maybe a hardware revision thing.
Thanks!
brettbee said:
The 929 rom is not working for me and I know at least of couple of other folks in the same situation.
Are you using the 929 ROM with sound successfully? What - exactly - did you do to install it? I'm wondering if it's a I'm-doing-something-stupid/wrong thing or maybe a hardware revision thing.
Click to expand...
Click to collapse
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.
kahlil88 said:
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.
Click to expand...
Click to collapse
Thanks! I'll give that a try. I wasn't quite as thorough with wiping/formatting as you were. Fingers crossed....
kahlil88 said:
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.
Click to expand...
Click to collapse
brettbee said:
Thanks! I'll give that a try. I wasn't quite as thorough with wiping/formatting as you were. Fingers crossed....
Click to expand...
Click to collapse
Well, that didn't work for me. The only thing I didn't do was "Format boot." I couldn't find that in Revolutionary CMW.
I'm thinking there's something different about my phone. Hardware? How I rooted it?
brettbee said:
Well, that didn't work for me. The only thing I didn't do was "Format boot." I couldn't find that in Revolutionary CMW.
I'm thinking there's something different about my phone. Hardware? How I rooted it?
Click to expand...
Click to collapse
What version of gapps are you installing? Try flashing the ROM without installing gapps and see if it will boot, then if you're successful go back into recovery mode and flash gapps-jb-20130813-signed.zip from here.
funny question, does docking mode work with these roms?
Check Chilly's forum. The Inc S Dev posted a flashable fix for the sound problems. I flashed it and all is fine.
EDIT: Damn autocorrect...
Sent from my Nexus 7 using xda app-developers app
flinzak said:
Check Chilly's forum. The Inc S Dev posted a flashable fix for the sound problems. I flashed it and all is fine.
EDIT: Damn autocorrect...
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks - found it and downloaded it! I'll give it a try when I can have my phone out of service.....
I flashed Evervolv 10/30 nightly yesterday and it looks like they have the 3G/WiFi toggle issue resolved. The quick settings were missing but, I'm guessing that'll be corrected in the next build. Also, flashed B-Team Kernel. 4.3-s2w version resulted in bootloops but, the 4.3-v2 version worked just fine. No sound issues as far as I can tell.
Does the latest Everlov nightly work? Also what are you all referring to when you say Chilly's forum, the "Inc S dev fix", and AntiVenom SDW? I went through 5-10 of the most recent pages on Everlov and didn't see any of these things, so would someone mind providing links?
Thanks
jonatcer said:
Does the latest Everlov nightly work? Also what are you all referring to when you say Chilly's forum, the "Inc S dev fix", and AntiVenom SDW? I went through 5-10 of the most recent pages on Everlov and didn't see any of these things, so would someone mind providing links?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2049902 this is chillybean's thread you can find AntivenomSDW in the other section of the OP (first post) the inc S dev fix can be found here http://d-h.st/1h6
ArslanQureshi said:
http://forum.xda-developers.com/showthread.php?t=2049902 this is chillybean's thread you can find AntivenomSDW in the other section of the OP (first post) the inc S dev fix can be found here http://d-h.st/1h6
Click to expand...
Click to collapse
Alright thanks a bunch. One more question though - what exactly is AntivenomSDW? Where can I find more information on it? Google is little help here.
jonatcer said:
Alright thanks a bunch. One more question though - what exactly is AntivenomSDW? Where can I find more information on it? Google is little help here.
Click to expand...
Click to collapse
its an flashable zip that completely wipes your device it is highly recommended to use whenever you flash a new rom it is developed by Chillybean
ArslanQureshi said:
its an flashable zip that completely wipes your device it is highly recommended to use whenever you flash a new rom it is developed by Chillybean
Click to expand...
Click to collapse
Alright thanks a bunch.
Would you, or anyone else still reading this thread, care to weight in on whether Evervolv or CB's rom (Which? Beanstalk?) is more stable?

Categories

Resources