Develop Bugs

[Help] Custom ROM

I updated my Arc S with the official ICS update from sony however the lag and other issues were driving me mad so i decided to root my phone.
The next obvious step seemed to be installing a custom ROM so i installed clockwork mod and made a back up, everything great so far.
I made a back-up and wiped my phone, went to install the free xperia CM9 ROM and thats when everything went pear shaped.
The ROM didn't install, i wiped my phone again but got the same distressing fail.
Thinking there was possibly a fault with the zip i re-downloaded the ROM and found an alternative (one of the arcronium ones i think) and put those on my SD, all seemed to be well and good, i had a backup and Clockwork Mod what could possibly go wrong?
Well when i tried to boot my phone in recovery all i get is a boot loop! :crying:
The only thing i could do was to use flashtools and flash a ROM to my beloved Arc S
I tried this exact process a few times but suffered the same fate, please can someone tell me what I'm doing wrong? or could i apply a custom ROM using flashtools?
Where I'm currently at:
Model number: LT18i
Android version: 4.0.3
Baseband: 8x55A-AAABQOAZM-203028G-70
Kernel Version: 2.6.32.9-perf [email protected] #1
Build Number: 4.1.A.0.562
Where I would like to be in an ideal world:
Fully working Arc S running Cynogen Mod 9 :victory:
Any help achieving this would be greatly appreciated!

ste2610 said:
I updated my Arc S with the official ICS update from sony however the lag and other issues were driving me mad so i decided to root my phone.
The next obvious step seemed to be installing a custom ROM so i installed clockwork mod and made a back up, everything great so far.
I made a back-up and wiped my phone, went to install the free xperia CM9 ROM and thats when everything went pear shaped.
The ROM didn't install, i wiped my phone again but got the same distressing fail.
Thinking there was possibly a fault with the zip i re-downloaded the ROM and found an alternative (one of the arcronium ones i think) and put those on my SD, all seemed to be well and good, i had a backup and Clockwork Mod what could possibly go wrong?
Well when i tried to boot my phone in recovery all i get is a boot loop! :crying:
The only thing i could do was to use flashtools and flash a ROM to my beloved Arc S
I tried this exact process a few times but suffered the same fate, please can someone tell me what I'm doing wrong? or could i apply a custom ROM using flashtools?
Where I'm currently at:
Model number: LT18i
Android version: 4.0.3
Baseband: 8x55A-AAABQOAZM-203028G-70
Kernel Version: 2.6.32.9-perf [email protected] #1
Build Number: 4.1.A.0.562
Where I would like to be in an ideal world:
Fully working Arc S running Cynogen Mod 9 :victory:
Any help achieving this would be greatly appreciated!
Click to expand...
Click to collapse
FXP ROM function best on FXP Kernels... Try flashing one of their Kernels and reinstalling the ROM.

Bootloader open?
And for CM u need a fxp kernel, but u cant use it with arconium, there u need trinity or arc-knight kernel

Make sure to do a "Wipe data / factory reset" and "Wipe cache partition" when going from stock or from another custom ROM

I have no idea if my bootloader is open or not, how do i tell?
I found this link to the FXP CM 9.0 but i have no idea what anything is.
http://forum.xda-developers.com/showthread.php?t=1356685
I'm guesing "CM9.0 RC1 FXP127" is a kernel? and if so how do i flash it and what do i do next?
Thanks for the replies, I'll be getting my Arc fixed in no time

Did you follow any instructions from sony to unlock bootloader?
Sent from my LT18i using xda app-developers app

ste2610 said:
I'm guesing "CM9.0 RC1 FXP127" is a kernel? and if so how do i flash it and what do i do next?
Click to expand...
Click to collapse
No, it's a ROM. You need to read things carefully before just going and flashing this or flashing that. Flash a stock ROM with the Flashtool and start over.

ste2610 said:
I updated my Arc S with the official ICS update from sony however the lag and other issues were driving me mad so i decided to root my phone.
The next obvious step seemed to be installing a custom ROM so i installed clockwork mod and made a back up, everything great so far.
I made a back-up and wiped my phone, went to install the free xperia CM9 ROM and thats when everything went pear shaped.
The ROM didn't install, i wiped my phone again but got the same distressing fail.
Thinking there was possibly a fault with the zip i re-downloaded the ROM and found an alternative (one of the arcronium ones i think) and put those on my SD, all seemed to be well and good, i had a backup and Clockwork Mod what could possibly go wrong?
Well when i tried to boot my phone in recovery all i get is a boot loop! :crying:
The only thing i could do was to use flashtools and flash a ROM to my beloved Arc S
I tried this exact process a few times but suffered the same fate, please can someone tell me what I'm doing wrong? or could i apply a custom ROM using flashtools?
Where I'm currently at:
Model number: LT18i
Android version: 4.0.3
Baseband: 8x55A-AAABQOAZM-203028G-70
Kernel Version: 2.6.32.9-perf [email protected] #1
Build Number: 4.1.A.0.562
Where I would like to be in an ideal world:
Fully working Arc S running Cynogen Mod 9 :victory:
Any help achieving this would be greatly appreciated!
Click to expand...
Click to collapse
Dude, First thing you gotta do is unlock your boot loader. Google around you will find it. To unlock the boot loader as well as to flash a custom kernel you need something called fastboot. There is a video in youtube on how to use fastboot and flash custom kernel and that user has provided the download link as well go and search. After unlocking boot loader install CWM (either with auto installer or by flashing a custom kernel with CWM) After doing that flash the FXP127 zip booting in to CWM. The FXP127 zip contains the FXP kernel as well so don't worry when you flash that the kernel gets changed as well. Still can't figure it out. I suggest you keep away from flashing roms Just kidding.

I'm on a stock ROM at the moment that i flashed so i'll just follow some instructions and unlock my bootloader first.
Where can i the latest FXP kernel?
Again Cheers guys

ste2610 said:
I'm on a stock ROM at the moment that i flashed so i'll just follow some instructions and unlock my bootloader first.
Where can i the latest FXP kernel?
Again Cheers guys
Click to expand...
Click to collapse
Should be on the same thread where you found the ROMs.
Sent from my LT18i using xda app-developers app

ste2610 said:
I'm on a stock ROM at the moment that i flashed so i'll just follow some instructions and unlock my bootloader first.
Where can i the latest FXP kernel?
Again Cheers guys
Click to expand...
Click to collapse
You can find CM9 kernel in zip that you just downloaded. Open it an Extract "boot.img" file. That is the kernel. Flash that first, go to recovery, wipe all data, wipe dalviks chcae, format /system and then chose "install .zip from SD card" and select FXPCM9.zip (or whatever it is named) and it will install you CM9. Don't forget on Gapps.

excellent i unlocked my bootloader and i've got the kernel and rom i want, just one last thing, whats the baseband and when do i flash it (if i have to flash it at all)?
Unfortunately i forgot i uninstalled the stock sony launcher and when unlocking the bootloader it wiped launcher pro so my phones pretty useless as it stands so the quicker i can get a new rom on the better!
Many thanks again, I'm slowly getting there

All done
Cheers for the help everyone!

baseband controls radio communications like communications with cell towers

I did not flash any baseband and it works
Sent from my Xperia Arc using Tapatalk 2

My friend was flashing his Rom, unfortunately He felt bootloop on his phone. Give me solution !!
Sent from my LT15i using xda premium

danisariandi said:
My friend was flashing his Rom, unfortunately He felt bootloop on his phone. Give me solution !!
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
Did he flash the kernel that was specific to the rom?
Sent from my LT18i using xda app-developers app

yes, he used kernel

Did he wipe data and cache?
Sent from my Xperia Arc S using xda app-developers app

yes

How Can I ınstall a Cygenmod Rom?

How Can I ınstall a Cygenmod Rom? And Which is the last Cygenmod Rom for my Xperia ARC?

Have a read of the stickys in General and then go find FXPs ROM in development.
Sent from my Phone.

well you need...
-CWM
-unlocked bootloader
-rooted device
and a guide on how to install it

Toggle Asserts ICS (Whatever ROM made for ARC/ARC S)
I also want to know!!!!!! I have been trying to install CM7 on my Arc Lt15i phone for a long time but was never able to due t the dreaded status 7 error. I toggled the script asserts but it still did not help me at all. Then I tried CM9 and it was the same damn disaster! Please let me know if you are able to install it. I hate the fact that I have the ARC S and the ARC Lt15i problem always colliding together. I hope this will not be a problem when JB comes around!

mamameerguevo said:
I also want to know!!!!!! I have been trying to install CM7 on my Arc Lt15i
Click to expand...
Click to collapse
It's simple, flash the kernel, install the ROM, done.

The kernel is in the .zip file(boot.img). You have to extract it. Place the zip file on your arc. Flash the kernel with fastboot or flashtool. Then enter cwm. Wipe Cache, wipe dalvik cache and factory reset. Then install the rom.
Sent from my LT18i using xda app-developers app

Cuerrix said:
The kernel is in the .zip file(boot.img). You have to extract it. Place the zip file on your arc. Flash the kernel with fastboot or flashtool. Then enter cwm. Wipe Cache, wipe dalvik cache and factory reset. Then install the rom.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Simple like that

just follow the instructions provided exactly 100% and you should be fine.
however,
last time i tried to install fxp cm9.0 by flashing the kernel 1st i almost killed my phone and it scared the **** outta me. i cant even enter recovery or fastboot and i had to reflash a stock ftf in flashmode to try it again. i think that flashing the zip file together with a full wipe then only the kernel works better..any ideas?

[Q] I can not install custom roms on arc with locked bl

I have a arc with locked bl and I have rooted it and installed cwm.
But when I try to install custom roms like Ultimate HD 2, Jelly sandwitch 7.4 or Xperia pureness 13 everything goes right except installing.
The installation of rom takes only 2 to 3 seconds and it finishes successfully but when I reboot my phone, it stucks at sony logo.
Normally installation of a rom takes minimum 30 seconds but in my phone it takes only 2 to 3 seconds.
What should i do?
How to install custom roms?

rikadrahman said:
I have a arc with locked bl and I have rooted it and installed cwm.
But when I try to install custom roms like Ultimate HD 2, Jelly sandwitch 7.4 or Xperia pureness 13 everything goes right except installing.
The installation of rom takes only 2 to 3 seconds and it finishes successfully but when I reboot my phone, it stucks at sony logo.
Normally installation of a rom takes minimum 30 seconds but in my phone it takes only 2 to 3 seconds.
What should i do?
How to install custom roms?
Click to expand...
Click to collapse
Hello people,
This is my same problem ....
Can someone help us?????: Choro:

rikadrahman said:
I have a arc with locked bl and I have rooted it and installed cwm.
But when I try to install custom roms like Ultimate HD 2, Jelly sandwitch 7.4 or Xperia pureness 13 everything goes right except installing.
The installation of rom takes only 2 to 3 seconds and it finishes successfully but when I reboot my phone, it stucks at sony logo.
Normally installation of a rom takes minimum 30 seconds but in my phone it takes only 2 to 3 seconds.
What should i do?
How to install custom roms?
Click to expand...
Click to collapse
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install custom Rom from sd card without rebooting
Sent from Xperia Arc S

I had the same problem.Try installing another version of CWM.It worked for me.

installing custom rom in locked bootloader
ThiagoBR said:
Hello people,
This is my same problem ....
Can someone help us?????: Choro:
Click to expand...
Click to collapse
Ensure that the custom rom you are installing is based on your current firmware..i.e. If you are in .42 or .58 GB install custom rom for GB, if you are in .431 ICS install custom rom based in .431. Ultimate HD, Jellysandwich 7.4 are based on .587 ICS. I have installed these on my arc s w/ locked bootloader with no problem..just be sure to do the ff via cwm:
Wipe cache partition
Wipe data/factory reset
In advance wipe dalvik cache
In mount and storage wipe cache, wipe data and wipe system
Install rom via install zip from sd card
Also make sure that you downloaded the rom completely, verify if the mb you downloaded is the same as the mb indicated in the link.
I recommend you try the ultimate hd v2 by jader since cwm is integrated in it.

Problem lt18a
ninehuss said:
Ensure that the custom rom you are installing is based on your current firmware..i.e. If you are in .42 or .58 GB install custom rom for GB, if you are in .431 ICS install custom rom based in .431. Ultimate HD, Jellysandwich 7.4 are based on .587 ICS. I have installed these on my arc s w/ locked bootloader with no problem..just be sure to do the ff via cwm:
Wipe cache partition
Wipe data/factory reset
In advance wipe dalvik cache
In mount and storage wipe cache, wipe data and wipe system
Install rom via install zip from sd card
Also make sure that you downloaded the rom completely, verify if the mb you downloaded is the same as the mb indicated in the link.
I recommend you try the ultimate hd v2 by jader since cwm is integrated in it.
Click to expand...
Click to collapse
My arc s (LT18a) , android is rooted with the 2.3.4 kernel 2.6.32.9-perf SENCUser SEMCHost @ # 1 (4.0.2.A.0.42). What ROM fits in my case?

Depends on if you have your bootloader locked or not. If it's locked, get either Jelly sandwhich or ultimate HD (They're both pretty much exactly the same)

jman2131 said:
Depends on if you have your bootloader locked or not. If it's locked, get either Jelly sandwhich or ultimate HD (They're both pretty much exactly the same)
Click to expand...
Click to collapse
Stop giving wrong info! If he's on GB 2.3.4 he has first to install an ICS stock rom before he tries that. Unlocked bootloader? Do you really think?
ThiagoBR said:
My arc s (LT18a) , android is rooted with the 2.3.4 kernel 2.6.32.9-perf SENCUser SEMCHost @ # 1 (4.0.2.A.0.42). What ROM fits in my case?
Click to expand...
Click to collapse
You first need to update to ICS and then you can install any of the roms you want!
Sent from my LT18i using Tapatalk 2

cemunleashed said:
I had the same problem.Try installing another version of CWM.It worked for me.
Click to expand...
Click to collapse
Anyone please give me the link of working CWM
FAdrums said:
You first need to update to ICS and then you can install any of the roms you want!
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
I am already on ICS .587

rikadrahman said:
Anyone please give me the link of working CWM
I am already on ICS .587
Click to expand...
Click to collapse
what version of cwm did you install? was it pvyparts' from x-parts?

Latest CWM and Custom ROM for .42GB
rikadrahman said:
Anyone please give me the link of working CWM
I am already on ICS .587
Click to expand...
Click to collapse
Have you tried this?
CWM
ThiagoBR said:
My arc s (LT18a) , android is rooted with the 2.3.4 kernel 2.6.32.9-perf SENCUser SEMCHost @ # 1 (4.0.2.A.0.42). What ROM fits in my case?
Click to expand...
Click to collapse
Have not tried this version personally, only the developer's earlier GB Rom. I hope this works for you.
X-Gamer 1.6
Anyway .587 ICS has a lot of custom roms working for locked bootloader so you may consider upgrading your firmware.

jman2131 said:
what version of cwm did you install? was it pvyparts' from x-parts?
Click to expand...
Click to collapse
I am using Doomlord's CWM from Flashtool.

rikadrahman said:
I am using Doomlord's CWM from Flashtool.
Click to expand...
Click to collapse
Ok download "x parts" from play store and install pvyparts within the app. It should work
Sent from Xperia Arc S

You first need to update to ICS and then you can install any of the roms you want!
Sent from my LT18i using Tapatalk 2[/QUOTE]
Thank you FAdrums!!!!
Excuse my ignorance, but how do I update to ICS?

ThiagoBR said:
You first need to update to ICS and then you can install any of the roms you want!
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Thank you FAdrums!!!!
Excuse my ignorance, but how do I update to ICS?[/QUOTE]
just flash this with flashtool

ninehuss said:
Have you tried this?
CWM
Click to expand...
Click to collapse
Problem solved with CWM installer v5 from that link.
Thanks Everyone.

{Q} Help flashing P.A.C.man rom!

Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal

xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
After you flash the Rom reboot the phone and just let it fully boot. After that you can go back to CWM and flash the WiFi modules and other add-ons

You need to boot into the kernel's recovery and set it to jb mode or ics depending on your rom. Then make sure your rom and gapps don't exceed the system partition size, which it most likely did if you flashed the full gapps package as well.
The default recovery for the lupus jb kernel is TWRP, if you load into another CWM recovery it most likely did not flash to the correct partition arrangement that lupus kernel use therefore the rom can't boot.
Sent from XDA app

Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™

crazymonkey05 said:
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...

xkeita said:
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
Click to expand...
Click to collapse
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB

tallman43 said:
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
Click to expand...
Click to collapse
I did what you said but it keeps bootlooping @[email protected]

Why don't u use turbo kernel and start the process again...and no is not normal to take out your memory card to enter boot menu
Sent from my R800i using xda app-developers app

Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...

xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
Cool:good:

xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Sent from my GT-I9300 On Official JB

@tallman43 thx for the help bro (Y)

wedgess said:
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Click to expand...
Click to collapse
I flashed the FTF with unlocked partitions played with the phone for about 30 secs, then flashed kernel, went to kernel menu then formated system, data, cache and davlik via CWM then flashed the rom, but that ended in bootloop, did the same with turbo kernel and it worked.

easy fix dont use Pac Rom its junk
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
use slimbean !takes less room use it with lupus kerenel jb 480 rom.
---------- Post added at 02:49 PM ---------- Previous post was at 02:00 PM ----------
Just want to tell you that your kernels are by far the best. But the PAC man rom and the Paranoid hmm Dont work I cant get them to ever boot on my R800x CDMA
Keep up the hard work.

[Q] How to install Super Jelly Bean ROM

Can anyone please provide me the step by step tutorial to install Super Jelly Bean 2.0 created by Harsh586. I am a newbie here and my friend do the root, rom processes for me. He was kinda busy these days so i thought may be i could learn how to install a particular rom. I have been here from past few days seeing the use of Kernels and ROMs but still didn't find any step by step tutorial to install this ROM. If anyone could help here?
About my ARC S:
Model number- LT18i
Android Version- 4.0.4
Kernel Version- 2.6 Lupus Stock GB+ICS v.10

nolanfan00007 said:
If anyone could help here?
Click to expand...
Click to collapse
Learn to READ a thread before asking questions about it.
harsh586 said:
HOW TO INSTALL :
Note : only for unlocked bootlader
1. copy super jelly bean and gapps to sd card
2. flash any jb kernel for arc/arcs.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel work fine too..
fusion kernel for arc and arc s download from this thread - Fusion 4.3
3. flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.full wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6. flash Super Jelly Bean
7.flash gapps : use this link : Gapps For SJB
8.flash wifi modules of respective kernel
9.reboot
10.enjoy​
Click to expand...
Click to collapse

XperienceD said:
Learn to READ a thread before asking questions about it.
Click to expand...
Click to collapse
Learn to READ the post before replying about it. I said i am a newbie, i don't know how these things work because my friend used to do root-roms things for me. I have already seen the installation notes but i am not aware of flashing roms or gaps or how to get started.
It would be great if someone provide the step by step guide for installing this ROM and that's all what i am asking, sire.

nolanfan00007 said:
Learn to READ the post before replying about it.
Click to expand...
Click to collapse
Let's have a look...
nolanfan00007 said:
I have been here from past few days seeing the use of Kernels and ROMs
Click to expand...
Click to collapse
That would suggest you've read things like the stickys, and given that there is more than one page in each section that you may just have come across some of the various guides that are floating about that describe how to flash ROMs via CWM (which are in the stickys to begin with), so when you then say...
nolanfan00007 said:
but still didn't find any step by step tutorial to install this ROM.
Click to expand...
Click to collapse
...I would assume you're just being lazy as the step by step details are in the thread.
nolanfan00007 said:
I said i am a newbie, i don't know how these things work because my friend used to do root-roms things for me. I have already seen the installation notes but i am not aware of flashing roms or gaps or how to get started.
Click to expand...
Click to collapse
So what on Earth have you been doing here for the last few days.

All i recommend is just reading up on it all first.
Otherwise if things go wrong you will have to ask more questions...and have no phone till you fix it.
Only start messing about with you phone when you at least know a bit about what youre doing.
Or you will just keep on getting sarcastic and pretty rude answers.
XperienceD...you clearly arent going to stop this problem with people posting without searching, so PLEASE give the f*** up with your pointless answers

Install adb drivers,java sdk platform and flashtool 0.6.8.0
1. Unlock boot loader with adb
2. Download fusion 5 and fusion add-ons, Rom and gapps
3. Copy fusion add-ons and Rom / gapps to sd card
4. Use flashtool -fastboot to install kernal
5. Reboot phone and press back button when phone vibrates on fusion logo this will take you into cwm
6. Follow from step 5 on how to install
From flashing kernel to Rom booted will take 10mins
If you get stuck use search or google,just remember you are not the first person to ask and there are LOADS of tutorials on how to do everything on here
One other thing super jelly bean are only one out off I think 4 or 5 roms which are based on jelly bean CM10 The most of the rest are ICS which use different kernels

Don't be afraid, sjb is a worth-messing-up rom. If you got bootloop you've got your friend afterall.

yo-meister said:
so PLEASE give the f*** up with your pointless answers
Click to expand...
Click to collapse
What you may find pointless, I don't, and if this new member grasps the point of my post (hopefully a few older members will too), then it isn't actually pointless.

Can't mount Sdcard
Originally Posted by harsh586
HOW TO INSTALL :
Note : only for unlocked bootlader
1. copy super jelly bean and gapps to sd card
2. flash any jb kernel for arc/arcs.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel work fine too..
fusion kernel for arc and arc s download from this thread - Fusion 4.3
3. flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.full wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6. flash Super Jelly Bean
7.flash gapps : use this link : Gapps For SJB
8.flash wifi modules of respective kernel
9.reboot
10.enjoy
Click to expand...
Click to collapse
I am currently doing this. Flashed the .img with flashtool and fully-wiped. The problem is I can't install the Super Jelly Bean rom that i copied into my external sdcard. It says Can't mount Sdcard. Any helps from the seniors please? In addition I've actually searched numerous but none of them seems to work with this particular version of CWM which included in the SJB package from http://forum.xda-developers.com/showthread.php?t=2134257. Best regards for helps!

MeLTvS said:
It says Can't mount Sdcard.!
Click to expand...
Click to collapse
What does?

where?
where I can find this rom?

isaaccaleb said:
where I can find this rom?
Click to expand...
Click to collapse
using the search function, maybe.. MAYBE...

Phenomzye said:
using the search function, maybe.. MAYBE...
Click to expand...
Click to collapse
enviado desde algún lugar por medio de patatalk
Ok sorry haha