I have been running Gengersense B4 without any major issues other than the posted known issues (screen brightness & no 4G), which I was able to live with.
Today I went flash crazy and updated all my radios to the versions released with the OTA update, and everything was still working fine. The last thing I did was flash the stand alone kernel which was included in the OTA update yesterday.
The good news is that the new kernel fixed the brightness issue with the rom.
The bad news is that my wifi now just says "error".
Anyone have any ideas?
Nevermind...downloaded the stock kernel. The non-stock version fixed the brightness and didn't break wifi.
Title = Question.
The closest I got was the MIUI ROM that's up on the front page of the development forum right now. It was so close to working. It said "No SIM Card" but the calls worked!! And the -36 baseband was recognized! The only problem was that with that status message, the phone would not allow me to save any APN settings, therefore I could not get data access.
I also tried it with the -42 baseband. These should be the newest AT&T specific basebands available that are AT&T specific.
The real problem is, I can install 62 just fine, but it only supports the slower HSPA data speeds as these are for the R800i.
I don't really expect a solution but I thought I'd ask
akhomerun said:
Title = Question.
The closest I got was the MIUI ROM that's up on the front page of the development forum right now. It was so close to working. It said "No SIM Card" but the calls worked!! And the -36 baseband was recognized! The only problem was that with that status message, the phone would not allow me to save any APN settings, therefore I could not get data access.
I also tried it with the -42 baseband. These should be the newest AT&T specific basebands available that are AT&T specific.
The real problem is, I can install 62 just fine, but it only supports the slower HSPA data speeds as these are for the R800i.
I don't really expect a solution but I thought I'd ask
Click to expand...
Click to collapse
I am running CM9 (Cyanogenmod9) FXP127 with Mjolnir Kernel and modules, and I have hspa+ and it is a great ICS rom in my opinion:laugh:
I am running CM9 (Cyanogenmod9) FXP127 with Mjolnir Kernel and modules, and I have hspa+ and it is a great ICS rom in my opinion
Click to expand...
Click to collapse
Thanks! Do you use a specific CM9 build?
Also, which baseband do you use?
Do you have the call volume problems that many CM9 builds have? What about your proximity sensor?
akhomerun said:
Thanks! Do you use a specific CM9 build?
Also, which baseband do you use?
Do you have the call volume problems that many CM9 builds have? What about your proximity sensor?
Click to expand...
Click to collapse
I run FXP127 which I beleive was released fairly recently, Video does not work... ALTHOUGH if after installation you flash the Mjolnir4 Kernel and the modules (wont get wifi if you dont install the modules) the video works fine... the only problems I am having is the proximity sensor (just realized that today) as long as you dont leave the number pad up and close it when you dont need it, it doesnt bother me much. I am however going to research a fix for it this weekend.
baseband -62 It runs at the same speed as with at&t's newest BB I flashed back and forth from stock to CM9 ran speed test results are identical
USMCmattyE4 said:
I run FXP127 which I beleive was released fairly recently, Video does not work... ALTHOUGH if after installation you flash the Mjolnir4 Kernel and the modules (wont get wifi if you dont install the modules) the video works fine... the only problems I am having is the proximity sensor (just realized that today) as long as you dont leave the number pad up and close it when you dont need it, it doesnt bother me much. I am however going to research a fix for it this weekend.
baseband -62 It runs at the same speed as with at&t's newest BB I flashed back and forth from stock to CM9 ran speed test results are identical
Click to expand...
Click to collapse
Thanks again. The proximity sensor is one of those really tricky things. I don't mind Bluetooth audio not working, and other minor things like that. Video does have to work for me.
Actually I never had a problem with a non-working proximity sensor, except for Skype handling it very poorly. So I basically need it to work.
I have gotten all ICS roms that I've tried working on my AT&T play 4G(lol 4g). On some I may manually set the APN. I've tried KA11-14 Rom, Xdarkmario's Rom in .42 & .62 Firmware with Doomkernel ICS beta v.3, & CM9(can't remember which build) with CM's Kernel & recommended FW. I haven't tested for differences in speeds(data), but I got the H signal on all.
Edit** In NY area I hear that the. 42 FW with -56 baseband gets better call reception & less drops then newer .62 fw.
Sent from my R800i using xda premium
Hi,
I just moved from Note2 stock ROM (rooted) 4.1.2 to Cyanogenmod 10.1 (latest nightly build as of today) 4.2.2 and now my note2 does not connect to home wifi (verizon router and Apple router). I did some research and found out samsung has a bug in 4.2.2 where it cannot connect to wifi 2.x Ghz bands but connects fine to 5.x GHz band. I am stuck at this point as my note2 does not connect to wifi. Have you heard of this problem before?
I tried both the mentioned wifi fix on the below link but it did not help
(link)galaxynote2root.com/galaxy-note-2-tutorials/how-to-fix-wifi-hanging-problems-on-galaxy-note-2/
I am now thinking if I move back from 4.2.2 to 4.1.2 or 4.1.1 (Cyanogenmod) then I can get rid of the wifi problem.
If I have to move to 4.1.2 then I went to their website [link]get.cm/?device=t0lte and could not find the mod for the version 4.1.2 or 4.1.1 (for GT-N7105)
Kindly advise.
Hi, Have you fixed you issue? i'm having the same peoplem
Hello guys, i am on the last slim beam stable 4.3 rom 10/27/13 build.
The problem i am having is that i think i am suffering from data drops on the rom.
I noticed when trying to play my iheart and satellite radio. It would play and just stop.
I would see signal bars and the 4g symbol but no data. I thought it was my location so i restored my tweak rom backup and i had no problems with using either program. I like this rom so i am just wondering if it is something i could do to get past that issue.. Thanks in advance..
edshawn911 said:
Hello guys, i am on the last slim beam stable 4.3 rom 10/27/13 build.
The problem i am having is that i think i am suffering from data drops on the rom.
I noticed when trying to play my iheart and satellite radio. It would play and just stop.
I would see signal bars and the 4g symbol but no data. I thought it was my location so i restored my tweak rom backup and i had no problems with using either program. I like this rom so i am just wondering if it is something i could do to get past that issue.. Thanks in advance..
Click to expand...
Click to collapse
Check your APN settings and if they are incorrect or missing, add the correct info manually. If the slim beam rom is based on the 4.3 Samsung Touchwiz roms that have been released lately you need to flash the T889UVALJ1 modem for now until we get our update. (T-Mobile USA) - No LTE with this modem.
APN settings: http://support.t-mobile.com/docs/DOC-6763
T889UVALJ1 modem/workaround for 4.3 TW based roms (temporary): http://goo.im/devs/teshxx/T889/Mods/T889UVALJ1_Modem-Nov_02_12-teshxx.zip
Hi all,
For the last month, my Gnex (toro) has been having sms not send occasionally (about 1 in 4). The majority will go through but about 25% will reveal the error Unable to Send Message (despite being on LTE). I was using the MMuzzy 4.3 build (with franco kernel r395) when it started.
1) clean flash with franco kernel r193 and same thing persisted (tested with radios 4.2.2 and 4.1.1)
2) clean flash with MMuzzy 4.2.2 build and franco kernel r384 and same thing persisted (tested with radios 4.1.1 and 4.2.2)
3) clean flash with CM 11 snapshot with franco kernel r395 (tested with radios 4.1.1 and 4.2.2) and same thing persists
To isolate the problem at each step, I use the stock messaging application but troubleshoot with Hangouts and same thing occurs. I also will enter the SMSC code at each step too if the problem is noted.
The ROM has been switched and doesn't seem to be the causing agent. Same for the kernel version and radios. I can't for the life of me figure it out.
Please help. It's so annoying.