hello, this problem is solved. i did use odin and now it's working fine
i have downloaded the custom kernel:
[DELL] CUSTOM KERNEL FOR 2.3.6 dxkt4 v1.2
download page: 4shared.com/zip/Ar8_VkVB/dell-kernel-dxkt4-v12-new.html
and this is the form i downloaded it from:
samsunggalaxygio.latvianforum.net/t659-dell-custom-kernel-for-236-dxkt4-v12
but wifi is not working anymore after I installed this kernel, is there a solution ?
maybe when i remove the clockworkmod, but how?
I am on stock rom android 2.3.3 and i have my gio rooted.
and i dit a factory reset 2x. but it didn't help.
Install another kernel, or with Odin install your stock ROM
konstantin12 said:
Install another kernel, or with Odin install your stock ROM
Click to expand...
Click to collapse
i try to install another kernel, but that didn't work. i'm going to try Odin. thanks the fast anser
rick97skyline said:
i try to install another kernel, but that didn't work. i'm going to try Odin. thanks the fast anser
Click to expand...
Click to collapse
thanks alot you are a hero !!
thanks, thanks ,thanks problemsolved with odin
to avoid problems, only install kernels made for this phone,
you should be happy for not bricking it!
hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
haryobimo96 said:
hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
Click to expand...
Click to collapse
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
a.fontenele said:
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
Click to expand...
Click to collapse
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
yewsiong said:
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
Click to expand...
Click to collapse
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
-storm- said:
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
Click to expand...
Click to collapse
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
haryobimo96 said:
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
Click to expand...
Click to collapse
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
yewsiong said:
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
Click to expand...
Click to collapse
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
haryobimo96 said:
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
Click to expand...
Click to collapse
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
yewsiong said:
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
Click to expand...
Click to collapse
which stock rom should i try before sending this phone to ssc????
haryobimo96 said:
which stock rom should i try before sending this phone to ssc????
Click to expand...
Click to collapse
DXLM3 of course. It is the latest with more bug fixes.
get it from here
http://samsung-updates.com/gt-i8150-galaxy-w/
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
haryobimo96 said:
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
Click to expand...
Click to collapse
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
bangprovn said:
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
Click to expand...
Click to collapse
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
haryobimo96 said:
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
Click to expand...
Click to collapse
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
sgilmans said:
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
Click to expand...
Click to collapse
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
haryobimo96 said:
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
Click to expand...
Click to collapse
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
yewsiong said:
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
Click to expand...
Click to collapse
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
After flashing back to stock , do a full factory reset/wipe using stock recovery (Boot into Stock Recovery) just wipe everything before you send it. BTW , In my place I try to update OTA so I can get the latest DXLM3 but it tell me no update available , I'm currently still in DXLC1 , pls check your region if DXLM3 has release officially ... or just flash DXLC1 and send it. (My 2 cents)
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
Just access to CWM, mount SD-card and format . And you must flash back to the official ROM
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
alfares43 said:
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
Click to expand...
Click to collapse
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
alfares43 said:
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
Click to expand...
Click to collapse
Mate, flash stock JB... Don't throw a new OS into the mix... It's easier if you use what you have 1st, fix it, then upgrade...
Ok bro i will try ...
Thanks for your help
Sounds like you tried to flash a KK rom with out flashing the KK bootloader.
Hi ...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Well ...
Tilagoon said:
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Click to expand...
Click to collapse
Thanks for the reply man ... but I have flashed a stock ROM not a custom and non of my stock ROMs booted ... Thanks again
With best Wishes
Hitman1376
Well i'm totally lost and depressed because i think i ruined my phone , i tried to flash a custom kernel on my GT-N7100 that didn't go well , first it was stuck on "Downloading don't turn off !! " and then i tried to fix it through resetting factory settings and still the same !!! , after that with absolute dumbness i ruined my recovery mode selecting custom recovery in bootloader option in odin , and now i don't know what to do , even tried to install other custom recoveries but nothing worked , So please could anyone help me , and i also want to know , that if i installed an official firmware through download mode which is still working would that fix anything ?? .
PLEASE I NEED IMMEDIATE HELP :crying::crying:
Were you running a stock or custom ROM before flashing the kernel? What version?
Flash via Odin a stock ROM. Preferably the same version. Pick the stock ROM from Sammobile that suits your phone.
After that you will need to re-root your phone again
grwalker said:
Were you running a stock or custom ROM before flashing the kernel? What version?
Flash via Odin a stock ROM. Preferably the same version. Pick the stock ROM from Sammobile that suits your phone.
After that you will need to re-root your phone again
Click to expand...
Click to collapse
Thaaaaaaaanks for responding , i actually installed the old fashion kitkat through download mode which i'm very thankful that it was still working , and after i flashed it , it came to my mind that my phone is formatted no data to lose , why not go ahead and try to install custom roms ; I love to learn always , and i managed to install CM ,
But here is another question that is not another puzzle in the way . Back then when i ruined my phone i was trying to flash AGNI kernel , i 've red about it and how it's cool for anyone , now i'd like to flash it on CM , but the catch is : I won't eat from the same plate twice , and also i noticed that CM using it's own kernel which is responsible for it's own resources , hence i'd like to know does flashing this "Agni Kernel " on CM this time causes the same trouble .
I have to versions of this kernel 1- PSN_pureCM_11_12+_smdk4x12_ANYROM-AROMA-v4.5.1_N7100_OC
2 - PSN_AGNi_pureSTOCK-v4.4.5_N7100_4.4.x_AROMA
My android GT-N7100
And thanks .
i installed android 9 and come back to stock rom then my wifi dosent work(and hotspot)
android 9 link ---- https://forum.xda-developers.com/mi-a2-lite/development/9-0-pixelexperience-p-unofficial-t3840551
before comeback to stock rom i trying to install TWRP from this link ------ https://bit.ly/2OW31TC
after that i cant go to recovery and just bootloop
so flashed stock rom with miflash and after that my wifi dosent work
pleas help me
aaref_kr said:
i installed android 9 and come back to stock rom then my wifi dosent work(and hotspot)
android 9 link ---- https://forum.xda-developers.com/mi-a2-lite/development/9-0-pixelexperience-p-unofficial-t3840551
before comeback to stock rom i trying to install TWRP from this link ------ https://bit.ly/2OW31TC
after that i cant go to recovery and just bootloop
so flashed stock rom with miflash and after that my wifi dosent work
pleas help me
Click to expand...
Click to collapse
Flashing back stock kernel will fix wifi
Just do it with fastboot
Code:
fastboot flash boot boot.img
Hi, I am facing a similar problem, installed a couple of treble pie roms, all of them had issues last installed one had wifi not working, so I flashed stock from a twrp backup that I had created earlier but wifi kept on not working for some reason .... I tried flashing the original boot.img from my backup as the previous post had suggested but same issue persists .... any ideas how to fix it please??
kfatah22 said:
Hi, I am facing a similar problem, installed a couple of treble pie roms, all of them had issues last installed one had wifi not working, so I flashed stock from a twrp backup that I had created earlier but wifi kept on not working for some reason .... I tried flashing the original boot.img from my backup as the previous post had suggested but same issue persists .... any ideas how to fix it please??
Click to expand...
Click to collapse
Flash the stock rom with mi flash tool
Medo22 said:
Flash the stock rom with mi flash tool
Click to expand...
Click to collapse
Sorry for the stupid question but, where can I download that ?
kfatah22 said:
Sorry for the stupid question but, where can I download that ?
Click to expand...
Click to collapse
from here
https://en.miui.com/download-354.html