Related
So I'm attempting to root the Continuum, but for some reason the phone won't effectively connect to Windows 7. For example, when I hook the phone up to my Samsung i7 laptop, all the phone does is charge. It doesn't even ask me if I would like to use usb storage or anything. The computer also doesn't recognize the device. Any ideas? Thanks!
A couple questions first:
- Did you install the Continuum drivers?
- Does your phone bring up the USB connection in the status bar?
- Does it bring up the Verizon VCast website on connection?
ExNukeSquid said:
A couple questions first:
- Did you install the Continuum drivers?
- Does your phone bring up the USB connection in the status bar?
- Does it bring up the Verizon VCast website on connection?
Click to expand...
Click to collapse
1. I likely did not install the Continuum drivers, and I have no clue where to get them. I'm assuming Samsung's website, but it's a bit hard to figure out and navigate...
2. My phone does not bring up the USB connection in the status bar.
3. When I go to the browser, it brings up the Verizon website with news, etc.
It should probably be stated as well that this phone is not activated. I am using it on wifi only for the time being because I traded it with a friend for another phone.
Alright, so I've figured it out. Strangely enough, I was just using a generic USB to microUSB cable, and I actually needed to use a Samsung cable. Weird, right?
sportsinger75 said:
Alright, so I've figured it out. Strangely enough, I was just using a generic USB to microUSB cable, and I actually needed to use a Samsung cable. Weird, right?
Click to expand...
Click to collapse
So...now that I'm rooted, how in the world do I install a custom rom? I saw that there's a ClockworkMod Recovery out, but what does "Odin" mean? I'm coming from an LG Optimus V and have extensive experience rooting and installing custom roms and recoveries, but I've never heard of that before. Thanks again!
First, we dont have much for custom roms on this phone. The couple we do have contain fairly well written "how-to's" for them.
Second, if you are not sure, do some research and find out as many answers with the vast pool of knowlendge at your fingertips (the interwebs) as you can. There has already been a swarm of questions asked, and I am sure the answers may already be there for you.
I am waiting for the update and Froyo roms to come out before I bother with custom roms, but I am not holding my breath for that. I will probably be on my next Android phone before I will bother. Modding it up with Widgetlocker, ADW Launcher, and some other goodies at the moment to tide me over.
I had this same problem today. USB mass storage wasn't working, adb wasn't working. I wasn't using the samsung cable, but I can't see how that would make a difference, as the cable I was using has worked for literally a couple dozen different phones from different manufacturers - including other samsungs. I had the samsung drivers installed.
The owner claims that only media sync works on his computer as well, and that usb mass storage has never worked. Anyone have any ideas on how to fix this?
i am also getting this problem. as far as i know i am still using the samsung cable, as normal micro-usb cables dont fit in the continuums port. ill look for another one, but this is quite odd. what i have done (all windows 7 64 bit):
drivers uninstalled
drivers installed
lagfix on
lag fix off
factory reset (within adrenalyne's rom)
i am going to try to transfer the stock rom via bluetooth and see if that works
edit: turns out that isnt possible without odi recognizing the device, which it doesnt (not even in download mode). this is very peculiar
some more information: nothing even shows up in device manager. no unknown devices, nothing. the phone charges, but thats it. i might go to the verizon store and see if i can get another cable
My guess is because you are using a 64 bit version of windows..
Sent from my SCH-I400 using XDA App
I use win7 x64 with odin3v1.3 and it always detects.... I have odin on pc screen with files loaded then I pull bat hold the DownVol button and plug in usb
EDIT: I also have 'galaxy s x64 drivers'...I found em on net sumwhere?
Sent from my SCH-I400 using XDA Premium App
jaizero said:
My guess is because you are using a 64 bit version of windows..
Sent from my SCH-I400 using XDA App
Click to expand...
Click to collapse
Why would that matter at all?
The 64bit version of Windows 7 is notorious for not being compatible with a lot of devices. There just arent any 64bit drivers. If you dont understand how to run your software in the proper compatibility mode you will run into problems. I used the x64 version of Win7 for about 12 seconds after I realized my ancient usb optical mouse didnt work lol.
My advice, try running the Samsung driver installer in compatibility mode and see if that doesnt help.
jaizero said:
My advice, try running the Samsung driver installer in compatibility mode and see if that doesnt help.
Click to expand...
Click to collapse
Compatibility mode won't do anything in the case of drivers. I'm not sure what your issue is though as all of my Samsung phones have been picked up fine from within Windows 7 x64. Is the phone picked up on any non-Windows 7 computer? Have you checked in Device Manager to see if it just needs installed?
its the cable. i took mine to the verizon store, they tested it, and gave me a new one for free. works perfectly now
Excellent, problem solved!
So it turns out a factory reset fixed it. Using a moto cable. So that's definitely not the issue. Flashing froyo now. Thanks!
I have encountered that a few times also. Its weird cuz when I plugged the usb into ac charger it almost immediately asks if I want to mount sd for data transfer. 20 mins later I unplug usb from unit and plugit into my win7 pc and nothin? So plugged back into ac unit and it recognize....so I mounted and it didn't know what to do lol. I then plugged back intopc...waited...changed orientation and 'Boom' pc sees it...in fact I change orientation whenever it seems to hang and seems to work....
sent from my XDA phone - its more than a continuum
I should also note that I have never used a samsung cable and every usb micro I've used (moto,kodak,BB,Lg) has fit and worked. But I have noticed some usb related quirks since froyo update like no lock screen after charging till I push home button, inaccurate batt icon (goes from 3/4 to 1/4 in like 10 mins but overall batt life is same as before)...
On an unrelated note I also can't get v6supercharger to work...?
sent from my XDA phone - its more than a continuum
My Nexus is stock but it is unlocked.
I have the latest CWM on there (touch 5.8.0.2)
I was currently downloading all the necessary stuff to flash to AOKP but havent even got there yet because all of the sudden my USB isn't working.
I have tried two different cables, the stock one and a different one (both which were working before).
I get charging working through USB but no file transfer.
I just did a wipe data/factory reset and wipe cache via Recovery, and still nada.
Am I cooked here? B-stock with no warranty from Expansys, now currently kicking myself for not buying brand new.
[edit] yes MTP and USB Debug were/are both checked on
[edit2] a lot of my searches seem to indicate that you can move and transfer via adb in recovery or fastboot while having this error. I am not finding that to be the case.
[edit3] windows 7 does not show any indication of a usb drive or anything plugged in as it used to before. This is obviously making it hard for me to try things like reinstalling drivers and whatnot.
thanks
It probably has nothing to do with the USB port...
Plug your phone into your computer, and then scroll the status bar down. You should see a notification "Connected as xx" Select that, then make sure connect as MTP is checked, if it's connected via ptp (camera) it won't allow you to sync files, for what reason so ever...
If that doesn't help, then reflash stock ROM, that usually helps.. With most problems anyway...
If both of these don't work, then I'm sorry, but I can't help you. I'd then call Samsung, and send it in...
LG Simon
Yea MTP was already checked on. USB debugging being on would have auto kicked in as well.
I flashed AOKP but still the same issues. The hardware might have gotten bonked - I hate how fragile these tiny little ports are!
Is there some kind of diagnostic I can run to see if it is truly a hardware issue?
It's the kernel, try another one
Sent from my Galaxy Nexus using xda premium
Just swapped to Faux kernel... still persists.
I'm really starting to think its the hardware but crossing my fingers there's a fix.
the same thing is happening to me, it started yesterday too!
I am on AOKP b-23, Faux kernel....
plug in my usb, it can charge but absolutely nothing happens on the computer side, try it on number of computers too... but the phone is able to charge.
EDIT:
try this:
http://forum.xda-developers.com/showthread.php?t=1400034
or this
http://forum.aokp.co/topic/29-aokp-faq-please-give-me-input-i-update-answers-many-times-a-day/
Mine started doing this. Would charge‚ but sometime I couldn't transfer data or use adb. It seems that the USB didn't like to stay in my computer. Any little movement would unplug it just enough to keep it charging but nothing else.
Sent from my Galaxy Nexus using Tapatalk
I've since tested the MHL cable and also tried using the usb host cable to connect a mouse and both work... does that mean my data connection theoretically could be fine?
I'm using AOKP #23 with Trinity and not had this issue at all. Whether it's because I combine the ROM, Gapps and kernel before flashing I don't know but my phone is running fine
im having this problem as well. does anyone have a solution?
So all you guys that are having problems have enabled MTP through Settings >Storage?
Sent from my Galaxy Nexus using xda premium
Had this same issue yesterday ( phone was 1 day old ) had it plugged into my windows 7 machine and all of sudden the machine couldnt see it. So I wiggled the cable sure enough the computer saw it, jiggled it again and it would lose connection to the PC. Tried this on several PCs with Several cables and same result everytime. If I held the cable connected to the phone at the right angle it would never lose connection.
Ran to Verizon and the numbskull behind counter tried telling me that is normal and I would just have live with it, almost punched him in the throat. Demaded he go get another phone and show me if that one does it. It didnt so he swapped it and was to hasty about it, ended up giving me another cable charger and headphones WOOT WOOT
new phone doesnt do it as of this writing
See http://forum.xda-developers.com/showthread.php?t=1427539 This is probably the issue you guys are experiencing. Seems like you should swap it in or try to fix it yourself by changing the USB charging board.
settings/ storage/ menu button/ usb computer connection/ MTP make sure mtp is checked
this worked for me
Sk00bs said:
settings/ storage/ menu button/ usb computer connection/ MTP make sure mtp is checked
this worked for me
Click to expand...
Click to collapse
i'm an android dev and this has happened to me. really really not good to no longer have adb access to my device. restarted both the phone and computer and tried a different coworker's computer and usb cable with no luck.
i used a samsung usb charger last night which i usually never do (i usually just charge it on the computer) and now this morning i have no data connection.
Hello,
have this problem already on my GNEX. After some reading, i got an idea to turn off Fast Charge in Trickster MOD.
And MTP now working .
Anyway there is an warning about fast charge - " Enabling this will disable access to phone storage" .
Problem solved
Yes, i can't connect mtp too and you rigth..usb fast charging is the problem.
Sent from my Galaxy Nexus using XDA Premium App
kymlalu said:
Hello,
have this problem already on my GNEX. After some reading, i got an idea to turn off Fast Charge in Trickster MOD.
And MTP now working .
Anyway there is an warning about fast charge - " Enabling this will disable access to phone storage" .
Problem solved
Click to expand...
Click to collapse
creco said:
Yes, i can't connect mtp too and you rigth..usb fast charging is the problem.
Sent from my Galaxy Nexus using XDA Premium App
Click to expand...
Click to collapse
Just so y'all know...Fast Charge is simply tricking your phone into thinking it's plugged into an AC outlet...rather than a USB port.
Thus MTP won't work.
same issue here
I'm having the same issue here. Charging works fine with 2 computers and multiple USB cables (as well as AC and car charger adapters), but data transfer has completely stopped working. My computer won't see my phone at all. I have the correct drivers (given that I used them to connect to my computer when I first rooted and unlocked the bootloader). Tried changing the drivers, but I can't get my phone to show up in Device Manager at all. MTP and USB Debugging are enabled.
The only thing I can think of is that I dropped my phone while it was connected, and now the USB cable only charges the phone if I bend it in a certain way (it usually requires upward pressure where the cable plugs into the phone to work). However, other USB charging cables work just fine without any pressure. Is there any chance that a new OEM Samsung USB cable might solve my problem? The other cables I've used weren't OEM.
I normally use a wi-fi data transfer app because the USB data transfer has been slow since day one, so that can be worked around. What IS a major problem for me is that I'm trying to re-root my phone after my root access was lost with the 4.0.4 OTA update. I didn't keep up with the news and only realized last week that my root access had been lost because I tried to do things that required root. Since the OTA update trashed my CWM recovery image, I seem to have no way to re-root and reinstall CWM aside from going back to my computer and doing what I did the first time. But if I can't connect to my computer, I can't do that. It also seems that I would need computer access to remove root in case I bring it back to Verizon for a replacement under warranty.
So on another note, if you guys know of a way to re-root my phone without connecting it to my PC, I'm all ears...
xfighter1188 said:
im having this problem as well. does anyone have a solution?
Click to expand...
Click to collapse
I have run into a lot of USB defects on the phones I have received. It might be wise to get Samsung to repair it, but you will be without a phone for a week. You could also try another cable.
I used to have similar issues except where the power got routed into the data port, frying my phone in multiple areas.
On Samsung's repair ticket they said REPLACED COMPONENT (I'm assuming this is the usb controller and port) this could be the solution but it requires sending it in.
Hi! I tried connecting my phone to my pc today and it wouldn't connect (and I don't see the notification on the phone). I tried with another other pc and different USB cables with no luck. Is there any solution to this ?
Thanks
modstorm said:
Hi! I tried connecting my phone to my pc today and it wouldn't connect (and I don't see the notification on the phone). I tried with another other pc and different USB cables with no luck. Is there any solution to this ?
Thanks
Click to expand...
Click to collapse
Try ever so carefully bending the usb port up towards the screen. Maybe with a tooth pich so you do not scratch anything. My SGS2 did this and after tweaking I had ZERO issues.
I just tried that it sometimes works now (rarely though ). I also noticed that the phone charges its just the MTP that isnt working
Same issue...
Went to root my Gsm gnex... Couldn't connect to the pc...
And now whenever I go into gallery it force closes... Could it be an issue with the internal storage?
wmdnc1990 said:
Same issue...
Went to root my Gsm gnex... Couldn't connect to the pc...
And now whenever I go into gallery it force closes... Could it be an issue with the internal storage?
Click to expand...
Click to collapse
Not sure I've had my phone rooted since the start of this year...I also reflashed a different ROM (full data wipe) so I don't think it's software related
modstorm said:
Not sure I've had my phone rooted since the start of this year...I also reflashed a different ROM (full data wipe) so I don't think it's software related
Click to expand...
Click to collapse
Is there any chance that you've got fast-charge enabled (say if you're running a kernel that allows it and some script starts it upon boot?)? If so, then USB Storage or MTP isn't going to work and isn't supposed to until you do this:
1) take it out of fast-charge mode (like with .. trickster mod or an "#echo 0 > /sys/.. {wherever it goes, have to google it},
2) unplug USB
3) plug it back in
4) hopefully it'll work if that was the problem.
Just a thought and it's happened to me. I use a script I wrote on boot to enable fast USB charge and another from userspace to disable fast charge so I can see the drive.
Good luck.
hachamacha said:
Is there any chance that you've got fast-charge enabled (say if you're running a kernel that allows it and some script starts it upon boot?)? If so, then USB Storage or MTP isn't going to work and isn't supposed to until you do this:
1) take it out of fast-charge mode (like with .. trickster mod or an "#echo 0 > /sys/.. {wherever it goes, have to google it},
2) unplug USB
3) plug it back in
4) hopefully it'll work if that was the problem.
Just a thought and it's happened to me. I use a script I wrote on boot to enable fast USB charge and another from userspace to disable fast charge so I can see the drive.
Good luck.
Click to expand...
Click to collapse
I use Trinity Kernel and I made sure fast charge is disabled. I even flashed from Rasbean to CM10 to make sure it isnt related to the Rom or kernel. I'm guessing it might have something to do with the usb port in the phone as sometimes it connects but disconnects after a while
Thanks anyways
modstorm said:
I use Trinity Kernel and I made sure fast charge is disabled. I even flashed from Rasbean to CM10 to make sure it isnt related to the Rom or kernel. I'm guessing it might have something to do with the usb port in the phone as sometimes it connects but disconnects after a while
Thanks anyways
Click to expand...
Click to collapse
Ah well, too bad. I guess if you need to get to your PC and don't mind reduced speeds, you could always use a cifs (common internet file system) aware kernel, (faux or air I think, maybe more), then use cifsmanager to mount whatever PC share you like and transfer over the air for now.
hachamacha said:
Ah well, too bad. I guess if you need to get to your PC and don't mind reduced speeds, you could always use a cifs (common internet file system) aware kernel, (faux or air I think, maybe more), then use cifsmanager to mount whatever PC share you like and transfer over the air for now.
Click to expand...
Click to collapse
Or use ADBWiFi
Connect with:
Code:
adb connect ip:port
(Given via the App)
Also...post three of my guide ↓Has a return to stock and locked guide if you need to get a warranty exchange.
I have this issue with one of the many cables from replacements that i got. Its weird because like you said it charges but it doesn't connect. And I've noticed that if I use that cable to charge my phone it takes for ever to charge. But if I use one of the others it charges like a lightning striking the ground
Sent from my Galaxy Nexus using xda app-developers app
just not your case but if you have a pattern lock might not recognize your phone. Try setting the pattern of sliding
checked driver installation on both PC's ????
hardware issue?
I did some research and came to conclusion that it is most likely a hardware issue. I had tried bending the pin inside the USB port but that didn't do the trick for me and seems to be a rather unreliable solution. I found a guide to replace the port yourself on ifixit. Since I don't own the tools and am not very good in repairing those things myself I had mobiletechvideos do it for me (i'm not allowed to post a link but you'll find it by googling for it).
It's a fair price for not having to do it myself and risking serious damage to the device. I got my phone back after 9 days and since then it has been working like a charm.
Anyway, it sucks that the micro usb port is that fragile and got damaged so easily in the first place.
I had connect problem and everyone kept saying i needed to install drivers and sending me to toolkits. I KNEW drivers installed. Turned out to be the usb inf file in sdk only had nexus one, ns4g, and the 7 wrote in. I copied the gnex info to the file and rebooted computer. Worked perfectly. Didn't even get the new hardware popup.
*Shaolin Shadowboxing*
I've been using trinity and noticed that sometimes it doesn't recognize the USB when plunged in after it's been up for awhile... Something happens when it's been on for awhile I don't know if it is fast charge related or not..
My solution... reboot the phone with the USB plugged in.. works EVERYTIME...
About 2 weeks ago my phone started having issues with the microSD card. I was plugging it into my computer off and on trying to get the card to read. Then one time the computer just stopped recognizing the phone. Since then I haven't been able to get any computer to recognize my phone. I plug it in and no MTP / PTP options show up, nothing in the system tray to indicate I have attached a new USB device. It just charges the phone.
Phone info:
Samsung SGH-i747m
Android version 4.2.2
Baseband version I747MUMLL1
Kernel Version 3.4.37-cyanogenmod-g7b457dc
What I've tried:
Uninstalled and reinstalled drivers
Every USB port on the box
Factory data reset--both from the setup menu, and the diagnostic bootup menu
USB debugging mode, both on and off.
Changing the UART and USB settings in the *#7284# PhoneUtil. After my last factory reset, it's set to PDA/MTP+ADB.
3 different computers, one Win 7 64 bit, one, one Win 7 32 bit, one Win XP SP3
about 5 different USB cords
I tried a touchwhiz rom CSROM
Cleaning the USB connector with a pin / air can
Changed the Kernal
Anything else I should try? Is there a way to determine if the USB plug on the phone is bad?
AverageCanadian said:
About 2 weeks ago my phone started having issues with the microSD card. I was plugging it into my computer off and on trying to get the card to read. Then one time the computer just stopped recognizing the phone. Since then I haven't been able to get any computer to recognize my phone. I plug it in and no MTP / PTP options show up, nothing in the system tray to indicate I have attached a new USB device. It just charges the phone.
Phone info:
Samsung SGH-i747m
Android version 4.2.2
Baseband version I747MUMLL1
Kernel Version 3.4.37-cyanogenmod-g7b457dc
What I've tried:
Uninstalled and reinstalled drivers
Every USB port on the box
Factory data reset--both from the setup menu, and the diagnostic bootup menu
USB debugging mode, both on and off.
Changing the UART and USB settings in the *#7284# PhoneUtil. After my last factory reset, it's set to PDA/MTP+ADB.
3 different computers, one Win 7 64 bit, one, one Win 7 32 bit, one Win XP SP3
about 5 different USB cords
I tried a touchwhiz rom CSROM
Cleaning the USB connector with a pin / air can
Changed the Kernal
Anything else I should try? Is there a way to determine if the USB plug on the phone is bad?
Click to expand...
Click to collapse
What ROM are you using? Not stock obviously running 4.2.2
Make sure fast charge isn't selected. You can't use USB with fast charge enabled. There is either quick tile setting for it (aokp) or under performance settings or in ktweaker.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Is your USB port open? Example: at my office desk, USB only charges but does not allow devices to connect.
Sent from my SAMSUNG-SGH-I747 using xda premium
KorGuy123 said:
What ROM are you using? Not stock obviously running 4.2.2
Make sure fast charge isn't selected. You can't use USB with fast charge enabled. There is either quick tile setting for it (aokp) or under performance settings or in ktweaker.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply. I've tried about 5 different roms, some touchwiz some not. Haven't gone back to stock yet though.
However I went back to a AOKP rom, Tasks650. Haven't been able to find the usb charge toggle button yet but I may have a kernal not compatible with it. However when I plug the phone into my computer and look at the Battery is says I'm on AC charge so that is likely a good place to start looking for a solution.
Thanks again.
diablo009 said:
Is your USB port open? Example: at my office desk, USB only charges but does not allow devices to connect.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
yeah, I've used the port before these issues started and it still works with my Galaxy Nexus.
AverageCanadian said:
Thanks for the reply. I've tried about 5 different roms, some touchwiz some not. Haven't gone back to stock yet though.
However I went back to a AOKP rom, Tasks650. Haven't been able to find the usb charge toggle button yet but I may have a kernal not compatible with it. However when I plug the phone into my computer and look at the Battery is says I'm on AC charge so that is likely a good place to start looking for a solution.
Thanks again.
Click to expand...
Click to collapse
If plugged into USB it says ac charge than fast charge is enabled. That's what it does. Goto setting and find the sub menu for the quick setting tiles. There will be one for fast charge. You select it, drag down your quick tiles and you can select and deselect it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
AverageCanadian said:
yeah, I've used the port before these issues started and it still works with my Galaxy Nexus.
Click to expand...
Click to collapse
Faulty cord. Go on amazon or order another one. I use a heavy duty one from mediabridge for $5 and it does data and charging. Many times over the years I get an OEM micro usb cord that charges all 3 different galaxy S models I have then after use it will work on 2 and then only one. Sometimes it will just charge and not work with data transfer.
I highly doubt it's your phone.
I saw you tried different cords but were they new ? A picky microUSB or one that's more worn out might only work with a certain cord.
You can replace the microUSB port and it's cheap and I assume there a video on youtube for it but off course it's up to you.
KorGuy123 said:
If plugged into USB it says ac charge than fast charge is enabled. That's what it does. Goto setting and find the sub menu for the quick setting tiles. There will be one for fast charge. You select it, drag down your quick tiles and you can select and deselect it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Downloaded a new version of Task650 and enabled fast charge, reset the phone and then disabled it and reset the phone again. Same issue. PC does not recognize the phone but it charges. Check battery and says its on 'AC' charge. I wonder if somehow the two middle pins on the phone got shorted out so it permanently thinks its on AC charge?
hednik said:
Faulty cord. Go on amazon or order another one. I use a heavy duty one from mediabridge for $5 and it does data and charging. Many times over the years I get an OEM micro usb cord that charges all 3 different galaxy S models I have then after use it will work on 2 and then only one. Sometimes it will just charge and not work with data transfer.
I highly doubt it's your phone.
I saw you tried different cords but were they new ? A picky microUSB or one that's more worn out might only work with a certain cord.
You can replace the microUSB port and it's cheap and I assume there a video on youtube for it but off course it's up to you.
Click to expand...
Click to collapse
Yeah, I just got 10 new microUSB cords to the house. They are cheap ones. However I tried a few other ones I have around the house. I don't know if any of them are the original Samsung cords but I certainly have original HTC microUSB cords. I've probably tried about 14 different ones in total now. I don't think its the cord.
I am in the same boat , my phone works perfect on Win 7 but not on Win XP.
I use airdroid or mmc adapter only if needed.
I did try a web link to fix the mtp issue ( before my xp pc was refomated ) and have had the phone recognized as a USB drive , can't find the link anymore. It has something to do with windows media player .
If I find something , I will report back.
Sent from my SGH-I747 using Tapatalk 2
AverageCanadian said:
Downloaded a new version of Task650 and enabled fast charge, reset the phone and then disabled it and reset the phone again. Same issue. PC does not recognize the phone but it charges. Check battery and says its on 'AC' charge. I wonder if somehow the two middle pins on the phone got shorted out so it permanently thinks its on AC charge?
Yeah, I just got 10 new microUSB cords to the house. They are cheap ones. However I tried a few other ones I have around the house. I don't know if any of them are the original Samsung cords but I certainly have original HTC microUSB cords. I've probably tried about 14 different ones in total now. I don't think its the cord.
Click to expand...
Click to collapse
Warranty exchange ? If it is the port.... It won't get better. I'd exchange or try a swap
likonvampire said:
I am in the same boat , my phone works perfect on Win 7 but not on Win XP.
I use airdroid or mmc adapter only if needed.
I did try a web link to fix the mtp issue ( before my xp pc was refomated ) and have had the phone recognized as a USB drive , can't find the link anymore. It has something to do with windows media player .
If I find something , I will report back.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
On your windows XP device, download the newest version of Windows Media player. That always got it working for me.
I have this same issue now. Is WMP update really the issue here?
AverageCanadian said:
About 2 weeks ago my phone started having issues with the microSD card. I was plugging it into my computer off and on trying to get the card to read. Then one time the computer just stopped recognizing the phone. Since then I haven't been able to get any computer to recognize my phone. I plug it in and no MTP / PTP options show up, nothing in the system tray to indicate I have attached a new USB device. It just charges the phone.
Phone info:
Samsung SGH-i747m
Android version 4.2.2
Baseband version I747MUMLL1
Kernel Version 3.4.37-cyanogenmod-g7b457dc
What I've tried:
Uninstalled and reinstalled drivers
Every USB port on the box
Factory data reset--both from the setup menu, and the diagnostic bootup menu
USB debugging mode, both on and off.
Changing the UART and USB settings in the *#7284# PhoneUtil. After my last factory reset, it's set to PDA/MTP+ADB.
3 different computers, one Win 7 64 bit, one, one Win 7 32 bit, one Win XP SP3
about 5 different USB cords
I tried a touchwhiz rom CSROM
Cleaning the USB connector with a pin / air can
Changed the Kernal
Anything else I should try? Is there a way to determine if the USB plug on the phone is bad?
Click to expand...
Click to collapse
I've been having the exact same problem with my Note II - couldn't get my PC to recognise the SD card but it would charge.
However, then it stopped charging my phone, too. I naturally assumed it was the USB port or the lead, but having tried four different leads - all tested on my wife's SII and all working fine - I realised it was something else.
So I swapped in the spare battery I have and that did charge; swapped back to the old battery and that charged, too.
Weird...but OK, phone is working again.
Next day, no charging again.
Swapped batteries - no change.
Swapped batteries back - no change.
Reflashed ParanoidAndroid ROM - no change.
Flashed Samsung base ROM - no change.
Flashed ParanoidAndroid again - batteries start to charge on USB and on wall charger.
WTF????
Two days later (yesterday) - batteries no longer charge. I'm having to use an external battery charger that plugs into the walls (take the battery out of the phone, plug into the charger, leave to charge).
I've tried different kernels (Devil, NEAK), leads, batteries - nothing.
It's just goddamn weird - and a real pain. :crying:
Sounds like I would start with warranty for the batteries. Stranger things have happened because of batteries. On the inspire, when a battery would start going bad the phone would reboot when trying to take a photo with the flash on.
AverageCanadian said:
About 2 weeks ago my phone started having issues with the microSD card. I was plugging it into my computer off and on trying to get the card to read. Then one time the computer just stopped recognizing the phone. Since then I haven't been able to get any computer to recognize my phone. I plug it in and no MTP / PTP options show up, nothing in the system tray to indicate I have attached a new USB device. It just charges the phone.
Phone info:
Samsung SGH-i747m
Android version 4.2.2
Baseband version I747MUMLL1
Kernel Version 3.4.37-cyanogenmod-g7b457dc
What I've tried:
Uninstalled and reinstalled drivers
Every USB port on the box
Factory data reset--both from the setup menu, and the diagnostic bootup menu
USB debugging mode, both on and off.
Changing the UART and USB settings in the *#7284# PhoneUtil. After my last factory reset, it's set to PDA/MTP+ADB.
3 different computers, one Win 7 64 bit, one, one Win 7 32 bit, one Win XP SP3
about 5 different USB cords
I tried a touchwhiz rom CSROM
Cleaning the USB connector with a pin / air can
Changed the Kernal
Anything else I should try? Is there a way to determine if the USB plug on the phone is bad?
Click to expand...
Click to collapse
I Managed to fix the "Usb not detecting with PC when you connect it but only charges the phone. With me it was a software problem because it happened after i installed the new firmware. what i did was root my phone using Framaroot 1.4. its a apk application, then i installed Titanium Backup. went into titanium backup then to the MTP application and backed it up. then i restored it +all date,. plugged my phone in with the pc and it worked.
Mine turned out to be a software problem, too. I moved to the Beanstalk ROM and that fixed it, weirdly.
I've changed ROMs since (PACMan and SlimBean) and everything's still fine...
Try This
stupc said:
Mine turned out to be a software problem, too. I moved to the Beanstalk ROM and that fixed it, weirdly.
I've changed ROMs since (PACMan and SlimBean) and everything's still fine...
Click to expand...
Click to collapse
[Answer]
By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, Somehow it changed. I found this on a forum - it seems a few other folks declared it a success.
1.Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!)
2.When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
3.At the bottom there is a button that says Qualcomm USB. Click on it.
4.In that menu click on MTP + ADB option.
5.Save and reset.
6.Wait for your phone to restart.
7.Plug the micro USB cable to the Note 2 and the the other end to your PC or Mac
8.Let your computer down load and install drivers.
9.Once installing is done, unplug then replug phone.
10.There should be a USB symbol on your phone in the status bar - click on it. It should ask if you wsnd to use mtp or ptp. Click MTP
11.At this point your PC should open the phone’s folders in explorer.
12.You may have to repeat this process a few times....it worked for me after 4 tries.
Remember, you do not need to use Kies or root your phone for this to work and you should not have to fiddle with manually installing and downloading drivers in Windows 8, it should work no problem as is.
Good luck!
Hello,
I hope someone can help. I am trying to get my computer to recognise my phone. I am not rooted and I have Marshmellow 6.0.1
I unlocked developer options. I bought a cable and it worked! The computer saw my phone. However it stopped seeing my phone. Why I don't know! But when it did work I saw the driver was not for the 5x but from my S4. Well since it's not working I ordered the recommended USB cables by Benson Leung Tech Matte. Still unable to see my phone. Tried cables on another computer with same results. The computer I tried it on recognised my phone and then it also stopped seeing my phone.
I also bought a usb c stick to use on my phone. My phone responds to the stick but when I choose for MTP from charging nothing happens and i cannot access the USB Stick. In Dev options MTP is selected. I also noticed that USB tethering is not available. I have no clue what to try next.
packtack1 said:
Hello,
I hope someone can help. I am trying to get my computer to recognise my phone. I am not rooted and I have Marshmellow 6.0.1
I unlocked developer options. I bought a cable and it worked! The computer saw my phone. However it stopped seeing my phone. Why I don't know! But when it did work I saw the driver was not for the 5x but from my S4. Well since it's not working I ordered the recommended USB cables by Benson Leung Tech Matte. Still unable to see my phone. Tried cables on another computer with same results. The computer I tried it on recognised my phone and then it also stopped seeing my phone.
I also bought a usb c stick to use on my phone. My phone responds to the stick but when I choose for MTP from charging nothing happens and i cannot access the USB Stick. In Dev options MTP is selected. I also noticed that USB tethering is not available. I have no clue what to try next.
Click to expand...
Click to collapse
USB debugging needs to be selected. Also, you need to toggle to PTP and back to MTP
Install correct drivers onto your pc
https://userscloud.com/niz9jnon5ooz
Or
https://www.androidfilehost.com/?fid=24052804347829096
Tulsadiver said:
USB debugging needs to be selected. Also, you need to toggle to PTP and back to MTP
Install correct drivers onto your pc
https://userscloud.com/niz9jnon5ooz
Or
https://www.androidfilehost.com/?fid=24052804347829096
Click to expand...
Click to collapse
Thanks for the drivers. USB Debugging is on. When I toggled Charging popped up instead of PTP and so I kept toggling and it finally went to PTP and so I toggled MTP and it goes back to charging! So I kept at it until it finally went to MTP. Is this normal? I counted 12 tries before changing from charging to PTP! But the computer doesn't see the phone. I did it a few times
packtack1 said:
I also bought a usb c stick to use on my phone. My phone responds to the stick but when I choose for MTP from charging nothing happens and i cannot access the USB Stick. In Dev options MTP is selected. I also noticed that USB tethering is not available. I have no clue what to try next.
Click to expand...
Click to collapse
i honestly never thought about this, is this even supposed to work without some kind of an OTG adapter. i mean sure, the plugs fit, put do the pins match/work for that configuration?
from how you describe that your phone reacts i would guess it doesn't, and it sounds more like your phone goes into client, as opposed to host mode.
very interested to see what someone with more knowledge of the matter would have to say about plugging a usb-c memory stick directly into your phone.
Broken303 said:
i honestly never thought about this, is this even supposed to work without some kind of an OTG adapter. i mean sure, the plugs fit, put do the pins match/work for that configuration?
from how you describe that your phone reacts i would guess it doesn't, and it sounds more like your phone goes into client, as opposed to host mode.
very interested to see what someone with more knowledge of the matter would have to say about plugging a usb-c memory stick directly into your phone.
Click to expand...
Click to collapse
I can read/write to a sandisk USB memory stick using the proper adapter and using USB OTG file manager for Nexus from the play store.
---------- Post added at 05:53 PM ---------- Previous post was at 05:45 PM ----------
packtack1 said:
Thanks for the drivers. USB Debugging is on. When I toggled Charging popped up instead of PTP and so I kept toggling and it finally went to PTP and so I toggled MTP and it goes back to charging! So I kept at it until it finally went to MTP. Is this normal? I counted 12 tries before changing from charging to PTP! But the computer doesn't see the phone. I did it a few times
Click to expand...
Click to collapse
I've used several phones on my PC and at first it had a little trouble but finally settled in. Kind of like a new ROM. You have to give it a while to settle in and get its groove on.
Tulsadiver said:
I can read/write to a sandisk USB memory stick using the proper adapter and using USB OTG file manager for Nexus from the play store.
Click to expand...
Click to collapse
not really a surprise there, but what OP described was putting a usb-C stick directly into the phone, without any cables or adapters in between, with the question emerging if that is even supposed to work (which in his case didn't) due to possible problems of the pin-layout, etc.
Tulsadiver said:
I've used several phones on my PC and at first it had a little trouble but finally settled in. Kind of like a new ROM. You have to give it a while to settle in and get its groove on.
Click to expand...
Click to collapse
that does not explain his PC suddenly not recognizing his phone anymore though.
at this point it sounds to me like either there still is a driver issue (e.g. the mentioned S4 driver wan't properly uninstalled), or one of the usb ports (phone or pc) has an issue.
try different ports on your PC and make sure other devices work with the ports. if not try if you can get it to work by applying a little pressure in different directions to the cable and listen out for windows' annoying usb sound.
on the other end make sure your phone really is connected correctly to the cable. it should snap in just like the OEM charging cable which took some time getting used to to overcome the resistence of the usb-c port.
Tulsadiver said:
I can read/write to a sandisk USB memory stick using the proper adapter and using USB OTG file manager for Nexus from the play store.
---------- Post added at 05:53 PM ---------- Previous post was at 05:45 PM ----------
I've used several phones on my PC and at first it had a little trouble but finally settled in. Kind of like a new ROM. You have to give it a while to settle in and get its groove on.
Click to expand...
Click to collapse
Thanks again for your quick reply,
I tried my Samsung Tab II tablet and my old S4 on my PC and they both work as advertised. Recognised right away and I hadn't used my tablet to my PC before. What I think is maybe its the USB on the phone itself?
Broken303 said:
not really a surprise there, but what OP described was putting a usb-C stick directly into the phone, without any cables or adapters in between, with the question emerging if that is even supposed to work (which in his case didn't) due to possible problems of the pin-layout, etc.
that does not explain his PC suddenly not recognizing his phone anymore though.
at this point it sounds to me like either there still is a driver issue (e.g. the mentioned S4 driver wan't properly uninstalled), or one of the usb ports (phone or pc) has an issue.
try different ports on your PC and make sure other devices work with the ports. if not try if you can get it to work by applying a little pressure in different directions to the cable and listen out for windows' annoying usb sound.
on the other end make sure your phone really is connected correctly to the cable. it should snap in just like the OEM charging cable which took some time getting used to to overcome the resistence of the usb-c port.
Click to expand...
Click to collapse
I think its the phone itself, since it did work briefly. Also with the USB C thumb drive the phone recognises it but will not read the thumb drive. I ordered it from play store I wonder how getting it repaired/looked at is going work Have to wait until Monday to call!
Hello again,
I Hope you guys like some feedback about my issue. Contacted Google and they asked me just about all the same questions and had me do some screen shots and try some of their ideas such as factory reset, trying other computers and other cables. Nothing worked so they sent me a new phone! Just got it yesterday. Would have been here sooner but I was busy!
So got new phone setup and the computer recognizes my phone on PTP but not MTP. Also my driver for the phone is a generic nexus and the it still shows up as a samsung! How can I get the new driver if when i do a search for new driver my computer says I have the best driver already installed? I don't want the driver to still be a problem. So i hope you guys have some answers. Lol! I know you guys do!!
packtack1 said:
Hello again,
I Hope you guys like some feedback about my issue. Contacted Google and they asked me just about all the same questions and had me do some screen shots and try some of their ideas such as factory reset, trying other computers and other cables. Nothing worked so they sent me a new phone! Just got it yesterday. Would have been here sooner but I was busy!
So got new phone setup and the computer recognizes my phone on PTP but not MTP. Also my driver for the phone is a generic nexus and the it still shows up as a samsung! How can I get the new driver if when i do a search for new driver my computer says I have the best driver already installed? I don't want the driver to still be a problem. So i hope you guys have some answers. Lol! I know you guys do!!
Click to expand...
Click to collapse
If you had a samsung phone before you need to uninstall all the samsung drivers then install the proper nexus drivers
I was a little worried about uninstalling the driver but it worked!! Thanks! Now i can root it!!
metpage said:
If you had a samsung phone before you need to uninstall all the samsung drivers then install the proper nexus drivers
Click to expand...
Click to collapse