[Q] ODIN wont recognize my phone - Sprint Samsung Galaxy S III

This is my second post regarding the topic, the first had no replies so I thought I'd rephrase it and narrow it down.
I got my phone about 3 weeks ago. Installed a new ROM, didnt like it so I switched to mrRobinson's "ATT Stock + root" ROM. It was working great. All of a sudden the USB connection no longer works for data. I can plug it in and it charges, however windows doesnt recognize it as connected. I even tried ODIN and it did not see it. I've tried it on 2 PC's, different cables, and reinstalled drivers on both machines, still nothing. I asked about this on a couple of forums and heard no responses at all, out of desperation I downloaded via the airwaves some ATT update hoping it would fix it. All it did was unroot it.
The last time the USB worked, I was using it to xfer a bunch of files over. I was running out of time so I cancelled the copy and unhooked the phone (perhaps too soon?!?). The external 32GB SD Card was initially not recognized (however I tried a 2GB card and it worked). My battery died over the weekend and after I charged it up it started reading the 32GB SD card again. I thought the USB would work too, but it didnt. PLEASE HELP!
I also installed ADB and tried to do adb reboot, it said "error: device not found".
Everything else in the phone works fine. I have no other issues except for the USB one. Any ideas? I will PayPal you $10 if you can solve my problem (unless its hardware of course!). This is frustrating. Is there some setting I flipped?

I had similar issues. Try unticking USB debugging, plug it in and see if your storage pops up or if drivers start to install. Unplug and turn debugging back on and plug in. If still no adb, leave it plugged in and go to device manager and see if it recognizes the phone as anything. It may show ur phone with a yellow exclamation and if so right click and update drivers. if nothing works try a factory reset and try again. Hope this helps!!
Sent from my SPH-L710 using xda premium

You may want to check with a magnifying glass to see if anything in the port is bent; I've seen a few posts where the cable was taken out kind of abruptly and tweaked the usb port.

Thank you all for the help... I fixed it.
I had to leave the battery out of the phone and let the memory reset. It must have been something that was stuck in there. I am dontating $5 to a lucky developer (they didnt help me with the problem, just wanted to give back to the community).
I had noticed that initially it wasnt reading the 32GB SD Card, it did read a 2GB SD I had lying around.... The phone eventually ran out of juice and after I charged it the SD card was recognized. I imagine it had something to do with something in memory after that happened. I was talking with a coworker and he mentioned taking the whole battery out. I had done that before, but only for a few minutes, this time I left it out for 30min.
I plugged it back in and viola! everything was working.
Hope this helps someone else.

Related

USB to PC

Ok. For some reason today when I plug my phone to my PC nothing is happening. Nothing on the phone or computer. It is charging so nothing is wrong. I checked the settings and I didn't see anything out of wack. It didn't happen last night. Usually when I plug it up a notification comes up on my phone and a pop up on my PC. Neither has happened. Anyone know a solution?
i was wondering the same thing at one point and one member(i think it nobreak) informed that it was due to miguels overclock kernel...hope this helps. but you can always boot into recovery and mount sd card, that still works.

[Q] Cant mount USB, get to DL mode

Hi Guys/Gals
ive done a bit of searching and have tried everything i could think of but still no DL mode, and cant mount USB
I started having a problem with my mic ... thought it might be the ROM so i wiped dalvik, problem was still there. Then did a factory reset, problem still there
Thought i would try a different ROM, but when i went to plug my USB in, my PC would promt me with a USB device not recognized window. I tried mounting USB via USB utilities - No Go. Tried with debugging mode off, still no go.
I have reinstalled the USB drivers, still no go.
The phone also turns on when plugged into wall power, or will not stay shut down ... hrmmm
Im curious if the mic and USB issues are related and it is a hardware malfunction.
Any tips, help, or advice would be GREATLY appreciated right about now.
Thanks XDA!
Welp ... got DL mode on my work PC. Will try to get back to factory and see if that resolves the USB and Mic issues.
Pretty weird considering I tried it a few million times.
Scratch that. Got DL mode, once, can no longer. Wtf is going on.
Holding volume+/- and inserting USB cable. Am I doing something wrong? Its sending me straight to CWM recovery everytime.
Tried to do a restore from a point but got an MD5 sum mismatch
FFFFFFUUUUUUUUUUUUUUU
Sent from my SGH-T989 using XDA App
turn off phone
plug in usb
then reboot with finger combo
Problem is I plug in USB when the phone is pwrd off and it automatically starts to boot up.
Sent from my SGH-T989 using XDA App
street954 said:
Problem is I plug in USB when the phone is pwrd off and it automatically starts to boot up.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
so hold the vol up + down then plug phone
Tried everything.
Not a newb when it comes to getting to DL mode if the phone is opperating normally. (obviously if ive come from CM7, and ICS as an original vibrant owner, and was running a rooted SGS2)
Went ahead and ordered a new phone. Am going to spend the couple bucks on the DL mode USB plug, might be able to save something from the old phone.
Im pretty sure something happened to the phone that affected the ports on the USB and MIC at the same time. But we'll see once i try the plug ...
street954 said:
Tried everything.
Not a newb when it comes to getting to DL mode if the phone is opperating normally. (obviously if ive come from CM7, and ICS as an original vibrant owner, and was running a rooted SGS2)
Went ahead and ordered a new phone. Am going to spend the couple bucks on the DL mode USB plug, might be able to save something from the old phone.
Im pretty sure something happened to the phone that affected the ports on the USB and MIC at the same time. But we'll see once i try the plug ...
Click to expand...
Click to collapse
wait have one last idea
if you have adb set up type in adb reboot download

USB not detected. Urgent Help.

Okay before yall rage at me, I already search XDA+Google. I think I found some answers to it, but there seems to be some confusion about my problem...So I wanna ask you guys DHD/I4G users.
My problem is that when I connect my phone to the computer, my phone doesnt detect USB anymore. this happened way back before, but somehow it worked again.
I have 3 new different USB Data Cables. I tried all three of them to see if it was my MAIN USB Cable Data that was broken. It wasnt.
I tried connecting it to 2 other computers in my house and still no luck.
So when I was searching, people said that this problem can be from...
-hardware problem(broken) (but i dont think its broken cause my phone is still able to charge.)
-rom with bad download.
And there were some suggestions to what I should do...
-super wipe your phone and re-install a new rom
-take the micro sd put it in your computer format the SD card.
-take battery out for 30 seconds then put it back in.
-return to stock
-reinstall HTC drivers
however all those methods did not work at all.
The thing is my phone still charges on whatever USB or Computer I plug it into.
Also, this problem happened to me awhile back but somehow it was fixed..IDK how I did it.
Also sometimes, my computer detects it, but it says "something has malfunctioned).
my phone has never got in contact with any form of liquid. but what i think has touched my phone is heat or sweat from my pants.
Edit: also, I never dropped my phone before.
Is this a hardware problem? because as I said it before this happened to be awhile back but I was able to get USB detected to my computer again.
Can anyone give me more methods/information on how or what I should do to fix it?
Phone details
- Device: Inspire 4g
- Rom: Aospx BR7
- default Ril from the rom
- radio : in my signature
- phone about 1 and half years old
It seems you have already ruled out software and cable/computer issues. It is possible for a device to have intermittent failure. Sounds like a bad sd reader. Charger runs seperate from that.
Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave
zelendel said:
Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave
Click to expand...
Click to collapse
I tried on three different computer which all are Windows 7 32 and 64 bits.
EDIT: somehow when I plugged it in my computer, it detected for few seconds then turned off.
Have you tried cleaning your phones port?
marsdta said:
Have you tried cleaning your phones port?
Click to expand...
Click to collapse
ummmm all I did was just blow on it(sounds wrong, LOL).
oh yeah and also, i always hear that sound when you connect any USB into the computer. that beeping noise. but only when I reboot my phone.
I could always transfer files by using the Micro SD Adapter, but thats too much work. taking my phone case out, taking out the bottom part, taking out usb, putting it in the adapater, then in the computer....-_-
update.
I kind of found a solution?? if i can take any step further...
So I changed my rom to a sense 4 rom(virtuous). I disabled Fast Boot from there. Now my computer detects my phone but it gives me the notification saying that my device cant be recognized.
U can use software data cable app its free .. and u can nove data between phone n pc wirelessly as long as you are in the same network ...
Sent from my Desire HD using xda app-developers app

Device can no longer see computers, need some help figuring things out.

Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
VasVadum said:
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
Click to expand...
Click to collapse
First off, after the factory reset and everything worked did you reinstall the pdanet?
Second, 20,000mah battery? Holy cow im jealous!
Forgive me if you have already tried these things but this is what i would do...
Did you reenable developer options and reenable adb debugging?
Did you uninstall and reinstall your phone drivers?
Is there an updated phone driver?
Have you tried a different usb cord?
Is there excess dirt or dust in usb charge port on your phone?
Does your usb charge port even work anymore or do you just charge external battery on wall?
Have you tried a different usb port on the computer?
Have you tried on another computer?
Have you tried updating computer drivers?
Have you enabled a fast charge tweak like on a kernel tweak app?
If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Let me know what worked please! Good luck!
ZipAddict said:
1. First off, after the factory reset and everything worked did you reinstall the pdanet?
2. Second, 20,000mah battery? Holy cow im jealous!
3. Did you reenable developer options and reenable adb debugging?
4. Did you uninstall and reinstall your phone drivers?
5. Is there an updated phone driver?
6. Have you tried a different usb cord?
7. Is there excess dirt or dust in usb charge port on your phone?
8. Does your usb charge port even work anymore or do you just charge external battery on wall?
9. Have you tried a different usb port on the computer?
10. Have you tried on another computer?
11. Have you tried updating computer drivers?
12. Have you enabled a fast charge tweak like on a kernel tweak app?
13. If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Click to expand...
Click to collapse
1. No, I never touched PDA net again.
2. Too bad forum rules say I can't be friendly and give you the link to it.
3. Read the topic you quoted. I did, only after my phone broke again. Except it's not adb debugging, it's USB debugging. Doesn't work, because the phone can't communicate with a computer anymore.
4. 5. 11. Yes I reinstalled drivers and no there were no updates.
6. 7. Nothing's wrong with the cable. I did try with others.
8. What does that even mean? Yes my phone's port works. Nothing's wrong with any hardware.
9. 10. I've tried different ports and different computers.
12. Can't, phone isn't rooted.
13. I'm not using this. My phone is not there for Google/Android to tell me I'm not allowed to use my USB port ever again. I'm also not going to wait 4 hours for a 4 GB file to transfer via my router to my computer nor am I installing some app software to my computer just to have wireless transfer. This is not a work around. This is an "Oh well, it's broken, guess you can't ever use USB ports again for data access!"
note; I tried all of these (except 12/13) before I ever came here looking for help.
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
ZipAddict said:
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
Click to expand...
Click to collapse
2. amazon dot com /External-20000mAh-Limefuel-LP200X-Flashlight/dp/B00OHZVN5U/ - It let me charge my phone 7-8 times fully before it was empty. Automatically stops when your phone is full.
3. USB debugging doesn't need to be on in order for a phone to communicate with a computer. This is only if you want to debug apps or use other developer tools. File transfer works just fine without it.
8. I still don't understand what you mean. My phone is not broken in any way. Nor is my battery. My external battery charges off any USB input, my phone charges off any USB input. My phone just can't communicate data wise between devices anymore via USB.
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off. All "kernal tweak apps" appear to require root. The top 5 google searches shown this.
3. Wasnt sure. Ive always had it on
8. Some aftermarket batteries dont charge while in phone hooked up to charger. They come out of phone and into specialized charger for battery only not phone with it, so that it can charge the larger battery in a matter ofan hour or so is what i have been trying to say. But its obvious thats not the case for you now since i asked and clarified. If this was the case one might not know that the small usb port on their phone needed cleaning to make a good connection because they literally dont use it to charge their phone. They charge their phone with external battery charger. You see?
12. On my custom rom and on my trickstermod app it does say fast charge disables data communication and that you have to turn it off for computer to recognize phone again. This fast charge mode only works when connected to computer not wall charger it says
Wish i could be more help but im out of ideas. Good luck
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
VasVadum said:
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off.
Click to expand...
Click to collapse
this was your problem remember? fast charge does disable data communication.
VasVadum said:
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
Click to expand...
Click to collapse
glad whatever you did fixed it lol. have a good day
ZipAddict said:
this was your problem remember? fast charge does disable data communication.
glad whatever you did fixed it lol. have a good day
Click to expand...
Click to collapse
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
VasVadum said:
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
Click to expand...
Click to collapse
The way u said it i misunderstood i thought u did have it on. Its not an option on all roms though. Mine has it and i tried it and couldnt see files thru usb until i toggled it off so it was just an idea. I dont know the effects of the low battery dump off top of my head but i will remember that if i hear someone else with same problem. Glad its fixed now

Galaxy Tab 3 8.0 (SM-T310) won't power on, can't fix it. Can anyone help me?

Hi,
I have the SM-T310 Galaxy Tab 3 8.0 variant with stock android 4.4.2 and was rooted with Xposed Framework installed. I need some help and advice on how to fix it, if possible, or whether it's beyond fixing.
A few days ago my tablet was working fine and there was no indication of anything wrong. I put it on charge as the battery was getting low from watching YouTube. I came back to it a couple of hours later to find it stuck on the Samsung boot screen, but was able to get into Odin mode after some time (I tried to get into recovery but it wouldn't work). It had some trouble being recognised in the computer at first. I tried flashing the stock ROM again several times, but it failed each time with no useful error code.
I then tried rebooting which came up with a firmware upgrade error and asked me to recover it with Kies. I tried that to no avail. Firstly tried with Kies 3 which said the device wasn't compatible, even though I have plugged it into Kies before and it has been recognised and worked fine. I then tried the older Kies which wouldn't work either. Then, I opened Odin again and found it was being seen even with this error screen instead of Odin mode. I tried flashing again but still didn't work and had a COM port error instead. I did make sure that Kies was completely shut before attempting to flash. I even attempted to perform a proper Nand erase and repartition but that also didn't work and failed.
I couldn't do anymore after that due to it being so late at night, and had no choice but to let the battery drain. It now won't power on at all, nor does it appear to be charging, although there is something under a metal plate (not entirely sure what it is but possibly the memory or CPU chip), that gets warm when plugged in and slightly warmer when trying to power it on.
I did try a different computer, different cables and different operating systems to ensure none of those were contributing.
I have also tried to use ADB to get the device to be 'seen' but that didn't work either (used 'adb devices' command), but I'm new to ADB so don't understand it too well yet.
I appreciate any help given and hope I've given enough detail. Thank-you for your time,
Jed.
If all else fails try this
https://youtu.be/m2VJ_VRIRSI?t=201
Remove back cover and reattach the battery. Worked for me when my tablet wouldnt charge/turn on.
Maybe after this you can get it to be read by the computer.
wbb1 said:
If all else fails try this
https://youtu.be/m2VJ_VRIRSI?t=201
Remove back cover and reattach the battery. Worked for me when my tablet wouldnt charge/turn on.
Maybe after this you can get it to be read by the computer.
Click to expand...
Click to collapse
I tried this to no avail, with multiple chargers and leads. Thanks for the suggestion though.
I'm in the same boat myself and have not been able to get the tablet to power on at all.
Tried disconnecting the battery
Purchased a new charge/usb port
Any number of key combination tried for extended periods of time.
I think the tablet has officially eaten the dust.
I didn't even use it all that much. Only for ROMing and Readly.
Oh well...
CodeJACK said:
I'm in the same boat myself and have not been able to get the tablet to power on at all.
Tried disconnecting the battery
Purchased a new charge/usb port
Any number of key combination tried for extended periods of time.
I think the tablet has officially eaten the dust.
I didn't even use it all that much. Only for ROMing and Readly.
Oh well...
Click to expand...
Click to collapse
Yeah, I've lobbed everything I had for it, just gotta get a hammer and smash it up. It died with personal data on it and I'd rather not take any chances.

Categories

Resources