help me please !!
while updating my phone is stuck on 4% !
i am unable to access recovery mode ! just download mode !
it gives this message while updating !
Code:
: Model Dll Msg Not Found(2004, 8)
22:12:30 : wParam : 2004, lParam = 9
22:12:30 : MODEL DLL Event : (2004, 9)
22:12:30 : Model Dll Msg Not Found(2004, 9)
22:12:33 : wParam : 2004, lParam = 10
22:12:33 : MODEL DLL Event : (2004, 10)
22:12:33 : Model Dll Msg Not Found(2004, 10)
22:12:35 : wParam : 2004, lParam = 11
22:12:35 : MODEL DLL Event : (2004, 11)
22:12:35 : Model Dll Msg Not Found(2004, 11)
22:12:37 : wParam : 2004, lParam = 12
22:12:37 : MODEL DLL Event : (2004, 12)
22:12:37 : Model Dll Msg Not Found22:14:11 : wParam : 2004, lParam = 37
22:14:11 : MODEL DLL Event : (2004, 37)
22:14:11 : Model Dll Msg Not Found(2004, 37)
(2004, 12)
22:14:21 : wParam : 2004, lParam = 40
22:14:21 : MODEL DLL Event : (2004, 40)
22:14:22 : Model Dll Msg Not Found(2004, 40)
Go back to the update tool and select your model.dll again... second field on the left.
I had this happen too and thats what I did to fix it.
Kill the app in task manager, make sure that csmg.lgmobile is blocked in hosts, and make sure small http server is running. Then relaunch the program.
Sent from my LG-P930 using xda premium
mattman86 said:
Go back to the update tool and select your model.dll again... second field on the left.
I had this happen too and thats what I did to fix it.
Click to expand...
Click to collapse
where is the dll file ??
and do you flash in cdma or 3gqct ??
thanks !
aaki_rocker said:
where is the dll file ??
and do you flash in cdma or 3gqct ??
thanks !
Click to expand...
Click to collapse
In the same folder as the update tool.
I just left it on cdma
mattman86 said:
In the same folder as the update tool.
I just left it on cdma
Click to expand...
Click to collapse
there are many dll's !!
what is the filename of the dll ?
pls reply !
thanks..
aaki_rocker said:
there are many dll's !!
what is the filename of the dll ?
pls reply !
thanks..
Click to expand...
Click to collapse
Don't panic! Restart update tool from rani990 post via task. I'm had same problem,it's normal. Don't change nothing.
Sent from my LG-P930 using xda app-developers app
Andasa said:
Don't panic! Restart update tool from rani990 post via task. I'm had same problem,it's normal. Don't change nothing.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
oh man !!
i almost **** my pants !!
i just forgot to switch the mode to emergency !
silly me !! :silly:
update is going on to v20c ! @ 13% now !
i will tell mods to close this thread now !!
thanks all !
When this happens, just let it go. It's actually flashing. Should take 15min or so.
Sent from my LG-P930 using xda app-developers app
Mes3 said:
When this happens, just let it go. It's actually flashing. Should take 15min or so.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
no ! i think it wasn't !
i waited for more than 17 minutes with no results !
whereas after correcting my steps, i flashed the kdz in less than 7 mins !
Im also stuck at 4% and have been trying to figure this out for weeks. Please help me!! it says the same thing Model dll Msg not found to 100 then phone reboots and stuck at AT&T Boot Logo!! And yes I select the model.dll.
tampaboy1984 said:
Im also stuck at 4% and have been trying to figure this out for weeks. Please help me!! it says the same thing Model dll Msg not found to 100 then phone reboots and stuck at AT&T Boot Logo!! And yes I select the model.dll.
Click to expand...
Click to collapse
if its stuck at boot logo !
a factory wipe should start your phone !
stuck at boot logo>>pull battery>>put battery in>>down arrow + power >> press power button two times to confirm ! phone will restart !
Related
Lumia 900 RM-808 AT&T Prod code 059N3B9 or 059M7R3 or 059L6S0 and 059M7R4 to W.P7.8
Hi all
“I Bought two nokia 900 RM-808 from AT&T Lumia 900 Product code 059L6S0 .one blue and one black .
I was upset he had not received an official upgrade to WP 7.8”
So today We are update this smart phone’s TO:
RM-808 from AT&T Lumia 900 Product code 059L6S0
2175.2037.8862.13100 W.P.7.8SE
Pls check if your product code is : 059N3B9 or 059M7R3 or 059L6S0 and 059M7R4 only this products updated by rom AT&T
Additional tnx to Damian !!!
Manual and Firmware --- pls download word file in attach !!!!!!
So if you like my job and you have free same $ please donate me
Ps: to test y smart ##634#
change Gsm Band ##3282#
..
if you are flashed right your phone . pls left tnx in post .
What the point of this firmware, when 8862.144 version available for all lumia 900?
haikkk said:
What the point of this firmware, when 8862.144 version available for all lumia 900?
Click to expand...
Click to collapse
Hi rom file ver. 2175.2307.8862.13001 --->> its W.P 7.8 OS ver. 7.10.8862.114
Could you please add screenshots of about phone menu? I see now older version screens.
Why google find 0 result about 2175.2307.8862.13001 version?
haikkk said:
Could you please add screenshots of about phone menu? I see now older version screens.
Why google find 0 result about 2175.2307.8862.13001 version?
Click to expand...
Click to collapse
attached )
I'm not sure what I'm doing wrong, but the Product Support Tool never sees my phone plugged in. Zune sees it just fine however. I'm using Windows 8, any advice?
HyoImowano said:
I'm not sure what I'm doing wrong, but the Product Support Tool never sees my phone plugged in. Zune sees it just fine however. I'm using Windows 8, any advice?
Click to expand...
Click to collapse
try to install again drivers from C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers after reboot y PC
terraGSM said:
try to install again drivers from C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers after reboot y PC
Click to expand...
Click to collapse
Ok, that got the phone recognized, but now I get this error when I click Start:
An error occurred during downloading package. There may be a problem with the network connection. Please check your network connection settings and cable and try again later.
Nokia.CareSuite.PlugIns.DataPackageDownload.DataPackageDownloadException: An error occurred during downloading package. There may be a problem with the network connection. Please check your network connection settings and cable and try again later. ---> Nokia.Enterprise.Repository.Firmware.VariantPackageNotFoundException: Variant package for requested Sw Version: 2175.2307.8858.12480 not found.
at Nokia.Enterprise.Repository.Firmware.FirmwareRepository.EndDownloadLatestVariantPackage(IAsyncResult asyncResult)
at Nokia.CareSuite.DataPackages.DownloadManager.DownloadManager.HandleFirmwareRepositoryDownloadVariantPackageCompleted(IAsyncResult asyncResult)
--- End of inner exception stack trace ---
I have the package downloaded and in Products\RM-808. Any ideas?
I have the Cyan Lumia 900 with product code 059M7R4. Not sure if that makes a difference.
EDIT: Nevermind, I had to click on the globe in the lower right hand corner (it was circled in the guide but I couldn't read what was written there) and click Work Offline for it to flash.
HyoImowano said:
Ok, that got the phone recognized, but now I get this error when I click Start:
An error occurred during downloading package. There may be a problem with the network connection. Please check your network connection settings and cable and try again later.
Nokia.CareSuite.PlugIns.DataPackageDownload.DataPackageDownloadException: An error occurred during downloading package. There may be a problem with the network connection. Please check your network connection settings and cable and try again later. ---> Nokia.Enterprise.Repository.Firmware.VariantPackageNotFoundException: Variant package for requested Sw Version: 2175.2307.8858.12480 not found.
at Nokia.Enterprise.Repository.Firmware.FirmwareRepository.EndDownloadLatestVariantPackage(IAsyncResult asyncResult)
at Nokia.CareSuite.DataPackages.DownloadManager.DownloadManager.HandleFirmwareRepositoryDownloadVariantPackageCompleted(IAsyncResult asyncResult)
--- End of inner exception stack trace ---
I have the package downloaded and in Products\RM-808. Any ideas?
I have the Cyan Lumia 900 with product code 059M7R4. Not sure if that makes a difference.
EDIT: Nevermind, I had to click on the globe in the lower right hand corner (it was circled in the guide but I couldn't read what was written there) and click Work Offline for it to flash.
Click to expand...
Click to collapse
OK
0) Pls enable your connect to internet
1) Run Product Support Tool For Store
2) In Left side up - press Tools - go to Firmware download
3) Post Product code - Press check online - after press Download
4) Now Left Down - press Programming - Refurbish
hi .
What is the problem ?
i can't sign in ...
TIR2 said:
hi .
What is the problem ?
i'm can't sign in ...
HI
try to reinstall it .
Click to expand...
Click to collapse
hi, many thanks terraGSM for this tutorial, it's awesome i finally have W7.8!!
for the people having issues with nokia care suite, i had issues too!
take a previous version, for example use link from SuperSport:
once installed, update the software to version 2013.13.4.4
then my phone was detected!
after this follow teraGSM tutorial: it worked for me!
-r0bin- said:
hi, many thanks terraGSM for this tutorial, it's awesome i finally have W7.8!!
for the people having issues with nokia care suite, i had issues too!
take a previous version, for example use link from SuperSport:
once installed, update the software to version 2013.13.4.4
then my phone was detected!
after this follow teraGSM tutorial: it worked for me!
Click to expand...
Click to collapse
pls now i try download again rm808 file but first and number 2 files no cant extrat file are corrupted
waltercell said:
pls now i try download again rm808 file but first and number 2 files no cant extrat file are corrupted
Click to expand...
Click to collapse
then download again, if file is corrupted it means download problem.
try to download the files from another physical location
try to find another link to download the files
good luck
waltercell said:
pls now i try download again rm808 file but first and number 2 files no cant extrat file are corrupted
Click to expand...
Click to collapse
hi
full access to https://mega.co.nz/
login : [email protected]
pass: 1a2a3a4a5a
terraGSM said:
hi
full access to https://mega.co.nz/
login : [email protected]
pass: 1a2a3a4a5a
Click to expand...
Click to collapse
hello I have this problem with my lumia 900
Loading hashblock failed with ‘Messenger encountered error ‘ERROR: OSBL reported an error! Code: 0x40002’’
Exception:
Nokia.Wezen.Programming.OsblReturnedErrorException: Loading hashblock failed with ‘Messenger encountered error ‘ERROR: OSBL reported an error! Code: 0x40002’’ ---> Nokia.Wezen.Programming.OsblReturnedErrorException: Messenger encountered error ‘ERROR: OSBL reported an error! Code: 0x40002’ ---> Nokia.Wezen.Programming.OsblReturnedErrorException: ERROR: OSBL reported an error! Code: 0x40002
en Nokia.Wezen.Programming.Messaging.Messenger.WaitAndHandleResponse(Bb6Tlv message)
en Nokia.Wezen.Programming.Messaging.Messenger.StartMessageHandling()
--- Fin del seguimiento de la pila de la excepción interna ---
en Nokia.Wezen.Programming.Messaging.Messenger.CheckError()
en Nokia.Wezen.Programming.SequenceLogic.HashLoader.LoadHashBlock(Byte[] data, UInt64 count, EscoCallbackData callbackData)
en Nokia.Wezen.Programming.ImageHandling.EscoReader.ManageDataBuffer(EscoCallbackData hashData)
en Nokia.Wezen.Programming.ImageHandling.EscoReader.Write(Byte[] buffer, UInt64 count, EscoCallbackData hashData)
en Nokia.Wezen.Programming.ImageHandling.EscoReader.Write(Byte[] buffer, Int32 offset, Int32 count)
en ComponentAce.Compression.Archiver.BaseArchiver.WriteToStreamWithOnDiskFull(Byte[] buffer, Int32 offset, Int32 count, Stream stream)
--- Fin del seguimiento de la pila de la excepción interna ---
en Nokia.Wezen.Programming.SequenceLogic.HashLoader.CheckForErrors()
en Nokia.Wezen.Programming.SequenceLogic.ImageLoader.LoadBinaryData(ImageBinaryData binaryData, HashLoader hashLoader, ImageCertificate certificate)
en Nokia.Wezen.Programming.SequenceLogic.ImageLoader.LoadImageFile(ImageBinaryData binaryData, ImageCertificate writeCertificate)
en Nokia.Wezen.Programming.SequenceLogic.ProgrammingLogic.ProgramImageFiles(EraseMethod eraseMethod)
en Nokia.Wezen.Programming.Programmer.Program()
en Nokia.Wezen.Product.Programming.FirmwareUpdate.WezenFirmwareUpdate.Recovery()
en Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
en Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__a(Object state)
men, any chance to download again??
terraGSM said:
hi
full access to https://mega.co.nz/
login : [email protected]
pass: 1a2a3a4a5a
Click to expand...
Click to collapse
hi mr, is there any chance to download the rm-808 again?? links are dead... thanks...
hello,
i know that this isn't the right place for my question but i didn't find a forum dedicated to the same of my problem.
so my phone samsung wave s8500 running bada got the download mode in the boot.
when i on my phone i get just the download mode even if i did not press the combo keys power vol down camera buttons. i got always on the download mode and my phone dont want to start
i triyed to unbrik him using multiloaders v5.65 and upload all required fils succefully but always the same problem
so ??? do think that a hardware problem ??
please help me it's urgent
thanks in advance
ANY HELP???
Multiloader shows Errors?
Which Firmware you have tried?
XXLA1 for instance... bada 2...
Status before?
Working?
Or you bought in used condition... unknown status?
In other words...
More details please.
Attach Screenshot from Multiloader for instance...
Btw.
"Latest" Multiloader is 5.67
Best Regards
thanks for the best reply friend
firmware : S8500XPKG5 bada. downloaded from multiloader via download mode
status before : work normal
it was normal, i don't know what happened
when i uploaded the fota + boot files via this topic, i got an orange screen, then a green message appeared ' upload data to pc '
what can i do ?
hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )
1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
upload data to pc
Click to expand...
Click to collapse
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards
yakapa40 said:
hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )
Click to expand...
Click to collapse
i know and i uploaded all needed files but no success i'll try what Adfree said and i'll told you the results
thanks all for replies
adfree said:
1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards
Click to expand...
Click to collapse
i know that upload data to pc massage not download mode
but i told you that when i was in download mode and have uploaded just boot files + fota from the link that in the forum i got this message
when i upload all files check LSI . boot change . full download . master ROM
message appeared after download " All files complete "
the probleme
my phone didn't restart after download
and when i unplug the battery and plug it again and power the phone always the same problem i got in download mode again
Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards
I did the same job exept I choose Master download. Ok I will try againe like the picture. Thanks adfree for your help. See you
adfree said:
Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards
Click to expand...
Click to collapse
My windows is 8
Shall I do it in 7 or XP ?
I have NO Win 8 experiences...
Not tested.
Also never tested on 64 bit System...
32 bit XP 10000000 % working for me. :angel:
Before you try on other Windows...
Check RC2 file ONLY to flash.
http://forum.xda-developers.com/showpost.php?p=45210653&postcount=11
Maybe S8500 shows Bluescreen.
Maybe Memory damaged like this:
http://forum.xda-developers.com/showthread.php?t=1398528
Blue Screen can show hints like this:
Code:
Type : Unofficial Version
Number : 1243
Builder : superuser
Host : S1-AGENT08
Date : 2012/01/05
Time : 19:21:46
Size : 42730876 bytes
CheckSum : 0xf4e364eb
View :
S/W version:S8500+XX+LA1
Modem:Q6270B-KPRBL-1.5.45T
SHP:VPP R5 2.1.1
Build Host:S1-AGENT08
BuildAt:2012/01/05 19:21:46
App Debug Level : 0
Data Abort!Page Translation Fa
ult for (0x6c92d214) Read Acce
ss Detection
<Callstack information>
PC = 404327A6 _printf_str
LR = 404317F1 __printf
<Mocha Task Callstack>
__printf
_printf_char_common
_snprintf
_MemGetCurrentlyAllocatedMemLi
stEx
OemBmShutdown
__WmEventHandlerProc
__WmProcessEventInternal
WmProcessEvent
__BootTimerCallback
__WmProcessTimerEvent
__WmProcessEventInternal
WmMainLoop
MochaTask
ALL HW Information:
HW VERSION : S8500_REV07
IMEI VERSION : Not Active
Best Regards
yes you'r right MAN
the windows 8 does not work with the flash correctly
it's ok now the problem has been solved thank you very very much adfree
big thanks
so happy now
this is the best forum
i love it
hello friends
after download and all done with success some pads does not work correctly for example
clicking on call pad = going to camera
on midium pad : a message appeared ''captured'' then the screen freeze up ??
lock pad does not work anymore
Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards
adfree said:
Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards
Click to expand...
Click to collapse
the same phone and same details
i changed the rom by an other from a website http://tizenhub.com/2012/01/official-bada-2-0-firmware-s8500xxla1.html
then when all complete the keypad camera work but as volume, and the lock pad as camera ????¿¿¿¿ lol what happened to my mobile hehhe
the same phone and same details
Click to expand...
Click to collapse
You mean you have an NOT for Sale handset?
An prototype S8500 ?
Best Regards
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
https://www.youtube.com/watch?v=w4RSEholcuM
The video is deleted. Where can i Finf it
Abandoned War Place said:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
https://www.youtube.com/watch?v=w4RSEholcuM
Click to expand...
Click to collapse
You Sir are the Hero of the night!
Thank you!!!!!
How do you patch the dll? Video not working
inso420 said:
How do you patch the dll? Video not working
Click to expand...
Click to collapse
Navigate to LGUP install directory (default C:\Program Files (x86)\LG Electronics\LGUP) and simply replace the 8994.dll in model\8994 directory.
Here is the version 0.4.3 from the F500 variant of the device.
It was the only one that worked for me on the v29 firmware.
LGUP_8994.dll
i still got this error error 0x2000 invalid
shahid001 said:
i still got this error error 0x2000 invalid
Click to expand...
Click to collapse
cause you need flash the v20p KDZ first, then you can flash any other KDZ.
the_naxhoo said:
cause you need flash the v20p KDZ first, then you can flash any other KDZ.
Click to expand...
Click to collapse
can you give me link pleasse
shahid001 said:
can you give me link pleasse
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
I had wasted so much time and tried so many solutions before coming across your post!
This works perfectly.
Thank you so much !
the_naxhoo said:
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Click to expand...
Click to collapse
i have lg g4 f500l 30b will it work for it i want to downgrade to android 6 ?
thank you the naxhoo
the_naxhoo said:
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Click to expand...
Click to collapse
Thank you it worked for my G4 H815!! It was bricked since my upgrade to nougat and it was impossible to go back to stock ROM Marshmallow.. (error 0x2000 with LGUP) Do you know why it works with this kdz and not with others? It's the only M version allowed for downgrade?
You saved my week :good:
ur d best man. worked like a charm mate. Tnx
Acc request
Plz acc my request for the file because i really really need the file
need the file please accept request moular*** @gmail.com
---------- Post added at 11:48 AM ---------- Previous post was at 11:35 AM ----------
tulen_kobi said:
here is the version 0.4.3 from the f500 variant of the device.
It was the only one that worked for me on the v29 firmware.
lgup_8994.dll
Click to expand...
Click to collapse
thank you!!!! Fixed 0x2000 error on my nugot vs986 downgrading to mm !!!
thank you very much it works with VS986 2BA to 13B
tulen_kobi said:
Here is the version 0.4.3 from the F500 variant of the device.
It was the only one that worked for me on the v29 firmware.
LGUP_8994.dll"LGUP_8994.dll
Click to expand...
Click to collapse
Thank you very much it works with VS986 2BA to 13B.
LGUP always stops at 16% then gives me a "0x2000 error.invalid command response"
After replacing the DLL file that you provided. It works.
May it will work for H818p Nougat,,, because I'm searching it for many times
My Nougat H818p is in hanging condition when downgrading to MM , LL or flashing Nougat again at
PrimaryGPT 11% i think,,, so please experts solve my issues urgently
Thank you so much !!!
After a passage with the rom "H-ROM V30 PORT V2.2", I bricked my H815 under LG UP ... You save my phone !!!
Thank you so so much !!!
Abandoned War Place said:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
Click to expand...
Click to collapse
All the link given is very death
Does realme X support carrier aggregation?
I think this device support 2CA but i don't combinations so then i can't confirm network support. Someone who have this device please get logs https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices and send these to so i can add this device to my site: https://cacombos.com/contribute
I have few Oppo devices listed already: https://cacombos.com/search?key=Oppo
U want this log?
https://drive.google.com/file/d/1Ggn5S-fiHAOXk7km7ysgH6Szff019QrH/view?usp=drivesdk
rupeshmaurya35 said:
U want this log?
https://drive.google.com/file/d/1Ggn5S-fiHAOXk7km7ysgH6Szff019QrH/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you for the log but there missing some information. Can you test again but wait little bit longer so your device connect to 4G back. Also i need your device model number, you can find it on Android Settings -> About so then i can add it to my site.
Ok, here is the log
And my device is RMX1901 Global variant
And please let me know about the process if it supports 2CA .
And by the way I am using NSG but i don't have Premium licences ,so i can't load log file from NSG. I use it for band locking only.
https://drive.google.com/file/d/1HNVJ8j7JNzoy94cXSMRGLyU7jBHPyItd/view?usp=drivesdk
rupeshmaurya35 said:
Ok, here is the log
And my device is RMX1901 Global variant
And please let me know about the process if it supports 2CA .
And by the way I am using NSG but i don't have Premium licences ,so i can't load log file from NSG. I use it for band locking only.
https://drive.google.com/file/d/1HNVJ8j7JNzoy94cXSMRGLyU7jBHPyItd/view?usp=drivesdk
Click to expand...
Click to collapse
Sorry again but this log file did not again include any combos. So you have to first start log recording on Get QXDM log -> open device log. Then put your phone Airplane mode on and off. Wait minute to get your phone connected to 4G-network. Then repeat this step few times. Then you can close log and share log file.
Oh yes NSG Premium only allow reading logs and Signaling data.
I have done the same last time , check screenshot for values may be something wrong there.
rupeshmaurya35 said:
I have done the same last time , check screenshot for values may be something wrong there.
Click to expand...
Click to collapse
Looks like your settings are fine. Open logging, then put your device to Airplane mode on, wait your phone connect to 4G (1min), then put your phone back to Airplane and repeat step. This should include all data in log.
I have tried every possible band and CA is not supported in Realme X
rupeshmaurya35 said:
I have tried every possible band and CA is not supported in Realme X
Click to expand...
Click to collapse
I think Realme support only Contiguous CA but without modem log impossible verify. in cacombos.com/contribute there is instructions how to get log.
olkitu said:
I think this device support 2CA but i don't combinations so then i can't confirm network support. Someone who have this device please get logs https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices and send these to so i can add this device to my site: https://cacombos.com/contribute
I have few Oppo devices listed already: https://cacombos.com/search?key=Oppo
Click to expand...
Click to collapse
LTE RRC OTA Packet
version : 20
phyCellId : 231
freq : 1251
sfn : 0
Channel : 8
ul-dcch
message -> c1 -> ueCapabilityInformation
rrc-TransactionIdentifier : 2
criticalExtensions -> c1 -> ueCapabilityInformation-r8
ue-CapabilityRAT-ContainerList
[0]
rat-Type : eutra
ueCapabilityRAT-Container
accessStratumRelease : rel12
ue-Category : 4
pdcp-Parameters
supportedROHC-Profiles
profile0x0001-r15 : true
profile0x0002-r15 : true
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Hilal GR BRO said:
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Click to expand...
Click to collapse
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Jowarnerrin said:
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Click to expand...
Click to collapse
Did you try two links