Develop Bugs

How can i find my Touch Pro2's Device ID

Hi all
I need help in this
I have been trying to find out my device id but till now no success !!
I have also tried "device.zip" which is available here in this forum but still now luck
When i used the device.zip and ran the file it got
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID :
CID :
IPL :
SPL :
ROM Version : 1.86.401.0 (67102)
ExtROM Version : None
Operator Version: None
AKU Version : 5.0.80
Page Pool : Unknown
RAM Size : MB
ROM Size : MB
Model No. : Unknown
Part Number :
MCC+MNC : Not found
IMEI (private) :
Serial Number (private):
MAC Address (private) :
there is no information at all
during the process it tells me "A attached device is not functioning correctly"
The details of my phone are
ROM : 1.86.4010.0 (67102) WWE
ROM DATE: 09/25/09
RADIO VERSION : 4.49.25.17
CPU : QUALCOMM 7200 A
SPEED: 528 MHZ
RAM SIZE: 288
Addtional information:
I have hard-spl my phone so that i could install cooked roms
Now i have the offical Europe WM 6.5 installed
My phone is T-mobile HTC touch pro 2
I have already tired the system~about~device id
There it tells me my name as device id "jagdesh" but when i try to enter this into any app which needs my device id to unlock its says invalid
On my windows media center it says "Jagdesh's HTC Touch Pro 2"
So how can i find my device id ...help please!!

To find the device ID just hit: Start-->Settings-->About-->Device ID.
However, that probably doesn't matter, because it sounds like the apps probably need the "Owner Name", not the Device ID. You can find that by going: Start-->Settings-->Personal-->Owner Information.

Let me try registering the app with my owner info...
I will let you know it that works
But how can i find my Device ID if i want when i am not able to with the methods above

jagdesh said:
But how can i find my Device ID if i want when i am not able to with the methods above
Click to expand...
Click to collapse
What do you mean? Doesn't that method work for you? That gets you straight to the info you're asking for.

TaurusBullba said:
What do you mean? Doesn't that method work for you? That gets you straight to the info you're asking for.
Click to expand...
Click to collapse
Nope till now guys i have not been able to find out my Device ID
Please help urgently since i need it badly to activate my apps

Guys really need your help to find out my Device ID
Please anyone....

Try search for enableownerinfo, think its a cab for your problem. I had the same problem but cant remember if it was that cab who solved the issue, but you can try...

settings --- all settings --- Today --- Items --- uncheck htc Sense --- check owner info --- ok --- go to homepage --- click tap here to set owner info ---
Hope this is what u need.

rk73 said:
Try search for enableownerinfo, think its a cab for your problem. I had the same problem but cant remember if it was that cab who solved the issue, but you can try...
Click to expand...
Click to collapse
Googled it and installed it now..
But i am not sure if this is what i want
See i am trying to install some apps and when i try to register the it asks me my device id which i dont know how to get that!!
Anyways i will try this method and let you know if this works
Thanks

lombardo8 said:
settings --- all settings --- Today --- Items --- uncheck htc Sense --- check owner info --- ok --- go to homepage --- click tap here to set owner info ---
Hope this is what u need.
Click to expand...
Click to collapse
Thanks i will try this and let you know if it worked
But like i said i do think that Device Id is the same has owner's name .. maybe its some number or something
I read it somewhere that a device id is something which never changes its bunch of numbers and alphabets
Its not the same has IMEI or S/N number ..
Anyways will let you guys know of the results soon

HTC Device ID
Hello Jagdesh, greetings from the Netherlands where this HTC Touch Pro 2 is driving me crazy in may ways. One of them is not being able to find the Device ID. Did you find it at last?
And if so, can you tell me where these HTC people have hidden it?
Many thanks in advance,
Paul

Here's the answer, credit to HTC support the netherlands: look under the battery. There it is. ID starts starts with "HT"
Greetz Paul

pjgross said:
Hello Jagdesh, greetings from the Netherlands where this HTC Touch Pro 2 is driving me crazy in may ways. One of them is not being able to find the Device ID. Did you find it at last?
And if so, can you tell me where these HTC people have hidden it?
Many thanks in advance,
Paul
Click to expand...
Click to collapse
Did you mean the Device ID or the IMEI?

Hi Jagdish,
I faced the same problem you did. I found owner information icon when i bought the phone. Later when I hard reset i dont find it.
you might have solved the problem. for others here is a way to go to owner information. This is the way I did.
Installed TouchShell. On the TouchShell desktop screen tap and hold and goto settings > About tab > Registration > beside the owner id, click Edit tab. You are there.

DSDS on Android 10

As after the stable release of Android 10 to our device, there is a "+" icon next to your network setting.
But i am just not able to get it configured.
At the beginning of the process it says.." download your sim" if u don't have a physical one and when i proceed with that option it loads for a while and pops up cannot download..SS attached.
And while doing this you have to be on a wifi network as it disables your currently inserted sim..thats that.

Are you sure it's going to work for P2XL? Was it working in any of the betas?

It happened to me in beta i guess you have to factory reset your phone and everything should be ok it worked for me just don't forget to back up your data

No need for factory resetting just download the latest sim manager from the play store or if it's not available to you yet you can also download it from apkmirror,i am referring to version D.1.5.73, now you should be able to scan a qr code to setup esim
P.S if you have any problem setting up esim keep us updated

The latest sim manager version available on apkmirror is D.1.5.71
Can you post a link to version 73? Because 71 shows same error as shown in a screenshot in the first post. Can you guys use other carrier that Google Fi on Pixel 2 xl?

xnova35 said:
The latest sim manager version available on apkmirror is D.1.5.71
Can you post a link to version 73? Because 71 shows same error as shown in a screenshot in the first post. Can you guys use other carrier that Google Fi on Pixel 2 xl?
Click to expand...
Click to collapse
Here you go
https://www.apkmirror.com/apk/google-inc/esim-manager/esim-manager-d-1-5-73-google-5793666-release/

Wow! Just wow, it works!! At least QR code scanner, I'll need to go to my operator to get a QR code to try it of course.
Great change, huuuge thanks to @kastik4, I was waiting for it in Android Q release, but problem was obviously in esim-manager.
Ok then back to the thread topic - anybody has DSDS (Dual sim dual standby) working on Pixel 2(XL)?

I checked with two of my operators.. They gave me the QR codes, but our phone isn't able to download the profiles. I keep getting "Network not activated" error.

hymnz said:
I checked with two of my operators.. They gave me the QR codes, but our phone isn't able to download the profiles. I keep getting "Network not activated" error.
Click to expand...
Click to collapse
That's exactly the same that I experienced today - I went to a Czech Vodafone and they told me that Pixel 2 isn't able to use Czech e-sims, but Pixel 3 does. I tried to reach Google, but they just ignored my call request, will try tomorrow.
Anybody was successful in downloading e-sim? Is there any physical difference or it's just a software certification? In latter case we could overcome it with software hacks.

According to Google support, it's error with network operator and I'm to check with them. Network people say p2xl isn't in their list of supported devices. WTH. I'm sure it's a software thing.
P.S. It's not going to be DSDS mode, it's DSSS mode only. Only one sim/connection active at a time

@xnova35 , did you get any response from Google?

hymnz said:
@xnova35 , did you get any response from Google?
Click to expand...
Click to collapse
@hymnz, Imagine, Google is ignoring me!! I request a call from Tips&Support section in my phone (btw it says nonstop 24/7 help), several times it confirmed me that "Specialist will call you as soon as possible" and nothing.
I searched for number I could call, but didn't find any which would lead to Pixel help. Does anybody has a number to call, preferably in US or Europe?
I didn't find any proof that Pixel 2 and 3 in e-sim are physically different. So my guess is if phone will report itself as "Pixel 3" (can be done with rooting) it could work. I was surprised that there are no "Pixel 3" Roms for Pixel 2 - all features and structure ported to our model.

xnova35 said:
@hymnz, Imagine, Google is ignoring me!! I request a call from Tips&Support section in my phone (btw it says nonstop 24/7 help), several times it confirmed me that "Specialist will call you as soon as possible" and nothing.
I searched for number I could call, but didn't find any which would lead to Pixel help. Does anybody has a number to call, preferably in US or Europe?
I didn't find any proof that Pixel 2 and 3 in e-sim are physically different. So my guess is if phone will report itself as "Pixel 3" (can be done with rooting) it could work. I was surprised that there are no "Pixel 3" Roms for Pixel 2 - all features and structure ported to our model.
Click to expand...
Click to collapse
Did you try text chatting with support? Do you have that option?

hymnz said:
Did you try text chatting with support? Do you have that option?
Click to expand...
Click to collapse
@hymnz, no, there's no chat option anymore (however it used to be there), of course I would have used it.

hmm, i'm on the latest sim manager app, but still haven't received QR code scanning feature.. any ideas?

morpig2 said:
hmm, i'm on the latest sim manager app, but still haven't received QR code scanning feature.. any ideas?
Click to expand...
Click to collapse
Install this https://www.apkmirror.com/apk/google-inc/esim-manager/esim-manager-d-1-5-73-google-5793666-release/

Any update from anyone who has tried?

I have just tried to install the latest version of SIM Manager by Google from APKMirror on Lineage OS 18.1 (Android 11) running on Google Pixel 2.
With the updated version of the SIM Manager, I was able to get the phone to display a new user interface for adding an eSIM by scanning a QR code. However, the process got stuck on the spinner animation immediately after scanning the QR code. The phone did not freeze but it would never move on to the next part of the eSIM provisioning process.
In the adb log, I could see messages like these:
Less:
W GooglePlayServicesUtil: com.google.android.euicc requires the Google Play Store, but it is missing.
which I do not understand because I *do* have Google Play Store and Google Play Services installed. I have also tried to update them to the latest versions available on APKMirror but the behavior remained the same.
During an attempt to provision an eSIM, the following messages seemed to be relevant:
Less:
I EuiccGoogle: [2] CarrierInfo.createCarrierFromJson: Received empty carrier jason string
I EuiccGoogle: [182] EuiccServiceImpl.ensureSlotIsEuiccAndActive: Passed in slotId=-1; euiccIsActive=false; targetSlotIsRemovable=false; forceDeactivateSim=false.
I EuiccGoogle: [182] EuiccServiceImpl.onGetDownloadableSubscriptionMetadataInternal: onGetDownloadableSubscriptionMetadataInternal: slotId = -1, forceDeactivateSim = false, ensureSlotIsEuiccAndActive = Pair{-1 false}.
I EuiccGoogle: [182] EuiccErrorMapper.mapErrorCode: Result: EuiccServiceError - -1
I EuiccGoogle: [182] EuiccServiceImpl.onGetDownloadableSubscriptionMetadata: onGetDownloadableSubscriptionMetadata errorCode: -1
...
E EuiccGoogle: [134] ClearcutServerLog$1.doInBackground: Cannot connect to GMS API client.
E EuiccGoogle: com.google.android.gms.common.api.ApiException: 17: API: UsageReporting.API is not available on this device. Connection failed with: ConnectionResult{statusCode=SERVICE_INVALID, resolution=null, message=null}
The part which seems suspicious is "Received empty carrier jason string" but I am not sure what it refers to exactly. It seems like getting the eSIM metadata fails for some reason.
I have root access via Magisk so I have installed the MagiskHide Props Config module, changed the device fingerprint to Google Pixel 3 and also activated the device simulation and enabled the simulation of all the related props. Then I have tried to repeat the eSIM provisioning again but the outcome remained the same.
With the root access, I believe that I should be able to somehow arrange that the regular eSIM provisioning via QR code works. But I do not know which parts need to be adjusted and how.

Get VOLTE working on OP7T

Hello all together,
I wondered why VOLTE was not working here in Germany with Vodafone carrier. So I tried older solutions.
Here is what worked for me:
Install new Oneplus Logkit:
https://www.apkmirror.com/apk/oneplus-ltd/onepluslogkit/onepluslogkit-1-0-release/
Android 9 version also works on Android 10.
Found the helping post at https://forum.xda-developers.com/showpost.php?p=79577939&postcount=23
Then do the following
Open the dialer: *#800# --> oneplus Logkit --> Function Switch --> enable VoLTE + VoWifi switch
found at https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
After reboot VOLTE was instantly on and working.
Aa always: Do at your own risk. I am not repsonsible for bricked HW, nuclear war and alien invasions :cyclops:

Cool, thank you for sharing. I use Vodafone here in Germany as well and was wondering why it didn't work.

I have the volte icon , how do I know if I'm using it ?

hightech316 said:
I have the volte icon , how do I know if I'm using it ?
Click to expand...
Click to collapse
Make a call and try and use the internet at the same time. No data on call? No VoLTE.

Everything working good so far, provider Orange in Poland, thanks for sharing. [emoji1308]
Wysłane z mojego HD1903 przy użyciu Tapatalka

Still unable
I have tried the logkit app and successfully enabled but still while making call the icon drops to H or 3G. and also by dialing *#*#4636#*#*, still the icon for VoWIFI and VoLTE provisioned are shown enabled but grayed out.. Any solutions ? I am from Malaysia and my both 2 telco has enabled the service on my sim and already tested using huwaei p20 pro. only This OP 7T does not have the feature.

dearshakya said:
I have tried the logkit app and successfully enabled but still while making call the icon drops to H or 3G. and also by dialing *#*#4636#*#*, still the icon for VoWIFI and VoLTE provisioned are shown enabled but grayed out.. Any solutions ? I am from Malaysia and my both 2 telco has enabled the service on my sim and already tested using huwaei p20 pro. only This OP 7T does not have the feature.
Click to expand...
Click to collapse
Same here. Your OP7T is China or global set?

dngff said:
Same here. Your OP7T is China or global set?
Click to expand...
Click to collapse
same using china set

In order to get VoLTE and VoWiFi working with Orange in Belgium, I followed this guide :
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
To access Engineering Mode I had to install it from apkmirror, then it's accessible by dialing *#801#.
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Serial causes fc, but full-port switch works and it's enough.

Thanks for this post. I recently upgraded from OP6 to OP7T and lost the VoLTE + Wifi calling on the OP7T - I am on Vodafone UK.
I did the stuff in the first post and after the reboot the VoLTE logo appeared and the additional options under SIM settings.
I have a poor Vodafone signal at work - so this really makes a difference for me,.
Thank you!

Silly question but do I need to / should I uninstall the apk after enabling VOLTE?
Thanks

Successfully enabled
dngff said:
Same here. Your OP7T is China or global set?
Click to expand...
Click to collapse
China set but currently using global oxygen os. and also i have successfully enabled volte and vowifi and testing for 1 week. so far ok. i follow the video tutorial provided below.
www(#)youtube(#)com/watch?v=X11kw0z7U_E&t=427s
While using "India-vodafone commecial" profile and others, i faced one issue, "unable to receive calls from other number to my oneplus 7 volte enabled sim:crying:.. for example sim 1 i am using "UNIFI" and sim 2 i am using "DIGI". from both num i was able to make call but sometime unable to receive call. i suspect this was due to different country profile settings. To solve the issue, i have used "Telefonica-UK-Commercial" and now the issue is gone:good::good::laugh:.
the file link also provided below:
www98(#)zippyshare(#)com/v/cOKFso6s/file(#)html
One thing also i want to share, when we change the sim, we need to setup the profile again using PDC app. This thing is bit irritating.
sorry but due to i am new user for the forum, the forum does not allow me to post the external link on my post. so PLEASE replace " (#) " with " . " (dot) from the link and try to open the link.

I left it on the phone for future purpose. It is a system app which just was updated.
harryw66 said:
Silly question but do I need to / should I uninstall the apk after enabling VOLTE?
Thanks
Click to expand...
Click to collapse

Did anyone notice battery life diffrence after doing this? I'm not talking about normal diffrences causign by the volte actualy working, but strange -1h battery life after only enabling the volte vowifi switches from the onepluslogkit

So mad because most of the profiles in PDC arent giving me VoLTE. Is rooting the phone would solve this issue?

Qualcomm drivers for Oneplus 7T
Hello, guys...
Maybe someone could send a link for the qualcomm drivers for Oneplus 7T? Because all links in the thread are not working..
I have managed to install PDC in QPST in my laptop, but there is no driver shown...
I believe it is before I have the wrong Qualcomm drivers...
Any ideas or help?
Thanks in advance[/QUOTE]

KostisTTT said:
Hello, guys...
Maybe someone could send a link for the qualcomm drivers for Oneplus 7T? Because all links in the thread are not working..
I have managed to install PDC in QPST in my laptop, but there is no driver shown...
I believe it is before I have the wrong Qualcomm drivers...
Any ideas or help?
Thanks in advance
Click to expand...
Click to collapse
Follow this guide, as it worked for me. https://www.youtube.com/watch?v=X11kw0z7U_E

EugenStanis said:
Follow this guide, as it worked for me. https://www.youtube.com/watch?v=X11kw0z7U_E
Click to expand...
Click to collapse
I followed the guide, installed all files, but my phone is not shown-connected to PDC.
Any ideas??
Thanks in advance...

KostisTTT said:
I followed the guide, installed all files, but my phone is not shown-connected to PDC.
Any ideas??
Thanks in advance...
Click to expand...
Click to collapse
Do everything like described in guide, then connect device with ADB debugging on (You need root also) and type:
adb shell
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb

EugenStanis said:
Do everything like described in guide, then connect device with ADB debugging on (You need root also) and type:
adb shell
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb
Click to expand...
Click to collapse
@EugenStanis, thanks for your help.
I connected device, ADB on, Rooted and typed the commands.
A window opened in PC (Win 7) which says:
Qualcom USB Composite Device9091 .... Ready for use
Qualcom HS-USB Diagnostics 9091 .... Ready for use
Qualcom HS-USB Modem 9091 .... Ready for use
Qualcom HS-USB WWAN Adapter 9091.... Failed
ADB Interface .... No drivers found
Any ideas??
Thanks again...

Question Engineermode Decryption *#*#5646#*#*

If you own a oneplus phone and have no clue what this is or does ,then do some research first. In my time reversing all of oneplus in general i have made a lil tool that will generate the code for this on the device. If you cant get into diag mode or into *#36446337# then this will decrypt and enable it for 10 min. I still need some phones to test on. Also i have a one line command that will disable it totally but needs root shell.
here is v1.2
One+_TooL.exe | by Ju5t3nc4s3 for OnePlus 7 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
lots added ,and without password
this tool will give you your code without giving up your imei on the internet. i have done all this just with adb shell commands, so know worries. also there is alot of extra tools added to it.

justencase6 said:
If you own a oneplus phone and have no clue what this is or does ,then do some research first. In my time reversing all of oneplus in general i have made a lil tool that will generate the code for this on the device. If you cant get into diag mode or into *#36446337# then this will decrypt and enable it for 10 min. I still need some phones to test on. Also i have a one line command that will disable it totally but needs root shell.
Click to expand...
Click to collapse
What exactly do you want tested? I'm familiar with dialer codes, but I'm not sure what you're looking to find or fix.

Need to see if the script I wrote will work with other OnePlus devices. Does *#36446337# do anything.

justencase6 said:
Need to see if the script I wrote will work with other OnePlus devices. Does *#36446337# do anything.
Click to expand...
Click to collapse
It doesn't appear to do anything.

Then that means engineermode is encrypted. And my script will enable this

.

I tried it on my op9pro a barcode scanner appeared

Mangtas_666 said:
I tried it on my op9pro a barcode scanner appeared
Click to expand...
Click to collapse
The scanner will come up, I can generate the QR code, to decrypt, but I'm working on a script that will do it on the device

No, its not encrypted just download this and it will work normally.
EngineerMode V1.01.0.171117173719.25c8842 APK Download by OnePlus Ltd. - APKMirror
EngineerMode V1.01.0.171117173719.25c8842 APK Download by OnePlus Ltd. - APKMirror Free and safe Android APK downloads
www.apkmirror.com
I use it to edit the efs folder.

I found permanent unlock code generation method, so I created website to generate it.
It looks like QR code scan is just for checking code...
OnePlus Unlock Code Generator
Convert your IMEI to OnePlus FactryMode (EngineeringMode) unlock code.
one.andro.plus

Question what is engineering mode used for?

terlynn4 said:
What exactly do you want tested? I'm familiar with dialer codes, but I'm not sure what you're looking to find or fix.
Click to expand...
Click to collapse
I haven't tried this variant: OnePlus 9 Pro LE2125 | 11.2.9.9 BA | Magisk v23.0 | Omega Kernel
How is it on heavy use?

AndroPlus said:
I found permanent unlock code generation method, so I created website to generate it.
It looks like QR code scan is just for checking code...
OnePlus Unlock Code Generator
Convert your IMEI to OnePlus FactryMode (EngineeringMode) unlock code.
one.andro.plus
Click to expand...
Click to collapse
The code looks like the serial number ?

Steve0007 said:
The code looks like the serial number ?
Click to expand...
Click to collapse
Yes, but it uses password + IMEI to generate so doesn't match with android's serial number

AndroPlus said:
Yes, but it uses password + IMEI to generate so doesn't match with android's serial number
Click to expand...
Click to collapse
Seems to match with the serial number shown on the fastboot first screen.

@AndroPlus
Looking at your mbn module, it replaces some config modem files only for APAC Region.
Could you update for EU and US also ?
Does it improve any data speed as far as you know?

Steve0007 said:
Seems to match with the serial number shown on the fastboot first screen.
Click to expand...
Click to collapse
Didn't match on my device.
Steve0007 said:
@AndroPlus
Looking at your mbn module, it replaces some config modem files only for APAC Region.
Could you update for EU and US also ?
Does it improve any data speed as far as you know?
Click to expand...
Click to collapse
I can't maintain other region's one, please extract mbn from other model's modem.img (can open with 7zip) and put them in the module.
My module has two method to enable VoLTE so most carriers work without mbn.
It doesn't improve speed from my testing.

I created another code generator.
Features:
Pure JavaScript implementation
QR code generation
10 minutes only code (On OnePlus 7T, this is needed) generation
https://jsfiddle.net/nvsofts/vpuqfwhx/
Result only (for mobile devices): https://jsfiddle.net/nvsofts/vpuqfwhx/show

AndroPlus said:
I found permanent unlock code generation method, so I created website to generate it.
It looks like QR code scan is just for checking code...
OnePlus Unlock Code Generator
Convert your IMEI to OnePlus FactryMode (EngineeringMode) unlock code.
one.andro.plus
Click to expand...
Click to collapse
Hi is there an issue with the web site? Running on the desktop, and on the device, same result, no output.
Thank you

gregpilot said:
Hi is there an issue with the web site? Running on the desktop, and on the device, same result, no output.
Thank you
Click to expand...
Click to collapse
On my side it works normally... You can use nvsofts' one since results are same

Question Network Debrand

Hi all,
New to Realme, I've only really dealt with more mainstream devices here in the UK (Samsung/Sony/Motorola etc)
I have a TIM Italy branded C21 - RMX3201 that I was hoping to remove the branding for a 'Global/EU' SIM free variant of firmware. First question does anyone know if its possible? or has done it? with it being a MTK chipset will it be a SP Tool flash as other devices with their chipsets (CAT, some Motos etc?)
Build - RMX3201_11_A.36
Baseband - M_V3_P10,M_V3_P10
Kernel 4.9.190
Color OS - V7
Android 10
Any help would be gratefully received

Laird_Attwood said:
Hi all,
New to Realme, I've only really dealt with more mainstream devices here in the UK (Samsung/Sony/Motorola etc)
I have a TIM Italy branded C21 - RMX3201 that I was hoping to remove the branding for a 'Global/EU' SIM free variant of firmware. First question does anyone know if its possible? or has done it? with it being a MTK chipset will it be a SP Tool flash as other devices with their chipsets (CAT, some Motos etc?)
Build - RMX3201_11_A.36
Baseband - M_V3_P10,M_V3_P10
Kernel 4.9.190
Color OS - V7
Android 10
Any help would be gratefully received
Click to expand...
Click to collapse
Hi, in fact i have no idea.
I believe you can get an aswer from realme community servers, i will sent you discord and reddit links of them.
Remember that, this community groups has no staff from realme.

Yes it can be done. Will be able to find details here in XDA, it is engineernetwork mode and I believe it's changing or unlocking country codes/network.
Is simple enough to do, will put a care package together and instructions. It's same process for all realme/oppo. Just not in front of my computer at moment

@Laird_Attwood
1 Activate developer mode
2 Enable usb debugging
3 Download Oppo_Free_Unlock_v1.0.zip file from xda
4 In Windows 10 device property management - NETWORK ADAPTER - THEN UNDER ADVANCED - "network Address" entered code: 3497F6990DEA7 - IF THIS DOES NOT WORK - THEN ADD NEW LEGACY HARDWARE - NETWORK ADAPATER - MICROSOFT - KM-TEST LOOPBACK AND THEN REEPEAT ABOVE NETWORK ADDRESS FOR KM-TEST ADAPTER
5 Connect Find X2 Pro is in MTP
6 Open file "Oppo_Free_Unlock_v1.0.zip"
7 Open Sec5.exe
8 Click unlock
9 Number on the left and ok on the right
10 Click Stop unlock
11Closed Windows Sec5.exe
12 Disconnect Oppo
13 Open dialer anc type * # 3954391 #
14 "Switch" appears for a moment
15 Enter * # 391 #
any troubles flick me a message or reply

smiley.raver said:
@Laird_Attwood
1 Activate developer mode
2 Enable usb debugging
3 Download Oppo_Free_Unlock_v1.0.zip file from xda
4 In Windows 10 device property management - NETWORK ADAPTER - THEN UNDER ADVANCED - "network Address" entered code: 3497F6990DEA7 - IF THIS DOES NOT WORK - THEN ADD NEW LEGACY HARDWARE - NETWORK ADAPATER - MICROSOFT - KM-TEST LOOPBACK AND THEN REEPEAT ABOVE NETWORK ADDRESS FOR KM-TEST ADAPTER
5 Connect Find X2 Pro is in MTP
6 Open file "Oppo_Free_Unlock_v1.0.zip"
7 Open Sec5.exe
8 Click unlock
9 Number on the left and ok on the right
10 Click Stop unlock
11Closed Windows Sec5.exe
12 Disconnect Oppo
13 Open dialer anc type * # 3954391 #
14 "Switch" appears for a moment
15 Enter * # 391 #
any troubles flick me a message or reply
Click to expand...
Click to collapse
I have tried this on the Oppo Find X3 Pro its found the digits in the left side of the program but wont unlock can you look in to this please ?

Disconnect your ethernet adaptor, then once km test loopback has connect as a network , then re enable the ethernet cable. Or use your mobile phone as a tethering to your computer or a wifi adpater and it will go through