Ok, so this isn't anything special...yet. But I do intend to see how much more I can find out over the weekend.
I decided I was gonna see what's under that back panel, so here are some pics, and what I did.
What you need:
-Patients
-Precision Screw Driver (Philips Head)
-Thin Guitar Pick
1st, Remove the top and bottom covers on the phone. This will expose 4 of the 5 screws you need to remove.
2nd, Peel up the bottom label. BE VERY CAREFUL AND VERY SLOW!!! This will expose the 5th screw to remove the back.
***This bottom label is designed to snap away from itself if removed too quickly. I don't know if this would void anything, so don't chance it.
3rd, Using a guitar pick on the HDMI PORT SIDE of the phone, carefully wedge open the seam down the side of the phone. Once this is done completely on that side, the backplate just kinda peels off, so to speak.
It appears as if there are a total of 6 water indicator stickers once the cover is removed.
NOTE: When you put the backplate back on, there is a single snap just above the camera that has to be secured before the top cover will go back on properly. BE CAREFUL, it looks like it can break easy.
Good tutorial. At least we have a tutorial on how to take apart the back of the ion. Hopefully there's future battery replacements that offer better battery life so we can use this method to change the batteries or other needed purposes.
Do you think it is possible to change the battery? It'll be great knowing that once this battery died I can buy a replacement.
Sent from my LT28i using xda app-developers app
Also, it looks like our phone is built like a tank! I think a lot of phones just have one layer of plastic
Sent from my LT28i using xda app-developers app
Getting to the battery is my goal. I've a second part-time job at a battery shop, so... once someone or myself can get to it, I can see if it can be ordered or if we can build it in the lab.
Sent from my LT28at using xda app-developers app
tribalartgod said:
Getting to the battery is my goal. I've a second part-time job at a battery shop, so... once someone or myself can get to it, I can see if it can be ordered or if we can build it in the lab.
Sent from my LT28at using xda app-developers app
Click to expand...
Click to collapse
UPDATE: This coming weekend, I will be taking this phone apart some more. Any warranty stickers I encounter, if any, will not be touched unless I can do so and still be able to reapply it. I will be taking pictures of everything I do, and will post them here. Stay tuned...
Sent from my LT28at
I have do it before. My Phone is dead to "brick", I removed the battery cables and repair
vuhien said:
I have do it before. My Phone is dead to "brick", I removed the battery cables and repair
Click to expand...
Click to collapse
Did you happen to take photos? If so, would you share them with us?
Sent from my LT28at
tribalartgod said:
Did you happen to take photos? If so, would you share them with us?
Sent from my LT28at
Click to expand...
Click to collapse
At Flash, my battery level is too low to result in dead phone, I tried to fix by simply removing the hardware but it's a big mistake, just flash the full charge the battery when everything is all right, no need to remove and reinsert the battery cable. sorry I do not have time yet capture
So I was having major trouble and decided to try and take the battery out. got one step further than tribalartgod, and took off the second plate by removing the torx screws (t5 fyi) and got nowhere after that. any who, Just thought I'd post the pic of whats next.
btw got the phone back up and running just had to charge a long time and reflash.
Did they have to have the top of the plastic connector open almost like a lid to pull out the ribbon? That's how most all of them are on the PSP. Maybe the same on the phone. Thanks for the pics.
Sent from my LT28at
Sorry, I didn't think to take any pictures of the plastic backing part. But, no I didn't have to remove any ribbons. Its just another plastic backing. I think there might have been some connectors but they were just contacts, no pins or plugs.
Oh and make sure the sim card and removable memory are out when you remove the plastic because they slide through the plastic into the slots. Its helpful to have a snap tool or guitar pick. I started from the bottom of the phone near the camera button and worked my way up and around. These snaps are harder to pop off too.
Nice. I appreciate the tip. I'm so behind on things I want to and need to do with this phone. I only get about 4 hours a week I can play, so.. I'll get to do everything I say I will, it just may be delayed.
Sent from my LT28at
test points?
after looking at both of your brave pictures. i noticed a slot under the sticker on the right side, in tribalartgod's pics, where you can see contacts. also in Guregnack's pics the plastic is gone and contact points are exposed.
could these be test points for SETool unlocking?
i have the at&t ion an have no 'official' unlock method. have seen the paid test point method for alot of other xperia's. i got my ion for free so,why not pay to unlock it.
thanks for the nice pics how about a video next time you get brave.
any idea what the prongs by the flash are for? look a bit similar to SGS3's wireless charging cover contacts. I could be hallucinating though.
Guregnack said:
So I was having major trouble and decided to try and take the battery out. got one step further than tribalartgod, and took off the second plate by removing the torx screws (t5 fyi) and got nowhere after that. any who, Just thought I'd post the pic of whats next.
btw got the phone back up and running just had to charge a long time and reflash.
Click to expand...
Click to collapse
I actually just reflashed mine, myself. Sucks.
I notice in your photos there appear to be two more water indicator sticks. If they are, I say bravo to Sony... Placing those at various levels could tell them the extent of water damage. Pretty smart move if you ask me.
twent4 said:
any idea what the prongs by the flash are for? look a bit similar to SGS3's wireless charging cover contacts. I could be hallucinating though.
Click to expand...
Click to collapse
Might be for camera auto focus emitter ring around lense
~Jaramie
from my LT28at ION rooted and eating an Ice Cream Sandwich
ToledoJab said:
Might be for camera auto focus emitter ring around lense
~Jaramie
from my LT28at ION rooted and eating an Ice Cream Sandwich
Click to expand...
Click to collapse
most likely its nfc antenna connectors ,
nfc tags are working only if i hold it just right next to camera
im having problem removing the bottom cover. it seems tightly secure; i dont really want to scratch anything lol.
I just took out the back cover and see in the little bit that's see through on top of the white sticker label (the rectangle see thorugh thing that is covered by some orange plastic) what is that? because mine looks like it's broken but it might be just like that abnyways... It doesn't look neat compared to the others and that it looks like it's burnt or something but I'M NOT SURE, cant see it properly
My phone can't turn on, see http://forum.xda-developers.com/showthread.php?t=1896123 for my problem...
I can't take picture cause I don't have camera that can focus that close :/
Related
Hi,
I can't remove the battery cover, which I will need to be able to do as I want to install a custom rom, but if it gets stuck in a boot loop I'll be completely stuck.
And I know the design is poor (i.e everyone has issues), but only one person has ever been able to do it (something like the 15th person, in the 6th shop I took it to, cause you need to take the cover off to unwrap the battery on first boot).
Any techniques or anything? It literally seems stuck. The guy that did it took it out the back and came back with it off.
Tamen said:
Hi,
I can't remove the battery cover, which I will need to be able to do as I want to install a custom rom, but if it gets stuck in a boot loop I'll be completely stuck.
And I know the design is poor (i.e everyone has issues), but only one person has ever been able to do it (something like the 15th person, in the 6th shop I took it to, cause you need to take the cover off to unwrap the battery on first boot).
Any techniques or anything? It literally seems stuck. The guy that did it took it out the back and came back with it off.
Click to expand...
Click to collapse
+1
I also would like to know if there is special way to do it.
I once drop my phone and the battery cover come out a little bit from its position. I try to put it back into its position. BUT couldn't do so. Than I try pull out the cover. Than BAMMMM!!! its broke!!!
Buy new cover, but costly..
Buying a new cover is only any use if you can get the original off. And although I don't know the technique, even people that did couldn't get it off - I was shown 2 other DHDs that could be done with a minimal amount of fiddling (i.e. mine is way worse than it should be). I had about 10 people say "oh yeah mate it's easy, you just do thi.. wait... wow, that's like glued on or something".
The battery cover is a good design. Had to take out the battery number of times and it always goes off and on as intended to, perfect.
I had another mate try to do it and he just couldn't figure it out. Wtf has this world come to??
If you look there is a little space where you put your nail and then pull it out with a bit of force and putting it in is even easier!
Honestly, so many threads/posts about this...
Sent from my Desire HD using Tapatalk
ErOR22 said:
The battery cover is a good design. Had to take out the battery number of times and it always goes off and on as intended to, perfect.
I had another mate try to do it and he just couldn't figure it out. Wtf has this world come to??
If you look there is a little space where you put your nail and then pull it out with a bit of force and putting it in is even easier!
Honestly, so many threads/posts about this...
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
I'm not thick, you would have to be stupid to not realise there's a place for your nail - the problem is that my cover wouldn't budge (clearly you didn't read the OP - I took it to 5 different PHONE SHOPS - and only one guy could do it. I've opened other DHDs, just not mine. Until today...
Got a friend to try - he spent about 5 minutes but couldn't, but he must have budged it as I could get my nail into the corner - (to the left of the bit you're supposed to do) and hook it up from there - sorted
eeeeehhh RELAXXX lol
one moment...... are you talking about you can´t open the battery cover of your DHD?
REALLY YOU CAN´T?
I'd be darned if people find the DHD battery hatch to open easily... I even got the under side of my nails(the index finger) bleed trying to pry it open the first time I tried to charge the phone.
SERGI.3210 said:
eeeeehhh RELAXXX lol
one moment...... are you talking about you can´t open the battery cover of your DHD?
REALLY YOU CAN´T?
Click to expand...
Click to collapse
Couldn't, now can I felt really embarrassed going into a shop saying "I can't take the cover off" But then they were like... neither can we haha. It's been loosened now and can be done with a bit of technique.
It can be that it sounds absurdity but here I leave the guide of DESIRE HD, there it is written like to remove the cover.
In a Spanish forum i was read that there are people who helps herself with a credit card or a small screwdriver...
i think its solved
http://dl4.htc.com/web_materials/Manual/HTC_Desire_HD/HTC_Desire_HD_WWE_UM.pdf
plskillme said:
I'd be darned if people find the DHD battery hatch to open easily... I even got the under side of my nails(the index finger) bleed trying to pry it open the first time I tried to charge the phone.
Click to expand...
Click to collapse
I can remove the battery cover from my DHD with one hand - although I end up flicking the cover several feet.
Don't get me wrong, when I first got mine it was so tight I nearly snapped it. It's by no means loose now but it has got a little easier.
I don't like my fingernails to reach some ugly lengths(like girly nail lengths) I usually keep my fingernails short b/c I have some sort of OCD... ):
plskillme said:
I don't like my fingernails to reach some ugly lengths(like girly nail lengths) I usually keep my fingernails short b/c I have some sort of OCD... ):
Click to expand...
Click to collapse
Um, ok, thanks for sharing that. Useful to know.
Hey all. I dismantled my Galaxy Nexus in hopes to fix my vibration squeal, and when I opened it up, I found tiny green stickers that are planted inside the housing. I attempted to remove one but they are stuck there pretty dang good. Check it out.
Plus, it's not a bad idea to take it apart just to clean it. Mine was dusty so I'm glad I did it. Make sure that if you do do this that you do it in an area that's safe from ESD, which electro-static discharge. That last thing you or I would want it to have your Galaxy Nexus be fried.
Anyway, what do you think these green stickers do and why are they there? To me it makes the phone kind of cheap because of this. But no bother.
Thanks.
Sent from my iPhone using Tapatalk
It's possible that they are water damage stickers.
Also, I do not recommend people start ripping apart their Galaxy Nexus phones. This voids warranty and it's possible that there are parts in the phone that get snapped or moved if user opens it that will be noticed by the tech support technician.
Dust is not a problem for mobile phones, since modern phones don't have ventilation systems that depend on flow of cool air. Your phone would have to be in use in bad conditions for a very long time to need any internal 'dusting'.
kristovaher said:
It's possible that they are water damage stickers.
Also, I do not recommend people start ripping apart their Galaxy Nexus phones. This voids warranty and it's possible that there are parts in the phone that get snapped or moved if user opens it that will be noticed by the tech support technician.
Click to expand...
Click to collapse
They're not liquid sensors. Take out your battery and you'll see a white sticker with 16 purple x's. That's the liquid contact indicator. The green stickers serve another purpose which I have yet to muster up a reason for. Taking apart your device for exploration is not a big deal if you know what you're doing. Obviously don't literally rip the phone apart, come on. Be smart about it. Also, there are no internal warranty void stickers inside, so you have nothing to lose if your hands are skilled.
Sent from my iPhone using Tapatalk
Possibly a refurb by some slight chance...maybe your particular phone didn't pass one of the tests and had to be fixed...NFC maybe...or IDK?
Also, lol you're posting from an iPhone.
Smokeey said:
Possibly a refurb by some slight chance...maybe your particular phone didn't pass one of the tests and had to be fixed...NFC maybe...or IDK?
Also, lol you're posting from an iPhone.
Click to expand...
Click to collapse
No way no how is this refurbished.i would be very sad if that were the case. I bought it back in November. Had the Samsung seal of greatness on it still intact. So I doubt it's refurbished. I took it apart to just check it out for myself, and it was toooooo easy to do.
Yeah ha, sending from an iPhone indeed. I have both units. Both I love equally. Haha.
Sent from my iPhone using Tapatalk
maybe since you got it open you can check to see what the rattle is behind the camera? or maybe it is the camera sensor itself? dunno, but I noticed it the first day I bought it and seem just slightly annoyed by it. If you hold the phone in your hand and tap your finger near the camera lens you'll see what I'm talking about. Would be nice to know what it is.
automaddux said:
maybe since you got it open you can check to see what the rattle is behind the camera? or maybe it is the camera sensor itself? dunno, but I noticed it the first day I bought it and seem just slightly annoyed by it. If you hold the phone in your hand and tap your finger near the camera lens you'll see what I'm talking about. Would be nice to know what it is.
Click to expand...
Click to collapse
It's the autofocus mechanism.
Sent from my iPhone using Tapatalk
It would be better if you would upload a better quality pic with both the plastic cover with the green stickers and the part on which is mounted.
maybe this is NFC transmit like on Blackberry Bold 4....
ztm.000 said:
They're not liquid sensors. Take out your battery and you'll see a white sticker with 16 purple x's. That's the liquid contact indicator. The green stickers serve another purpose which I have yet to muster up a reason for. Taking apart your device for exploration is not a big deal if you know what you're doing. Obviously don't literally rip the phone apart, come on. Be smart about it. Also, there are no internal warranty void stickers inside, so you have nothing to lose if your hands are skilled.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The GSM Nexus has no warranty void stickers or water indicators. The stickers may be tiny antennas
Sent from my Galaxy Nexus using Tapatalk
No clue what they're for, but yours isn't the only device with them (so I doubt it was a refurb, as previously suggested).
(via http://www.ifixit.com/Teardown/Samsung-Galaxy-Nexus-Teardown/7182/1 )
It looks like they are possible being used as a buffer to protect the way the case rubs on some of the components. Possibly like an antistatic protectant
Sent from my Samsung Galaxy Nexus - Verizon 4G LTE.
It's probably electrical insulation.
lol as if they would be slipping refurbs back into the market as new phones! Not having a great pic to base it on these are either shorting or wear protection
Pacifik said:
It's probably electrical insulation.
Click to expand...
Click to collapse
This.
Look what's under the tape .. you can see metallic circuits under all of them.
-> http://guide-images.ifixit.net/igi/qqCnaRuXSHnMhDXJ.huge
so, i've got way too much time on my hands and was looking for a brushed aluminum style back cover to match our cameras online. I could find nothing. i started looking into the process of melting aluminum, which is surprisingly easy, as is creating the brushed effect. as of right now i currently have my back cover pushed into some drywall mud (no modeling clay) and drying so that i can form the second half of my mold. just thought i would inform you guys of my insanity!
TL;DR : trying to make an aluminum back cover from scratch.
extravillager said:
so, i've got way too much time on my hands and was looking for a brushed aluminum style back cover to match our cameras online. I could find nothing. i started looking into the process of melting aluminum, which is surprisingly easy, as is creating the brushed effect. as of right now i currently have my back cover pushed into some drywall mud (no modeling clay) and drying so that i can form the second half of my mold. just thought i would inform you guys of my insanity!
TL;DR : trying to make an aluminum back cover from scratch.
Click to expand...
Click to collapse
I wonder how that will work as far as cooling is concerned. Post some pics when you've got it all set.
dbjungle said:
I wonder how that will work as far as cooling is concerned. Post some pics when you've got it all set.
Click to expand...
Click to collapse
I think antenna reception would be a bigger concern. Still, I would totally plunk down some cash to buy one, if you figure out how to do something easily repeatable...
Keep us posted, this sounds like a really cool idea!
i'll definitely let you guys know how it goes. good to know people care because it will keep me from stopping half-way through. haha. i'll probably do most of it this weekend. the drywall mud was pretty dumb, im probably going to use a greensand mold and see what i can do with that. ill just do the dividing line along the back of the back cover.
the bad news: greensand is hard as hell to find at stores or anything
good news: i have scrap aluminum, and i can borrow my girlfriend's dad's propane torch. i went out and bought plaster of paris tonight. Going to set up the mold tomorrow morning and once it is hardened i can start the process of melting+pouring+setting the aluminum in the mold.
turns out walmart sells plaster of paris in a big purple box covered in flowers, which made it somewhat difficult to find considering nobody there knew what it was....
bottom half of the mold is set and drying. here's hoping i can get it back out. haha.
Looks like it might be kinda hard making sure the holes for the speaker are cut out properly!
i made sure the plaster got far enough into the holes to make an imprint, but not far enough to seal the back to the mold.
extravillager said:
i made sure the plaster got far enough into the holes to make an imprint, but not far enough to seal the back to the mold.
Click to expand...
Click to collapse
thats good! Do you have a dremel or something else to smoothen out edges? Molds typically create a lot of extra garbage on the side that needs to be cut off... Your using aluminum right?
If yours comes out good and doesnt hinder the signal quality too bad, i think i might do the same
PMad said:
thats good! Do you have a dremel or something else to smoothen out edges? Molds typically create a lot of extra garbage on the side that needs to be cut off... Your using aluminum right?
If yours comes out good and doesnt hinder the signal quality too bad, i think i might do the same
Click to expand...
Click to collapse
yeah, i've got plenty of tools and scrap aluminum. depending on how well it turns out/how it affects the phone i may offer to sell them to people on here.
that isnt to say that buying one will be the only way to get one. I will be sure to post a full and detailed tutorial when i am finished for anyone adventurous enough to attempt it.
No to be a pessimist but did you notice that there is something on the original cover that seems to be taped in the cover? I figure an antenna?
How will you do it?
sent from LG OPTIMUS LTE using Tapatalk
I've noticed no difference in signal quality with the back cover removed so I don't think the back cover's antenna helps a whole lot lol.
Sent from my LG-P930 using XDA
stemalo said:
No to be a pessimist but did you notice that there is something on the original cover that seems to be taped in the cover? I figure an antenna?
How will you do it?
sent from LG OPTIMUS LTE using Tapatalk
Click to expand...
Click to collapse
i've been without a back cover while it is setting for about a day now and haven't noticed any adverse effects.
bottom mold is done, and looking pretty good besides a few air bubbles that i need to fill.
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
About the sticker being an antennae, that never crossed my mind. For some reason I always assumed it was something to distribute heat away from the battery.
Both possibilities seem very plausible though.
schwin97 said:
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
Click to expand...
Click to collapse
it crossed my mind. however, like i said earlier, i was using the phone without a back for over a day and a half and didnt notice any adverse side effects (aside from the battery falling out.)
schwin97 said:
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
Click to expand...
Click to collapse
I think thats for NFC
nfc would be nice. How do we use it if its there?
Sent from my LG-P930 using XDA App
So on my 3rd Lumia 900, I noticed the sim slot tray wasn't flush with phone... I never did get that fixed but whatever...
Anyways... I removed the tray and noticed 2 things 1) a stricker with some numbers, and 2) a second sticker that is actually used to mask some type of button or something. I didn't notice this on the first 2 devices I had (maybe they didn't have it, or maybe I didn't notice). I had to remove the plastic thick sticker on the right side to see the button or whatever it is... Took me forever to put it back on in place properly.
Anyone know what this is?
IIRC, it covers the slot that allows you remove the locking pin that retains the screen, so you can get inside the phone. You can use the SIM removal tool as a lever to remove the pin, then use a plastic pry tool to remove the screen.
This will void your warranty.
DONT TOUCH IT!!!
if you absolutely must touch it, be aware that your warranty is at stake. if you aren't familiar with the inner workings of a handset, its best to leave it alone.
You wouldn't start poking around inside of your TV if you found a small hole.
Zhariak said:
So on my 3rd Lumia 900, I noticed the sim slot tray wasn't flush with phone... I never did get that fixed but whatever...
Anyways... I removed the tray and noticed 2 things 1) a stricker with some numbers, and 2) a second sticker that is actually used to mask some type of button or something. I didn't notice this on the first 2 devices I had (maybe they didn't have it, or maybe I didn't notice). I had to remove the plastic thick sticker on the right side to see the button or whatever it is... Took me forever to put it back on in place properly.
Anyone know what this is?
Click to expand...
Click to collapse
If you press that button, the Lumia turns into an iPhone 5
alodar1 said:
If you press that button, the Lumia turns into an iPhone 5
Click to expand...
Click to collapse
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Actually.....it could void your warrently....if they checked that. Removing stickers on a handset is usually an indicator of a stay away area near hear...stay away.....
When they swapped by phone last week because of the vibrator....they definitely opened the sim slot and looked in...I had no idea why....but I do now.
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Removing the sticker is what lets them know that you voided the warranty.
Megabunny said:
You wouldn't start poking around inside of your TV if you found a small hole.
Click to expand...
Click to collapse
Actually, I would. It's no wonder my parents got grey hair so quickly.
Zhariak said:
Better not touch it than hahaha
Thanks guys, by removing that little sticker thing though, that wouldn't affect warranty would it? I didn't touch anything below it..
That's cool they made it easily serviceable though!
Click to expand...
Click to collapse
Some stickers....whenyou remove them....say VOID VOID VOID. All you can say is OPPS OPS OPS OPS...because the they are 1 way stickers...usually....won't go back on.
Want to know whats under the sticker....go to YouTube and find the break down video....
Weird,
I removed the sticker a few times to look in, until finally posting this, each time I was able to put it back. It's NOT one of those tamper proof stickers, it just covers that hole...
Zhariak said:
Weird,
I removed the sticker a few times to look in, until finally posting this, each time I was able to put it back. It's NOT one of those tamper proof stickers, it just covers that hole...
Click to expand...
Click to collapse
This thread did make me go look. got the flash light out, the reading glasses, I'm looking inside there....and boom....I see the darn this right on the top. First glance....this is a "You void your warrenty" type of sticker. But thats my opinion. The one of the Dell Venue Pro was black and barely noticable...until you pull it back and it left its surprise.....but then you were looking for the SD card....
Strange...but cool to know.
I have to admit, the same day the YouTube video came up showing how to dismantle the phone, I went ahead and did it. It's pretty slick the way it's held together.
I wanted to see how the Vibrator Motor was installed to see if there was a good reason for the rattle and possibly a fix. Unfortunately, it's under the Main Board, and I was not that enthusiastic, so never got to see it. But I can confirm it's the Motor, or something close to it, and NOT the camera lense. I ran the vibrator while the phone was open so I could find the source. Again, it's under the Main Board, so could not see the actual rattle source.
I'm wondering if it might be one of the metal plates that clip on to cover the IC Chips, thus the different rattle on different phones. All the other parts seem to be solidly mounted.
PS: From what I can tell, there's no sign that the sticker had been lifted after I put it back in place.
SuperSport said:
I have to admit, the same day the YouTube video came up showing how to dismantle the phone, I went ahead and did it. It's pretty slick the way it's held together.
I wanted to see how the Vibrator Motor was installed to see if there was a good reason for the rattle and possibly a fix. Unfortunately, it's under the Main Board, and I was not that enthusiastic, so never got to see it. But I can confirm it's the Motor, or something close to it, and NOT the camera lense. I ran the vibrator while the phone was open so I could find the source. Again, it's under the Main Board, so could not see the actual rattle source.
I'm wondering if it might be one of the metal plates that clip on to cover the IC Chips, thus the different rattle on different phones. All the other parts seem to be solidly mounted.
PS: From what I can tell, there's no sign that the sticker had been lifted after I put it back in place.
Click to expand...
Click to collapse
I might do this when its out of warranty.... too knew yet to blow that!
I had my new xperia play delivered yesterday, and while I'm really pleased with it overall, there's one thing that's slightly offputting. The right trigger button feels far looser than the left, and requires much more force to register when playing a game etc. It also seems to be sitting slightly higher up than the left.
Is there any way to adjust the 'tightness' of the trigger? It's not the end of the world obviously, but it is quite annoying for a new phone, particularly as it's a button that is going to be used regularly.
Apologies if this question has already been asked, but I couldn't find anything about it on the forum.
The screw on the inside adjacent to the button can influence it, but do not screw it too much because might will cause it to become lose. You will need a size T5 torque bit.
eksasol said:
The screw on the inside conjunction to the button can influence it, but do not screw it too much because might will cause it to become lose. You will need a size T5 torque bit.
Click to expand...
Click to collapse
Do you mean the screw directly behind the trigger, underneath the battery cover? I thought that could be related, but the screw appears as if it is already as tightly screwed as possible?
theotakuoverlord said:
Do you mean the screw directly behind the trigger, underneath the battery cover? I thought that could be related, but the screw appears as if it is already as tightly screwed as possible?
Click to expand...
Click to collapse
I haven't look at it very much, but if you unscrew them all and pry the back off, you will be exposed to the entire mechanism and see if you can adjust it.
eksasol said:
I haven't look at it very much, but if you unscrew them all and pry the back off, you will be exposed to the entire mechanism and see if you can adjust it.
Click to expand...
Click to collapse
I think I'll try this, though I'm not really enthusiastic about taking the back off entirely. Would this invalidate my warranty?
theotakuoverlord said:
I think I'll try this, though I'm not really enthusiastic about taking the back off entirely. Would this invalidate my warranty?
Click to expand...
Click to collapse
Well in that case maybe you should get an exchange, but really they would hardly notice if you just unscrew it and put it back and its quite easy to do. If you bought it new and the factory sticker on the box was not removed, then it wouldn't be acceptable to have this issue. If you didn't have a factory sticker then its wasn't new.
Unfortunately this is not uncommon, my R trigger is *slightly* more sensitive than my L trigger, anyone playing on my phone would never notice it unless they were purposely looking for something to complain about. My suggestion to you is to hold down the R button and insert the edge of a trading card and run it thru gently taking any dust or dirt with it, then get a damp microfiber, take off the battery cover and wipe down the R button. I do this every couple of months to keep my triggers clean
Sent from my R800x using xda app-developers app
eksasol said:
Well in that case maybe you should get an exchange, but really they would hardly notice if you just unscrew it and put it back and its quite easy to do. If you bought it new and the factory sticker on the box was not removed, then it wouldn't be acceptable to have this issue. If you didn't have a factory sticker then its wasn't new.
Click to expand...
Click to collapse
It does have the factory sticker, but getting a replacement this early on is quite annoying. I think I'll try adjusting it, and if that has no effect, I'll get it replaced. Thanks for your help.