Develop Bugs

Error Flashing OTA?

I downloaded the 4.1.1 update from the thread (link) but I am getting the error in the attached photo.
What is going on here??

I managed the same error by flashing stock Rom 4.0.4 and use the update trick here in forum to get 4.1.1. I think it was my rooted phone which breaks ota update.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2

it fail on the app ApplicationProvider.apk
probably u have some mod on ur rom? or a deodexed rom? the ota requires a stock rom

andQlimax said:
it fail on the app ApplicationProvider.apk
probably u have some mod on ur rom? or a deodexed rom? the ota requires a stock rom
Click to expand...
Click to collapse
Yes but *why* is it failing on ApplicationProvider.apk and how do I fix it?
No, it's 100% the leaked stock build of Jelly Bean, the very first one that came out. 100% stock.
What is causing the OTA to not work?

Paul22000 said:
Yes but *why* is it failing on ApplicationProvider.apk and how do I fix it?
No, it's 100% the leaked stock build of Jelly Bean, the very first one that came out. 100% stock.
What is causing the OTA to not work?
Click to expand...
Click to collapse
u flashed the leaked ota? or a rom based on it?
i think u have a custom rom..(a deodexed one)
anyway..much easy to flash a stock 4.1.1 jelly bean rom on top of it..

andQlimax said:
u flashed the leaked ota? or a rom based on it?
i think u have a custom rom..(a deodexed one)
Click to expand...
Click to collapse
I'm pretty sure it was stock though, but how do I tell?
anyway..much easy to flash a stock 4.1.1 jelly bean rom on top of it..
Click to expand...
Click to collapse
Can you link to one? I thought the one in the OP I linked to WAS a stock 4.1.1 rom.

Anyone?

So you haven't changed the radio or any system apps at all?

Update the bootloader to PRIMELA03 or newer and give it a try. Make sure the hash MD5 is the same as the thread where u downloaded it from.

martonikaj said:
So you haven't changed the radio or any system apps at all?
Click to expand...
Click to collapse
No. I disabled a few, like Google Currents, if that makes a difference?

Bootloader needs to be PRIMELA03 and radio needs to be XXLA2
the 4.1 zip didnt come with those and they had to be done manually
download this and extract it: https://dl.google.com/dl/android/aosp/takju-imm76i-factory-e8c33767.tgz
for the fastboot commands use this:
fastboot flash bootloader bootloader-maguro-primela03.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxla02.img

New Update Message

Today I received the new update message, last time it tried to install it itself after 3 times postponed. But for for reason it failed. Is it because the phone is rooted ?
What if AT&T release the Jelly bean update in the future and I want to install it. How do I fix the update error message? Do I need to un-root the phone first ?

benzso63 said:
Today I received the new update message, last time it tried to install it itself after 3 times postponed. But for for reason it failed. Is it because the phone is rooted ?
What if AT&T release the Jelly bean update in the future and I want to install it. How do I fix the update error message? Do I need to un-root the phone first ?
Click to expand...
Click to collapse
+1. I also have stock LEM firmware and I am rooted(everything is stock though). When I try to update to LG1 via OTA, it downloads the update and reboots in CWM and fails to update. When I plugin via Kies to update, it times out.
Is there any way to update to LG1 when you are rooted?

AlwaysNoob said:
+1. I also have stock LEM firmware and I am rooted(everything is stock though). When I try to update to LG1 via OTA, it downloads the update and reboots in CWM and fails to update. When I plugin via Kies to update, it times out.
Is there any way to update to LG1 when you are rooted?
Click to expand...
Click to collapse
Correct me if I'm wrong but it should work if you have the stock recovery - which in your case you don't but not necessarily in the OP's case. Unless the OP wasn't perfectly clear.
Maybe you need to go back to stock first?

saj222 said:
Correct me if I'm wrong but it should work if you have the stock recovery - which in your case you don't but not necessarily in the OP's case. Unless the OP wasn't perfectly clear.
Maybe you need to go back to stock first?
Click to expand...
Click to collapse
Is there any way I can remove CWM and go back to stock recovery? I rooted my phone using this easy guide http://galaxys3root.com/galaxy-s3-r...gh-t999sgh-i747sph-l710-fail-proofnoob-proof/

I am not worry about the minor update from AT&T, we all expect to get Jell Bean soon. Just want to make sure we can download the update and install it properly without any errors. So should we go stock? What will be the steps? Download the stock firmware and use Odin flash it back?

I wouldn't worry about the official update. Usually in a day or two of official release, there will be an official firmware in package in the development section.

Did you mean we can just download the custom jelly bean firmware and install it as custom rom instead of the official one from AT&T? I think that make sense.
mrhaley30705 said:
I wouldn't worry about the official update. Usually in a day or two of official release, there will be an official firmware in package in the development section.
Click to expand...
Click to collapse

When its released, yes. That's one reason there are threads just for stock firmware.

How can i go back to ICS

how do i go from the official sprint jelly bean update back to the last official ICS update from sprint.

ariel123 said:
how do i go from the official sprint jelly bean update back to the last official ICS update from sprint.
Click to expand...
Click to collapse
ODIN is you best friend in these circumstances:
Click Here
Then the stock LI3 update:
Click Here
And Drivers if you dont have them:
Click Here
and just follow this tut:
http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/
and you should be back to square one.
Oh, and there is apparently an issue with ODIN fashing modem higher than LEN.
EDIT: You can install a custom recovery to flash the LI3 modem.
I can help you with that also. Let me know if you have any problems.
EDIT #2: (I keep remebering stuff) If you have a custom recovery you can skip all that jazz and just flash LI3 this way:
http://forum.xda-developers.com/showthread.php?t=1743923

GRock84 said:
ODIN is you best friend in these circumstances:
Click Here
Then the stock LI3 update:
Click Here
And Drivers if you dont have them:
Click Here
and just follow this tut:
http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/
and you should be back to square one.
Oh, and there is apparently an issue with ODIN fashing modem higher than LEN.
EDIT: You can install a custom recovery to flash the LI3 modem.
I can help you with that also. Let me know if you have any problems.
EDIT #2: (I keep remebering stuff) If you have a custom recovery you can skip all that jazz and just flash LI3 this way:
http://forum.xda-developers.com/showthread.php?t=1743923
Click to expand...
Click to collapse
hey thanks i just want to go back to ics and unroot inorder to do the jb update ota. which method do you think is easiest

ariel123 said:
hey thanks i just want to go back to ics and unroot inorder to do the jb update ota. which method do you think is easiest
Click to expand...
Click to collapse
Oh well in that case just follow the steps in the tut i recommended. Itll take you back to stock. You'll need the stock recovery installed to update also, so if you have a custom installed just flash the stock recovery with ODIN from this thread along with the stock rom. (recovery is at the bottom of the OP)
after the install and your phone boots you should get the prompt to update

GRock84 said:
Oh well in that case just follow the steps in the tut i recommended. Itll take you back to stock. You'll need the stock recovery installed to update also, so if you have a custom installed just flash the stock recovery with ODIN from this thread along with the stock rom. (recovery is at the bottom of the OP)
after the install and your phone boots you should get the prompt to update
Click to expand...
Click to collapse
I second that with one thing changed. Forget the ota from sprint. Too many reasons to fail. Go back to ics like suggested but keep cwm/twrp. And flash this instead
http://www.androidfilehost.com/?fid=9390135922294523494 update with system checks removed. Flash in twrp/cwm
Just my $.02

[Q] 4.3 Stock for Odin?

Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.

n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.

Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.

n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply

|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...

theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.

n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.

What about the recovery? any way to get a stock recovery image?

[Q] Gs3 back to stock help

I'm totally new here, and I need help. I have installed cm11 on my GS3 because the stock 4.3 OTA had terrible battery life. I tried flashing back with odin and it didn't work, I want to go back to stock only because of the 4.4 Kitkat update that should be coming "soon". I am afraid of bricking my device and odin keeps giving me a fail (auth) error :crying::crying::crying:. This is extremely frustrating and I hope you guys can save me. How can I get back to stock without bricking my device?

jgarthwaite77 said:
I'm totally new here, and I need help. I have installed cm11 on my GS3 because the stock 4.3 OTA had terrible battery life. I tried flashing back with odin and it didn't work, I want to go back to stock only because of the 4.4 Kitkat update that should be coming "soon". I am afraid of bricking my device and odin keeps giving me a fail (auth) error :crying::crying::crying:. This is extremely frustrating and I hope you guys can save me. How can I get back to stock without bricking my device?
Click to expand...
Click to collapse
Are you using an AT&T s3? You're probably getting the failure in Odin because you have a 4.3 bootloader and the ROM you're flashing may be trying to downgrade the bootloader.

audit13 said:
Are you using an AT&T s3? You're probably getting the failure in Odin because you have a 4.3 bootloader and the ROM you're flashing may be trying to downgrade the bootloader.
Click to expand...
Click to collapse
Yes, sorry i forgot to specify that I am indeed using an AT&T s3. So if I get the actual 4.3 rom and attempt to flash it, it should work? I just realized the rom I was attempting to flash was 4.1.1. I am just not with it today.

jgarthwaite77 said:
Yes, sorry i forgot to specify that I am indeed using an AT&T s3. So if I get the actual 4.3 rom and attempt to flash it, it should work? I just realized the rom I was attempting to flash was 4.1.1. I am just not with it today.
Click to expand...
Click to collapse
There is no full AT&T 4.3 ROM. AT&T released 4.3 via an OTA update. The full ROM has never been released.

audit13 said:
There is no full AT&T 4.3 ROM. AT&T released 4.3 via an OTA update. The full ROM has never been released.
Click to expand...
Click to collapse
So i am stuck like this until a rom is released or will there not be one. Its not possible to downgrade the bootloader too is it? I am sorry if I am being extremely ignorant and stupid.

audit13 said:
There is no full AT&T 4.3 ROM. AT&T released 4.3 via an OTA update. The full ROM has never been released.
Click to expand...
Click to collapse
Could I flash this? http://forum.xda-developers.com/showthread.php?t=2498233

jgarthwaite77 said:
Could I flash this? http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
You could try, but it recommends starting from a stock ROM or stock-based ROM.
Alternatively, you could flash another custom KK ROM for now and load a custom KK ROM that's based on the official release in the future.
The Valudis and Cyanfox ROMs are supposed to be quite good for battery life.

audit13 said:
You could try, but it recommends starting from a stock ROM or stock-based ROM.
Click to expand...
Click to collapse
I flashed it anyway and it worked. Thanks so much for your help with everything. I am just glad to be back even if it means terrible battery life lol.

jgarthwaite77 said:
I flashed it anyway and it worked. Thanks so much for your help with everything. I am just glad to be back even if it means terrible battery life lol.
Click to expand...
Click to collapse
Glad it worked for you. Enjoy!