Well I tried installing a rom with twrp and for some reason it didn't work .....kept sending me back to twrp....and I had to odin stock and reroot....so I flashed rem ics and come to find out that twrp comes pre installed with the rom.......fuuuu.......the twrp I got doesn't even read my backup for some reason....so is there any way I can get cwm 5 mtd on my phone again or should I just try with twrp....I just don't trust twrp enough to try and flash with it....help? What should I do..
Sent from my SPH-D700 using xda premium
Marcus has linked in his Nyan Colonel thread the flash able to get back to CWM. Just make sure to uncheck inject twrp.
http://forum.xda-developers.com/showthread.php?t=1595289
Sent From My Toro+ via SkyBlue Tapatalk
Related
Help please I tried to flash calkulins 3.0 rom on my fiances phone and now it's stuck at the Samsung logo and I can't restore my stock nandroid... this is what I did I ran calkulins format all .zip then I flashed rom, then the bare rom converter .zip then I flashed the newest modem then rebooted and now phone is stuck in Samsung boot logo.... can anyone help our have suggestions to why this is happening
Sent from my XT912 using Tapatalk 2
It would be helpful to know what rom/kernal/recovery you were running before. Have you tried using download mode?
Sent from my SPH-D710 using xda app-developers app
I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2
Bmali said:
I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Your problem was having the stock kernal to do the flash. Best thing to do know is to flash a el26 CWM kernal using Odin and then reflashing the whole rom set up again.
Sent from my SPH-D710 using xda app-developers app
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Apparently it gets you stuck at the s2 logo.
Sent from the terminus system using quantum entanglement
Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
After looking at your sig what kind of phone was it?
Sent from the terminus system using quantum entanglement
Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2
I'd have thought you would be perfectly fine flashing from el29. So you can't get into Odin mode or CM recovery?
I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
Sent from the terminus system using quantum entanglement
gilbydakid said:
I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
So there are two different recoveries? Is clockwork the most used recovery? I odin backed to el.29 rooted does someone have a link for clockwork? Is rogue recovery not as good as clockwork
Sent from the terminus system using quantum entanglement
Click to expand...
Click to collapse
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2
Bmali said:
Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
I don't think it is possible to have the stock kernel and have rouge recovery. That would mean that you must of had a custom kernal which had included rouge recovery. If you mean you had stock kernel to being with you then you flashed the new rom using androids stock recovery which almost always fails when installing a new rom. The kernel I mentioned , EL26 CWM can be found here, flash it using odin and then reflash your whole rom setup. When you double click the file, it will self extract and a file should appear. That is the file you flash using odin in the PDA slot.
The file I flashed in odin was a rooted el.29 file then I used a tool that installed the el.29 rogue recovery... so I'm confused why a .29 rom won't install over a .29 base?
Sent from my XT912 using Tapatalk 2
Just put the phone back into download mode Odin el.29 rom that you can find in development section then from there just redo it.
Sent from my SPH-D710 using Tapatalk 2
I have already odin back to rooted el.29 but what I'm wondering is why would it change anything? It's already soft bricked once so how would it change this time? Should I be on .26 or .29 to flash a rom?
Sent from my XT912 using Tapatalk 2
I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2
Bmali said:
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
there is a rouge aka team rouge recovery and there is a regular old clock work recovery.
Bmali said:
I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
OK So sounds like (not too sure though) that you used sfhub's Autoroot package to root and add EL29+CWM+Rogue is that right?
Solution to get you back to a working EL29 stock (but rooted) running phone.
Power off the phone.
Go here http://forum.xda-developers.com/showthread.php?t=1433101 download the Download the EL29 full restore One-Click self-extractor and extract the file somewhere.
[Also make sure you downloaded and installed the Samsung drivers from this post, have a GOOD USB cable and that the phone is charged at least 50%]
Then start the file you downloaded: SPH-D710.EL29_CL852097_ROOTED-OneClick.exe
The power on your phone while holding the Volume Down button till you get the confirmation screen and press volume up to accept and enter Download mode.
Connect your phone to the PC and it should show up on some COM port (doesn't matter which one) in the Odin tool.
Press start adn wait till all is done. You will then have a working stock rooted phone.
Then take some time and read through all the stickies and tutorials in this section. Read especially the 'how not to brick' ones!
This phone is very different from the HTCs and Motorolas in how the system(s) is partitioned and how the recovery works.
Then take some more time and read a little more or you will surely turn the phone into an expensive fishing lure.
If you want to flash the FF18 (actual leak build) sfhub has a one click for that too! Safest way to go. And you can use his Autoroot package to add Agat's safe ICS kernel.
Welcome to the E4GT just be careful and you'll have more fun.
By the way Qbking77's videos are SUPER if you are new to this phone!
Yes I'm on stock rooted el.29 now
Sent from my XT912 using Tapatalk 2
Ok so rom manager came pre installed on cm10. I never used it on my old phone because of bricking stories. Question is, is it being used for ota updates for cm10? And is it safe for me to install cwm touch from it?
Sent from my SPH-D710 using Tapatalk 2
Rom Manager and this phone are not a conversation that is even taking place. But as far as the question CM is going back to their own "ota" system and while I am sure CM9 will get it as well CM10 will definitly have ut.
As far as this phone since we are not official yet I wouldn't worry about either at this time. Your updates are here.
Do not install CWM Touch recovery!!! That's asking for a brick. We have TWRP if you want a touch recovery. Aroma packages also give you a customizable touch interface for installing .
Sent from my SPH-D710 using xda premium
Thanks.. that's the answer I was looking for. Is there a flashable zip for the twrp. Recovery? And has it been used with cm10 before?
Sent from my SPH-D710 using Tapatalk 2
SelfElevated2 said:
Thanks.. that's the answer I was looking for. Is there a flashable zip for the twrp. Recovery? And has it been used with cm10 before?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Look in the original development section.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
SelfElevated2 said:
Thanks.. that's the answer I was looking for. Is there a flashable zip for the twrp. Recovery? And has it been used with cm10 before?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
This phone has the recovery packed in the kernel, so you will be looking for a kernel+twrp or kernel+cwm. The recovery will change everytime you flash a different rom or kernel that has a different recovery packed with it. Some people, like me, use el26+cwm for recovery related things, such as wiping, flashing and backing up/restoring. However if you go this route you will need to locate an ics or jb kernel to flash to boot to your rom, if you aren't flashing a rom. You will need to flash a compatible kernel either before making a backup or after restoring a backup to make it bootable. I typically flash the kernel then do the backup so I don't forget to flash it after a restore.
We are legion, for we are many.
Sent from the DarkSide of the GalaXy with a MEK device
Thanks everyone... I actually found one specifically for cm10 under original development :thumbup:
Sent from my SPH-D710 using Tapatalk 2
1. Using twrp
2. Have nAndroid backup of stock ROM + others on drop box......
a. How to restore that back up, I have tried to restore using cwm recovery and it won't recognize it. When I pull backup off box it is a file with boot.IMG and etc in it. What do I do to use it
Sent from my One V using Xparent Blue Tapatalk 2
If you used TWRP recovery to make the backup, you need to use TWRP recovery to restore.
Yes I know it was origanly made by clock work mod I have flashed cwm and it still can't find the back up the upload from phony to drop box made the file different some how
Sent from my One V using Xparent Blue Tapatalk 2
If u used TWRP for backup then u have to use TWRP only for restoring lol....
Sent from my One V using xda app-developers app
I had problems with recovery once rooted... I had to look for different versions to flash SU, cause it couldnt find the files on my sdcard, I did flash that with cwm..
try looking for all the clockworkmods recovery, and try one at a time till u find the one that works...
I cant remember, but only 1 worked for me...
then I had the same problem with twrp, the only twrp that worked for me was 2311, that one was through goomanager to flash recovery....
hope that helps...
So, I flashed CM10 nightly 11/8. Dirty flash over a previous nightly, just cache and dalvik wipe. Now I can't boot to recovery, it just hangs at the cyan boot logo. Was using TWRP and I made sure to click the inject twrp box. Everything else works well and normally, aside from no recovery. I know the correct answer is to odin to stock and start fresh. However, does anybody know of a way to re-flash twrp or clockwork without access to recovery. I would like a quick temp fix for a few days if there is one. Thanks in advance!
Sent from my SPH-D700 using xda premium
U can just use odin to flash cwm. Look for the 5.x version thread for cwm and there's a .tar flashable file somewhere there. Just flash it in odin and you should be good. Since ur already rooted it should stick.
Sent from my SPH-D700 using xda app-developers app
I'm no Odin pro. Do I need the victory pit file too? Also what box do I put the cwm tar ball in? I appreciate the help.
Sent from my SPH-D700 using xda premium
propjockey said:
I'm no Odin pro. Do I need the victory pit file too? Also what box do I put the cwm tar ball in? I appreciate the help.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
No!!!!!!!!!!!!!!! Do not flash the tar file for cwm, that is bml only... there is no .tar for an mtd recovery for this phone... sorry, but if you lost recovery on mtd, sadly the only way to get it back is to odin to stock...
Word. Thanks for the save. I didn't think of the bml/mtd issue. I guess no short cuts this time. Thanks again guys.
Sent from my SPH-D700 using xda premium
Lol sorry I forgot about that.
Sent from my SPH-D700 using xda app-developers app
flastnoles11 said:
No!!!!!!!!!!!!!!! Do not flash the tar file for cwm, that is bml only... there is no .tar for an mtd recovery for this phone... sorry, but if you lost recovery on mtd, sadly the only way to get it back is to odin to stock...
Click to expand...
Click to collapse
Ya it doesn't work if you're on mtd, you'll get error on cwm and can't flash anything, even you flash twrp, you'll get error
One solution..
Odin to stock and odin cwm again
Sent from my SPH-D700 using xda premium
I think there IS (hopefully) a way of flashing MTD recovery without returning to stock. Maybe... grab a recovery.img from the ROM package, put it in SD card, and go to Terminal Emulator on phone. Then...
Command:
su
cd /sdcard
flash_image recovery recovery.img
This works on my good'ol (sold) G1 and Milestone... but don't know if this works on MTD. Anyway, give it a shot
Sent from Nokia N900 w/ Android 2.3.7
Well, I ended up Odining back to stock and starting over. After a crappy night of a bad cable and battery CPR, I got it working. I was using TWRP and I suspect that something went wrong in the re-injection process. All is well now. Thanks for everyone's help and suggestions
Sent from my SPH-D700 using xda premium
I am trying to go from cm10.1 to a 4.3 ge ROM and for some reason I can flash and get it to work buf once i reboot the phone i get stuck in a boot loop. Ive tried a few different 4.3 roms and always get the the same boot loop after rebooting.
Am i doing something wrong? (wipe/factory reset and format. Then flash rom)
Sent from my SGH-M919 using Tapatalk 4
Read around and found that it is twrp giving me problems. Is there a way to flash cwm via twrp?
Sent from my SGH-M919 using Tapatalk 4
PostMeridianLyf said:
Read around and found that it is twrp giving me problems. Is there a way to flash cwm via twrp?
Sent from my SGH-M919 using Tapatalk 4
Click to expand...
Click to collapse
Yeah. Just use a flashable CWM.zip rather than a Odin flashable .tar.
Also, it's TWRP 2.6 that is casuing problems. TWRP 2.5.2 works fine. You can find the download for that in the TWRP thread in the DEV section. You'll have to search the thread, but it's in there.
PostMeridianLyf said:
Read around and found that it is twrp giving me problems. Is there a way to flash cwm via twrp?
Sent from my SGH-M919 using Tapatalk 4
Click to expand...
Click to collapse
Yes, just get the zipped version of CWM, and it should be installable thru TWRP. Flash it the same as anything else.
I cannot find either the cwm zip or twrp 2.5.2
Sent from my SGH-M919 using Tapatalk 4
PostMeridianLyf said:
I cannot find either the cwm zip or twrp 2.5.2
Sent from my SGH-M919 using Tapatalk 4
Click to expand...
Click to collapse
The flashable CWM zip is buried in the CWM development thread, not in the OP. As far as TWRP 2.5.0.2, the Odin flashable tar and .img is here.