Develop Bugs

[Q] Help Stuck In Boot Screen Nandroid Doesn't Work

Well I was going to put my first ROM on (cyanogen) and something went wrong. I had done a Nandroid backup and when I try it says Error while flashing boot image. I can't get past the boot screen. In desperation I tried Wipe data/factory reset in Clockworkmod Recovery v2.5.0.1 to no avail. Can anyone help me outta this mess?

Anyone There ??
Can anyone help??

Make sure your battery is charged up enough, too low and nandroid will fail on most recovery versions but the latest amonra.
If that doesn't work look for a .img file to flash back to stock
Swyped from a galaxy far far away......

Where would I look for a .img file? On the SD?

If you can still wipe then you can get to recovery. Us the USB-MS toggle to connect your phone to your computer. Re-download a ROM's zip fie and try again. try something very stable, wipe, then reflash. It should boot fine. Sprintlovers is a good stable rom to work with. Just download, use USB-MS toggle to copy it to the root of your SD card, turn off USB-MS toggle, WIPE ALL! / factory data reset, then flash zip from SD card. Wait for that to finish and it will boot fine.
Here is a link to the sprint lovers download:
http://www.megaupload.com/?d=PXIYUNSY
and the thread:
http://forum.xda-developers.com/showthread.php?t=830153
If you are using clockwork recovery I think the USB toggle is under partition menu, that or advanced.

Thanks so much. I'll try that, but I'm not sure what you mean by the USB-MS toggle. Would you mind expanding on that a little? I really appreciate it.

I just searched for it. I have a different recovery so the wording is different. Connect your phone to the computer while in recovery. Move down to the Partition menu and enter that. One of the options should be "Mount USB". Click that.
A folder should pop up on your computer showing the contents of your SD card. Copy the .zip file that I gave you the link to above to the SD card. Then disconnect USB.
Wipe or factory reset from the wipe menu. Then flash the .zip from the SD card. Then reboot the phone. It will take a few minutes to load, but should work.

I can't thank you enough! I was scared sh-tless that I'd bricked my phone. Wish I could buy you a drink!!!

Glad to help!
If that works make a nandroid backup immediately so if it happens again you can restore the working sprint lovers.
If you want to try cyanogenmod again re-download (could have corrupted before), and always wipe before you flash the .zip or it will bootloop.
Have fun!

You know what I'd really like to do is restore the Nandroid that I did right before I got into this mess. But I keep getting the " Error while flashing boot image" message. I'm charging another battery to see if that's the cause of the error. What do you think?

I'm not sure. Could be a battery thing. I know it does give an error if the battery is too low, but i don't remember what the message is. I think it won't do anything if it is less than 30%.

chrismgan said:
You know what I'd really like to do is restore the Nandroid that I did right before I got into this mess. But I keep getting the " Error while flashing boot image" message. I'm charging another battery to see if that's the cause of the error. What do you think?
Click to expand...
Click to collapse
I got those errors a couple times when I first started out. I fixed it by flashing the rom I was running when I made the nandroid and then restored my nandroid over that.

Didn't I probably lose that ROM when I did the Factory reset?

chrismgan said:
Didn't I probably lose that ROM when I did the Factory reset?
Click to expand...
Click to collapse
No you don't lose your nandroid when you wipe back to factory. Your nandroid might be corrupt. It happens some times. I flash your custom ROM, set everything up the way you want it. Then do a nandroid backup. Copy that over to your PC to save space as it is a large file.

[Q] Why cant I restore my Nandroid Backup from CWM?

Hi all,
I have had my Note II for a day now and I love it but I seem to have an issue. I rooted and installed CWM 6.0.1.5 (modified version by Phil I believe) using Odin and I of course made a backup of my stock rooted ROM before I started flashing anything but when I tried to restore my Nand it says that it cant find the files and cant open the location. The CWM backup file IS there cause I can see it when I plug my phone into my computer but it wont restore and yes... I've tried EVERY restore option there is in CWM - Restore, Advanced Restore, Restore from External, Advanced Restore from External, so on and so on...
Can anyone tell my why I cant restore my Nandroid? This concerns me as well should I ever need to restore my backed up EFS as again, it just wont restore anything from CWM.
Anyone else with this issue or know what to do about it?
Also,
When I choose to flash anything from Internal SD it is now taking me to a list that shows /0, /obb and /legacy (or something like that) and then I have to choose /0 in order to gain access to my actual Internal files.
I actually have 2 of these sets of folders some how after flashing so now when I try and flash from Internal SD I have to choose /0 AND THEN ANOTHER /0 to access the internal card from CWM. This is quite weird and annoying to say the least. This behavior is also shown when searching my device using ANY file explorer and when I connect my phone to my computer as well - IE. I have all of these extra folders showing.
Can ANYONE explain why this is happening and how to avoid it if at all possible? Is this just something new in 4.2? I am currently running Jellybam 3.52 - 4.2.1 ROM.
Thanks,

Is your Nandroid backup from CWM or TWRP?
I've seen articles regarding the backup function of CWM, the backup files have to be in the following path on either the Internal or External SD Card. I'll use the below path as an example for an external SD card.
externalsdcard/clockworkmod/backup/[What ever you want the backup to be]
When you use the restore function from CWM and navigate to Restore from External/Internal SD Card. It should come up with the name of the folder you chose in [What ever you want the backup to be] and be able to restore your Nandroid backup.

Jonnit said:
Is your Nandroid backup from CWM or TWRP?
I've seen articles regarding the backup function of CWM, the backup files have to be in the following path on either the Internal or External SD Card. I'll use the below path as an example for an external SD card.
externalsdcard/clockworkmod/backup/[What ever you want the backup to be]
When you use the restore function from CWM and navigate to Restore from External/Internal SD Card. It should come up with the name of the folder you chose in [What ever you want the backup to be] and be able to restore your Nandroid backup.
Click to expand...
Click to collapse
My Nand is in CWM. I dont use TWRP.
As I said... My backup is on my internal sd card in the exact same format as you described but when I go to CWM and try to restore it first says "cannot open directory" and then immediately says "no files found"
Ive been using CWM since my original SGS and I have never seen this happen before. I can see it in my File Explorer, I can see it on my computer when I plug in the device but I cant get CWM to find the file to restore it.
Im about as confused as it gets...
Im testing something right now... I am making a new backup of my Jellybeer ROM to my External SD card to see what happens. IF it will find the files after its done I will advise but I still dont get why it wont restore from my internal card...?
*EDIT* So it seems to have backed up to the ext. sd card and I can see this file when I choose to restore from ext. sd but... it was the FASTEST backup Ive ever seen. It literally took like 45 seconds if that so I hope its a full back up!
IF my memory serves me correctly... When I backed up my stock ROM (my initial back up), I checked for the restore when it was done and it was there but then I flashed Hyperdroid and then I flashed PACman and then tried to restore my original Nand and it wouldn't let me so I wonder if I flash something else (which i don't want to do right now cause Jellybeer is serving me well at the moment) am I going to lose the ability to flash my Nand again?

Small bump...

yiannisthegreek said:
Small bump...
Click to expand...
Click to collapse
Ok so... NEW ISSUE!!!
I tried to restore the nand I made yesterday to my ext sd card (as I mentioned 2 posts back) and it said MD5 mismatch?! WTF?! How is that even possible? Can anyone please advise why my CWM is acting so weird?! Is there another version I can download perhaps? I am at a complete loss...

yiannisthegreek said:
Ok so... NEW ISSUE!!!
I tried to restore the nand I made yesterday to my ext sd card (as I mentioned 2 posts back) and it said MD5 mismatch?! WTF?! How is that even possible? Can anyone please advise why my CWM is acting so weird?! Is there another version I can download perhaps? I am at a complete loss...
Click to expand...
Click to collapse
Is there really no one who can help me with on this or give me some advice?

Md5 corrupted. ..
I.e your backup are corrupted.
Do factory reset then flash stock rom
Sent from my GT-N7100 using xda app-developers app

UtkarshGupta said:
Md5 corrupted. ..
I.e your backup are corrupted.
Do factory reset then flash stock rom
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply but... What would cause this to happen? Did you read my post where I backed up to my external sd card? Like I said... The backup literally only took like 45 seconds to complete which is weird unto itself.
What will flashing a stock ROM do to fix this? And when you say "stock" do you mean like "stock - unrooted"?

did u install cm 10. just read it propyl with cm 10.1 ie jb 4.2 creates a 0 folder all ur files get put in there
put anither rom on card delete the 0 folder then go to this link http://forum.xda-developers.com/showthread.php?t=1896696
every thing there you need to flash another rom or recovery
try chenglu recovery
dr ketan has done a very good usefull thread
hope it helps,,sounds like your backup is corrupt

sloppy1 said:
did u install cm 10. just read it propyl with cm 10.1 ie jb 4.2 creates a 0 folder all ur files get put in there
put anither rom on card delete the 0 folder then go to this link http://forum.xda-developers.com/showthread.php?t=1896696
every thing there you need to flash another rom or recovery
try chenglu recovery
dr ketan has done a very good usefull thread
hope it helps,,sounds like your backup is corrupt
Click to expand...
Click to collapse
Chenglu is the one I used when I rooted my device by using Dr. Ketans guide and now I cant get ANY of my NAND backups to restore...
With regard to the /0 file issue - Yes... I am running a 4.2.+ CM10.1 based ROM so I understand that it creates those /0 files but it just keeps on creating them after flashing anything new!!!

Your issue is related to the new JB 4.2 and multi-user feature. CWM cannot find backups since they are moved to a different folder
The day you need your backup, just install a JB 4.1.2, move your /0 folder to root of sdcard and run your nandroid

Phil3759 said:
Your issue is related to the new JB 4.2 and multi-user feature. CWM cannot find backups since they are moved to a different folder
The day you need your backup, just install a JB 4.1.2, move your /0 folder to root of sdcard and run your nandroid
Click to expand...
Click to collapse
Hi Phil,
Thanks for the reply my friend! So...you're saying that IF and when I need to restore my nand that I will have to install a 4.1.2 ROM first and then follow your instructions to move the /0 folder to the root of my sd card (i assume by using a file explorer of some kind in the 4.1.2 ROM itself?) and then flash my nand? Is that correct? Should I keep just any old 4.1.2 ROM on my device at all times for this purpose?
If so then what if I have multiple /0 files created as I do now? Currently I have 2 /0 folders and this seems to grow as I flash anything new. Do I then move ALL of the /0 folders to the root of my sd card before I can restore my nandroid backup?
Also... Why was I not able to restore from my external sd card using the option in your recovery either? I made a simple backup of my current 4.2.+ ROM to my external card and when I tried to restore it last night to test it said MD5 mismatch. Is this related to the 4.2 ROM issue as well?

yiannisthegreek said:
Chenglu is the one I used when I rooted my device by using Dr. Ketans guide and now I cant get ANY of my NAND backups to restore...
With regard to the /0 file issue - Yes... I am running a 4.2.+ CM10.1 based ROM so I understand that it creates those /0 files but it just keeps on creating them after flashing anything new!!!
Click to expand...
Click to collapse
delete 0 folder
flash cwm recovery with odin go into mounts
wipe caches and format system when done
power down then go into download mode
then flash stock img
that worked for me

sloppy1 said:
delete 0 folder
flash cwm recovery with odin go into mounts
wipe caches and format system when done
power down then go into download mode
then flash stock img
that worked for me
Click to expand...
Click to collapse
Im sorry but I dont know if I understand you completely...
Flash CWM with odin and then go into mounts? Firstly, what version of CWM are you saying to flash and then I assume you mean once thats done that I should then boot into recovery and then go into mounts? And then wipe caches, format system?
Can you clarify?

yiannisthegreek said:
Im sorry but I dont know if I understand you completely...
Flash CWM with odin and then go into mounts? Firstly, what version of CWM are you saying to flash and then I assume you mean once thats done that I should then boot into recovery and then go into mounts? And then wipe caches, format system?
Can you clarify?
Click to expand...
Click to collapse
re-dload chenglu recovery
when in recovery wipe data n dalvik then go into mounts then format system
then power down,
then download mode,
use odin to flash stock img
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
try this 1st
connect fone to pc,
open up 0 folder inside 0 fokder will be clockwork folder, drag it to root of sd card,
try restore it from there that might work

sloppy1 said:
re-dload chenglu recovery
when in recovery wipe data n dalvik then go into mounts then format system
then power down,
then download mode,
use odin to flash stock img
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
try this 1st
connect fone to pc,
open up 0 folder inside 0 fokder will be clockwork folder, drag it to root of sd card,
try restore it from there that might work
Click to expand...
Click to collapse
What I did was... I flashed v6.0.2.7 via ODIN (which has 4.2.+ ROM support) and I am now FINALLY able to restore my Nand back ups!!! The only thing now is that I apparently have 3 /0 folders on my device and I REALLY just want to know how to get rid of the extra folders and to know how to keep them from being created altogether!!!
I have one that has ALL of the original .zip files, gapps, etc that I installed on my device, then I have one that has an efs backup on it somehow and has a couple of application folders in it and then I have one that is like stock.
Why are these being created and how can I get rid of them? This is driving me CRAZY!!!

I had the same issue this morning.
I fixed it by installing the aroma file manager addon in Phil's CWM recovery and using aroma to copy the clockworkmod folder out of the /0 folder and back to the root of the sd card.
Then when I went into backup and restore the backup was visible again.
Once you have a rom installed you shoudl just be able to plug in via usb and just browse the sd card on your computer to move everything back out of the /0 folder

yiannisthegreek said:
Ok so... NEW ISSUE!!!
I tried to restore the nand I made yesterday to my ext sd card (as I mentioned 2 posts back) and it said MD5 mismatch?! WTF?! How is that even possible? Can anyone please advise why my CWM is acting so weird?! Is there another version I can download perhaps? I am at a complete loss...
Click to expand...
Click to collapse
You can install nandroid manager from playstore and you can fix nandroid md5 mismatch there or you can use terminal emulator to generate new md5 file in your nandroid (google it because i cant remember the command)

yiannisthegreek said:
Hi all,
I have had my Note II for a day now and I love it but I seem to have an issue. I rooted and installed CWM 6.0.1.5 (modified version by Phil I believe) using Odin and I of course made a backup of my stock rooted ROM before I started flashing anything but when I tried to restore my Nand it says that it cant find the files and cant open the location. The CWM backup file IS there cause I can see it when I plug my phone into my computer but it wont restore and yes... I've tried EVERY restore option there is in CWM - Restore, Advanced Restore, Restore from External, Advanced Restore from External, so on and so on...
Can anyone tell my why I cant restore my Nandroid? This concerns me as well should I ever need to restore my backed up EFS as again, it just wont restore anything from CWM.
Anyone else with this issue or know what to do about it?
Also,
When I choose to flash anything from Internal SD it is now taking me to a list that shows /0, /obb and /legacy (or something like that) and then I have to choose /0 in order to gain access to my actual Internal files.
I actually have 2 of these sets of folders some how after flashing so now when I try and flash from Internal SD I have to choose /0 AND THEN ANOTHER /0 to access the internal card from CWM. This is quite weird and annoying to say the least. This behavior is also shown when searching my device using ANY file explorer and when I connect my phone to my computer as well - IE. I have all of these extra folders showing.
Can ANYONE explain why this is happening and how to avoid it if at all possible? Is this just something new in 4.2? I am currently running Jellybam 3.52 - 4.2.1 ROM.
Thanks,
Click to expand...
Click to collapse
Is that cwm recovery on sdcard??? Please move it on your ext card and recover .
Or you got an md5 mismatch ? Use mismatch fixer or see my thread http://forum.xda-developers.com/showthread.php?t=2681072
Sent from my GT-S7562 using XDA Premium 4 mobile app

HELP! Verizon GNex stuck in Recovery

My phone is currently not working at all so I would really appreciate some help. I was running MMuzzy's 4.2 JB ROM (Around the 12/16/12 Version) and I decided to update to the 1/11/13 ROM version. So I installed the files onto my phone and rebooted into recovery, wiped cache and dalvik cache, and installed the files form SD Card. After this, I chose reboot system and it just went straight back into recovery. New ROM wouldn't load. I was an idiot and did not do a backup of my previous rom because I thought it would be a flawless process since I was updating to a new version of the same ROM. So I have no backup to access right now. An odd thing I noticed is when I "chose ZIP from SD card" multiple options such as 0/ and obb came up instead of just showing the files in my SD card. Right now to access my files I have to choose ZIP from sd card, choose 0/, 0/ again, 0/again, and then I can see my ROM and gapps zip files. Since the New rom didnt work I did a factory reset and wiped everything and tried to install the Zips again. Still nothing. Also, the phone can't find any of my old backups. I suspect this has something to do with the odd formatting issue and 0/ and obb folders showing up but I have no idea. What should I do? At this point I don't care If I lose everything on my sd card I just want my phone working.
Thanks

in mounts and storage mount /data then
adb push ROM.zip /data/media
then unmount and it should be there on the root of your "sdcard"
Edit- but if you have 3 "0" folders then you will have to change it from data/media to data/media/0/0/0

k786 said:
in mounts and storage mount /data then
adb push ROM.zip /data/media
then unmount and it should be there on the root of your "sdcard"
Edit- but if you have 3 "0" folders then you will have to change it from data/media to data/media/0/0/0
Click to expand...
Click to collapse
Not sure what this would do. Right now I am just stuck unable to run a rom. How do I install one and get it to boot?

schad89 said:
Not sure what this would do. Right now I am just stuck unable to run a rom. How do I install one and get it to boot?
Click to expand...
Click to collapse
Follow the instructions given in the last response

EddyOS said:
Follow the instructions given in the last response
Click to expand...
Click to collapse
Okay. Any way someone can give me a more detailed step by step on how to do these instructions? Sorry I'm pretty much a noob at this and I barely remember the ADP stuff I did on my mac when I first rooted my phone.
Thanks a lot

schad89 said:
Okay. Any way someone can give me a more detailed step by step on how to do these instructions? Sorry I'm pretty much a noob at this and I barely remember the ADP stuff I did on my mac when I first rooted my phone.
Thanks a lot
Click to expand...
Click to collapse
If you're a n00b then flashing a new ROM without knowing how to fix an issue wasn't the best idea was it?
The best solution I can give is to flash back to 100% stock and then start again once you know what you're doing. Use this guide:
http://forum.xda-developers.com/showthread.php?t=1626895

[Q] GNex stuck at bootup screen - how to recover files?

After a dead battery earlier today, my phone is stuck at the 'X' bootup screen. The phone is rooted and has a custom ROM on it that I did not do myself, someone else did it over a year ago.
I got into recovery mode and clockworkmod recovery v6.0.0.5. I tried wipe cache which did not fix the problem. I assume that I have to do the wipe data/factory reset option, is that right?
If so, how can I get my pictures and videos off the phone first? A fuller backup with SMS and so on would be nice as well.
I did a 'Nandroid' backup just now in CWM and it completed successfully, but I don't know where it went, it talked about an sd card but of course there is none. I would think whatever backup I made will be wiped away if I do the factory reset option.
When I plug in the USB in this recovery mode, my PC says it could not install the drivers correctly. I tried installing the drivers from samsung's website and it did not help.
Any help is greatly appreciated!

Ok, I have made a little progress I think. I got drivers and fastboot and adb files. I can now connect over fastboot in the bootloader and adb in clockworkmod. Now I am trying to figure out how to get my files.
Also I'm not clear on what is next. Can I just use the factory reset option in CWM and then everything will be fine?

Success! I used adb pull and got my entire sdcard directory which at least includes pics and vids.
Now what about SMS and MMS? And is there any chance of restoring all my apps and settings and everything? I assume that replicating everything would run the risk of just having another boot loop error! Not sure what to do or if I need to figure out how to flash a new ROM or what.

thor_ said:
I assume that replicating everything would increase the risk of just having another boot loop error!
Click to expand...
Click to collapse
Correct.
a maguro wrote this.

thor_ said:
Success! I used adb pull and got my entire sdcard directory which at least includes pics and vids.
Now what about SMS and MMS? And is there any chance of restoring all my apps and settings and everything? I assume that replicating everything would run the risk of just having another boot loop error! Not sure what to do or if I need to figure out how to flash a new ROM or what.
Click to expand...
Click to collapse
A factory reset erases everything on your phone EXCEPT nandroid backups and pics, music, etc on your sd card. You say you have no sd card but it is probably just not removable on your phone. Nandroid backups are saved on the sd card where they wont be erased. Texts, call history, etc are gone...just let them go, nbd. For future reference there are tons of apps that back up everything you want and you can set them to back up your stuff every day (titanium backup, eg).

sd0070 said:
A factory reset erases everything on your phone EXCEPT nandroid backups and pics, music, etc on your sd card. You say you have no sd card but it is probably just not removable on your phone. Nandroid backups are saved on the sd card where they wont be erased. Texts, call history, etc are gone...just let them go, nbd. For future reference there are tons of apps that back up everything you want and you can set them to back up your stuff every day (titanium backup, eg).
Click to expand...
Click to collapse
Thank you so much for the replies.
To confirm: I now have to adb push a rom file to my sdcard and then install from CWM.
What I have been trying to figure out is whether there is a stock ROM I can flash using this method? If not some other rom will be fine.

sd0070 said:
A factory reset erases everything on your phone EXCEPT nandroid backups and pics, music, etc on your sd card.
Click to expand...
Click to collapse
not true.
a factory reset in a custom recovery leaves these items, if you had stock recovery, it would wipe the device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:55 AM ----------
thor_ said:
Thank you so much for the replies.
To confirm: I now have to adb push a rom file to my sdcard and then install from CWM.
What I have been trying to figure out is whether there is a stock ROM I can flash using this method? If not some other rom will be fine.
Click to expand...
Click to collapse
if you want to flash the stock rom, use fastboot and the factory google images
you can adb push a custom rom over and flash it that way.

[Q] deleted os after bad rom flash. WIll pay for repair$$

HTC EVO 4g Sprint cant figure out how to get it back. please help will pay. dont even care about the money just need it fixed asap. thanks

What did you do? Can you still boot to recovery? If yes you can flash a rom.
Sent from my SPH-L900 using XDA Free mobile app

Help
jpisini said:
What did you do? Can you still boot to recovery? If yes you can flash a rom.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
I unlocked bootloader with windroid tool. Then I flashes twrp. Then this being my first time messing with an android in years I went and just grabbed the first rom I thought I could use, do to the fact that I had done no backup no nandroid anything so I flashed a rom and after it did it every time I tries to flash different rom because it said the rom I did first failed. So everytime I tries to do anything else with windroid it says there is a log file in the logs folder. Send this to windycity's forum so it can be tAken care of. But I couldn't find this file or where to submit the file so I thought if I just reset the phone back to factory I could restart. And after resetting it multiple times it still said, there is a log file in the logs folder send this to Windy City. So since I do still have the twrp tool that I can use I went in there and found that it has to rm -f delete everything Linux code so I did that. And since I've done that all I can do is get to bootloader and twrp. But the so is deleted. So basically nothing works. I can't figure out how to get the sd to mount or it won't mount for whAtever reason. And since the phone is wiped it won't enable USB debugging to connect to computer. I can get it to start to enable and connect for a second but not long enough for it to do anything. And I believe it's a htc evo 4g sprint. So that's the situation. The next thing I was gunn try was to go buy a mini sd card reader so I can mount it to computer and then put the rom in there. This **** is so confusing and ridiculous. I mean I can jailbreak an apple device no problem. But holy mother of God androids are the most insanely retarded phones to root. Drivers, adb, sdk...... Anyways if u can help let me know because there's a million roms and kernels out there and I don't know what build to use and how to set it up and the whole kernel process sounds confusing.

Do this. Go to the link below. Look at the second post. Go to the "Current Release" section and download either the stock rooted odex or deodex ROM, doesn't matter. Put the ROM zip on your external SD card. You can do this with the mount option in TWRP (select the mount option then select your external SD card from the menu. You should then be able to transfer the ROM zip from your computer directly to your phone), or just use a card reader to transfer the file from your computer to your SD card, then put the card back into your phone. Boot into TWRP and go to the wipe menu. Do a wipe of system, data, Dalvik & cache. Once you've done this, go to the install option, then locate the ROM zip you placed on your SD card. Flash the ROM. Once the install completes, reboot the phone. The first boot will take a few minutes so be patient. Afterwards the phone should boot to the OS.
http://forum.xda-developers.com/showthread.php?t=1671395
Also, USB debugging is only useful when the phone is actually booted to the OS. It doesn't matter that it isn't enabled for your particular dilemma. If all else fails, shoot me a PM and I may have something else that can get you up and running.

Magnum_Enforcer said:
Do this. Go to the link below. Look at the second post. Go to the "Current Release" section and download either the stock rooted odex or deodex ROM, doesn't matter. Put the ROM zip on your external SD card. You can do this with the mount option in TWRP (select the mount option then select your external SD card from the menu. You should then be able to transfer the ROM zip from your computer directly to your phone), or just use a card reader to transfer the file from your computer to your SD card, then put the card back into your phone. Boot into TWRP and go to the wipe menu. Do a wipe of system, data, Dalvik & cache. Once you've done this, go to the install option, then locate the ROM zip you placed on your SD card. Flash the ROM. Once the install completes, reboot the phone. The first boot will take a few minutes so be patient. Afterwards the phone should boot to the OS.
http://forum.xda-developers.com/showthread.php?t=1671395
Also, USB debugging is only useful when the phone is actually booted to the OS. It doesn't matter that it isn't enabled for your particular dilemma. If all else fails, shoot me a PM and I may have something else that can get you up and running.
Click to expand...
Click to collapse
Can you still boot into recovery