Jelly Bean VZW gone wrong. Help plz - Samsung Galaxy Nexus

Hi guys,
I used techfanatic9's DIY for going to Jellybean on my VZW galaxy nexus and it worked but I had no mobile network.
After a few attempts they referred me to their going back to stock which used ODIN.
Anyway, reflashing back to stock failed in Odin and after I took the battery out and out it back in (with the cable connected) i could no longer get to download mode or recovery (I was using clockwork mod recovery).
Now everytime I turn the phone on it has a phone a yellow exclamation point and a monitor and I can't get to recovery or download mode.
Can anyone help me at least get to recovery mode again? Odin still recognizes my phone (drivers good) but it always fails to flash back to stock. I just got this phone not too long ago and I'm kind of devastated =(

corning84 said:
Hi guys,
I used techfanatic9's DIY for going to Jellybean on my VZW galaxy nexus and it worked but I had no mobile network.
After a few attempts they referred me to their going back to stock which used ODIN.
Anyway, reflashing back to stock failed in Odin and after I took the battery out and out it back in (with the cable connected) i could no longer get to download mode or recovery (I was using clockwork mod recovery).
Now everytime I turn the phone on it has a phone a yellow exclamation point and a monitor and I can't get to recovery or download mode.
Can anyone help me at least get to recovery mode again? Odin still recognizes my phone (drivers good) but it always fails to flash back to stock. I just got this phone not too long ago and I'm kind of devastated =(
Click to expand...
Click to collapse
Follow up.. Did a lot of self educating over 3 days.
I lost recovery. I made a jig using some resistors from radio shack and cutting up an unused usb cable.
Got download mode back and used Odin (which is a very bad tool from my research but also can be good) + a 4.0.2 image and a phone file and restored my soft brick back to stock.

Related

[Q]Restoring stock in "android stock recovery"?

so I have my t-mobile galaxy sII and was very happy with the phone had it rotted and everything was great when one day the USB Port stopped being recognized by my computer and every time I would plug it in the phone would think it was being charged and no USB icon would come up. thinking that this was a software issue, and after different process, I resulted in testing to unroot my phone in order to try and resolve the problem. it didn't and now I can't re-root because of the USB problem but it was stock so I figured send to samsung for repair. problem is even though the phone is unrooted now there is still the "bullet kernel" loading splash screen when the phone starts up and not the stock one. so I cant send it into samsung and since I don't have clockwork recovery mod and cant re-root because of usb problems. I'm stuck. but I know androids stock recovery menu allows one to "apply update from sd card" so is there a way I can apply an update that will restore the original splash screen and restore everything back to stock so I can send it to samsung finally? I'd really appreciate any help and if anyone has file that can help that would be awesome thanks in advanced!
http://forum.xda-developers.com/showthread.php?t=1374868 this should help, can you Odin the stock recovery? Link is at the bottom
Sent from my SGH-T989 using Tapatalk
Unless someone has stock recovery in a zip form then the only other way to get stock recovery back is with flashing with Odin and a working usb.
Edit: put the zedomax rom on a sd card and flash that, it has stock kernel and recovery. It is deodexed but noone at a store would be able to tell its deodexed.
I am not rooted, I can get into the stock "android recovery menu" using the 3 butto combo. not walking about clockwork. and thats it everything else is stock, the rom the kernel. the only thing is the splash sreen at the start up is still from an old rom and I can't send it in like that. I cant use odin because my comp wont recognize my usb. anyhing I can do in the android stock recovery menu? can I do anything with apply update from sd? thank you
have you tried a factory reset from recovery menu or settings, storage, reset USB storage. ?
Sent from my SGH-T989 using XDA App
tried all of it, resets everything right with the phone but the bullet kernel flash screen still is there on a reboot. at this point I am hoping i can get the usb to work long enough that my pc recognizes my phone for a quick odin flash...
how did you fix it?
I too have a stock unrooted gt-i9300, which won't enter download mode, and which ODIN won't recognize due to driver issues.
Is there any way to use recovery mode (which seems to work just fine) to fix the download mode problem? (I would be thrilled if I could figure out how to get it back to factory conditions. I've even tried factory reset, and still I can't get download mode to come up). All I get is the android with the red triangle.
arbely, were you able to restore your system?

[Q] did I brick my wifes phone?

Just got this phone for my wife and decided to root it for her. I have the note ii and had no problem with mine using the same method. I used the Samsung galaxy 3 toolkit v2.3.0. Chose option 2 for sprint and then option 2 rooting options. Then # 3 all in one. I already had the drivers on the pc and the phone was set for usb debugging. THe software flashed the phone but when it came back up I get the "samsung" boot screen then the sound of it booting up. The only problem it is a black screen with a blue led light. Thats it, tried to reboot into recovery and download mode but there is nothing there. just reboots to black screen. Now I do have one of those jtag usb ends I have order just in case I needed it and I can boot it into download mode and I can use odin but I have no idea what I need to do to "fix" it. Tried to use the recovery option in the toolbox but that didnt work. Also tried team epic's root tar file but that didnt work either and I am out of ideas. The only thing I know is my wife is going to kill me if I can't get this fixed.
Please help!
ps...since this phone is one day old if i cant fix it I would like to take it back to sprint for another one but I need some way to reset the counter using the download method only or I am hosed.
Q
quantum3 said:
Just got this phone for my wife and decided to root it for her. I have the note ii and had no problem with mine using the same method. I used the Samsung galaxy 3 toolkit v2.3.0. Chose option 2 for sprint and then option 2 rooting options. Then # 3 all in one. I already had the drivers on the pc and the phone was set for usb debugging. THe software flashed the phone but when it came back up I get the "samsung" boot screen then the sound of it booting up. The only problem it is a black screen with a blue led light. Thats it, tried to reboot into recovery and download mode but there is nothing there. just reboots to black screen. Now I do have one of those jtag usb ends I have order just in case I needed it and I can boot it into download mode and I can use odin but I have no idea what I need to do to "fix" it. Tried to use the recovery option in the toolbox but that didnt work. Also tried team epic's root tar file but that didnt work either and I am out of ideas. The only thing I know is my wife is going to kill me if I can't get this fixed.
Please help!
ps...since this phone is one day old if i cant fix it I would like to take it back to sprint for another one but I need some way to reset the counter using the download method only or I am hosed.
Q
Click to expand...
Click to collapse
I dont have my Galaxy S3 yet, but it sounds like all you would need is to flash a stock rom through odin. Look in the android development sub-forum and find a stock odinable rom.
I'm with the above poster. Try an odin repair.
And let this be a lesson to you. Don't mess with the wifey's toys, Murphy's law will bite you every time and she'll remember "forever" and dredge it up when you least expect it.
I hate Murphy's law...but you are so right.
I went to this thread:
http://forum.xda-developers.com/showthread.php?t=1774722
and downloaded SPR Image (JB 4.1.1) and it installed bootloader, system etc (the works) and when I rebooted it worked. I still don't have CWM and I dont even know if i have root BUT it works and I am now out of the doghouse! Thanks for all the help and if you think of anything else I need to know please tell me and thanks again...
PS.. installed goomanager and was able to get TWRP so the phone is rooted. next is the rom toolbox so I can back everything up!

[Q] Phone possibly bricked, need help

SO using odin on my Samsung Galaxy s2x T989D it failed, and my phone could not do anything but bring me to the download mode screen and told me i had to put it in recovery mode and use kies. but i couldint go into recovery mode. afer using google i found a possible solution. I used odin to try and stock again. and that worked..kinda...now when i try and turn on my phone its a Tmobile loading screen, it used to be koodo, my phone wont go past this screen and still cant go into recovery mode. when i go into download mode it still says odin mode.
mjogden said:
SO using odin on my Samsung Galaxy s2x T989D it failed, and my phone could not do anything but bring me to the download mode screen and told me i had to put it in recovery mode and use kies. but i couldint go into recovery mode. afer using google i found a possible solution. I used odin to try and stock again. and that worked..kinda...now when i try and turn on my phone its a Tmobile loading screen, it used to be koodo, my phone wont go past this screen and still cant go into recovery mode. when i go into download mode it still says odin mode.
Click to expand...
Click to collapse
Sounds like a bad flash but if you have download mode, you should be in luck. Using Odin flash the Koodo 4.1.2 stock rom (https://www.dropbox.com/s/jcyk25je4u6j4vt/T989DTLUMC4_T989DOYBMC4_KDO.zip) & you should be in the clear. This would restore the stock recovery & be just as it was the day you got it (Well, day it was upgraded to Jelly bean)
Let me know if I misunderstood something, but this hopefully will help you out.

SGH-I747 AT&T Softbricked Maybe Hard

Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.
Go into download and let us know what is shown on the screen.
audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!
OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app
gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?

[Q] help - i think my phone is temporary bricked

hi,
so i just got my s6 edge for sprint shipped to me (it wasn't activated to any service when i got it). here is the order of events i took:
1) tried to activate my service, but there was a delay in porting the #
2) while waiting for them to port it, i rooted it, installed twrp and a rom (this was when it was on 5.0.2)
3) they called and said they were ready to port, but the new rom didn't have the activation software in it. so i stalled them and said i would call back. i then reverted back to stock using odin.
4) got the number ported and was fine using the phone at that point.
5) this is where the day turned bad...... i didn't realize that coincidentally today, a new firmware was released to 5.1.1 and the phone auto-updated to it while i wasn't looking
6) i went to go re-root it using the same 5.02 root and now my phone is stuck. it's sitting on the "Samsung Galaxy S6 Edge, Powered by Android" screen and in the top left in red it says "RECOVERY IS NOT SEANDROID ENFORCING"
7) i tried to restore it back to the stock using odin, but it errored in the download mode (i don't remember the error off hand)
i can get into download mode, and that's about it. i had to let the phone's battery die on it's own to turn it off (this phone gets super hot, btw)
so i guess what i need to know is how to restore back to factory default again, now that it thinks it's on 5.1.1. is there any hope?
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
bbacon said:
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
Click to expand...
Click to collapse
check this post, download the tar and flash it in odin. it worked for my phone!
http://forum.xda-developers.com/showpost.php?p=61650724&postcount=142
it got me into a recovery image that worked and i was able to factory reset in there. my phone is booting properly now. (after it reboots when done, it took a bit on the first title screen to do anything, just be patient)
Thanks man, that worked great. Although I found out in the process of trying to fix it the past few days, I must have flashed a non-compatible kernel because once it boots the touch screen is unresponsive. I guess I'll have to wait until the firmware download is available after all. Thanks again for the help though

Categories

Resources