Related
I got a white (not sure if thats relevant) GSM Nexus that Ive been using on Orange and I cant get it to find the OTA update to 4.0.2. I know it should be on that as my original GN updated to it as soon as I started it up but this one hasnt and cant seem to find any updates when you tell it to check?
I dont really want to look at messing with the fw until I've had chance to run it in.. any ideas what Im doing wrong?
Could it be anything to do with my Carrier? If I were to try a different providers sim would it make any difference?
mozza54 said:
I got a white (not sure if thats relevant) GSM Nexus that Ive been using on Orange and I cant get it to find the OTA update to 4.0.2. I know it should be on that as my original GN updated to it as soon as I started it up but this one hasnt and cant seem to find any updates when you tell it to check?
I dont really want to look at messing with the fw until I've had chance to run it in.. any ideas what Im doing wrong?
Could it be anything to do with my Carrier? If I were to try a different providers sim would it make any difference?
Click to expand...
Click to collapse
Are you on Yakju build?
yes, checked that already. The phones also totally unbranded and sim free etc
Manually flash the 4.0.4 system image without the -w switch
Sent from my Galaxy Nexus using xda premium
EddyOS said:
Manually flash the 4.0.4 system image without the -w switch
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
How do I do that? Would doing a manual flash mean rooting the device?
you can go to 4.0.4 from 4.0.1, instructions: http://andwise.net/?p=283
do not forget to backup: http://andwise.net/?p=299
andwise said:
you can go to 4.0.4 from 4.0.1, instructions: http://andwise.net/?p=283
do not forget to backup: http://andwise.net/?p=299
Click to expand...
Click to collapse
Upgrading manuallys not the issue, the problem I seem to have is that my OTA updates arent there
I really dont want to mess with the phone if this is a fault as then returning it wouldnt be possible
Since the new takju gsm galaxy nexus came out today, google released the factory images for it. If you flash these takju images onto a yakju phone, will it convert the phone to a takju?
shahravi94 said:
Since the new takju gsm galaxy nexus came out today, google released the factory images for it. If you flash these takju images onto a yakju phone, will it convert the phone to a takju?
Click to expand...
Click to collapse
Yes....
Let's see who does it by tonight =]
- Google Galaxy Nexus
thanks guys!
according to this http://www.androidcentral.com/new-android-404-factory-images-available-online and krohnjw it should work!
iGoogleNexus said:
Let's see who does it by tonight =]
- Google Galaxy Nexus
Click to expand...
Click to collapse
I did just now and it works great! no problems
Of course it works great. There's probably no benefit to it, considering that you can just get Wallet from the Play Store now.
martonikaj said:
Of course it works great. There's probably no benefit to it, considering that you can just get Wallet from the Play Store now.
Click to expand...
Click to collapse
I can already get that on a yakju build.
shahravi94 said:
Since the new takju gsm galaxy nexus came out today, google released the factory images for it. If you flash these takju images onto a yakju phone, will it convert the phone to a takju?
Click to expand...
Click to collapse
Just to clarify: there are no yakju devices or takju devices or yakjuxw devices, etc. There are maguro devices and there are toro devices. yakju/takju/yakjuux/etc are made to run on maguro devices, so they are interchangeable. mysid is made to run on toro.
iGoogleNexus said:
Let's see who does it by tonight =]
- Google Galaxy Nexus
Click to expand...
Click to collapse
I did it this morning, no issues (unsurprisingly, it's the same hardware).
krohnjw said:
I did it this morning, no issues (unsurprisingly, it's the same hardware).
Click to expand...
Click to collapse
What would be the benefits of flashing Takju?. Does it get faster data speeds?.
Sent from my Galaxy Nexus using xda premium
Levi strauss said:
What would be the benefits of flashing Takju?. Does it get faster data speeds?.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
It is literally 99.99% the same (radio, everything). It just has Google Wallet preloaded. But like I said it doesn't really matter considering you can download it from the Play Store uninhibited now.
martonikaj said:
Of course it works great. There's probably no benefit to it, considering that you can just get Wallet from the Play Store now.
Click to expand...
Click to collapse
Not in canada
Sent from my Galaxy Nexus using Tapatalk
bendirkss said:
Not in canada
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
You can't use Google Wallet in Canada anymore anyway (I mean you can no longer reload the prepaid card)...
only reason i want to do it is because my dad is the one that uses the galaxy nexus. He has been having random reboot issues on it with aokp and cna so i was just gonna flash him back to a stock image. I was planning on flashing the standard yakju but i figured since takju is the USA version and we are in the USA i might as well give him takju.
shahravi94 said:
only reason i want to do it is because my dad is the one that uses the galaxy nexus. He has been having random reboot issues on it with aokp and cna so i was just gonna flash him back to a stock image. I was planning on flashing the standard yakju but i figured since takju is the USA version and we are in the USA i might as well give him takju.
Click to expand...
Click to collapse
I wouldn't say its any more "USA Version" than yakju is. They're nearly the exact same.
But go ahead, nothing bad is going to happen. Flash it just the same as you would yakju builds.
sorry, lots of questions
Ok, complete build/flash/rom newbie here...
I'm in USA/T-mobile on a stock GNex, yakju build, 4.0.2... been waiting patiently for the OTA as again, complete newbie to all this stuff, figured I'd wait for the OTA rather than trying all this fancy shmancy stuff.
But let's say I were to flash a 4.0.4 build; do I still get future OTA's? Or do I have to continue to manually install all future updates?
Going from 4.0.2 to 4.0.4... I know there was a minor update for antennae issues a few days ago/last week... do I need to increment or can I jump straight into the latest? Also, does it matter from 4.0.2 to the yakju or takju 4.0.4?
Basically if I decide to try this, most likely this weekend, I want to make sure I'm 100% completely up to date.
Last question, how long approx. does it take to do all this for a complete newb?
pwiiiiiiiiiich said:
Ok, complete build/flash/rom newbie here...
I'm in USA/T-mobile on a stock GNex, yakju build, 4.0.2... been waiting patiently for the OTA as again, complete newbie to all this stuff, figured I'd wait for the OTA rather than trying all this fancy shmancy stuff.
But let's say I were to flash a 4.0.4 build; do I still get future OTA's? Or do I have to continue to manually install all future updates?
Going from 4.0.2 to 4.0.4... I know there was a minor update for antennae issues a few days ago/last week... do I need to increment or can I jump straight into the latest? Also, does it matter from 4.0.2 to the yakju or takju 4.0.4?
Basically if I decide to try this, most likely this weekend, I want to make sure I'm 100% completely up to date.
Last question, how long approx. does it take to do all this for a complete newb?
Click to expand...
Click to collapse
If you flash the stock images from google you will get updates. It isn't very hard but it does require you have the sdk and fastboot set up. keep in mind that flashing those images will wipe out your entire phone.
shahravi94 said:
If you flash the stock images from google you will get updates. It isn't very hard but it does require you have the sdk and fastboot set up. keep in mind that flashing those images will wipe out your entire phone.
Click to expand...
Click to collapse
It doesn't require the SDK. Just Fastboot and ADB.
He doesn't have to wipe his phone if he just applies the updates only, not flashing the complete images (he's already on yakju).
well yeah. i just figured that in order to have fastboot he would need the sdk set up or atleast partially set up.
and oh i thought google wasn't providing update images anymore. just the full system images. i may be wrong however.
shahravi94 said:
well yeah. i just figured that in order to have fastboot he would need the sdk set up or atleast partially set up.
Click to expand...
Click to collapse
You can download just Fastboot and ADB.
and oh i thought google wasn't providing update images anymore. just the full system images. i may be wrong however.
Click to expand...
Click to collapse
No you can get just updates here on XDA.
Hey guys, it seems like the GPS on my device is broken.
It just won't fix, and on apps like GPS-Test there are no sattelites visible. I tried everything from Removing and Updating AGPS-Data, Turn AGPS off, Update Radios, Return to Stock 4.0.4 but it won't work, so I guess it's broken.
As I already mentioned I installed stock 4.0.4 but got one problem:
My Nexus was a YAKJUXW-Model but currently I'm using the YAKJU Version (4.0.4, IMM76I).
Do I need to return to YAKJUXW if I want to make use of the warranty (Does anyone have expierience with this)?
If so, where can I find a download of the YAKJUXW-Firmware? I remember doing a Nandroid before switching from stock to a Custom-ROM, but I deleted this Backup ages ago.
https://developers.google.com/android/nexus/images
zuberio said:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
I'm currently running the version I downloaded from there. But where do I find a YAKJUXW-Image?
Or should I really try to give them my device which is running the Stock YAKJU-Image?
brunnen153 said:
I'm currently running the version I downloaded from there. But where do I find a YAKJUXW-Image?
Or should I really try to give them my device which is running the Stock YAKJU-Image?
Click to expand...
Click to collapse
If you want the yakjuxw images, there is a thread in the dev section (started by josteink) that has a link.
Not sure if it matters if you return it with yakju or yakjuxw.
Sent from my Galaxy Nexus using Tapatalk 2
Okay, thank you for the answer.
Tomorrow if I have enough time, I'll go to the shop and give them my Nexus.
brunnen153 said:
Okay, thank you for the answer.
Tomorrow if I have enough time, I'll go to the shop and give them my Nexus.
Click to expand...
Click to collapse
Here is the link by the way for the yakjuxw images.
Just a little Update:
I got my phone back today, and they said they replaced the W-LAN and GPS Module. GPS is working again
They also said they did an Update and Factory Reset, however it's still on ITL41F YAKJUXW.
Thank you for helping me!
Btw: They forgot to relock the device ;D
Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:
andieknoxville said:
Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:
Click to expand...
Click to collapse
I'm not 100% sure but I think your kernel maybe be the Developer preview kernel, the official is 3.0.31-g6fb96c9, you could try flashing that? It's what I'm running with 4.1.1 and it works fine.
andieknoxville said:
Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:
Click to expand...
Click to collapse
Can you still txt/call while the signal is dropped??
Sgtpanda said:
I'm not 100% sure but I think your kernel maybe be the Developer preview kernel, the official is 3.0.31-g6fb96c9, you could try flashing that? It's what I'm running with 4.1.1 and it works fine.
Click to expand...
Click to collapse
The 4.1.1 is available from OTA, but when i press to install the phone reboot then enter in CWM and shows a message that de update was found, try install but give me a erro message that failed, i'm a new user on android, my phone was an iPhone.
Thanks for help
kyokeun1234 said:
Can you still txt/call while the signal is dropped??
Click to expand...
Click to collapse
No, when de signal is dropped i had to take battery out from phone, wait 5 or more minutes than put it back! If i put it back before i have the baseband unknown message on Config > About Phone. And this happens only if i have 3G signal, i see many people saying about signal issues after OTA to 4.0.4 and if i still with "only 2g" selected i don't have signal drop or disable the data, then i don't have any problem
Thanks for help
andieknoxville said:
The 4.1.1 is available from OTA, but when i press to install the phone reboot then enter in CWM and shows a message that de update was found, try install but give me a erro message that failed, i'm a new user on android, my phone was an iPhone.
Thanks for help
Click to expand...
Click to collapse
If it's the status 7 error it's because OTA's require stock everything I think, including recovery.
Sgtpanda said:
If it's the status 7 error it's because OTA's require stock everything I think, including recovery.
Click to expand...
Click to collapse
How i do that? A update can resolve this problems?
Thanks
andieknoxville said:
How i do that? A update can resolve this problems?
Thanks
Click to expand...
Click to collapse
Not sure if it will fix the problem, I think it's in the kernel you have as that's where WIFI is managed, however you could try and if that doesn't work change the kernel.
Instructions on how to update to official 4.1 are here however if you want to then accept the OTA afterwards when following Method 1 do not delete/rename /system/etc/install-recovery.sh and CWM will be overwritten by stock and you should be able to accept OTA's.
Note: If you don't want to lose your data then you could try skipping the "Wipe data/factory reset" step but do that at your own risk, I skipped it and it works fine though.
Sgtpanda said:
Not sure if it will fix the problem, I think it's in the kernel you have as that's where WIFI is managed, however you could try and if that doesn't work change the kernel.
Instructions on how to update to official 4.1 are here however if you want to then accept the OTA afterwards when following Method 1 do not delete/rename /system/etc/install-recovery.sh and CWM will be overwritten by stock and you should be able to accept OTA's.
Note: If you don't want to lose your data then you could try skipping the "Wipe data/factory reset" step but do that at your own risk, I skipped it and it works fine though.
Click to expand...
Click to collapse
i will try OTA's, if dosen't fix what do you think about FuguMod kernel ?
Thanks for help
someone? a little information, when i have this problem the option to turn off the data disappear, than i have to take out battery wait five or more to get signal again
is problem hardware pba (modem)
http://forum.xda-developers.com/showthread.php?t=1626593&page=5
a "different" kinda phone problem(?)
I looked through most all of these forums and couldnt find anyone with the problem im having. Not sure if it's me or what...
My problem is that when I flash some roms, my phone doesnt work. (yes im on sprint and only using toroplus). Well, yesterday, for most of the day, everything on my phone worked. When I got up this morning, It hadnt charged, and I lost my dialing again. Some ROMs I flash start off. When I go to settings> about phone> status under "Network" it says "unknown" and under "service state" It will say "no service" then checking on "Moblle Network State" It'll say "unknown"", sometimes my phone number shows up, sometimes it doesnt, Most times I cant make outgoing calls and when anyone calls me, it does a half ring and directs my callers straight to my voice mail. Is anyone having this problem too? And if so, how did you fix it? It frustrates the hell outta me and I think I should just go back to ICS although I dont want to. HELLP!!! :-/
Thanks,
Ridge
P.S. I forgot to mention that Im on a Sprint phone and that Im running Houng81's AOKP Aug1 version Baseband: fg01, the kernel that came with the ROM, Ive even replaced them a few times and nothing does any better. Forgot to add this to my prior text LOL sorry, that just gave me away as a n00b huh? HEHE
Ridge
andieknoxville said:
i will try OTA's, if dosen't fix what do you think about FuguMod kernel ?
Thanks for help
Click to expand...
Click to collapse
It's a great kernel.
andieknoxville said:
someone? a little information, when i have this problem the option to turn off the data disappear, than i have to take out battery wait five or more to get signal again
Click to expand...
Click to collapse
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201
bk201doesntexist said:
It's a great kernel.
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201
Click to expand...
Click to collapse
I read in another forum that the "factory" folder is the efs on the Gnex, and maybe my phone was with this folder corrupt, if i get a backup of another Gnex thats everything is working and restore to my Gnex will be resolve the problem?
TheRidge69 said:
I looked through most all of these forums and couldnt find anyone with the problem im having. Not sure if it's me or what...
My problem is that when I flash some roms, my phone doesnt work. (yes im on sprint and only using toroplus). Well, yesterday, for most of the day, everything on my phone worked. When I got up this morning, It hadnt charged, and I lost my dialing again. Some ROMs I flash start off. When I go to settings> about phone> status under "Network" it says "unknown" and under "service state" It will say "no service" then checking on "Moblle Network State" It'll say "unknown"", sometimes my phone number shows up, sometimes it doesnt, Most times I cant make outgoing calls and when anyone calls me, it does a half ring and directs my callers straight to my voice mail. Is anyone having this problem too? And if so, how did you fix it? It frustrates the hell outta me and I think I should just go back to ICS although I dont want to. HELLP!!! :-/
Thanks,
Ridge
Click to expand...
Click to collapse
Well i'm from brazil, and i have a question, sprint is CDMA? If the answer it's YES, do you flash a CDMA rom? if you flash a GSM rom it doesn't work
bk201doesntexist said:
It's a great kernel.
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201
Click to expand...
Click to collapse
Thanks for this post. I bought my mom a sprint gnex for mothers day, and sprint is pushing a 26mb ota. I put TWRP on her phone and rooted. Do I need the stock recovery to do the update, does the update break root?
Sorry, not familiar with Sammy or nexus devices, I've always used HTC. And the nexus forums are kinda hard to navigate because of the way it's split up.
Much thanks to anyone.
Sent from my EVO using xda premium
---------- Post added at 12:26 AM ---------- Previous post was at 12:25 AM ----------
andieknoxville said:
Well i'm from brazil, and i have a question, sprint is CDMA? If the answer it's YES, do you flash a CDMA rom? if you flash a GSM rom it doesn't work
Click to expand...
Click to collapse
Do not flash a GSM ROM on a CDMA device/radio.
Sent from my EVO using xda premium
I had update manually to 4.1.1 factory image, the bootloader has been updated, and the problem still here, maybe this is an efs folder corrupted?
If i get a backup from a gnex that all is working and restore will be fix ?
Thanks
???
I've searched for an answer for this on google and on here, but can't find one anywhere. apologies if I'm being dim.
I've just bought an unlocked Galaxy nexus of ebay (I9250) and I've put my o2 uk sim into it. I only bought it so I could get my hands on jellybean.
Is it actually available for this handset in the uk ota or otherwise (without rooting)
thanks
currently running 4.0.4
depends on the firmware you are on.
what does the build number say in the about phone section under settings?
Imm76k.i9250xwld2
tomthefear said:
Imm76k.i9250xwld2
Click to expand...
Click to collapse
yakjuxw is the version you have and i'm pretty sure JB is not out for that version.
the best way to get jellybean on your device is to convert to stock yakju. here is a great guide to converting to yakju: http://forum.xda-developers.com/showthread.php?t=1626895
Zepius said:
yakjuxw is the version you have and i'm pretty sure JB is not out for that version.
the best way to get jellybean on your device is to convert to stock yakju. here is a great guide to converting to yakju: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Thanks for the fast reply. I got a nexus because I wanted jellybean without any hassle. This method looks pretty intense.
Was there a way to tell if my device would have an update available before I bought it?
what's the difference between yakjuxw & yakju? is it a regional thing?
if i do convert to yakju, will it be like my handset was always yakju (if you get me?)
EDIT: I think i meant is yakju an official google rom
tomthefear said:
Thanks for the fast reply. I got a nexus because I wanted jellybean without any hassle. This method looks pretty intense.
Was there a way to tell if my device would have an update available before I bought it?
what's the difference between yakjuxw & yakju? is it a regional thing?
if i do convert to yakju, will it be like my handset was always yakju (if you get me?)
Click to expand...
Click to collapse
its a very simple process. if you follow the steps as they are and do not skip anything, you will be fine and if you happen to run into any problems, me or efrant can help you if you post in the thread
the difference is regional and yakju is updated directly from google. anything other than yakju, takju (US play store version) and mysid (verizon variant) is updated by samsung
if you convert to yakju, you will notice no difference. the GSM version's hardware is the same across all variants.
So if i do this process, will it just be like I have a "pure" nexus, and i will receive any future ota updates?
also, do i need to root or anything?
I'm stressing a bit because that is what I thought I was getting
tomthefear said:
So if i do this process, will it just be like I have a "pure" nexus, and i will receive any future ota updates?
also, do i need to root or anything?
I'm stressing a bit because that is what I thought I was getting
Click to expand...
Click to collapse
you will have a pure nexus and will updates as soon as they are available directly from google
the only thing you will be doing is unlocking the bootloader. this is not the same as rooting, and you can always relock the bootloader for a pure stock look, although having it unlocked does nothing really.
just follow the steps and you will be fine.
sorry for bombarding you with questions.
Does it make a difference if I go for the 4.0.4 (IMM76I) 4.1.1 (JRO03C)?
I'm assuming I'd just want to go straight to 4.1.1
tomthefear said:
sorry for bombarding you with questions.
Does it make a difference if I go for the 4.0.4 (IMM76I) 4.1.1 (JRO03C)?
I'm assuming I'd just want to go straight to 4.1.1
Click to expand...
Click to collapse
download the yakju 4.1.1 from google (there's a link in the guide) and flash directly to jelly bean.
I'm on mac and there isnt a version of 7zip available. It seems to have unzipped fine with the native osx unarchiver. is that ok?
Ive got the 6 img files.
tomthefear said:
I'm on mac and there isnt a version of 7zip available. It seems to have unzipped fine with the native osx unarchiver. is that ok?
Ive got the 6 img files.
Click to expand...
Click to collapse
yes there should be 6.
for all the fastboot commands, you will enter them in terminal and instead of just fastboot, you'll need to start the commands with ./
so it'd be like: ./fastboot flash system system.img
tomthefear said:
I'm on mac and there isnt a version of 7zip available. It seems to have unzipped fine with the native osx unarchiver. is that ok?
Ive got the 6 img files.
Click to expand...
Click to collapse
Try 7zX for osx.
Sent from my Galaxy Nexus using Tapatalk 2
Done!! All seems to have worked correctly.
Thanks so much for your help.
is there any way to check that every step worked correctly?
if i want to return the phone (to claim on the warranty etc) would i just have to lock the boot loader?
tomthefear said:
Done!! All seems to have worked correctly.
Thanks so much for your help.
is there any way to check that every step worked correctly?
if i want to return the phone (to claim on the warranty etc) would i just have to lock the boot loader?
Click to expand...
Click to collapse
check the about phone section to look at the build number and android version
yes, and you can do that now if you really want (i dont recommend it unless you really are going to stay 100% stock all the time). the command is: ./fastboot oem lock
am i correct in thinking if i do a factory restore that it wont get rid of jellybean.
tomthefear said:
am i correct in thinking if i do a factory restore that it wont get rid of jellybean.
Click to expand...
Click to collapse
Correct. It only removes all data and apps from the phone, including your sdcard
Sent from my Galaxy Nexus using Tapatalk 2
Last question...(probably)
is it likely that the retailer i bought the device from will be able to tell that i installed a new version of the operating system?
I have been having problems with the phone restarting itself randomly. I have read that this is quite a common problem and the hardware most likely needs replacing. but dont want them to think it was me tinkering that has caused this (they specifically asked if id tried to install a custom os)
cheers
yakjuxw JRO03C from IMM76K update is now available.