strange case - Samsung Galaxy Gio GT-S5660

I have one S5660, when I try to update via normal way: odin 4.42 + S5660_GIO_v1.0.ops + S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 flashing stops on mibib download, but if use Cooper_v1.0.ops instead of gio ops, everything work as charm.
Strange

wrong section.

Related

[Q] Flashing modem via Odin 4.43

Hi all,
To flash modem (baseband) via Odin 4.43 with modem.tar, do I put it in Phone or One Package?
I have Odin Multi Downloader 4.43.
Threads on older versions of Odin say you put it in Phone, but some people say you put it in One Package in Odin 4.43.
Thanks in advance.
if u put it in one package it will send it automatically during installing to the right partition i.e to phone
mosta_9741 said:
if u put it in one package it will send it automatically during installing to the right partition i.e to phone
Click to expand...
Click to collapse
Thanks mate!
mosta_9741 said:
if u put it in one package it will send it automatically during installing to the right partition i.e to phone
Click to expand...
Click to collapse
matthew01202 said:
Thanks mate!
Click to expand...
Click to collapse
Hi, i was trying to flash modem on my SGS+, but the standard processes i followed didn't work.
I did the below.
Rebooted phone in Download mode
Started Odin 4.43 on PC
Put AriesVE.ops in OPS section in Odin
Put the modem tar in PHONE section
Connected phone to PC USB
Pressed Start after phone was detected
The process went up to platform verification and nothing afterwards, for a long time.
Disconnected and rebooted, Baseband did not change.
Tried with Auto-Reboot on and off. No success.
Did it work for you? What steps did you follow ?
anoopgkris said:
Hi, i was trying to flash modem on my SGS+, but the standard processes i followed didn't work.
I did the below.
Rebooted phone in Download mode
Started Odin 4.43 on PC
Put AriesVE.ops in OPS section in Odin
Put the modem tar in PHONE section
Connected phone to PC USB
Pressed Start after phone was detected
The process went up to platform verification and nothing afterwards, for a long time.
Disconnected and rebooted, Baseband did not change.
Tried with Auto-Reboot on and off. No success.
Did it work for you? What steps did you follow ?
Click to expand...
Click to collapse
First You can have better response in the SGS+ forum as this is the SGW forum.
Second make sure that the odin ur device uses is the one ur device developers advised u about (for SGW its 4.43 but idk if its tthe same for SGS+).
Third if it's odin 4.43 that ur device uses then try connecting ur phone before opening the program, also make sure that the md5 checksum of ur tar file is correct (if its corrupted then it won't be verified & u'll have to redownload it or find another link for it) , finally u can try putting ur tar file in the "one package" option.

[Q] galaxy w nothing work

my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?
can you post sompe picture of that?
if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.
hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file
Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad

[Q] Samsung GT-i5510M brick, need help

hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..
skfunnyboy said:
hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..
Click to expand...
Click to collapse
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?
LS.xD said:
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?
Click to expand...
Click to collapse
yeah i'm pretty sure i'm using the correct version
(the name of the tar is I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar and the version of odin is 4.34, and i'm using the CALLISTO ops)
and no kies is still installed but i did flashed another samsung phone using odin and it worked, but ill try without kies installed, we never know :fingers-crossed:
Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.
try flashing stock ROM
dajhorn said:
Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.
Click to expand...
Click to collapse
i have the correct firmware image, the md5 is the same.
try this install stock firmware. If its not turning on. Install cwm recovery via odin and try to get into the recovery and install a rom(I installed kitkat experience rom by burnmode). Its working now alhamdulillah.
Sent from my GT-I5510 using XDA Free mobile app

[Q] Note 2 bricked after 4.4 update, can't get into recovery

After trying to update to kit kat my note 2 will not get past the "note 2" splash screen. What sucks even worse is that I can't get into recovery to install a new rom. I've been searching tons of threads and whatnot across XDA and other websites but nothing has worked.
What I've tried:
-Flashing TWRP, CWM, Philz recoveries. Odin says they succeeded but I still can't get to any of them.
-Flashing srock roms downloaded from multiple sources. When I try this I get an error in odin, usually fails right after sboot.bin
-Using other versions of Odin, different usb's, etc. Same stuff happens no matter what.
-Kies, but it won't connect and says device is unsupported.
-Android toolkit, but i couldn't really do much with it in this state
-I even tried re-partitioning with some t0lte pit file. This really didn't change anything.
-I found an "mk4_recovery.tar" file in a thread on here. That finished and succeeded, but I still can't get anywhere, However I did notice that this changed the "current binary" on my phone from "custom" to "official samsung binary." I'm not sure if that is important or not.
I feel like I am running out of options and my phone is hard-bricked. You guys are my last hope and I'm hoping there's something you guys can help me with!! If you have anything I can try please let me know!!!
SCAND1UM said:
After trying to update to kit kat my note 2 will not get past the "note 2" splash screen. What sucks even worse is that I can't get into recovery to install a new rom. I've been searching tons of threads and whatnot across XDA and other websites but nothing has worked.
What I've tried:
-Flashing TWRP, CWM, Philz recoveries. Odin says they succeeded but I still can't get to any of them.
-Flashing srock roms downloaded from multiple sources. When I try this I get an error in odin, usually fails right after sboot.bin
-Using other versions of Odin, different usb's, etc. Same stuff happens no matter what.
-Kies, but it won't connect and says device is unsupported.
-Android toolkit, but i couldn't really do much with it in this state
-I even tried re-partitioning with some t0lte pit file. This really didn't change anything.
-I found an "mk4_recovery.tar" file in a thread on here. That finished and succeeded, but I still can't get anywhere, However I did notice that this changed the "current binary" on my phone from "custom" to "official samsung binary." I'm not sure if that is important or not.
I feel like I am running out of options and my phone is hard-bricked. You guys are my last hope and I'm hoping there's something you guys can help me with!! If you have anything I can try please let me know!!!
Click to expand...
Click to collapse
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.
michael85tx said:
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
Click to expand...
Click to collapse
What a nightmare!
I odined back to stock MK4, did the 4.4.2 OTA last night. Then did the CF Auto Root via odin, installed custom recovery. The phone is currently on pageplus network. I started messing around, did the GSM Mod, then tried the international and domestic sim unlock procedures. The result was not satisfying, so I tried flashing different modems. Eventually CDMA works, but GSM not. So I made a huge mistake by attempting to downgrade from NE2. And of course failed. Now the phone can't register on either CDMA or GSM.
So once I flash M2 Stock with Count Reset, I can play with the 4.4.2 OTA zip again to get a 100% 4.4.2 system?
michael85tx said:
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.
Click to expand...
Click to collapse
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!
SCAND1UM said:
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!
Click to expand...
Click to collapse
I did the procedure everything went well but is there any way to update lastest firmware kitkat as i tried to and keep having to do the same procedure to unbrick it? thanks
brooklynman2020 said:
I did the procedure everything went well but is there any way to update lastest firmware kitkat as i tried to and keep having to do the same procedure to unbrick it? thanks
Click to expand...
Click to collapse
The best way to do the upgrade (since you know how to get your phone back if it happens again) is to just simply use Odin now to flash the 4.4.2 tar file thanks to "garwynn" for taking the time in making it.
http://forum.xda-developers.com/showthread.php?t=2780984
since most of my links don't work after I post lol I'm giving the download too. I tried uploading it but the file size is too big to post. So I hope this link works let me know and I'll re-upload it and post another link if the link stops working. 4.4.2 stock rom .tar
---------- Post added at 03:05 AM ---------- Previous post was at 02:55 AM ----------
lilila said:
What a nightmare!
I odined back to stock MK4, did the 4.4.2 OTA last night. Then did the CF Auto Root via odin, installed custom recovery. The phone is currently on pageplus network. I started messing around, did the GSM Mod, then tried the international and domestic sim unlock procedures. The result was not satisfying, so I tried flashing different modems. Eventually CDMA works, but GSM not. So I made a huge mistake by attempting to downgrade from NE2. And of course failed. Now the phone can't register on either CDMA or GSM.
So once I flash M2 Stock with Count Reset, I can play with the 4.4.2 OTA zip again to get a 100% 4.4.2 system?
Click to expand...
Click to collapse
sorry for the late reply but yes you can. I have gone back and forth trying to decide which 4.4.2 works best for service and style. lol right now I'm on 4.4.2 stock rooted (took FOREVER to get rooted I think it just finally clicked in I had given up). but there's already a .tar file for 4.4.2 you can just flash the .tar file and you have a OTA STOCK (unrooted) version of 4.4.2 for SPRINT only. It's the easiest way to get your phone back to working if it' soft bricked or just won't load recovery.
...NOTE... you can UPGRADE flash your bootloader (i.e. ... M2 .. MK4 ...N2) from Odin. You just CAN NOT downgrade firmware via Odin if you're going to go back to 4.1/4.2/4.3 versions. You will 99% of the time get "failed" at write to sboot .. for recovery I recommend Philz as it clears your cache and such when you flash roms and gapps and such for you.
---------- Post added at 03:10 AM ---------- Previous post was at 03:05 AM ----------
SCAND1UM said:
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!
Click to expand...
Click to collapse
You're welcome lol when it happened to me I wanted to punch a wall or something because I couldn't make a call to help me and there was no way Sprint would have helped me. It took me 8 hours to find it that day lol I had almost started giving up hope
You may already know this, but you also want to read up and see what versions of odin people are having success with. As well as what custom recoverys (and versions) seem to be working.
I used Odin v3.09 with no problems. Heard that others had success with v3.07
Flashed and running Philz custom recovery v6.0.4.5
I flashed update-supersu-v1.94.zip (originally flashed cwm-supersu-v0.94.zip, which DID NOT work). Supersu is a little buggy. On both the note2 and s3, after install apk would fc. Went to play store and updated supersu, supersu will then work (even "partially" disables knox for you)
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
g_money said:
You may already know this, but you also want to read up and see what versions of odin people are having success with. As well as what custom recoverys (and versions) seem to be working.
I used Odin v3.09 with no problems. Heard that others had success with v3.07
Flashed and running Philz custom recovery v6.0.4.5
I flashed update-supersu-v1.94.zip (originally flashed cwm-supersu-v0.94.zip, which DID NOT work). Supersu is a little buggy. On both the note2 and s3, after install apk would fc. Went to play store and updated supersu, supersu will then work (even "partially" disables knox for you)
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Yeah that's true I use Odin 3.09 Philz Recovery (latest version if that doesn't work the 6.07.09 has had some good success) and SU v1.93 is the one I have.
Stuck with 4.4.2 OTA
michael85tx said:
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.
Click to expand...
Click to collapse
Followed this procedure after accepting OTA and couldn't get chainfire autoroot to work. This worked flawlessly for me and I'm flashing again !!!!
lewisyiv said:
Followed this procedure after accepting OTA and couldn't get chainfire autoroot to work. This worked flawlessly for me and I'm flashing again !!!!
Click to expand...
Click to collapse
Where is the fix file for download? I cant flash the tar file, all time show fail in odin, I was try with firmware 4.4.2, 4.2, 4.1.2 and nothing my note 2 enter in download mode but not in recovery mode, alwais is in bootloop in logo... maybe I have brick?
vegitamaster66 said:
Where is the fix file for download? I cant flash the tar file, all time show fail in odin, I was try with firmware 4.4.2, 4.2, 4.1.2 and nothing my note 2 enter in download mode but not in recovery mode, alwais is in bootloop in logo... maybe I have brick?
Click to expand...
Click to collapse
Two post above you or in the quote above you has the link for fix. You need to follow the first link (xda thread link) and it will take you to my post that has the upload.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Second post in this thread helped me immensely. Thank you!
I broke my note 2 that I had rooted and was running rwilco's mostly stock rom on.
Got another note 2 off craigslist and decided I should root it too for speed and for tethering. Tried the liquid smooth rom and it failed leaving me with no ROM.
Every ROM I tried failed until I found this thread and used Odin to flash "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" that was linked.
So phone is now running 4.4.2 can I safely try again to load a custom ROM?
What do I need to do to make sure I don't have the same problem?
I'm not really savvy with this stuff but I can follow destructions
does any of the above steps wipe internal data?

[Q] galaxy ace 2 recovery mode doesn't work

Hello, I had cyanogenmod 10 installed in my samsung galaxy ace 2, today I decided to go back to gingerbread stockrom, I installed it using odin. My problem is that after I installed it the phone reboot but is stuck in the logo and when I try to go into recovery mode it doesnt work, it is stuck in the logo aswell. Do you know why? Can someone please help me to fix this problem.
Please let me know
Thank You
Sound like you flashed "normal" GB FW over CM10... This will not work correctly...
I recommend to flash an 3-Parted FW which overwrites all partitions...
Which Phone do you have exactly? 8160 or 8160P (with NFC) ?
I hope ODIN Download mode is still working? If yes use the linked FW according to your Phone:
For 8160 (non-p!!! without NFC)
https://disk.yandex.com/public/?hash=/zqZ3hO+5ywX2k49+Jam82OsW3/yjdXoARzJAIFaCE0=
For 8160P (with NFC)
http://d-h.st/fWn
Extract the file and set ODIN as mentioned here: http://forum.xda-developers.com/showthread.php?t=2426437
If something is not working do a complete factory reset/wipe data and wipe cache in Recovery Mode afterwards...
fluffi444 said:
Sound like you flashed "normal" GB FW over CM10... This will not work correctly...
I recommend to flash an 3-Parted FW which overwrites all partitions...
Which Phone do you have exactly? 8160 or 8160P (with NFC) ?
I hope ODIN Download mode is still working? If yes use the linked FW according to your Phone:
For 8160 (non-p!!! without NFC)
https://disk.yandex.com/public/?hash=/zqZ3hO+5ywX2k49+Jam82OsW3/yjdXoARzJAIFaCE0=
For 8160P (with NFC)
http://d-h.st/fWn
Extract the file and set ODIN as mentioned here: http://forum.xda-developers.com/showthread.php?t=2426437
If something is not working do a complete factory reset/wipe data and wipe cache in Recovery Mode afterwards...
Click to expand...
Click to collapse
Thank You very muuuchhh!! I followed your suggestion and the phone is working again!!! thank you sooo muuuch!!!!

Categories

Resources