Develop Bugs

White screen after improper flashing

Hi Guys
My stupid friend wanted to flash his Gio (Gingerbread 2.3.4). He rebooted to recovery, flashed update.zip (root zip), and after that, without rebooting, he flashed (maybe rather he wanted to flash ) CM9.
Now he got a white screen after pushing power button. Nothing more happens. Recovery works (Home+Power combination). What to do?
Reflash original rom with Odin?
http://www.androidauthority.com/galaxy-gio-s5660-root-68206/
Try to flash CWM from link above? Should it work?
Help guyz. :good:

reflash with odin and dont flash anything else after tell if thats works

warface123 said:
reflash with odin and dont flash anything else after tell if thats works
Click to expand...
Click to collapse
Any tutorial?
Here's something
http://forum.xda-developers.com/showthread.php?t=1573628
But:
"Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)"
Recovery in this phone works fine.
Maybe there's a way to re-flash phone using this recovery?

download this rom and flash it with recovery remember to use px recovery link for it mirror.phiexz.com/
rom thread it is based on stock rom but extremely fast link forum.xda-developers.com/showthread.php?t=1683638

he can flash px-recovery,then cm9(dont forget to do wipe)
Sent from my LT26i using Tapatalk 2

my recovery wont work either,phone isnt recogniced with lsusb and odin...how to handle than?

i8160 stuck at "Samsung Galaxy Ace 2" screen

Hi there!
Im trying to fix my phone for 3 hours, but i did not find any solution for my problem.
So the story:
I tried to upgrade to JB 4.1.2 (i had MIUI), i went to recovery mode, wiped user data, then dalvic cache, and cache, after that, i turned off my phone and flashed 4.1.2 through Odin. Odin said PASS, then i disconnected my phone, turned on. Stuck @ Samsung Galaxy Ace 2 screen.
I tried to re-flash the stock 4.1.2 rom, still the same thing happened. Then i tried to re-partition the phone (inserted PIT and 4.1.2 stock rom), nothing
I can not enter recovery mode, only download mode
NEED HELP!:crying:

This was said seveal times - Flash 3-parted FW if you want to come back from custom ROM
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8

Thanks, Im going to try it now
I'll send the results!
fluffi444 said:
This was said seveal times - Flash 3-parted FW if you want to come back from custom ROM
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Click to expand...
Click to collapse

Working fine! Thanks!

Ace2 - Bricked

Hi,
My Ace 2 is bricked. When I turn on my phone it stays on the Samsung logo.:crying::crying:
I can not get into the recovery but I can get into the service mode.
I tried to flash gingeberd and jellybean with odin. But when the device reboots it stays on the Samsung logo. U8500 USB drive appears on the computer ROM.
Any help?

Any can help me?

Flash 3.Parted full FW according to your phone... Be sure that you pick 8160 or 8160P according to your phone
Use the GB Version (if you have 8160P) For 8160 we have only GB...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Set ODIN as mentioned here:
http://forum.xda-developers.com/showthread.php?t=2426437

Thank you very much for responding.
I'll try it

I have try this method and flashed the three file(Code,csc,pit) throgh Odin3 v3.07 with "Auto Reboot", "Re-Partition" "F. Reset Time" flags marked. Flashing is apparently succesfull (whith "PASS!" status shown and phone rebooting), but still stuck at initial logo.

Still no recovery mode?

No :crying:

mmmm - strange - is it an 8160 or an 8160P?
If 8160 (non-P) try the leaked JB MB4
http://getwapi.com/search/view/zip/WNlx-UxLba/I8160-EUR-I8160XXMB4-136126789.html
Klick on Download I8160-EUR-I8160XXMB4-1361267890.zip
There is no PIT file - Use the one I attached.... de-pack it first (of course)

It is a gt-i8160.
I'll download it. This afternoon I install.
Thank you very much.

Some more things to try... if MB4 does nothing...
Flash again GB 3-Parted...
Don't let the Phone boot - go directly to Download-Mode again
flash with ODIN - Kernel with CWM for your phone....
http://forum.xda-developers.com/attachment.php?attachmentid=1435144&d=1351351603
Out of this thread...
http://forum.xda-developers.com/showpost.php?p=32682067&postcount=644
Try to go direcly in CWM Recovery mode after flashing Kenel.... If you are in CWM do format SYSTEM, DATA, CACHE, INTERNAL SDCARD...
Go directly in Downloadmode and Flash 3-Parted Again.... Hopefully it will boot....

hi,
It does not work.
I have tried from odin and I've tried from heimdall.
When I flash the http://d-h.st/AZN.
I realize the steps described here:
http://forum.xda-developers.com/showthread.php?t=2426437
But I get the error: There is no pit partition.
I have looked with heimdall and the partition is in the system.
I've tried installing I8160XXLI2_CWM_5.0.2.6_ANT.tar.md5 in PDA section.
Setting the phone to restart and when restart the phone is locked. I can not start . To start I have to remove the battery and put it. And I can not go to recovery.
It only shows the logo of Samsung
Thanks,
Alejandro

backglass said:
hi,
It does not work.
I have tried from odin and I've tried from heimdall.
When I flash the http://d-h.st/AZN.
I realize the steps described here:
http://forum.xda-developers.com/showthread.php?t=2426437
But I get the error: There is no pit partition.
I have looked with heimdall and the partition is in the system.
I've tried installing I8160XXLI2_CWM_5.0.2.6_ANT.tar.md5 in PDA section.
Setting the phone to restart and when restart the phone is locked. I can not start . To start I have to remove the battery and put it. And I can not go to recovery.
It only shows the logo of Samsung
Thanks,
Alejandro
Click to expand...
Click to collapse
If you are from Germany I could help further (with Riff box) but other wise I am out off ideas... sry

I'm not from germany.
But thank you very much, I will try to take it for repair.

[Q] (Q) GetBricked

Can somebody help me ?
i have GT-i8160 its stay at samsung logo cause i'm try to swap memory at novafusion ROM for the first its working fine but i dont know what happend its just off. i tri too turn on but just stay at samsung logo, my CWM its suck cant load to cwm mode just ODIN mode , and i tried too flashing some stockrom GB or JB its same, nothings has changes. (softbrick , no recovery, odin/download mode is yes)

As usual I recommend to flash 3-parted full GB FW with ODIN 3.07 - Your data is away then...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8

fluffi444 said:
As usual I recommend to flash 3-parted full GB FW with ODIN 3.07 - Your data is away then...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Click to expand...
Click to collapse
Hii i already try that way, but nothing has changes. Still stack at samsung logo and no recovery

GT-N7105 bootloops Samsung logo

Trying to fix a friend's GT-N7105. At the moment it just bootloops the Samsung bootloader screen (which shows the model number GT-N7105).
I can boot it into download mode just fine. On download mode it just says that both the "Current Binary" and "System Status" are "Custom".
I've tried flashing the stock ROM for the phone (the latest for the Optus version) with Odin. I've also tried doing a firmware restore through Kies 2. Both of these complete fine, but the phone continues bootlooping the Samsung logo.
I've tried directly flashing the newest bootloader with Odin, and I've tried flashing a custom recovery with Odin. I've tried flashing the stock firmware with the device's PIT file and re-partition selected. Nothing seems to change how the phone behaves. I can't boot into recovery mode (it just continues the Samsung logo bootlooping).
The emmc doesn't seem busted, since it happily downloads the full system.img when flashing. Odin/Kies finish flashing without errors, so I'm stumped. Any ideas?

Passa91 said:
Trying to fix a friend's GT-N7105. At the moment it just bootloops the Samsung bootloader screen (which shows the model number GT-N7105).
I can boot it into download mode just fine. On download mode it just says that both the "Current Binary" and "System Status" are "Custom".
I've tried flashing the stock ROM for the phone (the latest for the Optus version) with Odin. I've also tried doing a firmware restore through Kies 2. Both of these complete fine, but the phone continues bootlooping the Samsung logo.
I've tried directly flashing the newest bootloader with Odin, and I've tried flashing a custom recovery with Odin. I've tried flashing the stock firmware with the device's PIT file and re-partition selected. Nothing seems to change how the phone behaves. I can't boot into recovery mode (it just continues the Samsung logo bootlooping).
The emmc doesn't seem busted, since it happily downloads the full system.img when flashing. Odin/Kies finish flashing without errors, so I'm stumped. Any ideas?
Click to expand...
Click to collapse
Make sure that you have pressed power + volume up + home button to boot into recovery (maybe you have known already)
And try to format everything: data, system, cache,...Wipe everything. There should be some adb commands to do it without recovery. After that reflash stock ROM again to see if it work.

@Passa91
 @ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards

xcorona said:
@Passa91
@ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards
Click to expand...
Click to collapse
Thanks for that. This seems to be for the N7100. I tried flashing that file both as is and when replacing the included recovery with one appropriate for the N7105. Still just boots back to the bootloader (looping, same as before). Certainly didn't make anything worse.
If I leave it alone, sometimes it randomly makes it to the animated Samsung logo, where it plays the boot sound (dun dun dun duuun dun), but then this animation loops forever (I have tried leaving it overnight).

Passa91 said:
Thanks for that. This seems to be for the N7100. I tried flashing that file both as is and when replacing the included recovery with one appropriate for the N7105. Still just boots back to the bootloader (looping, same as before). Certainly didn't make anything worse.
If I leave it alone, sometimes it randomly makes it to the animated Samsung logo, where it plays the boot sound (dun dun dun duuun dun), but then this animation loops forever (I have tried leaving it overnight).
Click to expand...
Click to collapse
sorry to hear that
i think N7105 differs from N7100 {modem & kernel (boot*img ) }afaik, I cannot confirm
anyhow I did not find an alert from the developer regarding this matter (N7105/N7100) in his post
https://forum.xda-developers.com/showthread.php?t=1932327
at last thanks for reporting your results
Regards

xcorona said:
@Passa91
@ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards
Click to expand...
Click to collapse
I've flashed the file, but still having the same bootloop problem. It is ok, I have ordered a new motherboard now. Thanks for the input.