Can somebody help me ?
i have GT-i8160 its stay at samsung logo cause i'm try to swap memory at novafusion ROM for the first its working fine but i dont know what happend its just off. i tri too turn on but just stay at samsung logo, my CWM its suck cant load to cwm mode just ODIN mode , and i tried too flashing some stockrom GB or JB its same, nothings has changes. (softbrick , no recovery, odin/download mode is yes)
As usual I recommend to flash 3-parted full GB FW with ODIN 3.07 - Your data is away then...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
fluffi444 said:
As usual I recommend to flash 3-parted full GB FW with ODIN 3.07 - Your data is away then...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Click to expand...
Click to collapse
Hii i already try that way, but nothing has changes. Still stack at samsung logo and no recovery
Related
Hi, ioday i'll explain how to recover your samsung galaxy grand GT-I9082 from bootloop (bricked).
I can't assure that it will work 100% on all device, but 99% it works, No harm in trying.
1 - Downloadthe required firmware file (Link - http://www.hotfile.com/dl/202066152/439a45a/I9082XXAMCD_I9082ODDMB2_INU.zip.html )
2 - Now extract the zip file you downloaded
3 - Open odin 3.07 in your pc
4 - switch off your phone and into download mode ( vol up + home + power ) and press vol up to proceed and connect to pc via usb
5 - The ID:COM port in odin should turn blue or yellow
6 - Now click on PDA and locate the firmware file (a .tar.md5 file)
7 - Click on start
8 - Now odin will start flashing the firmware file, it will take some time don't panic
9 - After completion odin will say 'PASS' and your phone will reboot now
10 - Boot into recovery mode quickly and wipe data and all types of cache
11 - Reboot your devive now and your phone should be back in normal state
:good: CONGRATULATIONS !, YOU HAVE SUCESSFULLY RECOVERED YOUR DEVICE FROM BOOTLOOP :good:
:
Hit thanks if this helped you
PS - contact me for any help regarding this
Mr
Thank for this. so were can i dowload the file? hotfile is off line?
Please Help
batcho71 said:
Thank for this. so were can i dowload the file? hotfile is off line?
Please Help
Click to expand...
Click to collapse
Samfirmwares
reply
Suriya357 said:
Hi, ioday i'll explain how to recover your samsung galaxy grand GT-I9082 from bootloop (bricked).
I can't assure that it will work 100% on all device, but 99% it works, No harm in trying.
1 - Downloadthe required firmware file (Link - http://www.hotfile.com/dl/202066152/439a45a/I9082XXAMCD_I9082ODDMB2_INU.zip.html )
2 - Now extract the zip file you downloaded
3 - Open odin 3.07 in your pc
4 - switch off your phone and into download mode ( vol up + home + power ) and press vol up to proceed and connect to pc via usb
5 - The ID:COM port in odin should turn blue or yellow
6 - Now click on PDA and locate the firmware file (a .tar.md5 file)
7 - Click on start
8 - Now odin will start flashing the firmware file, it will take some time don't panic
9 - After completion odin will say 'PASS' and your phone will reboot now
10 - Boot into recovery mode quickly and wipe data and all types of cache
11 - Reboot your devive now and your phone should be back in normal state
:good: CONGRATULATIONS !, YOU HAVE SUCESSFULLY RECOVERED YOUR DEVICE FROM BOOTLOOP :good:
:
Hit thanks if this helped you
PS - contact me for any help regarding this
Click to expand...
Click to collapse
sir how about the galaxy grand duos that cant enter to download mode even if they press the combination button. how they can possible unbrick thier phone!! thanks
unable to install latest cwm for kitkat
helpp..!!! i just cant install the latest version of cwm 6.0.4.4 even tried TWRP for kitkat, although i am able to install old cwm recoveries bt when i install newest version of cwm for kitkat it stucks at GT I9082 screen. plz help...
i have tried flashing by odin and through zip also, bt no help.
affi123 said:
helpp..!!! i just cant install the latest version of cwm 6.0.4.4 even tried TWRP for kitkat, although i am able to install old cwm recoveries bt when i install newest version of cwm for kitkat it stucks at GT I9082 screen. plz help...
i have tried flashing by odin and through zip also, bt no help.
Click to expand...
Click to collapse
make sure stock version is 4.2.2 then use philstouch recovery
169
Suriya357 said:
Hi, ioday i'll explain how to recover your samsung galaxy grand GT-I9082 from bootloop (bricked).
I can't assure that it will work 100% on all device, but 99% it works, No harm in trying.
1 - Downloadthe required firmware file
2 - Now extract the zip file you downloaded
3 - Open odin 3.07 in your pc
4 - switch off your phone and into download mode ( vol up + home + power ) and press vol up to proceed and connect to pc via usb
5 - The ID:COM port in odin should turn blue or yellow
6 - Now click on PDA and locate the firmware file (a .tar.md5 file)
7 - Click on start
8 - Now odin will start flashing the firmware file, it will take some time don't panic
9 - After completion odin will say 'PASS' and your phone will reboot now
10 - Boot into recovery mode quickly and wipe data and all types of cache
11 - Reboot your devive now and your phone should be back in normal state
:good: CONGRATULATIONS !, YOU HAVE SUCESSFULLY RECOVERED YOUR DEVICE FROM BOOTLOOP :good:
:
Hit thanks if this helped you
PS - contact me for any help regarding this
Click to expand...
Click to collapse
I've done that a lot of times but it keeps failing. Even with the PIT file. Is my phone dead?
Hi Suriya,
My Samsung Galaxy Grand is stuck in boot loop.
I want to try your method but I am afraid that the phone data will be lost..
Could please let me know that the data will remain or not?
Thanks & Regards
Lucy
Lucy Gray said:
Hi Suriya,
My Samsung Galaxy Grand is stuck in boot loop.
I want to try your method but I am afraid that the phone data will be lost..
Could please let me know that the data will remain or not?
Thanks & Regards
Lucy
Click to expand...
Click to collapse
try this easy method but it will wipe ur data
Wipe Data/Factory Reset
Wipe Cache
Wipe Dalvik Cache
Reboot
Is there any way to save the data?
Is there any way to save the data?
Rommel Espinosa said:
try this easy method but it will wipe ur data
Wipe Data/Factory Reset
Wipe Cache
Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
Lucy Gray said:
Is there any way to save the data?
Click to expand...
Click to collapse
yeah but if u backup ur rom..but if u restore it bootloop will come again..other way is titanium backup but the problem is ur phone is in bootloop stage..thats why the only way is to try wiping ur data..or if wiping data will not be resolve the problem u need to flash the stock firmware
Hii Rommel,
thanks for your time..
are there any external devices available which can read the data in my phone ?
actually , i badly want my whatsapp chats back..
please advise me if there is any possible way..
Rommel Espinosa said:
yeah but if u backup ur rom..but if u restore it bootloop will come again..other way is titanium backup but the problem is ur phone is in bootloop stage..thats why the only way is to try wiping ur data..or if wiping data will not be resolve the problem u need to flash the stock firmware
Click to expand...
Click to collapse
Lucy Gray said:
Hii Rommel,
thanks for your time..
are there any external devices available which can read the data in my phone ?
actually , i badly want my whatsapp chats back..
please advise me if there is any possible way..
Click to expand...
Click to collapse
i dont know if Samsung Kies will detect ur phone even its in booting stage
H-Data Recovery Master is not bad. I tried a lot of recovery tool, only H-Data Recover 95% of my lost files. Download and install H-Data Recovery Master(hdatarecovery.com).
cant bootup the device in any mode
Problem with wifi and bluetooth Samsung Galaxy Grand Neo Duos GT-I9060
Hi, my wifi and bluetooth does not work, I've installed a new firmware and is on the same!
My device is Samsung Galaxy Grand Neo Duos GT-I9060
I don't know what to do!
Gratitude
thnkz.... it has done d work for me :good:
how to recover phone from bootloop
i wanted to ask that how should i recover my device it is stuck on samsung logo . I installed cm13 rom first then i reseted the device because of some problems so i got stuck on samsung logo plss help what to do?? do i need to reintall the rom again or it will work by install clockmod??
help i already did this but it still reboots my device!!! id every single stepss even tried other stock versons of it like 4.1.2
my handset is totally dead
my handset is totally dead while ota update then how can I go to download mode
please help me soon
Hello, I had cyanogenmod 10 installed in my samsung galaxy ace 2, today I decided to go back to gingerbread stockrom, I installed it using odin. My problem is that after I installed it the phone reboot but is stuck in the logo and when I try to go into recovery mode it doesnt work, it is stuck in the logo aswell. Do you know why? Can someone please help me to fix this problem.
Please let me know
Thank You
Sound like you flashed "normal" GB FW over CM10... This will not work correctly...
I recommend to flash an 3-Parted FW which overwrites all partitions...
Which Phone do you have exactly? 8160 or 8160P (with NFC) ?
I hope ODIN Download mode is still working? If yes use the linked FW according to your Phone:
For 8160 (non-p!!! without NFC)
https://disk.yandex.com/public/?hash=/zqZ3hO+5ywX2k49+Jam82OsW3/yjdXoARzJAIFaCE0=
For 8160P (with NFC)
http://d-h.st/fWn
Extract the file and set ODIN as mentioned here: http://forum.xda-developers.com/showthread.php?t=2426437
If something is not working do a complete factory reset/wipe data and wipe cache in Recovery Mode afterwards...
fluffi444 said:
Sound like you flashed "normal" GB FW over CM10... This will not work correctly...
I recommend to flash an 3-Parted FW which overwrites all partitions...
Which Phone do you have exactly? 8160 or 8160P (with NFC) ?
I hope ODIN Download mode is still working? If yes use the linked FW according to your Phone:
For 8160 (non-p!!! without NFC)
https://disk.yandex.com/public/?hash=/zqZ3hO+5ywX2k49+Jam82OsW3/yjdXoARzJAIFaCE0=
For 8160P (with NFC)
http://d-h.st/fWn
Extract the file and set ODIN as mentioned here: http://forum.xda-developers.com/showthread.php?t=2426437
If something is not working do a complete factory reset/wipe data and wipe cache in Recovery Mode afterwards...
Click to expand...
Click to collapse
Thank You very muuuchhh!! I followed your suggestion and the phone is working again!!! thank you sooo muuuch!!!!
Hi there!
Im trying to fix my phone for 3 hours, but i did not find any solution for my problem.
So the story:
I tried to upgrade to JB 4.1.2 (i had MIUI), i went to recovery mode, wiped user data, then dalvic cache, and cache, after that, i turned off my phone and flashed 4.1.2 through Odin. Odin said PASS, then i disconnected my phone, turned on. Stuck @ Samsung Galaxy Ace 2 screen.
I tried to re-flash the stock 4.1.2 rom, still the same thing happened. Then i tried to re-partition the phone (inserted PIT and 4.1.2 stock rom), nothing
I can not enter recovery mode, only download mode
NEED HELP!:crying:
This was said seveal times - Flash 3-parted FW if you want to come back from custom ROM
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Thanks, Im going to try it now
I'll send the results!
fluffi444 said:
This was said seveal times - Flash 3-parted FW if you want to come back from custom ROM
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Click to expand...
Click to collapse
Working fine! Thanks!
Hi,
My Ace 2 is bricked. When I turn on my phone it stays on the Samsung logo.:crying::crying:
I can not get into the recovery but I can get into the service mode.
I tried to flash gingeberd and jellybean with odin. But when the device reboots it stays on the Samsung logo. U8500 USB drive appears on the computer ROM.
Any help?
Any can help me?
Flash 3.Parted full FW according to your phone... Be sure that you pick 8160 or 8160P according to your phone
Use the GB Version (if you have 8160P) For 8160 we have only GB...
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Set ODIN as mentioned here:
http://forum.xda-developers.com/showthread.php?t=2426437
Thank you very much for responding.
I'll try it
I have try this method and flashed the three file(Code,csc,pit) throgh Odin3 v3.07 with "Auto Reboot", "Re-Partition" "F. Reset Time" flags marked. Flashing is apparently succesfull (whith "PASS!" status shown and phone rebooting), but still stuck at initial logo.
Still no recovery mode?
No :crying:
mmmm - strange - is it an 8160 or an 8160P?
If 8160 (non-P) try the leaked JB MB4
http://getwapi.com/search/view/zip/WNlx-UxLba/I8160-EUR-I8160XXMB4-136126789.html
Klick on Download I8160-EUR-I8160XXMB4-1361267890.zip
There is no PIT file - Use the one I attached.... de-pack it first (of course)
It is a gt-i8160.
I'll download it. This afternoon I install.
Thank you very much.
Some more things to try... if MB4 does nothing...
Flash again GB 3-Parted...
Don't let the Phone boot - go directly to Download-Mode again
flash with ODIN - Kernel with CWM for your phone....
http://forum.xda-developers.com/attachment.php?attachmentid=1435144&d=1351351603
Out of this thread...
http://forum.xda-developers.com/showpost.php?p=32682067&postcount=644
Try to go direcly in CWM Recovery mode after flashing Kenel.... If you are in CWM do format SYSTEM, DATA, CACHE, INTERNAL SDCARD...
Go directly in Downloadmode and Flash 3-Parted Again.... Hopefully it will boot....
hi,
It does not work.
I have tried from odin and I've tried from heimdall.
When I flash the http://d-h.st/AZN.
I realize the steps described here:
http://forum.xda-developers.com/showthread.php?t=2426437
But I get the error: There is no pit partition.
I have looked with heimdall and the partition is in the system.
I've tried installing I8160XXLI2_CWM_5.0.2.6_ANT.tar.md5 in PDA section.
Setting the phone to restart and when restart the phone is locked. I can not start . To start I have to remove the battery and put it. And I can not go to recovery.
It only shows the logo of Samsung
Thanks,
Alejandro
backglass said:
hi,
It does not work.
I have tried from odin and I've tried from heimdall.
When I flash the http://d-h.st/AZN.
I realize the steps described here:
http://forum.xda-developers.com/showthread.php?t=2426437
But I get the error: There is no pit partition.
I have looked with heimdall and the partition is in the system.
I've tried installing I8160XXLI2_CWM_5.0.2.6_ANT.tar.md5 in PDA section.
Setting the phone to restart and when restart the phone is locked. I can not start . To start I have to remove the battery and put it. And I can not go to recovery.
It only shows the logo of Samsung
Thanks,
Alejandro
Click to expand...
Click to collapse
If you are from Germany I could help further (with Riff box) but other wise I am out off ideas... sry
I'm not from germany.
But thank you very much, I will try to take it for repair.
Trying to fix a friend's GT-N7105. At the moment it just bootloops the Samsung bootloader screen (which shows the model number GT-N7105).
I can boot it into download mode just fine. On download mode it just says that both the "Current Binary" and "System Status" are "Custom".
I've tried flashing the stock ROM for the phone (the latest for the Optus version) with Odin. I've also tried doing a firmware restore through Kies 2. Both of these complete fine, but the phone continues bootlooping the Samsung logo.
I've tried directly flashing the newest bootloader with Odin, and I've tried flashing a custom recovery with Odin. I've tried flashing the stock firmware with the device's PIT file and re-partition selected. Nothing seems to change how the phone behaves. I can't boot into recovery mode (it just continues the Samsung logo bootlooping).
The emmc doesn't seem busted, since it happily downloads the full system.img when flashing. Odin/Kies finish flashing without errors, so I'm stumped. Any ideas?
Passa91 said:
Trying to fix a friend's GT-N7105. At the moment it just bootloops the Samsung bootloader screen (which shows the model number GT-N7105).
I can boot it into download mode just fine. On download mode it just says that both the "Current Binary" and "System Status" are "Custom".
I've tried flashing the stock ROM for the phone (the latest for the Optus version) with Odin. I've also tried doing a firmware restore through Kies 2. Both of these complete fine, but the phone continues bootlooping the Samsung logo.
I've tried directly flashing the newest bootloader with Odin, and I've tried flashing a custom recovery with Odin. I've tried flashing the stock firmware with the device's PIT file and re-partition selected. Nothing seems to change how the phone behaves. I can't boot into recovery mode (it just continues the Samsung logo bootlooping).
The emmc doesn't seem busted, since it happily downloads the full system.img when flashing. Odin/Kies finish flashing without errors, so I'm stumped. Any ideas?
Click to expand...
Click to collapse
Make sure that you have pressed power + volume up + home button to boot into recovery (maybe you have known already)
And try to format everything: data, system, cache,...Wipe everything. There should be some adb commands to do it without recovery. After that reflash stock ROM again to see if it work.
@Passa91
@ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards
xcorona said:
@Passa91
@ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards
Click to expand...
Click to collapse
Thanks for that. This seems to be for the N7100. I tried flashing that file both as is and when replacing the included recovery with one appropriate for the N7105. Still just boots back to the bootloader (looping, same as before). Certainly didn't make anything worse.
If I leave it alone, sometimes it randomly makes it to the animated Samsung logo, where it plays the boot sound (dun dun dun duuun dun), but then this animation loops forever (I have tried leaving it overnight).
Passa91 said:
Thanks for that. This seems to be for the N7100. I tried flashing that file both as is and when replacing the included recovery with one appropriate for the N7105. Still just boots back to the bootloader (looping, same as before). Certainly didn't make anything worse.
If I leave it alone, sometimes it randomly makes it to the animated Samsung logo, where it plays the boot sound (dun dun dun duuun dun), but then this animation loops forever (I have tried leaving it overnight).
Click to expand...
Click to collapse
sorry to hear that
i think N7105 differs from N7100 {modem & kernel (boot*img ) }afaik, I cannot confirm
anyhow I did not find an alert from the developer regarding this matter (N7105/N7100) in his post
https://forum.xda-developers.com/showthread.php?t=1932327
at last thanks for reporting your results
Regards
xcorona said:
@Passa91
@ginga133
I can access to recovery mod from odin !
I confirm when I flash this file (BTW it is recovery & cash fix file made by chainfire ) , via odin my phone reboot into stock recovery !!
you can try it At your own risk
here ( in recovery) you can do what you need (delete cash / data..... reboot)
my PC win10 pro 64bit, odin v3.11.1
my phone N7100 twrp 3.0.2.0 , stock kernel , custom rom......
kindly check attached pictures
at last I hope it will help
Regards
Click to expand...
Click to collapse
I've flashed the file, but still having the same bootloop problem. It is ok, I have ordered a new motherboard now. Thanks for the input.