Does anybody else have a problem with their Play's touch screen?
It is when my hands are warm or clammy or in a hot environment, or if my hands are sweating a little.. then when typing the touch screen just goes crazy. By crazy, I mean it keeps making random taps everywhere, and with Swype keyboard, gets really annoying!!!
Any tips? I have tried cooling down my hands under cold tap, using paper towels to dry them, drying the screen. I think maybe it is because the phone gets warm because overclocking to 1.5GHz...
Yeah, I had the same "problem". The touchscreen is thermal-based so it will act accordingly to any thermal temperature imput. For example, try blowing hot air to your screen for a short period of time; you'll notice it will go as crazy as you described it. To me, it happened when I was speaking to someone for a long time, my ear heated the screen and after the call ended, the phone was acting on his own.
Cleaning the screen will solve this funny problem.
Not too hot in the UK so not really faced this problem. What is annoying is when I'm in the middle of swyping and the phone just stops my Swype and doesn't work temporarily when I Swype over certain letters
Sent from my R800i using xda app-developers app
Well, my touch screen basically quit on me... sometimes there is massive touch screen lag, and after awhile it just quits...
Sent from my R800x using xda premium
Hmm, I am in the UK.. it isn't that hot, I am even in an air-conditioned office but as soon as my hands get a bit clammy (always!) then it just goes crazy on me. I thought it might be the screen protector, so I took it off, but still having problems. It is getting to the point where I am considering a new phone.
Try punching it
Disclaimer: not guaranteed to work (although I have tried it before)
Sent from my R800i using xda app-developers app
Yes punching is a resourceful method of permanently ending all of these problems. But if you're looking for something a bit more temporary in it's resolution, use some rubbing alcohol, and clean the screen with it. Also your flex cable could be on the way out... when it starts wearing out it does this. Open the gamepad the next time it starts going mad and you will see it stops
I'm not having any probs. Normally when its hot, my stock ROM get into 42celsius .. With overclocking it would be 50+..
Sent from my r800i
KindaUndisputed said:
Not too hot in the UK so not really faced this problem. What is annoying is when I'm in the middle of swyping and the phone just stops my Swype and doesn't work temporarily when I Swype over certain letters
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I'm in the UK and I have this problem every day, I've had to start using a stylus to type, it's so slow, I posted about it in the Q&A section and someone said to get a screen protector.
I have the same issues, too.. it sucks, it's making it very hard to swype.
I have noticed if I swype in landscape the problem doesn't exist, only in portrait.
And, I've flashed a new rom and it still happens, so not a software issue.
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Hard to replace cable? I was thinking about ordering a new touch screen digitizer but when watching the tear down didn't wanna take apart the entire phone.
Yes this does happen. This also happens when the charger is plugged in.
Sent from my R800i using xda app-developers app
I had a screen protector and still had the issue, in fact it seemed worse with that, so I ripped it off out of frustration.
I will try some rubbing alcohol (may get some alcohol wipes or something) as I know that dries things out, and it seems to be moisture and heat that makes it bad.
I guess my next question is, why does it only happen in portrait mode? (if it is the ribbon cable thing, that sucks).
And also, is this an issue for other phones? I am guessing not
I've found that if my screen starts going "click crazy". I just turn off the screen and turn it back on and it solves it.
Why it happens? You got me.
danieljamie said:
I had a screen protector and still had the issue, in fact it seemed worse with that, so I ripped it off out of frustration.
I will try some rubbing alcohol (may get some alcohol wipes or something) as I know that dries things out, and it seems to be moisture and heat that makes it bad.
I guess my next question is, why does it only happen in portrait mode? (if it is the ribbon cable thing, that sucks).
And also, is this an issue for other phones? I am guessing not
Click to expand...
Click to collapse
It happens to me in Landscape too
....so no-one has a fix for it?
No idea.. sucks because looks like a bunch of us have this issue, too.
Same prob here!
It starts a few months after I buy the phone, and I take it to the warranty.
They changed not only the screen, but the whole front part, and it seem that was ok. But some months ago I noticed that it was back.
I already try using stock GB, other GB roms, ICS roms, and the problem continues.
But for me it happens only in landscape mode. In portrait mode I rarely have problems.
had this problem before I bought a decent quality screen protector.
Sent from my R800i using Tapatalk 2
UndisputedGuy said:
Try punching it
Disclaimer: not guaranteed to work (although I have tried it before)
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
what do you mean by punching?
I am desperate in trying to fix my Play. I want to try everything first before I buy a digitizer.
Also happens to me, when it does i lock the screen, wipe it with my shirt and i turn it back on and it's fine.
Related
hey there guys and girls,
This is my first post and was just wondering about my xperia plays touchscreen. I bought it almost a year ago and since i got it the problem has been occuring. Its not major dont get me wrong but it can be really annoying when i am texting my frineds. What happens is that i will press a letter then it will just decide to press a bunch if other letters next to them. Also the keyboard will randomly go down so ill end up clicking send and completely wasting a text.
Any help would be great... Thanks xD
Large fingers? lets hope its not a digitizer problem but you did state its been happening since you got the phone. the xperia play does seem to me to be more sensitive to the amount of pressure needed or not needed; or is it just me?
Got used to using swype keyboard on my sgs and haven't used the stock keyboard on the play.
you could try to clear data for the keyboard Settings>Applications>Manage Applications>All>"keyboard"
maybe another keyboard will solve your problem entirely, there are plenty of them on the market/store.
this is just one as there are many
https://play.google.com/store/apps/...xLDEsImNvbS52bGx3cC5pbnB1dG1ldGhvZC5sYXRpbiJd
edit: forgot to mention, if you install this or any other input method you will first need to enable it in Settings>Language & keyboard>"keyboard"
just tick the box next to the keyboard and it will give you a prompt; read>OK
then say in messaging just press and hold on the text input field and select input method>select keyboard you want to use
also, when your keyboard disappears for whatever reason or doesn't show when needed you can press and hold the menu button for a few seconds to bring your keyboard up or make it go away.
I pulled off the screen protector and that seemed to fix it for me.
i've been having the exact same problem, it seems to occur mostly when my phone is charging or when it's too warm. Didn't bother sending it back though, but yes, it can be verry annoying when trying to text
Don't worry, its a standard Sony Ericsson issue. Usually occurs when the device overheats.
Reboot or look into ROM flashing and the problem will be resolved
Sent from my Xperia Play using xda premium
Mine does that when there's moisture on the screen, or when plugged into the charger. I've found typing to be much less annoying in wet conditions when using Swype.
Dry off your screen often enough and it should help. Removing the anti-shatter film (which is next to useless anyway) also makes a difference.
Sent from a parallel universe
Welcome to XDA!
Try solutions posted above.
If You ever need to test any piece of hardware on your phone, try accesing serice menu by typing this code in Dialler:
*#*#7378423#*#*
From there You can access Service tests menu and test Your Touch Screen/Earphone/Display just to mention a few.
Also screen protector isn't any good for me, standard keyboard is too small and stock firmware is to laggy to type messages. Solution is easy if You are ready to give your phone a boost by flashing it as mentioned by someone else above.
Wow, there is a great amount of different anwsers
I remember that someone on these forums said that Xplay has problems with multitouch regonizing (or something)
Basicly, the touch points wont reset unless you do something (i dont remember what)
Personaly, i just press powerbutto to "shut down" my screen, press main menu butto and open the lock, its all back to normal
EDIT: wait few seconds (like 5 or so) before you reopen the screen
i'm having a similiar problem, i charged my phone with 5v a couple times, so the last week, the touchscreen doesn't work. sometimes it does, it has been abit tricky. it like works sometimes, with an effort of constantly mashing the screen (with swipes and presses), but the last 24 hours, it's been practically dead. every other part of the phone works, like LED, pad controls, speaker, etc etc, just touchscreen is dead... any solution, methods?
Maison Looi said:
i'm having a similiar problem, i charged my phone with 5v a couple times, so the last week, the touchscreen doesn't work. sometimes it does, it has been abit tricky. it like works sometimes, with an effort of constantly mashing the screen (with swipes and presses), but the last 24 hours, it's been practically dead. every other part of the phone works, like LED, pad controls, speaker, etc etc, just touchscreen is dead... any solution, methods?
Click to expand...
Click to collapse
Broken digitizer maybe?
Sent from a parallel universe
captain67 said:
Broken digitizer maybe?
Sent from a parallel universe
Click to expand...
Click to collapse
how would one go about fixing this?
captain67 said:
Broken digitizer maybe?
Sent from a parallel universe
Click to expand...
Click to collapse
if so, replacement is easy right?
same time is, sometimes it's been working and sometimes not...
bigcez74 said:
how would one go about fixing this?
Click to expand...
Click to collapse
Honestly, I have no idea. I just know that the digitizer is what makes the touch screen work, and that there have been xda users buying them for replacement parts before.
Sent from Asgard
I have been getting this problem when coming in from outside. I can hold my finger about 1cm above the touchscreen and it will type random letters as well. Seems to be affected worse in bottom left hand corner for me. It settles back down after a while of being indoors. Its really weird though.
Sent from my R800i using Tapatalk
simacca said:
I have been getting this problem when coming in from outside. I can hold my finger about 1cm above the touchscreen and it will type random letters as well. Seems to be affected worse in bottom left hand corner for me. It settles back down after a while of being indoors. Its really weird though.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
That's because the difference in temperature and humidity causes condensation to gather on the screen, temporarily. Capacitive touch screens work by conducting electricity, and moisture is conductive.
Sent from Asgard
captain67 said:
That's because the difference in temperature and humidity causes condensation to gather on the screen, temporarily. Capacitive touch screens work by conducting electricity, and moisture is conductive.
Sent from Asgard
Click to expand...
Click to collapse
Ahh, I see. That makes sense. I took the factory installed screen protector today as well. I'm hoping this will help too.
Sent from my R800i using Tapatalk
A few weeks ago in las Vegas I noticed that my phones screen was not turning on after being out in the heat.
I rebooted etc etc but the real problem was just that the phone itself was awake and running, but pressing the power button would light up the capacitive buttons but no screen.
I could even swipe to open the phone and feel the vibration of it opening, answer calls by guessing and swiping etc.
The phone would be fine after it cooled down.
Now I'm back in a normal weather city and it's still happening.
Even just being in my pocket... It needs to be cooled down a little or no screen.
Doesn't seem like it matters but;
Cm7
No custom kernels at least not that I ever Installed
I only did the agps fix in terms of mods.
I guess I'm screwed since I'm over the year warranty. Any ideas?
Sent from my Incredible 2 using xda app-developers app
I should point out that in use the extended battery.
Sent from my Incredible 2 using xda app-developers app
Would really like some advice here. Moving to a new device is not ideal but if this is hardware what choice would I have as I'm out of warranty...
Sent from my Incredible 2 using xda app-developers app
Try flashing a different ROM, see if it happens in the bootloader or recovery... I'm thinking hardware issue, if those don't fix it then it definitely is.
prototype7 said:
Try flashing a different ROM, see if it happens in the bootloader or recovery... I'm thinking hardware issue, if those don't fix it then it definitely is.
Click to expand...
Click to collapse
thanks, i will try it.
I had the kang versiion of CM9 but it was a giant fail on my device. Maybe because I did not flash a new kernel, but regardless it just did not work well.
I may try and go stock, just to see what happens, and if I can stomach sense anymore.
Hardware issue!
I had this happen to a different phone of mine. The heat actually started to make the glue holding the screen and connectors in melt away, so the screen kept going in and out. The screen and touch digitilizer are different. You may still feel feedback but the screen just isnt powering on! Try opening your phone and looking inside to see if the connections are still nice and tight. Usually its like a ribbon cable sort of thing holding everything in place.
geekcentercreations said:
I had this happen to a different phone of mine. The heat actually started to make the glue holding the screen and connectors in melt away, so the screen kept going in and out. The screen and touch digitilizer are different. You may still feel feedback but the screen just isnt powering on! Try opening your phone and looking inside to see if the connections are still nice and tight. Usually its like a ribbon cable sort of thing holding everything in place.
Click to expand...
Click to collapse
Awesome! I installed paranoid android and aside from a few errors its been slightly better.
I think though that I will get a service manual somewhere online and take it apart and try and clean it out.
Most electronics I've owned in las Vegas have had overheating issues so I am not surpised this happened to the phone as well
Sent from my Incredible 2 using xda app-developers app
Hello,
2 weeks before I got water in my phone (xperia S), but now it's dried up. Everything's working properly but I'm facing a certain problem. A particular region/area of he screen doesn't respond to touch at all. Though there's no deformation in the display. Could you please help me out. I've tried a hard reset, rebooting, drying it up with a dryer, reinstalling the os and all. But still no good. I face many problems while choosing options like can't delete any messages. Even going to the landscape mode doesn't help. Please do help. :/
hmmmm
water damage, you may have to replace the screen
the part that got wet shorted out and now doesn't work
Sent from my LT26i using XDA Premium 4 mobile app
I have it, restart seems to fix that problem.
Sent from my LT26i using xda app-developers app
electrash said:
I have it, restart seems to fix that problem.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I tried rebooting several times. But no good. If the LCD's damaged then won't the display should also has been dispersed?
try to clean screen with alcohol or something for glass.
This sometimes occure when screen is dirty on some places, good clean may also fix that.
Im telling this from my experience.
If nothing helps, try to get it on warranty if you still have it.
eki_saurav said:
I tried rebooting several times. But no good. If the LCD's damaged then won't the display should also has been dispersed?
Click to expand...
Click to collapse
Never use drier on a wet phone as it might damage internal circuits. Water damage is something that is totally unpredictable. that part of screen might start working in a few days or a few hours or not at all ever. I'd suggest wait it out for a few days. If the problem doesn't get auto corrected,then you will have to take it for repairs(A water damaged phone's days are numbered though,no matter what you do)
Does the ok/cancel button show problem only? If you scroll wallpaper through that region, does it work?
Sent from my Xperia SL
entermetallica said:
Does the ok/cancel button show problem only? If you scroll wallpaper through that region, does it work?
Sent from my Xperia SL
Click to expand...
Click to collapse
Yes, that's the only problem. And, no it doesn't works if I tap on the region, it recognizes the tap on either above/ below area and acts accordingly.
Dark Wraith said:
Never use drier on a wet phone as it might damage internal circuits. Water damage is something that is totally unpredictable. that part of screen might start working in a few days or a few hours or not at all ever. I'd suggest wait it out for a few days. If the problem doesn't get auto corrected,then you will have to take it for repairs(A water damaged phone's days are numbered though,no matter what you do)
Click to expand...
Click to collapse
I didn't know that. It's been nearly a month still no good.
GT-N5110 wifi version. Ive had this device for 10 days. Out the box it was running 4.1.2 and seemed work great other than the occasional 3-5 seconds when screen would become unresponsive during normal use. After using it for a few days I decided to go ahead and update to 4.2.2 thinking maybe it would fix the screen issue. It did fix that issue but now im having another problem. After the device sits dormant for awhile the screen doesnt respond to touch but still works fine with the s pen. Ill turn it on after sitting all night and after swiping to unlock the screen it becomes unresponsive. I usually have to lock/unlock the screen several times before it will start responding. After it starts working I can be on it for hours with no more problems. But if I lock the screen an set it down for awhile when I go to use it again it does the samething. It seems like it has to warm up. I tried doing factory data reset but that didnt help. It is rooted also but the only thing ive done so far is get rid of some bloatware.(i didnt root it untill after the problem started). Anyone have any advice?
Do you have your note in a cover , and if so does it have a magnet.
Sent from my GT-N5110 using xda app-developers app
That does sound rather crazy, the unresponsiveness is out of the ordinary... did you try turning off a lot of the extra features built in by Samsung? another thing you could do is download Clean Master from the play store and take a look at your Ram use-age and clean out some cache files with it, this might help with the lag. The touch response could be hindered due to a case or screen protector... other than that the only thing i could think is if there was physical damage done to it before that could cause the touch screen to act that way.
Ummmm... I would have taken it back to the store and asked for a replacement.
That is not normal at all. even with the device's settings left alone, there should not be any issues with responses with touch.
Note... The pen feature is totally separate from touch. The screen has two different features, one being a digitizer for the pen function the other for touch. It is possible that during assembly that the connection for the touch screen is faulty, as a bad solder joint during wave process could make the connection heat related. As the device cools, the contacts contract causing a fault with touch operation. When heated up from normal use, expansion forces contact between connector and board for normal operation to function with touchscreen.
livis n fur said:
Do you have your note in a cover , and if so does it have a magnet.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Using another case without magnets fixed the problem for me
Sent from my HTCONE using Tapatalk
FrozenRiff said:
Using another case without magnets fixed the problem for me
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
The problem was my samsung book cover! Can't believe samsung would make a cover that causes these kinds of issues. Glad I only paid 7 bucks on ebay instead of 50 at best buy. Thanks guys for the comments!
TwanMan87 said:
The problem was my samsung book cover! Can't believe samsung would make a cover that causes these kinds of issues. Glad I only paid 7 bucks on ebay instead of 50 at best buy. Thanks guys for the comments!
Click to expand...
Click to collapse
Thanks for the FYI. I was using the moko whatever with a keyboard and I got the freezes all the time. I was thinking about the official Samsung one but if that gives you problems then forget it. I almost sold this thing on eBay cause I couldn't take the freezes anymore. Now I use a tpu case with it and couldn't be happier
Sent from my GT-N5110 using Tapatalk
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Its not hardware issue for sure. Try to unlock with 3 fingers i think i saw this solution somewhere in the forum.
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
ItsJacobee said:
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
Click to expand...
Click to collapse
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Well then I'd try to fix it before it does get unstable! Thing with the lock screen is you're swiping and the moisture defuses the area you're touching which could cause problems. Definitely try the rice! However, I wouldn't recommend gluing it yourself. I imagine it requires some sort of water and heat resistant glue to be effective, and on top of that a professional application. Hot glue definitely won't work! I imagine you want something that looks nice and I can only seeing that being messy and leaving residue. Furthermore, I'm not entirely sure on what lies beneath the screen and if disturbing that could cause further problems. However, I understand you're probably planning on it so please watch a guide such as: https://www.youtube.com/watch?v=PcoEQVtUwYQ to see how it's done and what you need. There seems to be a lot more to it than just placing some glue on the screen and pressing it back down.
I'm sure you can get a replacement kit with instructions and all the required tools to do it properly for not too steep of a price. Check this out: http://www.ebay.com/itm/Replacement...46?pt=LH_DefaultDomain_15&hash=item54198f441a
Or you could take it to a professional like those at Broke Ass Phone: http://www.brokeassphone.com/smartphone-repair-selection/lg-smartphone-repair/lg-g3/ The price is steep, but it's professionally done and comes with a warranty.
Good luck to you!
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
D855Lover said:
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
Click to expand...
Click to collapse
Is it under warranty or do you have insurance on the phone?
ItsJacobee said:
Is it under warranty or do you have insurance on the phone?
Click to expand...
Click to collapse
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
D855Lover said:
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
Click to expand...
Click to collapse
Restore Stock ROM AND do a full unroot beforehand.
ItsJacobee said:
Restore Stock ROM AND do a full unroot beforehand.
Click to expand...
Click to collapse
Thanks for reminding. I restored the phone to stock with the downloaded .TOT file, then go to service center.
I can't trigger the problem in front of the service guy, however, they ask me to left the phone for checking, one day later, they confirmed that my phone is working fine no need to do anything, nothing to be replaced.
CM12 is already good enough, its speed and battery friendly....
I wish developers of CM12 would somehow fix the problem in future updates, as I knew some D855 user (but not much) also having the same issue.
Best regards,
D855Lover.