Hello,
I have had my Kindle rooted fro quite some time but I didn't like it so I decided I would install the new ICS ROM that is out. However, this did not work so I tried to go back to the Kindle system using TWRP and the Kindle Update 6.3.1 from Amazon. Now, all I can see is the Kindle Fire logo for a few seconds then the screen goes black, with the backlight on. The light will stay on until the battery goes dead. Any suggestions?
Related
hey guys, i bought the fire for my wife for valentines day, immediately rooted it to get rid of that terrible kindle launcher and stuff, well, I've got a transformer prime and galaxy nexus, so after a couple months of her playing with my ics awesomeness she now wants to come over the good side, only t hing is, for the life of me i can't rememeber what i did as far as recover goes on this fire. I've read to hold the power button until it turns orange, but it won't do that for me. So how do i get into recovery with the kindle fire?
With your Kindle Fire off, hit the power button (and release it), and wait for the FireFireFire logo (triangular) to appear. Then, hit the power button until it turns from green to orange/red, and let go. You will then go into recovery.
first off, thank you very much for your reply.
When i pushed the power button (with the kindle off) it just went to a black screen with the word "kindle" in white and the word "fire" in orange. stayed there for about a minute or two then booted up. never a yellow triange.....any ideas?
vballrkc said:
When i pushed the power button (with the kindle off) it just went to a black screen with the word "kindle" in white and the word "fire" in orange. stayed there for about a minute or two then booted up. never a yellow triange.....any ideas?
Click to expand...
Click to collapse
Oops! Looks like you lost FireFireFire somewhere along the way. Probably because of the recent Kindle update, which also would have unrooted you, unfortunately. You will need to re-root (which will reload the FireFireFire boot loader).
The Kindle Fire Utility can root a 6.3 (OS) Kindle Fire. Not sure how you rooted last time. If you did not use KFU, the old procedure you used may not work any longer.
Ah. Ok. I was unaware you get iota updates after rooting. Thanks ill just start all over.
HI,
I just try to root my Kindle Fire 2nd gen using Kindle Fire Utiity 0.9.6 and all goes fine until stack on screen wait... and I wait for 15 min with black screen, green led. I decide probably stupid thing, disconnect from cable and try to restart it but its not restarting. Now it have black screen, no led its working, not charging (was fully charge before I start) not responsive at all. I try to hold reset for 15s, 30s, 60s and nothing not switch on. Did I permanently bricked?
Probably, as kindle fire utility is only for first gen
Sent from my DROIDX using XDA Free mobile app
see attached
Thanks. I found this in different forum and was sure it is for 2gen my fault, should came here first I open it, disconnect for few hours battery, reconnect and still dead. Nothing can be done to rescue?
My wife and I bought my father-in-law a Fire TV which worked fine for some time. Then he brought it to my house because it wasn't working any more. I don't know what he did, but all it does is hang at the initial boot screen (black screen, white Amazon logo). Amazon has sent us a replacement Fire TV, but they let me keep the brick. Is there any way to recover this Fire TV? I've read through some of the threads. Tried using a keyboard to enter recovery (didn't work). Haven't tried adb (I don't have a USB-A to USB-A cable).
Thanks!
same issue
i hadn't used my fire tv for a couple months but was working flawlessly the last time I did use it and now no matter what tv I try to connect it to or how many hdmi cables I tried I can't get my fire tv to boot past the initial boot screen of the white Amazon logo it don't make it to the fire tv logo or any other screen it's just a black screen and screens all say no signal. I had rooted it back before I stopped using it with towel root and had adb enabled but after I boot it and it goes past the Amazon logo to the black screen the logo the led on the box is white then starts blinking then turns an amber color and sorta pulses or blinks differently than the while led blinked. Any help would b much appreciated I have been searching all over several forums and websites for days and nobody seems like they r having this issue so I'm totally lost
Stuck on Amazon Logo right out of the box/new
ryanrickard85 said:
i hadn't used my fire tv for a couple months but was working flawlessly the last time I did use it and now no matter what tv I try to connect it to or how many hdmi cables I tried I can't get my fire tv to boot past the initial boot screen of the white Amazon logo it don't make it to the fire tv logo or any other screen it's just a black screen and screens all say no signal. I had rooted it back before I stopped using it with towel root and had adb enabled but after I boot it and it goes past the Amazon logo to the black screen the logo the led on the box is white then starts blinking then turns an amber color and sorta pulses or blinks differently than the while led blinked. Any help would b much appreciated I have been searching all over several forums and websites for days and nobody seems like they r having this issue so I'm totally lost
Click to expand...
Click to collapse
Hi, were you able to fix it, I have same issue, except mine did it right out of the box, brand new, first time plugging it in. any help will be appreciate it.
Mike Power
... it shows stock fire logo then blue fire 2 logo then powers off
all this happened wen it was around 50% charge, i was watching espn go and plugged in charger and it immediately powered off and has done the above since.. any ideas? thanks
Hello, I have a problem with my Amazon Fire Tv (Not stick)
My problem is when turn on my Amazon Fire Tv it shows me a white Amazon logo and the screen turns black, the remote doesn't work, I tried to use 2 different tvs but no luck, I tried going into recovery mode with a keyboard but leads me in to a dead end that says something like "Amazon Recovery System 3e, your Amazon Fire Tv will restart in a couple minutes and should return to normal operations, if it does not restart you may pull the power to force a restart." Also, the light on the box is pulsing white then sometimes turn to orange and back and forth. This is not rooted or have a custom boot menu, its mostly used for Kodi.
Thanks.
Thats exactly what mine does. No luck here yet love to find solution.
I am getting this same screen!
Still no luck with this issue ?