I was trying to change the startup/splash screens on my Samsung i760 with WM6. I found the file VerizonStartupAni.gif which is basicly an animated verizon logo that appears before the windows mobile splashscreen. I tried changing it to another animated gif but after some poking around its attributes are read only/hidden/system/in ROM. Using total Commander I tried to change these settings but they just reset right after. Is there anyway to disable the system from changing it back to default? I tried to replace it with the new file but keep getting the same write protected error, even if i name the new file with the same name. Perhaps there is a way to unlock the (in ROM) box. It appears in gray and doesn't allow me to alter it. Any help and suggestions would be awesome. Played around with it for 2 hours, even poked around regedit for anything useful with no luck. Maybe I missed something.
Try renaming the original file,
then copying the new file to the same location with the same name.
I made some custom animations and sounds that may work on your device. I configured them for the kaiser but the files should be in the same place.
Try the link in my signature and install the cab.
Ok my issue is this..I flashed my Voude to metro pcs, I used IAMCOKEMANS loader and the alltell rom, since then no matter what rom i use the Web setting or internet settings wont keep..at all it will reset the pass word right after i save the new one.. ive tried every thing and have spent a month trying it before i decided to ask for help.
what can i do about thi problem? there are plenty of people out there claiming that they got internet and mms working flawlessly but yet no one has posted how.. so its my opinion that no one has yet lol.. not if your using the same phone from sprint that i have..and when they list the proxy settins and web setting for metro to put onto the touch there all half ass.. they do not give a step by step on how they disabled the HTC_GAURDIAN files to be able to keep there settings, and 2 they they dont tell you how they over written the file..as some have claimed..
Ok HTC_GAURDIAN is not in the start up folder in NEW roms!!! it can not be disabled by any means i know.. and every kitchen ive used just doesnt seem to install properly or when i dl the files to build an os it wont find the syw or any thing..
So can any body out there please tell me the best rom to use with this phone (thats loaded ..lol the rom i have now is really nice) and a defiant way to get the internet working on this phone from print please on the metro net work.. thanks all and thanks for the support.. after it is done i will right a guide documenting how i get it done in detail.. thanks.
Lmao it has been done and i used to have cricket and i overworote the Guardian file easily...
First off its a hidden file so your not going to find it easily.
Second its not in the Start folder inside the windows folder, its inside the windows folder just chillin there
You need
1)Total Commader
2)A blank notepad file saved at HTC_GUARDIAN.exe
once you have that... input the guardian file to somewhere on your phone and insall total commander.
you will find 2 files in the windows folder usisn total com. that are called "htc_guardian.exe" and a shortcut to this file. you need to replace the HTC_Guardiand file with the one you made and that should solve your problem with the proxy and credentials messing up...
corpashe said:
Lmao it has been done and i used to have cricket and i overworote the Guardian file easily...
First off its a hidden file so your not going to find it easily.
Second its not in the Start folder inside the windows folder, its inside the windows folder just chillin there
You need
1)Total Commader
2)A blank notepad file saved at HTC_GUARDIAN.exe
once you have that... input the guardian file to somewhere on your phone and insall total commander.
you will find 2 files in the windows folder usisn total com. that are called "htc_guardian.exe" and a shortcut to this file. you need to replace the HTC_Guardiand file with the one you made and that should solve your problem with the proxy and credentials messing up...
Click to expand...
Click to collapse
Thank you for your reply.. ok i tried it and it is not working.. it says it can not be over written since it is part of the rom? i read some where that they disable it to being over written in the new 6.1 cn any one confirm this?
P.S. i found HTC_GUARDIAN.EXE AND HTC_GAURDIAN.ink???
Ok i got the file over written and i reset.. the problem now(wich leads me to belive that i didnt over write any thing ) is that if i create or modifie a connection no matter what pass word i put in (metropcs) I save it and i can reopen it and it goes right back to a 14-5 digit pass word and when i open a page in internet explorer it says page can not be opened due to a connection loss..any help on what the best rom would be and how to get the web working would be great!!!!! and i allso heard there is a new metropcs rom in the works or being checked out right now... CAN I BE A TESTER PLEASE!!!! thanks
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue
the .ink file is mising in my startup folder. What should i do? the .exe is still there
nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you
pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.
if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.
Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version
wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!
my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?
Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks
HEEy the same for me, pleas help us!
and microWlan doesn't work in any Roms i tested...
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.
There is a program called s5230sec for removing the security of s5230 star.It works on s5250 wave 525 too.Just start the program and press the only button.It is labeled in russian,but since it is the only button i think it is easy to run the program.Then close the program and start stune.You will see two more folders:
1.Security.In this folder are stored all the certificates.
2.In folder system there are a ot of interesting stuff.Some of the flash interface and fonts.
Chek this out please.
What exactly did s5230sec ?
I see blue progress bar, but it take so long...
Also I can not choose COM Port ?
Should it be autodetected?
I've tested with S8500 as I thought it is same feature like in QuB.
Best Regards
what do you mean by security? the "write protect"?? ill try this soon i got home
tried that tool
it doesn't do anything for the wave
yes it does what it says.. it show 2 hidden folders... and that system folder show the lock screen and other good stuff..but my phone is 525 maybe thats the case..
Hi All,
I finally got my GT 2 and managed to upload custom faces. Unfortunately the ones I did myself have all same size and seem to have wrong pics inside.*
Here’s the hwt File:
https://drive.google.com/open?id=1TTWkPNucHddQ25gOOSre-0ciAKXuwUIL
And here the source file.
https://drive.google.com/open?id=1awNsJqdUjiPKNupePLi60JLOSooBnApE
You’ll see that something went wrong when compiling.. but I have no clue, what..
Any help welcome
Januwar said:
Hi All,
I finally got my GT 2 and managed to upload custom faces. Unfortunately the ones I did myself have all same size and seem to have wrong pics inside.*
Here’s the hwt File:
https://drive.google.com/open?id=1TTWkPNucHddQ25gOOSre-0ciAKXuwUIL
And here the source file.
https://drive.google.com/open?id=1awNsJqdUjiPKNupePLi60JLOSooBnApE
You’ll see that something went wrong when compiling.. but I have no clue, what..
Any help welcome
Click to expand...
Click to collapse
Did you solve the problem ?
If you did not:
go to folder where you saved app, ---> huawei_watch_face_maker-win32-ia32_v066b\packager, delete Output folder and com.huawei.watchface file.
Also in root folder of app make Theme folder where you will save your work.
You should be good to go. Good luck.
Thank you for trying to help.
I'm getting a similar issue where the creation of the watch doesn't go through. Here is the result error :
" GuiPack1.4: The tool to generate gui.bin from png files
Please download guixx.bin to flash and copy BitmapMapping.cpp to project.
Working path is: C:\Users\Franþois\Desktop\Divers\huawei_watch_face_maker-win32-ia32_v075b\huawei_watch_face_maker-win32-ia32_v075b\packager\tools
find_all_files: count: 8 with: C:\Users\Franþois\Desktop\Divers\huawei_watch_face_maker-win32-ia32_v075b\huawei_watch_face_maker-win32-ia32_v075b\packager\tools\image\*.png
Zipping bitmap files:
0 1 2 3 4Error: convertPngtoBitmap for C:\Users\Franþois\Desktop\Divers\huawei_watch_face_maker-win32-ia32_v075b\huawei_watch_face_maker-win32-ia32_v075b\packager\tools\image\A100_006.png
Error: prepare_zip_files
Appuyez sur une touche pour continuer... (type any key to continue)"
The app still creates a file but when I upload it I get something that looks a bit like an old watch I tried to make (that worked but image sets were bit buggy).
Can someone help to understand ? For the record I tried re-extracting the full app, I tried deleting the files you talked about but nothing helps. I also tried launching the app as an admin.
See ya guys !
share your hfw file and not hwt. put in google drive and i try to solve.
Did you manage to fix this problem? I'm having the same one.
Hello, I have a problem:
when I transfer the watchface to the watch you only see the hands the image of the dial is black, I have procured in various ways and with various images but nothing to do, what am I wrong?
thank you
Hi
Great watchface maker. Previously used a similar one to create faces for Amazfit Bip so, after a wee refresher, I was able to create a nice face. Unfortunately, now that I've finished it, I can't get the damn thing to export to .hwt file, it's stuck on "wrapping up". I've been over it again and again and don't see any problems. Any ideas?
I've made sure not to have any "white spaces" or symbols in my program folder or target folder. I've even put both folders on root of C: drive and tried compatibilty mode and run in admin. I've even tried stripping out every widget except the background but I can't get it to compile the final file. Rage.
00NakedApe00 said:
Hi
Great watchface maker. Previously used a similar one to create faces for Amazfit Bip so, after a wee refresher, I was able to create a nice face. Unfortunately, now that I've finished it, I can't get the damn thing to export to .hwt file, it's stuck on "wrapping up". I've been over it again and again and don't see any problems. Any ideas?
I've made sure not to have any "white spaces" or symbols in my program folder or target folder. I've even put both folders on root of C: drive and tried compatibilty mode and run in admin. I've even tried stripping out every widget except the background but I can't get it to compile the final file. Rage.
Click to expand...
Click to collapse
update: Tried it out on my old mother's ancient win7 laptop and it worked first time! weird, cos my pc is a beast.
Now, the only problem I've got is a rotating arm (for a battery guage) that refuses to budge from the centre of the face. Is there a limit on rotation widgets? I've got a steps target guage and hour-and-minutes hands on a small analogue clock. Tried removing the widget and building it from scratch - still get the same result.