There is a program called s5230sec for removing the security of s5230 star.It works on s5250 wave 525 too.Just start the program and press the only button.It is labeled in russian,but since it is the only button i think it is easy to run the program.Then close the program and start stune.You will see two more folders:
1.Security.In this folder are stored all the certificates.
2.In folder system there are a ot of interesting stuff.Some of the flash interface and fonts.
Chek this out please.
What exactly did s5230sec ?
I see blue progress bar, but it take so long...
Also I can not choose COM Port ?
Should it be autodetected?
I've tested with S8500 as I thought it is same feature like in QuB.
Best Regards
what do you mean by security? the "write protect"?? ill try this soon i got home
tried that tool
it doesn't do anything for the wave
yes it does what it says.. it show 2 hidden folders... and that system folder show the lock screen and other good stuff..but my phone is 525 maybe thats the case..
Related
I just purchased the US AT&T Samsung i907 (US i780).
The keyboard sucks. Press and Hold = repeat; not ALT CHAR. Also the keyboard can only accept 1 key input at a time.
With No physical Dpad, the keyboard needs to be fully working.
The keyboard is the same as the i617, but they use different drivers.
i617 = \windows\keypad.dll
i907 = \windows\zylonite_keypad_Us.dll
I've tried grabbing this file off of my friends i617, but copying the file would produce an error or a 0kb file. Using a USB Cable and Activesync wouldn't even show it when browsing files.
I have all the required registry keys that I need... but I'm looking for this "keypad.dll" from a Blackjack II. I've downloaded a few ROM dumps from WM6 and WM6.1 but all I get are RAW files, which I'm assuming are from a Kitchen.
Without getting too involved in Blackjack II Rom and Kitchen setup, does anyone have access to this file they can upload or have a method for me to extract this file myself?
some remote registry editors show the "real contents" of the phone... you may be able dump that way
just out of curiosity sake.... what kind of a drive do windows pick up the mobile device..... you might be able to right a batch file or use ms dos commands (copy function) to dump things...... i dunno, food for thought.....
edit: you can also try mtty or putty
anyone with any other more definitive answers? I'll be the first to admit I have no idea what I'm doing.
I have the RAW ROM Dump files, but I'm assuming you have to be some sort of magical wizard to open them or have a Kitchen.
Any wizards out there have a kitchen they can shoot me a link to an uploaded blackjack 2 keypad.dll?
Bump
Hey, I'm sorry to inform that i cannot help you with this, but if you made any progress, I'd very much like to know how you did it. I need a new driver for the same reasons as you. Looking for a BJ2 keypad driver and with that a scandinavian layout config.
I'm also very interested!!
@player911
Please!! Dont give up! I would like to help. but i have no idea how.
I hope you made a little progress in that problem.
Good luck and keep up you good work in improving the i907/US i780.
I'll upload if I can off of my BJII. I am thinking of getting the Epix, so this will help me a lot.
Will update soon.
I have the same problem in I600
The relationship is still in OEMMITS.
It has a great relationship.
How would I go about to extract this .dll?
Write to the exact.
and from which the device, you toss it
How to update keypad.dll
My actually driver don't work
Relase topic........
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
~~Tito~~ said:
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
Click to expand...
Click to collapse
Do You need keypad.dll from i617?
Yes ! Do you have it?
~~Tito~~ said:
Yes ! Do you have it?
Click to expand...
Click to collapse
Yup.. here You go.
Thanks a bunch! Now to test on my machine ! Backing up right now, and I am about to replace the file when its done. I renamed the keypad.dll to zylonite_keypad_Us.dll, just to see what will happen with out any mods to the file.
EDIT:Ok, here's what happened.
The mouse movement works, but any button presses, keyboard presses do not work. Nothing works except the optical mouse, but it has no click function. Some one has to edit the file to be compatible with the i907/i780. The backlight didn't work either. I got it back to normal, I just deleted the file then soft reseted and the keypad was working again.
EDIT 2:
I opened the DLL in word pad, and there is a lot of things linked to the middle scroll wheel and the 4 way navigation it has. Some one might have to copy some things for the top functions, like the left and right soft keys, the call and end button, the ok and start menu button, and the click of the optical mouse. The remove the functions of the Blackjack 2 like the home button and such.
EDIT 3: Can someone provide the zylonite_keypad_Us.dll for me?
I have the same problem on my i600
Hallo
i found this: http://forum.xda-developers.com/showthread.php?t=486712
With this program you can assign anny program to the "software" startbutton.
I mapped YotaCenter to start button and would say its far better than the new windows startmenu and the new htc start menu.
It has several advantages. YotaCenter enables you to place favorite apps in an easy way and brings a taskmanager.
Also other program launchers are better than the windows/htc one - so give this startbutton app a try
I want to do this could you tell me what I have to do as that thread is a bit confusing for a nooby?
Thanks
thanks!!!
hI MARKUSSIEBERT!! Thank you for your great app. I am happy finally! Thanks
has anyone got this working on dutty 2.3?
Yes - im using it with dutty 2.3 even if it seems that there are some unexpected behavios.
Unexpected behaviors are:
-sometimes (ever 15 - 20th touch) the original startmenu appears, but its ok
-a second click on "Start" doesnt close the launcher window (because it only launches)
How to use it:
1. install the cab
2. open any registry editor
3. goto HKCU\software\allelimo\StartButton\Run
4. change the value to what you want to start
If you want to launch:
\Program Files\MyApplicationFolder\MyApplication.exe
you have to insert:
MyApplicationFolder\MyApplication.exe
if you want to start an application that is not on the Program Files folder, you can write the full path instead:
\Memory Card\Program Files\MyApplicationFolder\MyApplication.exe
How to extend the hook to the "Start" text?
HKCU\software\allelimo\StartButton\HookText
Set this value to 1 for hooking the word "Start"
Delete the key for hooking only the Start button
yeah, i could get it to work from the memory card, but i reinstalled yota onto the phone and i got it working..
as you said clicking start doesnt close it,
one more (i dont know if it is limited to dutty 2.3) if you click to the right of the start text the normal start menu will come up, every time..
you have to diasble the new htc startmenu first,
To enable "old" LargeMenu (Disable new manila start menu):
HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu\Enable ManilaStartMenu =dword:00000000
then configure this tool...works for me
Hi Guys & Gals,
Quick question.....
Has anybody come across a Wake On Lan app for WM6. I have a small home network that I start up from a central PC using Wake On LAN function in the system BIOS. I would like to be able to start my PC's from the Blackstone over my WLAN.
Everything within the LAN & WLAN is running reserved DHCP from the router side so all IP's are constant including the Blackstone.
Cheers for any replies.........
Gilgamesh.......
I don't know if any solution exists but I've read a tutorial (in french sorry) on how to make a wake on line application for wm
http://blogs.msdn.com/pierreca/archive/2009/03/19/wake-on-lan-depuis-votre-t-l-phone.aspx
Hope that could help you
Try this..
jpl69 cheers.........The app works like a charm but is a little basic. Needs the full MAC to be entered manually each time.
What would be really nice is some way of associating the MAC to a short meaningful name that could then be listed so it could just be selected from a list rather than enter the full MAC each time. In this way multiple PC's coud be listed.
While we're at it would also be nice to have a standby button as well so PC's within the LAN could be started and shut down form the app.
I've never written an app before and would either like a few pointers to see if I could do it or see if anyone out there would consider building on the app already posted.
Any suggestion welcome.......
Besides developing an app to that (no time) i could sugest make several shortcuts using resco and parsing the mac as parameter. At least you only had to make it once.
Thanks jpl69 for your continued replies...much appreciated.
I have seen Resco but not realy sure which component to download to edit the exe. I have used PEG (parsing) in other apps at work but just need something to get me started on WM6. I could the replicate the exe per MAC and create a single file or each PC
Might be worth looking at vxUtil: http://www.cambridgevx.com.
This has Wake-On-LAN (among other things), and I think it remembers previously entered values. You can't give things memorable names but it might help.
Gilgamesh1066 said:
Thanks jpl69 for your continued replies...much appreciated.
I have seen Resco but not realy sure which component to download to edit the exe. I have used PEG (parsing) in other apps at work but just need something to get me started on WM6. I could the replicate the exe per MAC and create a single file or each PC
Click to expand...
Click to collapse
i think he means, like, create new shortcut with parameters. Just for example the same as on pc creating a shortcut to c:\quake\quake.exe and use the string "c:\quake\quake.exe" +bind mouse1 shoot +set mode opengl blablabla
Again thanks for the continued replies.....
Downloaded vxUtil and had a play and it does have a working WOL option but again it's messy and not really the simple solution I was looking for. It does have some other features (ping/sweep, tracert & DNS lookup) but I don't really have a use for these.
Still really after a single icon to start each PC as per the shortcut suggestion above.
All suggestions still welcome and appreciated.
I will just try to clarify what was the idea of jpl69.
Please read the README file included in the attached archive (posted by jpl69).
It says:
"Command Line:
===============
Please use as following:
WakeOnLan.exe [MACAddress]
MacAddress can be either 01E4523AEE22 or 01:E4:52:3A:EE:22 "
Now with Resco Explorer (or with Total Commander, which is freeware) one can make several different shortcuts to WakeOnLan.exe, each ending with the specific MAC.
In Total Commander, after creating the shortcut, one must select it, choose "properties", then "shortcut" tab, then manually add the MAC at the end of the "target" line.
Copy the ready shortcut several times, name the new copies whatever you want and place those shortcuts in a folder. Dont forget to change the MAC for each machine.
Hope it helps.
Now I get it......Sorry for the slow uptake but been a busy boy and head has been fried by other things. Will have a play tomorrow and post back results.
Many thanks..........
I dont know if you still looking to do this but I got this working & figured I would reply here for future reference.
First i have a linksys DD-WRT router, so I followed these steps:
http://www.dd-wrt.com/wiki/index.php/WOL
Then I downloaded the attached cab & its one click & works great!
RichTJ99 said:
I dont know if you still looking to do this but I got this working & figured I would reply here for future reference.
First i have a linksys DD-WRT router, so I followed these steps:
http://www.dd-wrt.com/wiki/index.php/WOL
Then I downloaded the attached cab & its one click & works great!
Click to expand...
Click to collapse
I have been using the WakeOnPocketPC from Depicus happilly with WM 6.1. Now, after upgrade to WM 6.5 (Dutty ROM Leo Holy Grail), the cab fails to install ("...installation was unsuccessful.")
Any other program with capability to send WOL packets to a particular IP address (and not just broadcast over LAN)?
Although this thread is about one year old, before I developed my WoL everywhere program, I searched for programs like mine here and came to this thread... None of the programs I've found fit my requirements, so I made a program myself...
So I hope your search is over and you've found what you need with my little WoL everywhere... you can download it here:
http://forum.xda-developers.com/showthread.php?t=695524
Greetings @ all!
LichtiMC
Create a shortcut to WakeOnLan with a MAC address
Hi,
I'm pasting to this old thread since I found the WakeOnLan tool here and want to share my tips with others.
If you want to create a shortcut so that you have a separate executable (say in your Start Menu) then follow these steps:
Install WakeOnLan from the above link. I put it in "\Program Files\WakeOnLan\WakeOnLan.exe"
Browse to this location with explorer on your PPC. Select the WakeOnLan executable and click "copy"
Browse to where you want the shortcut to appear:
"\Windows\Start Menu" will show in your start menu
"\Windows\Startup" will be run when you reset or power cycle the device
"\Windows\Programs" will apear in your Start Menu > Programs folder
"\Windows\Settings" will appear in your system settings
Select on some empty space (not an existing file) in your chosen folder and choose "Paste shortcut"
Use a text editor on Windows / Linux to edit this new file, or one on your device (I didn't have any that would open on my device so I copied it to Linux, edited in emacs, then copied it back)
Edit the line that looks like:
Code:
40#"\Program Files\WakeOnLan\WakeOnLan.exe"
essentially this is a character count, a "#", the location the shortcut points to, and arguments. Add your MAC address like this and take note of the quotes:
Code:
58#"\Program Files\WakeOnLan\WakeOnLan.exe" AA:BB:CC:DD:EE:FF
count the characters of the shortcut, mac address, and space, then add one. This is your new number (in my case, 58).
An easy way to do this is to use "wc" on Linux:
Code:
echo "\Program Files\WakeOnLan\WakeOnLan.exe AA:BB:CC:DD:EE:FF" | wc -c
57
(remember to add 1!)
Now you can repeat the process and paste as many different WoL shortcuts as you like! I've made just one and called it "WoL MythTv" to wake up my media centre at home. Neat
I'll post my sources in the next post since new users aren't allowed to post links...
Hi, anyone knows a way to how to remove AT&T "global phone" orange splash screen without flashing the phone (Samsung focus)?
thanks and happy new year!
Just a matter of time till' someone figures it out...
Any update to this?
http://forum.xda-developers.com/showthread.php?t=1005549
Im not sure if this works on samsung focus (or under Mango) ,but Im gonna try it , the method works great for replacing alert tones , so I cant imagine why it wouldnt work for the image as well!
I might add , you dont need to follow those intruction , just open heathcliffs root explorer (you need to be dev unlocked ) , go to the windows folder , copy your picture and put it in my documents, (you have to email it to yourself ,open in phone and save,it will go to the wallpeper folder,for there make a copy) once the windows folder is open and stops loading , hit paste , it will say its gonna overwrite the original , let it ,then get out of there restart your phone and it should be there .
***** as with everything on this site , its use at your own risk*****
Vintage144 said:
http://forum.xda-developers.com/showthread.php?t=1005549
Im not sure if this works on samsung focus (or under Mango) ,but Im gonna try it , the method works great for replacing alert tones , so I cant imagine why it wouldnt work for the image as well!
I might add , you dont need to follow those intruction , just open heathcliffs root explorer (you need to be dev unlocked ) , go to the windows folder , copy your picture and put it in my documents, (you have to email it to yourself ,open in phone and save,it will go to the wallpeper folder,for there make a copy) once the windows folder is open and stops loading , hit paste , it will say its gonna overwrite the original , let it ,then get out of there restart your phone and it should be there .
***** as with everything on this site , its use at your own risk*****
Click to expand...
Click to collapse
does not work
can not delete/rename/overwrite the "mologo" file in the "wallpapers" folder ..can not do it on samsung focus using wp7 root tools
other file explorer apps do not see the wallpaper folder
does anyone know the registry value for the splash screen?
its in the rom then and theres no way to change it!
Vintage144 said:
its in the rom then and theres no way to change it!
Click to expand...
Click to collapse
i was thinking to drop another file in "windows" then point the registry to it since we can not replace or rename the original
Thread Closed
No questions in the development section please! Use the read before posting sticky for guidelines.
Take it easy
O_G
The last view days I spent many hours to get android installed on my HTC Touch Pro 2 Windows phone (RHOD100). This is what I did so far:
1) Buy a new micro SD cart
2) Format the cart to a standard FAT32 using SDFormatter V2.0
3) Download the "FRX06_Full_Bundle_25.3.2011" from your forum
4) Insert the SD cart in my phone and start the HARET.exe
Until so far no problem... but.....
Next I should calibrate my screen, but I can't see when and I don't see the squares for the screen calibration. After some waiting I touched (without seeing the boxes) the left top, right top, centre, left bottom and right bottom of my screen. The startup continues and I see after some waiting the android screensaver and some later the locked "desktop" So far with hiccups I managed.
But:
I cannot get called (the phone is not working), the touch screen does not work properly. So I try to restart the entire phone to start from scratch (so delete all files from SD card, format it again and copy the original files on it.
To my surprise I cannot start the HARET.exe application from my windows mobile environment I get the message:
The file HARET cannot be opened. It is not signed with a trusted certificate ....."
From another topic (http://forum.xda-developers.com/show...17&postcount=5) I found that some registry setting was not correct so I downloaded the CERegEditor 0.0.5.2 application and I tried to change the REG_DWORD to 1 in HKEY_LOCAL_MACHINE\Security\Policies\Policies.
However trying to change that value I continuously get access denied also when I used the build in tool Unlock registry.... And yes my phone is attached. On another forum I found I have to download the Windows Mobile Developer Power Toys which I did and did not help.
So I cannot start HARET and I don't know how to proceed....
Can anyone help me? (And I'm sorry for my long story)
Hello !!
Isn't there anyone who can help me with this?????
Please?!
It's better if you post this in the android touch pro 2 section.