I can't seem to figure out how to update my prl.... I have deck's 1.3b and in all of the setting I can not find anyplace to update it. If there a new prl file I can just download and install? Thanks for any help!!!
Kyle
dayusmc said:
I can't seem to figure out how to update my prl.... I have deck's 1.3b and in all of the setting I can not find anyplace to update it. If there a new prl file I can just download and install? Thanks for any help!!!
Kyle
Click to expand...
Click to collapse
You need to be on a Sense ROM. I never ran Decks, but isn't that AOSP?
I think it is AOSP rom.... I was hoping for a file or something to download to update it...
Ok you need to flash to a sense rom 1st, I recommend mikg 3.11, Then update your profile and prl, I would also recommend doing a gps clear ##gpsclrx# in the dialer, use your msl code, commit. reprovision your phone in the dialer, ##data# enter your msl code go to profile, menu, reset and itll restart your phone. if it doesnt restart do it yourself. and let it run the hands free activation
Now what you need to do is download decks reloaded .44 from the dev section in here and install that instead of deck 1.b Its the best aosp rom period. Its a fully enhanced version of decks! Follow all the instructions in the OP and you should be set!
get the msl reader off the market for your msl code
twiztidvandal417 said:
Ok you need to flash to a sense rom 1st, I recommend mikg 3.11, Then update your profile and prl, I would also recommend doing a gps clear ##gpsclrx# in the dialer, use your msl code, commit. reprovision your phone in the dialer, ##data# enter your msl code go to profile, menu, reset and itll restart your phone. if it doesnt restart do it yourself. and let it run the hands free activation
Now what you need to do is download decks reloaded .44 from the dev section in here and install that instead of deck 1.b Its the best aosp rom period. Its a fully enhanced version of decks! Follow all the instructions in the OP and you should be set!
get the msl reader off the market for your msl code
Click to expand...
Click to collapse
Thanks for the detailed info. Question, would I be better of just putting a sense rom back on and staying with it so that I can easily get the updates. I live in NJ and I am not really getting very good reception anymore. I was told to update my prl list every month and that would help. Is the ASOP Rom better then the sense or just preference? Thanks again for all the info!
Kyle
twiztidvandal417 said:
Ok you need to flash to a sense rom 1st, I recommend mikg 3.11, Then update your profile and prl, I would also recommend doing a gps clear ##gpsclrx# in the dialer, use your msl code, commit. reprovision your phone in the dialer, ##data# enter your msl code go to profile, menu, reset and itll restart your phone. if it doesnt restart do it yourself. and let it run the hands free activation
Now what you need to do is download decks reloaded .44 from the dev section in here and install that instead of deck 1.b Its the best aosp rom period. Its a fully enhanced version of decks! Follow all the instructions in the OP and you should be set!
get the msl reader off the market for your msl code
Click to expand...
Click to collapse
OK, So far so good. I installed mikg 3.11, I updated the prl and profile. I was unsure of "doing a gps clear ##gpsclrx# in the dialer, use your msl code, commit" Do I just do ##4772579# for the ##gpsclrx# and ##3282# for the ##data# ? Please forgive the ignorance, I just don't want to mess it up and thank you again!!
OK, I figured I would just give it a try, I did the ##gpsclrx# thing, that worked, then I installed decks reloaded... but the phone icon doesn't work and there is know accounts tab...
What was your wipe process? I usually wipe everything x3 through amon ra. Maybe try rewiping and reinstalling. And make sure your installing decks reloaded .44 rls
Sent from my PC36100 using Tapatalk 2
I believe aosp vs sense is just preference they both do the same thing just in different ways. I love aosp for its simplicity. Sense kinda just works depending on which from tor using
Sent from my PC36100 using Tapatalk 2
dayusmc said:
OK, I figured I would just give it a try, I did the ##gpsclrx# thing, that worked, then I installed decks reloaded... but the phone icon doesn't work and there is know accounts tab...
Click to expand...
Click to collapse
Did you forget to flash gapps?
Sent from my PC36100 using xda premium
So I wipe everything 3 times like you said, and redid it. Worked like a charm!
I did run gapps and it still worked (deck reloaded) and it still worked. I did restore my apps from TI backup, so maybe that is why I didn't have to run gapps...
I have to say, I think I like mikg 3.11 better then the deck reloaded. It seems to get better reception, the bluetooth defiantly connects way faster to my truck and seems to just work great.
On another note... I have sprint, service doesn't seem to be that great by my house. I go from 4 bars to none inside my house and always drop calls and my wife has the same issues. My friend has T Mobile & Verizon and he said he gets great service everywhere with his T Mobile phone, even where his Verizon phone doesn't get any service. He also said that the internet speed is WAY faster..
So he let me borrow his T Mobile (Samsung Blase) So far coverage has been way better then Sprint!!! I think I might switch over to T Mobile. I am looking at the phones, The Blase is Gingerbread 2.3, and I really like the smaller phone. But the samsung galaxy s3 is coming out and has Ice Cream Sandwich on it, but it is a little big for me...
Is Ice Cream Sandwich a lot better then Gingerbread 2.3?
Thanks for everyone's help!!
Kyle
I believe ics is alot better the gingerbread, the newer phones are being built with ics in mind. I'm personally getting the sg3 when my upgrade is up in November
Sent from my PC36100 using Tapatalk 2
Related
I read somewhere that said only the sense roms can allow access to the EPST menu, but each one I have tried has failed so far. Anyone know if there is a ROM out there that lets me dial ##778 to get to the menu?
Try a stock sense 1 ROM like stock plus or mcsense or gingerstock.
Were you trying sense 3.5 roms? Afaik they don't support epst properly.
Sent from my Galaxy Nexus using Tapatalk
tiny4579 said:
Try a stock sense 1 ROM like stock plus or mcsense or gingerstock.
Were you trying sense 3.5 roms? Afaik they don't support epst properly.
Click to expand...
Click to collapse
Yes, it was Sense 3.5. I also tried the gingerstock rom and it didn't work either. I'll try and find a stock sense 1 ROM. I hear the Mcsense is pretty good. Thanks for the help.
Foots said:
Yes, it was Sense 3.5. I also tried the gingerstock rom and it didn't work either. I'll try and find a stock sense 1 ROM. I hear the Mcsense is pretty good. Thanks for the help.
Click to expand...
Click to collapse
Try Wildstangs ota 4.08.605.2 base rom, Jermaines Stock+ rom or my Touch Of Blue rom, EPST works on all of them.
Foots said:
Yes, it was Sense 3.5. I also tried the gingerstock rom and it didn't work either. I'll try and find a stock sense 1 ROM. I hear the Mcsense is pretty good. Thanks for the help.
Click to expand...
Click to collapse
I'm using the McSense rom but it doesn't seem to work for me. Am I doing something wrong? ##778 then press the call button, brings up my contacts? Strange..
ckuke4 said:
I'm using the McSense rom but it doesn't seem to work for me. Am I doing something wrong? ##778 then press the call button, brings up my contacts? Strange..
Click to expand...
Click to collapse
That should be it. Try adding a pound to the end (##778#). I know some roms also use ##data#, *#*#program#*#*, or *#*#data#*#*
this never worked for me!
cmlusco said:
Try Wildstangs ota 4.08.605.2 base rom, Jermaines Stock+ rom or my Touch Of Blue rom, EPST works on all of them.
Click to expand...
Click to collapse
I'm gonna try the Touch of Blue next. The others didn't seem to work. Each time I hit ##778/send, it would just do nothing. It acts like it wants to open EPST, but never does.
Sent from my ADR6300 using XDA
ckuke4 said:
I'm using the McSense rom but it doesn't seem to work for me. Am I doing something wrong? ##778 then press the call button, brings up my contacts? Strange..
Click to expand...
Click to collapse
Same here. I've tried every Sense ROM with no success, even the Touch of Blue, which us a beautiful ROM BTW. When I dial #778 and hit send, it acts like its trying to open the menu, but nothing comes up. Also, nothing responds on the screen until I hit the back button.
Foots said:
Same here. I've tried every Sense ROM with no success, even the Touch of Blue, which us a beautiful ROM BTW. When I dial #778 and hit send, it acts like its trying to open the menu, but nothing comes up. Also, nothing responds on the screen until I hit the back button.
Click to expand...
Click to collapse
Very weird, i am running my rom TOB and can access it with no issues. I have always been able to access it except on a few ported roms. Im not sure what would be the difference. Same rom same phone, the only difference is whats on our emmc and sdcard, and that shouldt make a bit of difference. Mabey htc changed something in the phones along the way, causing some people to have different results than others. Only other thing i could think of is screen type, i have amoled, but that shouldnt make a difference either.
Also i noticed you said #778 it should be ##778# hit dial, may have just been a typo on your part.
Do you think maybe its because I'm using a different SD card?
Sent from my ADR6300 using XDA
Foots said:
Do you think maybe its because I'm using a different SD card?
Sent from my ADR6300 using XDA
Click to expand...
Click to collapse
Shouldnt matter, as far as i know epst does not use the sdcard.
If you really need to access those settings, you could always use QPST on your pc.
cmlusco said:
Shouldnt matter, as far as i know epst does not use the sdcard.
If you really need to access those settings, you could always use QPST on your pc.
Click to expand...
Click to collapse
Maybe I'll get it figured out. Its weird because when I was on stock GB before I rooted I could access EPST, but since rooting I can't access it unless I restore my original rom.
Sent from my ADR6300 using XDA
I still cannot figure out why EPST isn't working with any rom I flash. I actually started using the Nils Business Sense 3.5 and when I dial ##778#, it says initializing, but never opens EPST. That's more then the Sense 1.0 roms have done for me.
no epst
Same here . was stock 2.3.4 and did root s-off did nandroid of stock and flashed sense + .. now no epst on anything .. restored recovery and its doing the same thing ##778# and just locks the screen up . I have to hit the back key to unfreeze it . ##diag# does work however .. ( i wish some one could figure this out i need epst . My MiP profile keeps changing from 1 to 0 on every boot and i lose 3g 1x . Could it be something different on the phones that see a working epst like the radio or s on or hboot ver ? mine is 0.92 s-off with the newest ota radio
Synergy ROM's EPST works perfect. Use ##778#.
Thanks..found my dream rom. has Everything cm does plus its 100% sense. love it and. now it on Vmobile. epst works ..skyraider 4.0 ++ . rom is not availible here though.thru the developers site only.
Sent from my ADR6300 using XDA Premium App
i flashed the .000001 prl and i lost service using dfs tool. i saved my original but i guess there was an error while saving. I was trying to revert back to original so i flashed the stock rom again and it didnt do anything i figured it has nothing to do with the rom. could someone help.
p.s i tried flashing different prls and when i go to about phone and status it still says 1
asheikh90 said:
i flashed the .000001 prl and i lost service using dfs tool. i saved my original but i guess there was an error while saving. I was trying to revert back to original so i flashed the stock rom again and it didnt do anything i figured it has nothing to do with the rom. could someone help.
p.s i tried flashing different prls and when i go to about phone and status it still says 1
Click to expand...
Click to collapse
anyonee?
i reverted to stock rom and ran the prl updater and its still not working.
Download a new prl (25006) and rename it to TEST.prl and place it on the root of your sd card. Then go into dialer (be on a touchwiz rom) and dial ##3282#, go to view, then prl write. It'll load the test.prl and reboot. Should be fixed then.
asheikh90 said:
anyonee?
i reverted to stock rom and ran the prl updater and its still not working.
Click to expand...
Click to collapse
Flash the attached one and it will get u back on sprint. update the prl in the settings once ur done flashing my attached one.
00001 is a hacked verizon one which is why you cant use the menu to update. If ur going to use a hacked one use 01337 it works best. 00001 is outdated. the ##3282# method only seems to work when it wants to i dont reccomend it especially for these hacked prls it doesn't seem to like them
thank you for the replies trying it now
i tried both options and neither of them worked its still saying PRL version 1 in the phone status
check ur pm
[/QUOTE]h90;30640439]i tried both options and neither of them worked its still saying PRL version 1 in the phone status[/QUOTE] check ur pm
http://cdmagurus.com/prls/Sprint pick a prl. Anyone should work
i dont know why after flashing the first time it never let me flash again.
Ascertion said:
Download a new prl (25006) and rename it to TEST.prl and place it on the root of your sd card. Then go into dialer (be on a touchwiz rom) and dial ##3282#, go to view, then prl write. It'll load the test.prl and reboot. Should be fixed then.
Click to expand...
Click to collapse
Just for the record I was having the hardest time getting this method to work at all not realizing the the prl's I had downloaded had to be extracted first maybe its a nood mistake but never the less havent had a problem sense and also data has to be off for this to work or at least it did for me. Hope this helps
asheikh90 said:
i flashed the .000001 prl and i lost service using dfs tool. i saved my original but i guess there was an error while saving. I was trying to revert back to original so i flashed the stock rom again and it didnt do anything i figured it has nothing to do with the rom. could someone help.
p.s i tried flashing different prls and when i go to about phone and status it still says 1
Click to expand...
Click to collapse
do a hands free activation. if it fails try again. sometimes it takes a few tries for it to stick
nicholaaaas said:
do a hands free activation. if it fails try again. sometimes it takes a few tries for it to stick
Click to expand...
Click to collapse
It'll fail because his prl is Verizon only.
Noo I had 0001 working flawlessly for awhile when I was testing it and then I updated to 4.3 and never could get any pre to work except what sprint sends to my phone 2011 and it sucks but I will say 0001 was working for me days ago wish it still would but people seem to be being tight lipped about it soo I'll leave it at that I've posted my problem and no one wants to say anything
fix prl
ackaite said:
Noo I had 0001 working flawlessly for awhile when I was testing it and then I updated to 4.3 and never could get any pre to work except what sprint sends to my phone 2011 and it sucks but I will say 0001 was working for me days ago wish it still would but people seem to be being tight lipped about it soo I'll leave it at that I've posted my problem and no one wants to say anything
Click to expand...
Click to collapse
put the options under mobile network to cdma then write your prl or try cdma/lte then try to write it again that could do it another option is to use hidden menu app then choose efs sync i cant remember where it is exactly another way is to do ##786# hit reset then enter your msl
Hello Everyone,
I just bought a HTC EVO 4G flashed to MetroPCS, I tried to activate last night by calling Metro. They did move my number over but they said I needed to manually activate the phone. However, all codes given to me by them DO NOT work to get to the settings to change my phone number or my MIN. Here is what I got and what I have used so far:
ROM MetrogenMod_Update_4.5
I have used
##000000#
##3242#
##3424#
I also tried flashing back to stock but same issue. I have looked in forums for over 5 hours and I hope someone can help me out.
Thank you!
Well I'm not sure about your rom, but those codes only work on a stock sense based rom.
It can be an updated rom, but its only sense!
If your phone was "flashed" to another carrier, then you could always flash another sense rooted rom and use the codes then.
When you flash a phone, its on a different partition. You can't break the flash settings by changing your rom.
The only thing you will have to end up changing is for mms and your voicemail number.
Sent from my PC36100 using Tapatalk 2
The problem you are having is related to the fact that the part of the dialer you need in order to reach these menus is no longer present in the newest over the air updates for the phone. Most ROMS also exclude this part of the dialer as well. The one ROM that I have used in the past to access these menus is swagged out stock.
This became an issue for me when I started trying to change PRL versions and force roam etc. Try the new ROM and see if that fixes it for you.
---------- Post added at 10:37 PM ---------- Previous post was at 10:33 PM ----------
http://forum.xda-developers.com/showthread.php?t=696073
Above link describes the feature that is missing from the versions of the ROMs you are using to attempt the switch.
I was able to access the ##DATA# after flashing to an earlier stock ROM. Thank you so much for the help. I had to extract the MSL to use the code. However, I am still trying to figure out how to change the phone number in the programming. The ##000000# still not works, but I guess it would have to be a thing of research and figuring it out.
victor__rojas said:
I was able to access the ##DATA# after flashing to an earlier stock ROM. Thank you so much for the help. I had to extract the MSL to use the code. However, I am still trying to figure out how to change the phone number in the programming. The ##000000# still not works, but I guess it would have to be a thing of research and figuring it out.
Click to expand...
Click to collapse
Press ##123456# but replace 123456 with your MSL, that will bring up the change number screen and next is the MSID screen, once you hit ok the phone will shut off and attempt to OTA activate when it reboots, at least that what happens on stock rom. If the EPST codes worked for ##data# for you then I assume the ##MSL# should work too.
Hope this helps!!
That worked like a charm! Now I am just following the tutorial for the Web and the MMS. Thank you so much guys! You are awesome!
Hello,
I am considering updating my gingerbread based ROM on my old EVO 4g (I am currently running Cyanogen mod 7.1)...
Its been a very long time since I've flashed a ROM to my phone, but I have been wanting to upgrade to an ICS/JB ROM for a while because (amongst other things) I hear that these android 4.0 ROMs are better when it comes to battery life.. As you can probably tell, I am not one of these folks that re-flashes their rom every week so I may be a bit rusty with this and I am a little bit intimidated. While I would like to try something new I also am a bit worried that my lack of experience may cause me to make a mis-step and mess up my phone..
The ROM I am looking at right now is the new release of MotoBlur'd, found here: .. I understand that this ROM is based on CyanogenMod 10, and since it seems I cannot get a version of the raw CM10 directly to install on my phone, perhaps MotoBlur'd is the next best thing...
But before I open up this can of worms and go off and wipe my phone and flash this new rom, I had 3 questions which I hope someone with experience can answer
1) All other things being equal, would this actually help with the battery life, over the Gingerbread based CM 7.1?
2) Is it still the case that Netflix and other video viewing apps do not work with this (or any other ICS/JB) ROM?? They mention it in the android dev thread, but no one has confirmed that these things work or not work.
3) Do I have to peroform any extra steps or install anything else (other than what is shown in the instructions) to move the phone from CM 7.1 to the latest Motoblur'd ?? For example do I need to install an ICS based ROM first before JB? Or can I just flash directly to this ROM??
Hopefully I can do this without causing too much damage or requiring too much help from the users in this forum... Of course any advice or suggestions anyone can give me would help...
Thanks
TPK2013
For number 3 just make sure your using the smelkus 4.3 recovery and for sure wipe the sd-ext to make sure you get a clean flash..
Sent from my PC36100 using xda app-developers app
hondafreak513 said:
For number 3 just make sure your using the smelkus 4.3 recovery and for sure wipe the sd-ext to make sure you get a clean flash..
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
1. battery life will be worse. most likely
2. That is stil lthe case
3. Read the Guide in my signature (Evo Superguide). It'll help you a lot
HipKat said:
1. battery life will be worse. most likely
2. That is stil lthe case
3. Read the Guide in my signature (Evo Superguide). It'll help you a lot
Click to expand...
Click to collapse
Excellent guide, Hipcat... I think this will really be helpful to me... As someone who doesn't do this all the time, it can really help to have a guide like that to cover all the bases.. I know we are supposed to try to search for the stuff that we need to know, but sometimes its hard to know even what we need to know, and sometimes the multitudes of information we find is contradictory or out of date, so this really helps..
I found a broken link on it, so I posted that as a reply in your thread (I hope thats okay)...
I think I may just stick with my GB based rom, as much as I would like to monkey around with ICS or JB.. I guess I don't see the sense of switching if it won't help my battery life and if it will prohibit the use of video playing apps (which, I know, suck a lot of battery)..
The biggest problem for me is the battery life (I found several contradictory explainations on how to calibrate the battery, I will try the one found in your guide next), but mainly I believe my problem is that I have too much garbage loaded on the phone (not reloading after a year and a half can do that), and a lot of stuff loads in the background so that is probably affecting my battery life.. Also I don't think I am using the most up-to-date radio, which is probably causing the most battery drain of all... So I am going to try the following...
1) I am going to (actually I already have) upgrade my radio to 2.15.00.01.15
2) As per your, and honda's suggestion I will try to update my recovery to smelkus 4.3 (I think I am using clockwork recovery right now, although I am not sure if that is the same thing or not)..
3) I will try to re-format and re-partition my SD card and attempt to install A2SD so I can have more room for apps (can I use A2SD with CM 7?)
4) I will wipe everything, and reload to CyanogenMod 7.2 (perhaps this will work better than 7.1) and reload about half the apps I have on there now (only the stuff I am using now)..
If battery life is my main concern, is there a better ROM I should be using??? I picked CM in the first place because it was an AOSP (no frills, no extra garbage) ROM, however I haven't been able to update my PRL (havent ever updated it, probably)...
Thanks again for your response... You and your guide have been quite helpful...
TPK2013
TPK2013 said:
Excellent guide, Hipcat... I think this will really be helpful to me... As someone who doesn't do this all the time, it can really help to have a guide like that to cover all the bases.. I know we are supposed to try to search for the stuff that we need to know, but sometimes its hard to know even what we need to know, and sometimes the multitudes of information we find is contradictory or out of date, so this really helps..
I found a broken link on it, so I posted that as a reply in your thread (I hope thats okay)...
I think I may just stick with my GB based rom, as much as I would like to monkey around with ICS or JB.. I guess I don't see the sense of switching if it won't help my battery life and if it will prohibit the use of video playing apps (which, I know, suck a lot of battery)..
The biggest problem for me is the battery life (I found several contradictory explainations on how to calibrate the battery, I will try the one found in your guide next), but mainly I believe my problem is that I have too much garbage loaded on the phone (not reloading after a year and a half can do that), and a lot of stuff loads in the background so that is probably affecting my battery life.. Also I don't think I am using the most up-to-date radio, which is probably causing the most battery drain of all... So I am going to try the following...
1) I am going to (actually I already have) upgrade my radio to 2.15.00.01.15
2) As per your, and honda's suggestion I will try to update my recovery to smelkus 4.3 (I think I am using clockwork recovery right now, although I am not sure if that is the same thing or not)..
3) I will try to re-format and re-partition my SD card and attempt to install A2SD so I can have more room for apps (can I use A2SD with CM 7?)
4) I will wipe everything, and reload to CyanogenMod 7.2 (perhaps this will work better than 7.1) and reload about half the apps I have on there now (only the stuff I am using now)..
If battery life is my main concern, is there a better ROM I should be using??? I picked CM in the first place because it was an AOSP (no frills, no extra garbage) ROM, however I haven't been able to update my PRL (havent ever updated it, probably)...
Thanks again for your response... You and your guide have been quite helpful...
TPK2013
Click to expand...
Click to collapse
Yep, I fixed that link and what you said is why I wrote that guide; because searching can be a real pain in the @ss sometimes. It's like a teacher telling you to look up a word you can't spell. Well how do you search for an answer if you're not really sure of the question?? lol
You cant update your PRL on any non-stock rom. It has to be stock for you to be able to do that
Well if battery life is your main concern I always suggest a good sense 3.0 ROM. If you are worried about bloat that can be removed. If you want I can hook you up with a rom/kernel combo with everything you want.
When I am not testing or making a new rom I use sense 3.0 and can get 8 hrs of heavy use on stock battery. Thats netflix with 3-4 hrs use plus web surfing and calls during the rest. On my extended battery with light use I can get 4+ days.
If you would like to try my rom pm me before you partion your sdcard. There are certain things you need to do for it to work right.
Sent from my PC36100 using xda app-developers app
CNexus said:
You cant update your PRL on any non-stock rom. It has to be stock for you to be able to do that
Click to expand...
Click to collapse
Perhaps I will go to stock and try to update the PRL before I go ahead and update the ROM to custom... However, this Evo is on Boost Mobile (not Sprint) network, so I am not sure how to appropriately update the PRL... Should I just update it as if it were a regular Sprint Evo 4g or does it matter?
CNexus said:
You cant update your PRL on any non-stock rom. It has to be stock for you to be able to do that
Click to expand...
Click to collapse
Umm updating prl only requires the *228 call from the phone and it works on any rom. Now to put a custom or older prl it takes a bit more. Updating your profile now that I do believe you have to be on a Sprint rom but I don't have Sprint so I can't say for sure.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Umm updating prl only requires the *228 call from the phone and it works on any rom. Now to put a custom or older prl it takes a bit more. Updating your profile now that I do believe you have to be on a Sprint rom but I don't have Sprint so I can't say for sure.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Never heard of that *228, so cant say anything about that
Updating profile and prl I've always seen and heard can only be done on stock, unless you use this ##codes apps I saw somewhere....
The ## codes only work on the sprint roms. To change prls on AOSP roms you need a windows pc with qpst setup and prl files on the pc. Then you have to enable diagnostic mode through adb or a terminal emulator. There is a thread here on our EVO forum to do it. I will bump it so you can check it out. It sure beats all the backing up and restoring to do it.
Edit: I bumped it. It is in the dev section.
jlmancuso said:
The ## codes only work on the sprint roms. To change prls on AOSP roms you need a windows pc with qpst setup and prl files on the pc. Then you have to enable diagnostic mode through adb or a terminal emulator. There is a thread here on our EVO forum to do it. I will bump it so you can check it out. It sure beats all the backing up and restoring to do it.
Edit: I bumped it. It is in the dev section.
Click to expand...
Click to collapse
Yeah. Theres an app that uses scripts to emulate the ##code functions.
Really? I can't believe I have not heard of that till now. Do you know what it is called? I would love to check it out.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
The ## codes only work on the sprint roms. To change prls on AOSP roms you need a windows pc with qpst setup and prl files on the pc. Then you have to enable diagnostic mode through adb or a terminal emulator. There is a thread here on our EVO forum to do it. I will bump it so you can check it out. It sure beats all the backing up and restoring to do it.
Edit: I bumped it. It is in the dev section.
Click to expand...
Click to collapse
Found the thread, thanks!!
Now I just have to figure out which PRL file to use for my Evo on Boost, and where to find it (I think this is what stopped me from updating the PRL before, not knowing if I should use a sprint PRL or something else)...
Edit: I did find this thread regarding boost PRLs on EVO
And if there is indeed an app that emulates the ## commands, I would like to know what that is...
... TPK2013
Heck if your on boost you need a boost prl. You can Google boost prls and find dozens of them. I would suggest using the latest one. Just dial *228 and it will update your prl. After it finishes reboot your phone. It is really that simple. I do it on my cricket flashed EVO but it works for every service provider.
Sent from my PC36100 using xda app-developers app
Disclaimer: what ever you do to your phone is on you! me or nobody will be responsible if your phone get mess up or die... it will be up to you !!!!!!!!!!!!!!!!!
This only work if your Data profile is missing which is why you lost data otherwise its something else that broke it.
You need!!!!
To be on stock.
The msl password.
Copy the Data profile down or the whole thing... in case you rom in missing more information which the phone need to communicate to the service. Since some rom cant read data profile you need to reprogram the phone you seft.Just put the data profile info back in and enable lte.
Note: if something is missing just add it back in.
1_Flash your rom and dial ##3282#
2_ In the "edit" program put your msl password
3_add your phone info. back in
4_ restart your phone
5_ in setting / update/ update profile.... just update the profile and you are good to go.
If you want the msl password root your phone and download get my msl at the android market then try to put a ramdom msl password then go back to the msl app the try it again
Dont forget to thank.
Sent from my SPH-L900 using xda app-developers app
Can you please beter define step 1? "flash your rom on deal ##3282##... I recognize the dialer code but what exactly are you saying here?
As for "any ROM".. is that really true? Dialer codes don't work on CM ROMs, right? So this only works on TW ROMs with in-tact dailer codes?
honki24 said:
Can you please beter define step 1? "flash your rom on deal ##3282##... I recognize the dialer code but what exactly are you saying here?
As for "any ROM".. is that really true? Dialer codes don't work on CM ROMs, right? So this only works on TW ROMs with in-tact dailer codes?
Click to expand...
Click to collapse
I'm sure he meant, "...AND DIAL ##3282#"
Yeah It will work if your rom support it...
If not find out how to get the programming to work so that you can dial the ##3282# and program your phone from there. In cm10.1 or other nonexistent programming you may have to add the hidden file back in which the developers removed for a reason.
Sent from my SPH-L900 using xda premium