Desiree Brick - Desire Q&A, Help & Troubleshooting

My Desire doesn't start anymore. I get a white screen with HTC on it. When I press power+vol down I get the fast boots mode. I cleared all user data, rebooted.... nothing.
The fastboot screen shows:
Bravo PVT1 ship S-ON
Hboot 0.93.0001
Microp-031p
Radio 5.11.05.27
I tried different RUU's but they all being blocked by the bootloader. Downgrading to a lower bootloader failed. I'm stuck and out of options.
I hope someone can help me here.
Cheers.
Leo

2.29.405 WWE should be fine if not branded, if it is branded you need a goldcard ro be made
Sent from my Sensation XE with Beats Audio Z715e

Try bortak's guide.

Desire Bricked
kotag82 said:
2.29.405 WWE should be fine if not branded, if it is branded you need a goldcard ro be made
Sent from my Sensation XE with Beats Audio Z715e
Click to expand...
Click to collapse
I tried that RUU but for some reason it doesn't connect via USB when I'm on fast boot. Other RUU installers are working but abort after a message that tells me that the bootloader is newer

Mr. 69 said:
I tried that RUU but for some reason it doesn't connect via USB when I'm on fast boot. Other RUU installers are working but abort after a message that tells me that the bootloader is newer
Click to expand...
Click to collapse
Try 2.3 RUU that can be found on htc dev site, it's compatible with 0.93 hboot.
Plus you need to have htc sync installed on your PC or at least drivers for fastboot.
Sent from my HTC Desire via flashes and thunders

Thanks for the tip. This RUU was able to fix my phone!

Related

Returning to Stock Help Needed

Hi All,
Returning missus Desire back to stock and have searched and found many guides..
following through, I'm basically installing the following RUU from .EXE file:
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704.exe
The phone was previously on Orange and I understand there is no RUU for this.
Upon installing this EXE...it gets to the area about checking the phone and intialising and all I get everytime is an Error 170 USB Connection Error. It can't seem to see the phone.
I am on XP and have tried the phone booted in to its current ROM (ICS) and also under FASTBOOT USB but neither makes any difference...
Any ideas?
Many thanks...
Rich
You're missing proper drivers on your PC. Try to download and install htc sync or driver package from htc dev site and then to reconnect phone.
Sent from my HTC Desire using XDA
Thanks....Ive installed HTC Sync and now worked fine...
Although I believe I am now stuck on the white HTC screen Whoops!!!
Any ideas?
In my Recovery area it still says:
Revolutionary
Bravo PVT1 Ship S-Off
HBOOT 6.93.1002
MICROP-031d
Touch Panel - SYNT0101
Radio 4.05.00.11
Any ideas???
Funkyfin2000 said:
In my Recovery area it still says:
Revolutionary
Bravo PVT1 Ship S-Off
HBOOT 6.93.1002
MICROP-031d
Touch Panel - SYNT0101
Radio 4.05.00.11
Any ideas???
Click to expand...
Click to collapse
That's not recovery, that's bootloader. Below that you have meny loking smth like this:
FASTBOOT
RECOVERY
ERASE STORAGE...
You can use volume up and down buttons to navigate, highlight recovery and then press power to enter recovery.
If you wanna install stock, reboot your phone and let RUU running. My recomendation is to use 2.3 RUU since it's made for all versions of desire no matter of carrier. You can find it on htc dev site.
Sent from my HTC Desire using XDA
Well I have put back the stock HBOOT....
installed a RUU which now just gives me a white HTC screen and goes no further....
I downloaded the 2.3.3 correct RUU but it won't see my device and HTC sync won't install the drivers.
Any ideas folks?
Rich
Oh my BOOTLOADER now says this:
ALPHAREV
BRAVO PVT1 SHIP S-OFF
HBOOT 6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
Radio 4.05.00.11
And also...within Device Manager my phone is being picked up as Android Bootloader Interface
Ok, this is the trick, your hboot has write protection and ruu can't overwrite radio. From your bootloader I can see you have old radio which won't work with 2.3 RUU. Of course RUU should overwrite the radio during install but it's not posible because of protected hboot...
You have to download downgrade hboot from alpharev site, flash it and you will have unlocked hboot. After that run RUU from PC and it will overwrite both radio and hboot.
But, you will lose s-off and root, so revolutionary again :-D
And don't worry about what's written in device manager, it's normal.
Sent from my HTC Desire using XDA
Thanks Nloo for taking an interest...
|I have already flashed Bravo Stock off the Alpharev site .... you can see in my post a change in the HBOOT information from Revolutionary to ALPHArev.....
If I try using the RUU it just says it can't find the Phone again.....USB error 170....
Any more help would be appreciated please...bricked phone!!
Funkyfin2000 said:
Thanks Nloo for taking an interest...
|I have already flashed Bravo Stock off the Alpharev site .... you can see in my post a change in the HBOOT information from Revolutionary to ALPHArev.....
If I try using the RUU it just says it can't find the Phone again.....USB error 170....
Any more help would be appreciated please...bricked phone!!
Click to expand...
Click to collapse
You actually don't want to read carefully, not stock bravo but DOWNGRADE that's the right one. After flashing you'll have this on top in bootloader:
ALPHAREV UNLOCK
not just alpharev.
Then after flashing reboot to bootloader not fastboot and then run RUU.
If RUU won't work you can try with rom.zip on sd card but that's a different story.
Sent from my HTC Desire using XDA

[Q] My htc WFS cdma hangs on "jumping to DIAG"

I've HTC WFS a510c Cdma for a month a screen start freezing tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive, then i saw senaia's post about TP Calibration and tried, so i tried this
http://forum.xda-developers.com/showthread.php?t=1436314
and in process i've got a problem
I done all steps to make a goldcard i boot to hboot to flash the PG76DIAG.nbh/PG76DIAG.zip files, it hangs on the "jumping to DIAG"
am i doing something wrong or is there another method
phone specs
Hboot v1.10.0001
Radio v0.94.00.0109
android 2.3.5 root
bootloader unlocked
marvelc pvt ship s-off rl
microp - 0354
kinnector217 said:
I've HTC WFS a510c Cdma for a month a screen start freezing tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive, then i saw senaia's post about TP Calibration and tried, so i tried this
http://forum.xda-developers.com/showthread.php?t=1436314
and in process i've got a problem
I done all steps to make a goldcard i boot to hboot to flash the PG76DIAG.nbh/PG76DIAG.zip files, it hangs on the "jumping to DIAG"
am i doing something wrong or is there another method
phone specs
Hboot v1.10.0001
Radio v0.94.00.0109
android 2.3.5 root
bootloader unlocked
marvelc pvt ship s-off rl
microp - 0354
Click to expand...
Click to collapse
Remove the zip file from the Sdcard and then try.
Sent from my HTC Sensation XE with Beats Audio using xda premium
I've tried many variant any tutorial please if you have please give url
I don't have a tut I have experience with my xtc clip firstly try a different Sdcard. Then can sometimes fail as gold cards. Secondly you will only the the pg76diag.nbh, not the zip file. Remove and extras attached to the phone, USB, headphones ect. Boot into hboot and it will find the diag file and jump into it. If it still hangs remove your sim card and then try. It shouldn't really be in during the process.
Sent from my HTC Sensation XE with Beats Audio using xda premium
sadly we have no Sim card
Sent from my HTC_A510c using Tapatalk
kagevazquez said:
sadly we have no Sim card
Sent from my HTC_A510c using Tapatalk
Click to expand...
Click to collapse
Are you not s-off as your sig states? If you are you won't need one for recalibrating the screen.
Sent from my HTC Sensation XE with Beats Audio using xda premium

[Q] Phone won't boot past the HTC logo screen!

Heya! I tried to go back to Stock completely. And probably messed up big time... I simply downloaded a Europe RUU from Shipped Roms and installed it on my Desire.
This is the RUU I downloaded: http://www.shipped-roms.com/downloa...io_32.30.00.28U_4.05.00.11_release_121684.exe
My HTC Desire is from Denmark, in Europe, if that matters
So, it seems like everything was installed correctly and it ended saying that it'd reboot my phone, but now it doesn't get past the logo.
I try to boot into bootloader (I think it's called? ), the power + vol down, and I can get into that. But I can't fastboot or boot into recovery... So not sure what to do from there...
I've used unRevoked to s-off and root my phone. I've been running CM7 till now.
Please help
jomik said:
Heya! I tried to go back to Stock completely. And probably messed up big time... I simply downloaded a Europe RUU from Shipped Roms and installed it on my Desire.
This is the RUU I downloaded: http://www.shipped-roms.com/downloa...io_32.30.00.28U_4.05.00.11_release_121684.exe
My HTC Desire is from Denmark, in Europe, if that matters
So, it seems like everything was installed correctly and it ended saying that it'd reboot my phone, but now it doesn't get past the logo.
I try to boot into bootloader (I think it's called? ), the power + vol down, and I can get into that. But I can't fastboot or boot into recovery... So not sure what to do from there...
I've used unRevoked to s-off and root my phone. I've been running CM7 till now.
Please help
Click to expand...
Click to collapse
Try with 2.3 RUU, or try bortak's guide.
Sent from my HTC Desire using XDA
Bortak's guide? Do you have a link? EDIT: I was looking at this; http://forum.xda-developers.com/showthread.php?t=1275632 - but I can't see what stage my phone would be at.. :/
- As I said, it won't get past the HTC logo, so the computer won't recognize it. I can't install a new RUU, I tried... :/
I don't know where I can find v. 2.3 either, I couldn't see it on shipped roms
As I said, I am stuck at the HTC screen, but I can load it up into bootloader, and when I try to go to Recovery, it just starts up at the HTC screen again, stuck.
First post hboot/fastboot screen info
2) was phone s-off prior RUU?
3) Is your phone recognised in fastboot mode via USB cable? -boot phone power+back button to fastboot, connect USB cable and run in cmd or terminal "fastboot devices" without quotes-bear in mind htc sync must be uninstalled and unrevoked drivers installed.
Sent from my Sensation XE with Beats Audio Z715e
Yeah, my phone was S-OFF and rooted when I tried to install the RUU
This is what my bootloader screen says:
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-021d
TOUCH-PANEL-SYNT0101
RADIO-4.05.00.11
Aug 10 2010, 12:52:18
HBOOT USB PLUG
then the menu.
I get the Android Bootloader Interface pop-up on my computer when I plug it in in Bootloader.
I have uninstalled HTC Sync, but not sure if my UNrevoked drivers are still installed. Trying the power down + back button, this is in power + vol down.
When I have it in fastboot (Went from the power + vol down to the fastboot option.) it pops up as "My HTC" in my device management (I'm on Windows 7 64-bit)
It says that fastboot is an unrecognized program when I try to run it from CMD.
My desire says "FASTBOOT USB", surrounded by red color.
Have you downloaded fastboot? Go to bortak's guide and download it from resources, fastboot.zip
Sent from my Sensation XE with Beats Audio Z715e
Then download hboot downgrade from alpharev.nl, folow instructions there then you can run RUU, use 2.29.405 WWE, if not branded
Sent from my Sensation XE with Beats Audio Z715e
Okay, I installed the fastboot from Bortak's guide, installed Android SDK as well (to be safe) and went and did the alpharev.nl stuff. Flashed HBOOT Downgrader and I installed the WWE 2.29.405 RUU.
Everything's coooool and working it seems!
Thanks man
jomik said:
Okay, I installed the fastboot from Bortak's guide, installed Android SDK as well (to be safe) and went and did the alpharev.nl stuff. Flashed HBOOT Downgrader and I installed the WWE 2.29.405 RUU.
Everything's coooool and working it seems!
Thanks man
Click to expand...
Click to collapse
I am having the same problem with my Htc Desire, can you please explain in details how you solve the problems. Thanks.
pelumiv said:
I am having the same problem with my Htc Desire, can you please explain in details how you solve the problems. Thanks.
Click to expand...
Click to collapse
I was struck in this same situation about a month ago. First of all My desire was S-OFF with stock hboot at that time. This is what i did at that time:laugh:
You need to go to alpharev site and download the Bravo Downgrader. Download Fastboot commander from the forum. And boot your desire in fastboot mode and connect it to pc. And flash the bravo downgrader file via fastboot commander. And then you can install any RUU assuming your desire is unbranded if not you need to make a goldcard.
Hope this helps.
phone wont boot in any way.,!
Hi,.,
I've a spice mi-505.,with ICS in it.,! It was rooted.,!
Well at the moment.,it wont boot,,.neither in recovery mode nor in factory mode.,though it was never able to boot into recovey.,!
So all I was trying to .,is to .,boot it into recovey.,so i could learn flash roms.,.! I tried goo manager .,to intstall open recovey script.,!
goo manager kept on crashing so i flashed the img.,using flashyfy .,into the boot recovery.,! I think this is where i went wrong.,!
So.,.can any one help me.,plss.,!
Thnk in advance.,!

[Q] HTC Desire boot up issue

Hi All,
I have been asked by a friend to have a look at their Desire which isn't booting up, i've tried searching the forums but am at a bit of a dead end.
Basically when powering up the phone it goes to a white screen with the green htc logo and stays like this indefinitely.
I can however boot into HBOOT and it gives me the following info:
BRAVO PVT3 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
HBOOT
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
When I try to boot into RECOVERY it goes back to the white screen with htc logo.
When I try CLEAR STORAGE the problem remains.
I can go into FASTBOOT and this does change to FASTBOOT USB when I plug it into the USB port.
So because it's S-ON this means I can't push a recovery image via command prompt right?
I've tried downloading: RUU_Bravo_Froyo_HTC_WWE_2.29.405.14_Radio_32.49.00.32U_5.11.05.27_release_224699_signed.exe from shipped-roms.com, extracting ROM.zip and changing the name to PB99IMG.ZIP and putting it into the root of my sd cards (4GB and 16GB kingstons) but when I boot the phone into HBOOT i get the following:
SD Checking...
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
and a progress bar loads, then
Checking..[PB99IMG.zip]
followed by the following message:
CID incorrect!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
I've tried turning my SD card into a gold card but I presume this has failed if I'm getting that message?
Has anybody got any pointers? Is the phone bricked?
Any help is much appreciated...
yh ur correct ul have to get a working goldcard to pass the cid check
Sent from my HTC Desire
jmcclue said:
yh ur correct ul have to get a working goldcard to pass the cid check
Sent from my HTC Desire
Click to expand...
Click to collapse
OK, I think I've successfully created the goldcard now, was using the wrong CID!
I transferred the same PB99IMG.zip to the root of the goldcard and booted into HBOOT. It loaded again and failed with the following message:
Main Version is older!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
What does this mean? Am I using the wrong PB99IMG.zip or something?
Is there any way to actually check that the creation of the goldcard was successful? Or does the fact that this is a different message mean that it's passed the CID check?
Your Phone is NOT bricked, go to the thread below, I use the ROM in the second thread and have had no trouble with it
http://forum.xda-developers.com/showthread.php?t=1275632
http://forum.xda-developers.com/showthread.php?t=1403113
Taysider said:
Your Phone is NOT bricked, go to the thread below, I use the ROM in the second thread and have had no trouble with it
http://forum.xda-developers.com/showthread.php?t=1275632
http://forum.xda-developers.com/showthread.php?t=1403113
Click to expand...
Click to collapse
Cheers, so how do I get from where I am now to flashing a custom ROM?
I see from the 1st link you posted it says (if phone is S-ON):
S-ON
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Not sure about step 4 here?
that ruu is an exe file so with ur phone plugged in via usb just run the file (double click it) on ur computer. just follow all bortaks instructions
and ur goldcard works its fine
Sent from my HTC Desire
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
lol
where do u get this 2.3? htcdev?
Sent from my HTC Desire
jmcclue said:
lol
where do u get this 2.3? htcdev?
Sent from my HTC Desire
Click to expand...
Click to collapse
Smth like that...
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
So how do I fix my problem this way?
go to HTCdev and download the 2.3 ruu
Sent from my HTC Desire
the 2.3 ruu nloooo is on about, just run it the same way as the first 1 u tried
Sent from my HTC Desire
jmcclue said:
the 2.3 ruu nloooo is on about, just run it the same way as the first 1 u tried
Sent from my HTC Desire
Click to expand...
Click to collapse
OK, I ran the 2.3 RUU and it seemed to do the trick. I could then turn the phone on but it seems a lot slower than I'm used to.
I've now rooted it and have S-OFF using revolutionary. Now it boots OK most of the time but as soon as I enter my PIN to unlock the SIM it reboots, and half the time when it reboots it seems to get stuck in a boot loop and gets quite warm.
I have a feeling there may be some underlying hardware issue at the heart of this problem.
Will try a custom ROM next and see if it makes any difference.
seklly said:
So how do I fix my problem this way?
Click to expand...
Click to collapse
Go to htc dev site, kernel source code section, configure filter by device (desire) and check 'other' below. Click find files and the first on the list is 2.3 upgrade, download it, install HTC sync, reboot phone to bootloader (not fastboot) and run .exe file from RUU. Simple, isn't it.
Sent from my HTC Desire via flashes and thunders
nlooooo said:
Go to htc dev site, kernel source code section, configure filter by device (desire) and check 'other' below. Click find files and the first on the list is 2.3 upgrade, download it, install HTC sync, reboot phone to bootloader (not fastboot) and run .exe file from RUU. Simple, isn't it.
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
I didn't open the second page... :banghead:
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I didn't open the second page... :banghead:
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
D'OH
Sent from my HTC Desire
Can you give me a link to the 2.3, i cant find it and got the same problem here. Thanks
Oyoyewii said:
Can you give me a link to the 2.3, i cant find it and got the same problem here. Thanks
Click to expand...
Click to collapse
nlooooo has given perfect instructions above
Sent from my HTC Desire
Ignore
Sent from my HTC Desire

Help! S-On and Radio_V2 - Fail PU during upgrading

Hi friends
I am junior here. Hope you will help me to finish my job. I received htc desire with 4 exclamation mark on each corner and no hboot menu anymore. I tried to upload different RUU but failed , finally I decide to repair it with Riff box and put supercid in it. But every time when I rung RUU 4 triangles came again. At last I repaired with riff again and now i extract rom.zip file RUU and run it in gold card but fail flashing at " Radio_V2 - Fail PU" .
I really getting mad and no point come to hand from where to start to finish this big headache . I extract and flash following files in SD card.
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed
HTC_Desire_Android_2.3_Upgrade.
Its not getting into recover mode
its details are as follow.
Bravo PVT1 SHIP S-ON
HBOOT 1.02.0001(which was 0.93.000 after repair with riff)
Radio-4.06.00.02_2
pls brothers help me to the correct point. I will highly appreciate it. thanks
and regards,
hi
nsnobel2 said:
Hi friends
I am junior here. Hope you will help me to finish my job. I received htc desire with 4 exclamation mark on each corner and no hboot menu anymore. I tried to upload different RUU but failed , finally I decide to repair it with Riff box and put supercid in it. But every time when I rung RUU 4 triangles came again. At last I repaired with riff again and now i extract rom.zip file RUU and run it in gold card but fail flashing at " Radio_V2 - Fail PU" .
I really getting mad and no point come to hand from where to start to finish this big headache . I extract and flash following files in SD card.
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed
HTC_Desire_Android_2.3_Upgrade.
Its not getting into recover mode
its details are as follow.
Bravo PVT1 SHIP S-ON
HBOOT 1.02.0001(which was 0.93.000 after repair with riff)
Radio-4.06.00.02_2
pls brothers help me to the correct point. I will highly appreciate it. thanks
and regards,
Click to expand...
Click to collapse
S-ON = Security ON...... which means you cant modify or rewrite in SYSTEM PROTECTED areas....
The hboot / partition table changing requires S-OFF, and Radio flashing is also writing data to SYSTEM AREAS.... So first follow a tutorial to get S-OFF, using revolutionery preferably.... Then try to upgrade Radio....
Regards
Yasir
Yasir Javed Ansari said:
S-ON = Security ON...... which means you cant modify or rewrite in SYSTEM PROTECTED areas....
The hboot / partition table changing requires S-OFF, and Radio flashing is also writing data to SYSTEM AREAS.... So first follow a tutorial to get S-OFF, using revolutionery preferably.... Then try to upgrade Radio....
Regards
Yasir
Click to expand...
Click to collapse
bro I am 100% agree with you but will gold card and supercid will not work as S-Off in flashing?
plus in revolutionary method , to gain s-off your phone must go to in main normal window otherwise it will not work.
any other solution?
nsnobel2 said:
bro I am 100% agree with you but will gold card and supercid will not work as S-Off in flashing?
plus in revolutionary method , to gain s-off your phone must go to in main normal window otherwise it will not work.
any other solution?
Click to expand...
Click to collapse
Listen, if your hboot version is 1.02, revolutionary is the only method which will work.....if you have older, use unrevoked........
To get new hboot, go to htc dev, download 2.3 gb ruu, and run it.....follow instruction, you'll get new hboot, now use simply revolutionary, it will work guaranteed....
Regards Yasir
Sent from my HTC Desire using xda app-developers app
Yasir Javed Ansari said:
Listen, if your hboot version is 1.02, revolutionary is the only method which will work.....if you have older, use unrevoked........
To get new hboot, go to htc dev, download 2.3 gb ruu, and run it.....follow instruction, you'll get new hboot, now use simply revolutionary, it will work guaranteed....
Regards Yasir
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
bro thanks for your guide. but phone is not in normal position. its hang on htc logo and for revolutionary phone must be it normal main screen to work on it. when i run it always say " connecting to device ......"
what should i don now?
Try couple of times 2.3.3 ruu as only option... If still radio brick, try freezer trick (put phone into bag and into freezer to cool down) then try ruu if no working unfortunately this is the dead end
Sent from my Sensation XE with Beats Audio Z715e
Pvt 1 model is well known for overheating mobo, maybe That is the cause of radiobrick
Sent from my Sensation XE with Beats Audio Z715e
Try changing data cable, it once happened to me during hboot flash.... Try it and tell....
Regards
Sent from my HTC Desire using xda app-developers app

Categories

Resources