Related
I was wondering if there are any go to screen proctectors? Any to avoid, like do any cause issues with the touch screen?
Sent from my Galaxy Tab!
I'd avoid the hard plastic static-type. They're difficult to put on without dust. I've been using the ones from clearprotector (.com). 50% off and free ship with the code iwantultra (have it memorized cause I've gotten several). The corners and edges are kind of a ***** to get on, but they work well and come with a lifetime warranty (or so they say...). This is a wet-application so don't use them unless you're willing to take the time to watch the youtube videos to learn how to install, and then takes about 20 minutes to install.
I get mine from www.bestskinsever.com. I've had no problems with them. The screen protector is easy to apply and very durable.
I have Ghost Armor on mine and like it, it is a bit smoother than Zagg or Bestskinsever.
Be warned if you want the full body protection, adding this to the back of my tab caused me to have the newton ring problem. I never had the problem with just the screen protector on, I should I have just stuck with the screen and not the entire thing but I really wanted the matte back on my tab.
Thanks fellas. I have and used to do/use the wet application ones for a while. Then I got tired of them and just went with the cling ones. I think I'll get the wet app and it should last a longgg time. Especially since Im not going to be using the tab every day.
I went with Clarivue on the recommendation of a friend.
It's decent enough, no tackiness or anything like that but it's not the best fitting, could've been a couple of mm wider and taller.
Other than that, whilst I've had a long-standing dislike for them, recently I've found Zagg's InvisibleShield protectors to be pretty decent - they seem to be very well fitted and the tacky feel to them that I remember doesn't seem as noticeable.
Kinda wish I'd gone with them for my Tab
Which would you guys say offers the smoothest screen experiences of all? I don't care about longevity as I only use my tab about once every 2 weeks
Imo the smoothest would be the cling on ones.
Sent from my Galaxy Tab!
I purchased these in July from Amazon. http://www.amazon.com/gp/product/B0058NXPLK
I was never a fan of the "wet" applications, to me it just seemed like too much work and I was never comfortable spraying any type of liquid all over my devices, regardless of how harmless they might be.
But anyway, this is a clear, non-matte protector that is the "static cling" kind of application. Once it goes on properly, you cannot see that is even there. The touch feeling is the same as if you had no protector on. I really feel that those matte ones, while they do reduce sun-glare, a lot of them provide a "tacky" feeling that maybe is fine for a smaller screen such as a phone, but can become very annoying for a larger screen if you do a lot of swiping across the larger surface area of a tablet. But that is a personal thing....I usually don't use my tablet outside in the bright sun anyway, so the matte types are useless for me.
I've had it on since the end of July and it's held up very well. You do have to wipe the smudges off the screen occasionally, but you'd have to do that anyway even with no protector. I'm extremely satisfied with these.
So I've got an Invisible Shield en route for my Tab, will post back when it arrives.
Same here haha.
Sent from my Galaxy Tab!
I just bought the glare-reduction screen protector from BodyGuardz. Has anyone else had any experience with them? I wanted something that would offer a decent amount of protection for the screen (fingerprint and physical pressure), but also not reduce the touch sensitivity at all. (I type with the tip of my nose since I can't use my fingers, and trying to press too hard hurts )
Not sure where you can get it, but here in Singapore there's a brand called DataFlex and their screen protectors seem really good.
I bought SGP steinheil shield ultra optics. I liked it.
Raistlin1 said:
I have Ghost Armor on mine and like it, it is a bit smoother than Zagg or Bestskinsever.
Be warned if you want the full body protection, adding this to the back of my tab caused me to have the newton ring problem. I never had the problem with just the screen protector on, I should I have just stuck with the screen and not the entire thing but I really wanted the matte back on my tab.
Click to expand...
Click to collapse
So this newton ring issue is a major problem. What if I just protect the back and leave the screen open? I have the new logitech keyboard case on the way and the front is protected in the case, but the back is exposed. I planned on protecting the back only. But I wont do anything if it'll case the newton rings.
Newton Ring?
nuprotocol said:
So this newton ring issue is a major problem. What if I just protect the back and leave the screen open? I have the new logitech keyboard case on the way and the front is protected in the case, but the back is exposed. I planned on protecting the back only. But I wont do anything if it'll case the newton rings.
Click to expand...
Click to collapse
Yeah. Same here. Just want a more "grippy" back. How does one produce Newton Rings from the back of the device. Methunked it was a display issue resulting from the interaction of the protector and display glass...kinda by definition...
Hopefully we'll find out soon. I just want to protect the back.
skeeter123 said:
Yeah. Same here. Just want a more "grippy" back. How does one produce Newton Rings from the back of the device. Methunked it was a display issue resulting from the interaction of the protector and display glass...kinda by definition...
Click to expand...
Click to collapse
I blame the install of the rear skin because I had the screen skin installed first and then three weeks later I had the rear done. He turned the tab face down and installed the skin. When he turned it over, bam, Netwon Rings...
I never had them before the front screen protector, during the front screen protector install or after the front protector was on the Tab.
Will it happen to you? I have no idea but from what I have read about the problem it is caused because of the Tab moving/flexing which can be caused by excessive heat and certain handling of the Tab.
thanks!
Raistlin1 said:
I blame the install of the rear skin because I had the screen skin installed first and then three weeks later I had the rear done. He turned the tab face down and installed the skin. When he turned it over, bam, Netwon Rings...
I never had them before the front screen protector, during the front screen protector install or after the front protector was on the Tab.
Will it happen to you? I have no idea but from what I have read about the problem it is caused because of the Tab moving/flexing which can be caused by excessive heat and certain handling of the Tab.
Click to expand...
Click to collapse
Thanks for taking the time to explain the details. Sounds like a warranty kinda thing mebbe. Hope it gets resolved! Mine is on order and I'll watch out for this issue.
Cheers!
slack04 said:
I'd avoid the hard plastic static-type.
Click to expand...
Click to collapse
I bought an anti-glare protector from Cellularbuy on eBay and managed to get it on in one go with no dust at all. The protector fits perfectly and the camera and light sensor holes line up spot on. The anti-glare makes the screen look a little grainy, but I hear that even the Steinhell ones that are many times more expensive have the same problem.
This has been gone over millions of times on each forum here, but here's how I did it:
-Wipe the screen down with a soft cloth and glasses cleaner or isopropyl to get any grease off
-Run the shower in a small bathroom on hot until the room is unbearably steamy
-Put on a hat to keep your hair and head funk from falling on the screen
-Line the protector up on the screen before removing the film and tape it on one side with a few pieces of Scotch tape
-Also make a "handle" out of tape to put on the top of the protector opposite the taped-down end. This will help with alignment
-Go into the bathroom and clean the screen with a good microfiber cloth. Also clean the front and back protective sheets on the film so there's no dust to come off when you start peeling them. The steam should be enough to wet it. Take one final look
-Peel the protector back and lay it down pulling the taped edge taut to keep it lined up
-Smooth any bubbles out with a credit card BEFORE peeling the top sheet off
IF you do have any dust, use a piece of tape on a corner to lift up the protector and another piece of tape to pick up the dust. If the room is steamy enough and you did a good job of wiping the screen this shouldn't happen.
any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?
If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".
I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...
My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)
brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.
I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.
Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.
.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)
I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.
I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...
After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.
I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.
yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte
Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.
I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL
Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App
I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.
Previously I have only used dry application screen protectors on my phone and I thought I would try the wet application invisible shield because of it being easier to avoid getting dust under the screen protector. I did my best to install it but after a week there are many visible ridges and imperfections in it. Also, there is a rainbow haze/tint that is most noticeable when viewing a white screen. Could this be from improperly installing it or is this how the invisible shield is supposed to be? My other dry screen protectors have been crystal clear on my phone, you couldn't tell they were there at all, the invisible shield is pretty obvious that it is on. Anyone have any advice?
ez4nick said:
Previously I have only used dry application screen protectors on my phone and I thought I would try the wet application invisible shield because of it being easier to avoid getting dust under the screen protector. I did my best to install it but after a week there are many visible ridges and imperfections in it. Also, there is a rainbow haze/tint that is most noticeable when viewing a white screen. Could this be from improperly installing it or is this how the invisible shield is supposed to be? My other dry screen protectors have been crystal clear on my phone, you couldn't tell they were there at all, the invisible shield is pretty obvious that it is on. Anyone have any advice?
Click to expand...
Click to collapse
All the invisible screens I've had become perfect after 3 or 4 days. I would say you either didn't get the screen perfectly clean, or got skin oil on it (did you spray your hands with the liquid)? I don't have one on my N7 (yet) but I have them on 4 or 5 other devices and other than at the edges, you can't see them at all.
That being said, 5 minutes after you put them on you think "Oh s*** there is no way this is going to be ok" but it always is.
wd5gnr said:
All the invisible screens I've had become perfect after 3 or 4 days. I would say you either didn't get the screen perfectly clean, or got skin oil on it (did you spray your hands with the liquid)? I don't have one on my N7 (yet) but I have them on 4 or 5 other devices and other than at the edges, you can't see them at all.
That being said, 5 minutes after you put them on you think "Oh s*** there is no way this is going to be ok" but it always is.
Click to expand...
Click to collapse
It must have been skin oil because I put it on as soon as I took off the plastic packaging that the nexus 7 comes in. I know I sprayed part of my hands but maybe not completely enough. I did email zagg and they said to get a replacement
and try again so hopefully the second time around I'll be able to do better.
I'm surprised you had an issue like that with Zagg. It does sound more like something was off with the protector itself, not how you applied it.
The 'Original Protection' skins from Zagg (and other wet application companies like bodyguardz and bestskinsever) are infamous for having the orange peel effect, rainbow effect and feeling sticky. Should never use these as screen protectors, only for body protection. Even for body protection you're probably better off going for a vinyl wrap like dbrand, skinomi, slickwraps, xgearlive, stickerboy, etc.
The issue with dust under a standard film screen protector is a problem with applying the protector. There are many videos on how to properly apply them.
the one on my phone has a rubbery op texture to it but it works fine. i would think that rainbow would be liquid not yet dry under the protector and a few days sitting would likely clear it up. on a side note i have seen a screen crack under a zagg and a tempered glass protector a well. guess they are mostly just for scratches.
I found this Screen protector on Amazon and what caught my eye is that it wraps around the side of the phone onto the back. at 2 for $15 CDN it was worth trying.
https://www.amazon.ca/gp/product/B06ZZ5Q95L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Application:
It was a little rough, the first one had too much adhesive. While trying to take off the 1st part, the Adhesive side, it actually peeled the 2nd part, the screen protector side off. It took a lot of force to get the Adhesive side off the screen protector itself, that i ended up ruining it. However the 2nd sheet was much easier to peel apart. The Adhesive layer comes off in 3 parts. the Screen and one for each side. Lining it up was fairly easy using the speaker, sensors and camera at the top. Once it was on properly, the sides wrapped around to the back of the phone. It's easier to smooth out the bubbles before putting the sides down.
Looks:
It looks really clear but when at an angle with a light there is an orange peel effect but this may have been from over zealous rubbing to get the bubbles out. Regardless I am quite pleased at how good it looks over other film screen protectors I've used in the past with other phones.
In a Case:
I'm using a a Spigen Tough Armor Case
https://www.amazon.ca/gp/product/B06XP4FP8N/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The screen protector has a very small clearance at all corners, when applied properly the corner of the case won't touch it nor lift it. Since it wraps around it will not lift it from the sides either, or at least shouldn't. I haven't been able to put it though any long term tests but then again i don't plan on taking the case off any more than i really have to.
Now what you all came for, pictures!
http://imgur.com/a/dNSCY
I was about to order the white dome but the review about the prominent lip tuned me to iqshields full body since I will have the phone naked in a holster. I was thinking about the liquid shields next but maybe I'll try this one the next go around if iqshields doesn't work out. Thanks for the find!
I do not see how that wrap around will work. There will be air pocket around the seem .
Sent from my SM-G955U using Tapatalk
I just installed one on mine and I dont think you will find a better one than this at this point in time. Its is case friendly with the 3 cases I have tried at this point. UAG, Spigen Liquid Armour, and a Ringke case, the corners are just to the point where they dont touch the case corners. The only potential area of issue for me is after putting on the screen protector (which for me went flawless after watching the youtube install video) was the area around the Power, Volume and Bixby buttons. After putting the case on it wants to "bubble" a bit in those areas. But once I rolled my finger over the edge, pulling back the case slightly it laid the protector back down. its only been a couple hours but so far so good and Im way happier with this $12 purchase over the 45 whitestone dome that seems to be hit or miss.
Photos were taken with the Spigen Liquid Armour case on. Also taken with my tablet so quality on a couple of them are crappy but you should get a good idea,
tiny70thomas said:
I do not see how that wrap around will work. There will be air pocket around the seem .
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Just imagine starting off at the edge of your phone to getting started and rolling the phone up like playdoh or a joint smoothing along as you go...to easy!
Thinking about ordering a set of these up. I don't like the orange peel look and the top does not look too case friendly. Does the orange peel smooth out over time or is it permanent?
Personally my opinion of this screen protector as I just purchased and returned it to amazon:
-it messes white whites on your screen. They dont look good anymore after I applied the protector.
-While it does wrap around the sides, when you put on the case it still lifts up the corners and creates little air pockets on the sides of the screen
- Extremely orange peel look on this screen protector.
I purchased the IQ shield case friendly updated version and the image quality is WAY better than this ringke one. Using the IQshield I can actually say for certain it feels like there isnt a screen protector on, with my eyes and my fingers. The ringke you can immediately with just your eyes tell there is something off due to what it does with white balance.
My advice is, dont buy the ringke, there are better ones out there.
felloffthetruck said:
Thinking about ordering a set of these up. I don't like the orange peel look and the top does not look too case friendly. Does the orange peel smooth out over time or is it permanent?
Click to expand...
Click to collapse
if it's lined up properly there is a tiny gap between the screen and the case, so it shouldn't lift. I only had it for a few day and it's getting less and less but i don't think it'll go away completely since i was a little over zealous trying But when i'm using it, it's barly noticable if at all. It's only when a light shines on the screen.
It's not for everyone but i feel it does a good enough job for a lot of people to be happy with. The fact that it wraps around is it's main selling point as it will completely protect the edge screen and the case won't lift it up IF applied properly
I applied one to my S8+ this morning. I think it's great for what it is. It's not glass, but it's smooth and feels like nothing is there. There's an ever so slight orange peel look, but I only notice it when looking at the phone from an angle in light, and it doesn't look like I'll have any lifting from my Ringke case. Overall I'm very pleased with it.
Why not try the BestSkinsEver protectors ? I actually have the edge-to-edge one installed w/ a Ringke Slim case and it is not lifting at all. I thought it would, but actually, it isn't. Now, I would like to use my Spigen Slim Armor case but when I put the phone in there, the corners started to lift up. My BSE case-friendly protectors came in but I will probably wait to install it at a later date.
This is the real deal. Hella nice! Works with my rhinoshield as well
Only issue I've found so far is that the side flaps distort the button mechanics. Takes more force to unlock phone and volume up/down
They'll break in tho. Love the combo
As the question in title goes, how many of you here are not using a screen protector on your Oneplus 3/3T? What's your experience so far without one? Any good or bad?
As for me, after going through probably a dozen of screen protectors (both TGSP and films), I have decided that it's time I should just not bother with screen protectors anymore, since none of them provide a good/smooth experience as compared to the beautiful naked screen
What are your thoughts? Vote in the poll, and leave your comments folks!
T.K.B said:
As the question in title goes, how many of you here are not using a screen protector on your Oneplus 3/3T? What's your experience so far without one? Any good or bad?
As for me, after going through probably a dozen of screen protectors (both TGSP and films), I have decided that it's time I should just not bother with screen protectors anymore, since none of them provide a good/smooth experience as compared to the beautiful naked screen
What are your thoughts? Vote in the poll, and leave your comments folks!
Click to expand...
Click to collapse
Ozyl 2.5 works pretty good except for a few rainbows effect at times.
Sent from my SM-G935T using Tapatalk
I felt exactly the same when I bought my 3T, I'm using it without any screen protector. Now it has been 5 months since I got it and it's in perfect condition, no scratch at all, etc. The screen can for sure handle some coins or keys in a pocket without any protection.
weakenfalls01 said:
Ozyl 2.5 works pretty good except for a few rainbows effect at times.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
Yup, I've also used the Orzly v2. Couldn't stand the rainbow effects so removed it
Jackhass said:
I felt exactly the same when I bought my 3T, I'm using it without any screen protector. Now it has been 5 months since I got it and it's in perfect condition, no scratch at all, etc. The screen can for sure handle some coins or keys in a pocket without any protection.
Click to expand...
Click to collapse
My phone pocket is always dedicated for my phone only, never keep anything else like keys/coins with it anyways
T.K.B said:
As the question in title goes, how many of you here are not using a screen protector on your Oneplus 3/3T? What's your experience so far without one? Any good or bad?
As for me, after going through probably a dozen of screen protectors (both TGSP and films), I have decided that it's time I should just not bother with screen protectors anymore, since none of them provide a good/smooth experience as compared to the beautiful naked screen
What are your thoughts? Vote in the poll, and leave your comments folks!
Click to expand...
Click to collapse
Been using mine without a screen protector for around 5 months now. Not a single scratch.
I didn't like how bouncy the original screen guard was so i replaced it with a curved, full cover one. But i didn't like the dotmatrix bull**** so i got rid of it.
I actually don't need a screen guard or a case since i almost never drop anything.
EDIT: I also don't put anything other than my phone and maybe tissues in my pocket.
I used the Orzly Screen protector for about Two weeks in December when I first got the phone. Hated it so threw it away and went without one ever since. I use a Spigen Rugged Armor case and that is it. No nicks or scratches so far. I keep it in a pocket by itself all of the time. I remember dropping it twice but it landed on the corners both times and didn't even damage the case..
I tried Orzly V2 but the rainbow effect in the screen was a s**t... So, i tried the rhinoshield: id does not cover all the screen (1 millimeter on the left and 1 mm on the right) but for the moment is the best protector I've ever seen.
I've been using my phone without a screen protector since I've had it and the only way you can see any tiny little surface scratches is with a head torch on and scrutinising the screen surface. As another member has mentioned, I have been using just a Spigen rugged armour case and that's it. The screen won't get badly scratched if you are careful enough, I'll happily accept some light scratches just as part of the wear and tear process.
I have from today started trying an orzly glass screen protector purely because I have fitted a new phone holder bag thing to my road bike and I feel I mike get scratches on the screen through taking it in and out. The orzly isn't bad, especially for the money, but I can see why people don't like it.
Once a screen protector shows its first bubble i remove it. Annoying otherwise. Screen protectors are just worthless to me. Dont expose your phone screen to anything other than your pocket or finger. Get a case with a lip lift so settings your phone down sets it on its case not the screen. Screen protectors are mostly plastic anyway so you get that nasty plastic feel aside from the feel of a touchscreen panel. The feel of using a touchscreen alone is enough to not want the screen protector for me.
OcazPrime said:
Once a screen protector shows its first bubble i remove it. Annoying otherwise. Screen protectors are just worthless to me. Dont expose your phone screen to anything other than your pocket or finger. Get a case with a lip lift so settings your phone down sets it on its case not the screen. Screen protectors are mostly plastic anyway so you get that nasty plastic feel aside from the feel of a touchscreen panel. The feel of using a touchscreen alone is enough to not want the screen protector for me.
Click to expand...
Click to collapse
Truly spoke my mind there :good: Curved screen nowadays don't deserve to be ruined with screen protectors
T.K.B said:
Truly spoke my mind there :good: Curved screen nowadays don't deserve to be ruined with screen protectors
Click to expand...
Click to collapse
Glad i could help. Last time i used a screen protector it was ruined rifht when i put it on. The reason gorilla Glass exists is to prevents scuff and scratches. Screen protectors give it unnecessary help. Its already protecting against shattering and scratches. If you are scratching the screen with normal use then cut your fingernails. Or take the acrylics off, theyre ridiculous anyway.
I'm without any screen protector as well.
As mentioned the only scratches I see are those tiny ones which can be only seen under direct sunlight or under torch and on specific angle.
My heart stopped one day when I dropped my phone straight onto marble, was already searching for rs10000 but the screen fell flat and absorbed the impact, there was not even a scratch on the screen.
Been using from a month without screen protector or back cover, just a skin.
Going pretty well till now, specially when you put sky blue wallpaper with naked screen it shines quite unique.
Maybe you could try.
I've never been a fan of screen protectors. My phone screen is bare and still is as good as new.
Navi44 said:
I'm without any screen protector as well.
As mentioned the only scratches I see are those tiny ones which can be only seen under direct sunlight or under torch and on specific angle.
My heart stopped one day when I dropped my phone straight onto marble, was already searching for rs10000 but the screen fell flat and absorbed the impact, there was not even a scratch on the screen.
Been using from a month without screen protector or back cover, just a skin.
Going pretty well till now, specially when you put sky blue wallpaper with naked screen it shines quite unique.
Maybe you could try.
Click to expand...
Click to collapse
My goodness!! That's probably the strongest phone screen survival from a fall I have ever heard of! Lucky you indeed
Ahh, I'll take note of the sky blue wallpaper for when I change my wp next time. Cheers
T.K.B said:
My goodness!! That's probably the strongest phone screen survival from a fall I have ever heard of! Lucky you indeed
Ahh, I'll take note of the sky blue wallpaper for when I change my wp next time. Cheers
Click to expand...
Click to collapse
Actually it fell exactly parallel to the floor, if it was tilted even a few degrees, screen would have cracked.
Yeah lucky me
I use mine without a screen protector and case. I use a dbrand skin black/red to cover the back and not get a y scratches. For the screen it doesn't have a scratch since I got it. Whenever I put a screen protector or tempered glass, the screen gets blurry and/or not clear.
alukarulz said:
I use mine without a screen protector and case. I use a dbrand skin black/red to cover the back and not get a y scratches. For the screen it doesn't have a scratch since I got it. Whenever I put a screen protector or tempered glass, the screen gets blurry and/or not clear.
Click to expand...
Click to collapse
Yup, I know. And the screen just does not feel right with a screen protector on!