Related
Well since I just bricked my phone I decided to start this tread. I figured it would be helpful for people to read to keep them from bricking their phone by not following the same process of the unlucky few who have hard bricked their device.
I flashed the Rogue CM9 kernel through Mobile Odin Pro and while on the FB17 leak from Calk which is where I think I made my mistake. when I went to flash CM9 alpha 3.1 it got stuck at install for about 15 minutes before i decided to the battery which I knew was a HORRIBLE idea. When I tried to boot back up all I got was a blue light. My guess is that the phone didn't like that I had a AOSP Kernel while on a TW rom and got confused and froze because it didn't know what to do next. The good news it that sprint is ever so gracious to provide me with a new phone coming in the mail on Thursday since they don't have any in stock. I just told them I got a update and when it installed it wouldn't boot back up and I should hopefully be back in business with some CM9 yumminess later this week thank the cellular gods for insurance!
Some users are reporting that mobiletechvideos.com is somewhere you can send your phone too have it brought back from the dead.
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
So I just got my second e4gt yesterday from hard bricking mine by flashing CM9 alpha 3 then flashing cwm touch recovery after I restored a nandroid of el29 it just wouldn't boot back
Sent from my SPH-D710 using XDA App
digitalcrash said:
So I just got my second e4gt yesterday from hard bricking mine by flashing CM9 alpha 3 then flashing cwm touch recovery after I restored a nandroid of el29 it just wouldn't boot back
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Everyone should hear this LEAVE CWM TOUCH ALONE ...... DON'T EVER TOUCH IT ... it is most of what is bricking these phones ... Unless they fix it don't use it for this phone .... How many people have to brick because of it .... Use the trusted acs rouge or cwm but not the touch
Sent from my SPH-D710 using xda premium
Somebody should make a sticky thread that warns people not to install the touch recovery from rom manager for this device. I notice everyone who hard bricked their device was by installing touch recovery through rom manager while using the leak ics roms or cm9
Sent from my SPH-D710 using xda premium
I posted it all over shabby's thread.....DONT USE TOUCH RECOVERY.
I learned my lesson with touch recovery and I will never use it again
Sent from my SPH-D710 using XDA App
correct me if im wrong but unless you actually burnt the processor out or dropped it in water ...couldn't u use a usb jig to just put you in download mode and odin from there worked on my fist galaxy s and fortunately i haven't had to use one sense ..and fyi really cheap and easy to make
sfal8705 said:
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
Click to expand...
Click to collapse
thats what happened to me as well after an hour of playing with it they decided to replace it.
the jig does nada for it just to answer that question goes
and I wasn't using touch recovery I was using rouge recovery for CM9... I think I screwed up trying to flash using the cm9 recoveery for a tw rom...
sergioperalta81 said:
correct me if im wrong but unless you actually burnt the processor out or dropped it in water ...couldn't u use a usb jig to just put you in download mode and odin from there worked on my fist galaxy s and fortunately i haven't had to use one sense ..and fyi really cheap and easy to make
Click to expand...
Click to collapse
No sometimes there are hard bricks that don't respond to jig and only fix is a jtag ....happened alot with flashing international ROM ....bootloader would disable the USB port ....
Sent from my SPH-D710 using xda premium
sfal8705 said:
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
Click to expand...
Click to collapse
Tell them to put the chip in a different housing and see if it works, if its the screen it would work in a different housing. I did that with my og epic..
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
We really should make a sticky, or a thread that says DONT USE TOUCH RECOVERY!!! and just keep bumping it up to the top.
Yup CWM Touch killed my evo during restore and data wipe.. 1st it soft brick my phone and had to factory restore a .tar and now it finally killed my phone. gotta pick up my replacement tmmrow
And yes i was using a ICS FBXX rom during this
What is the recommended way to flash to cm9 3.1 from the calks ics fb17 leak without bricking the phone?
Sent from my SPH-D710 using Tapatalk
albe070 said:
What is the recommended way to flash to cm9 3.1 from the calks ics fb17 leak without bricking the phone?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Flash Miui Rom then flash CM9. Dont use CWM touch at all.. just use a basic recovery like rogue or stock CWM
Yep. Touch recovery seems to be the common denominator amongst the bricked phones. I was lucky enough to just get mine swapped out at a Sprint Service Center. I certainly won't be using CWM Touch for anything ever again.
blackroseMD1 said:
Yep. Touch recovery seems to be the common denominator amongst the bricked phones. I was lucky enough to just get mine swapped out at a Sprint Service Center. I certainly won't be using CWM Touch for anything ever again.
Click to expand...
Click to collapse
I think the culprit is using an aosp recovery while on a TWIZ ROM... I would avoid that because I bet that is the issue...
It doesnt seem to be just the Clock Work Mod Touch. It would seem that sbrissen thinks that in ICS the data partition or blocks are slightly different and this is causing errors when flashing ICS or back to GB from ICS. So id say for now stay away from ICS in general until this is completely sorted.
HaiKaiDo said:
It doesnt seem to be just the Clock Work Mod Touch. It would seem that sbrissen thinks that in ICS the data partition or blocks are slightly different and this is causing errors when flashing ICS or back to GB from ICS. So id say for now stay away from ICS in general until this is completely sorted.
Click to expand...
Click to collapse
so what do you say people do who have flash ICS and want to get back to GB without screwing up.. just use a .tar?
You can add me to the list...also was using touch recovery. I wonder what Sprint/Samsung is thinking about all of our E4GTs coming in for repair hahaha
Sent from my (temp) Desire HD using XDA App
YoungAceAtlanta said:
so what do you say people do who have flash ICS and want to get back to GB without screwing up.. just use a .tar?
Click to expand...
Click to collapse
Yes. I odin back to el29 stock with root and then install cwm rogue then restore a previous backup. The process is bit much but better to be safe than sorry
Sent from my SPH-D710 using xda premium
first time I flashed aokp it was all gravy until I tried to boot into recovery, I got the Android System Recovery. I got scared and I read around and ended up odin'ing back to stock and flashing another rom.
I really like aokp so I wanted to try it again. I made very sure I followed the directions, I did not flash from an ICS recovery. I try booting into recovery to see if it worked this time and sure enough, there is android system recovery again, what am I doing wrong?
I searched for this too and saw that someone said to reinstall the packages and reboot, and do it again or something like that and it would boot into CWM, but that was for a different phone so I wasnt gonna try that.
Can I just run the eg4tauto.zip and isntall el26 with cwm to get recovery back and be good, or do I need to odin?
Any help would be greatly appreciated.
krook250 said:
first time I flashed aokp it was all gravy until I tried to boot into recovery, I got the Android System Recovery. I got scared and I read around and ended up odin'ing back to stock and flashing another rom.
You need to read the OP in the thread.
I really like aokp so I wanted to try it again. I made very sure I followed the directions, I did not flash from an ICS recovery. I try booting into recovery to see if it worked this time and sure enough, there is android system recovery again, what am I doing wrong?
I searched for this too and saw that someone said to reinstall the packages and reboot, and do it again or something like that and it would boot into CWM, but that was for a different phone so I wasnt gonna try that.
Can I just run the eg4tauto.zip and isntall el26 with cwm to get recovery back and be good, or do I need to odin?
Any help would be greatly appreciated.
Click to expand...
Click to collapse
There is no cwm on aokp codename etc for a reason ....to stop people from bring stupid and bricking ....don't use a ics kernel with cwm for anything .... Use el26 to flash any ROM u need and when you want to go to another use mobile Odin or regular Odin to flash el26 kernel again and boot into cwm .... El26 is a GB kernel and won't boot a ics ROM ....then you can flash anything GB or ics
Sent from my SPH-D710 using Tapatalk 2 Beta-5
thanks for your response, but I think I am more confused, I was trying to flash a different modem. when I am not connected to 4g, my data is terrible, with 4g, I am all good. I was going to try a different modem. In the OP, for modems it says this:
Modems
FC18 Modem: DOWNLOAD
Flash through Stock CWM Recovery OR pull the modem.bin out of the .zip file and flash in the Phone option in Odin(mobile Odin doesnt flash modem)
Click to expand...
Click to collapse
You probably should flash back to a touch wiz ROM.....you can Odin the el29 tar or one click from sfhub .
http://forum.xda-developers.com/showthread.php?t=1433101
you can Odin the modem and then update profile and prl in tw then you can flash the el26 cwm http://www.mediafire.com/?hkydca9ob98z89m
and go back to aokp or codename etc
Sent from my SPH-D710 using Tapatalk 2 Beta-5
sorry if this is a dumb questions, but what if I get stuck in a boot loop and I have no recovery? just go into download mode and odin my way out?
one other thing, I started flashing ics roms with venum ice and flashed to mijjz ics and caulks and others and never had a problem, was I just lucky so far? I don't recall mijjz or venum's installation instructions saying I needed to odin back to stock before flashing. Sorry for the noob questions, but I've read a bunch and just trying to piece it all together. I read so I don't brick, but then I end up with more questions.
I'm also wondering about this I've spent a good deal of time trying to put the time line of the et4g together and I think I got most of it....just got my shiny white et4g two days ago my wife has had hers. for about 4 mo. shes much less fearless when it comes to flashing on this phone. (however shes settled in on build 27 of aokp, and I doubts shes gonna be flashing anytime too soon.) I'm coming over from my NS4G which always had clear cut rules to flashing! CWM all day. The only thing(s) I ever had to watch for was is it aosp, or not? An do I do a wipe or not? (I got in the habit of wiping just to be safe, and man I flash with the best of them! At least 2 times a week)
OK, OK sorry about the ramblings of my history my real questions are:
A) So Im sitting on alpha 2 of CM9 (nice piece of work I must Say) I made sure I was in the green, and had everything lined up to flash this one! went smooth of course. It wasn't until after my flash that I tried to make a nandroid....I get why theres no clockwork! but I'm totally clueless on how to back up with out it, or if you even can make one with stock recovery?
Can I keep CM9, and flash a kernel with rouge recovery to the make a nandroid? Or is there another way to go about this (I like to make nandroid often as a easy way to restore data after I play around with stuff and brake Wifi or what have you, and scrap unneeded back ups as I find out what I can and cant do with MY phone.)
I really really love Cryogen 9 (yeah its not as far along as I would like it to be ex- cm7 for the ns4g or kangs aokp builds) But there a team I'm familiar with. An I like there stuff, but I'm really nerves about where I go from here if/when i decide to change to something else.What are the guide lines for flashing from cm9 to say another ICS build? and is CM9 compatible with other kernels or only the one that is came packed with?
B) can someone straight up make a new clean thread with proper flashing tech. and no filler or out dated info then the have a mod stick it and close it>>>>simplify this for those of us that know what were doing....until things go funk for some reason, or another and that leaves ,us we are completely lost!
Well after wrighting my first novel (joke haha) I would like to thank everyone thats put up there time and money to make phones OURS and more powerful then what hit the shelfs an allowing me to get the most customized electronic device I have ever seen with the exception of my PC. Clapping
If you want to backup your system with the stock cm9a2 kernel, just mobile odin/odin el26 kernel/recovery, boot into cwm, flash stock cm9a2 kernel, now while still in cwm do a nand backup. That way it will be a full backup.
Sent from my SPH-D710 using xda premium
I know I'm a little late, but there is CWM for the AOKP rom. The FC07 BootImg on the e4gtuato.zip file worked fine for me on the older version which was based off of FC15.
faceyourfaces said:
I know I'm a little late, but there is CWM for the AOKP rom. The FC07 BootImg on the e4gtuato.zip file worked fine for me on the older version which was based off of FC15.
Click to expand...
Click to collapse
I would try that, but these folks have me scurred about using cwm within aokp. I have flashed between caulks ics/venum ice, anakonda/mijjz goodness,xplod mini and a couple other ICS roms all from cwm with absolutely no issues so far.
I am thoroughly confused right now. I am on aokp build 28 with a few significant issues and not sure what what direction to go next. I know how to get out of aokp safely now, but not sure which rom i want to go to, little issues with each that I dont know how to fix yet.
krook250 said:
I would try that, but these folks have me scurred about using cwm within aokp. I have flashed between caulks ics/venum ice, anakonda/mijjz goodness,xplod mini and a couple other ICS roms all from cwm with absolutely no issues so far.
I am thoroughly confused right now. I am on aokp build 28 with a few significant issues and not sure what what direction to go next. I know how to get out of aokp safely now, but not sure which rom i want to go to, little issues with each that I dont know how to fix yet.
Click to expand...
Click to collapse
Read this thread it happens when using ics kernel with cwm .and then tell us u want to use cwm with a ics kernel.....it bricks phones please read it and understand
http://forum.xda-developers.com/showthread.php?t=1525495
That's why people are using Odin to get el26 GB on their phones to flash with
Sent from my SPH-D710 using Tapatalk 2 Beta-5
krook250 said:
I would try that, but these folks have me scurred about using cwm within aokp. I have flashed between caulks ics/venum ice, anakonda/mijjz goodness,xplod mini and a couple other ICS roms all from cwm with absolutely no issues so far.
I am thoroughly confused right now. I am on aokp build 28 with a few significant issues and not sure what what direction to go next. I know how to get out of aokp safely now, but not sure which rom i want to go to, little issues with each that I dont know how to fix yet.
Click to expand...
Click to collapse
If you have been having luck thats fine but I can not see how you have not noticed int eh OP of the ICS roms and the OP of the recoveries it gives you instructions on what to do and what not to do. Also there are quite a few threads in here about the horror stories of the now infamous blue light of death. Once again if you have escaped this then maybe you should tell us your secret to success. Honestly the few extra steps it takes to ensure your phone stays your phone is well worth it.
Like Epix has posted please read up a little just incase something happens to you or anyone else who claims no problems so you know how to help yourself. Hopefully we wont have to see a I Think I just bricked my Phone thread from you.
Odin EL26 CWM and basically everything else stays the same after that... except you would need to either reflash the ICS rom you are using or have a copy of the kernel readily available
Epix4G said:
Read this thread it happens when using ics kernel with cwm .and then tell us u want to use cwm with a ics kernel.....it bricks phones please read it and understand
http://forum.xda-developers.com/showthread.php?t=1525495
That's why people are using Odin to get el26 GB on their phones to flash with
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I've read that, hence the reason for my posts. I am not going to load cwm and start flashing away. From aokp, I will odin back to GB before I flash any new ICS roms. I also won't be flashing between other ICS roms, even ones I have done before with no problems. I odin every time now, but it is putting a serious damper on my flashing addiction.
I could flash 3 roms in the time it takes me to odin back to GB, lol!
krook250 said:
I've read that, hence the reason for my posts. I am not going to load cwm and start flashing away. From aokp, I will odin back to GB before I flash any new ICS roms. I also won't be flashing between other ICS roms, even ones I have done before with no problems. I odin every time now, but it is putting a serious damper on my flashing addiction.
I could flash 3 roms in the time it takes me to odin back to GB, lol!
Click to expand...
Click to collapse
I don't Odin to stock all the time I mobile Odin the el26 cwm kernel and then boot strait into recovery as the GB kernel won't boot the ics ROM and then I flash from there but I also u caulks format all too ....
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Epix4G said:
I don't Odin to stock all the time I mobile Odin the el26 cwm kernel and then boot strait into recovery as the GB kernel won't boot the ics ROM and then I flash from there but I also u caulks format all too ....
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Thus is what I used to do at first myself I would flash the CWM kernel then just nandroid back my old rom and keep it moving. It just basically seems that as long as you do everything in a GB kernel based recovery as long as it is not the Touch recovery you should be OK
Sent from my SPH-D710 using Tapatalk
I am gonna look into mobile Odin so i don't have to be sitting at a PC to do work. So if I go back to gb and get my modem biz straightened out then flash an ics rom, my modem changes will stick?
It seems like this issue is isolated to sprint only, right? Much buddy on att is flashing ics over ics like crazy. And he said he hasn't seen anything like this over there.
Sent from my SPH-D710 using XDA
I've only used the ICS recovery on AOKP to change modems and flash GB roms because it probably wouldn't work too well with other ICS roms.
krook250 said:
I am gonna look into mobile Odin so i don't have to be sitting at a PC to do work. So if I go back to gb and get my modem biz straightened out then flash an ics rom, my modem changes will stick?
It seems like this issue is isolated to sprint only, right? Much buddy on att is flashing ics over ics like crazy. And he said he hasn't seen anything like this over there.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
UPDATE: It seems that using recovery on Touchwiz-based ICS roms (like Blend ICS) is safe but it is much more dangerous on roms built from stock (like CM9). Your buddy must be using roms based off of leaked builds and not stock AOSP.
------------------
If you flashed back to Gingerbread to change your modems and installed an Ice Cream Sandwich rom over it the modem should stay.
faceyourfaces said:
I've only used the ICS recovery on AOKP to change modems and flash GB roms because it probably wouldn't work too well with other ICS roms.
UPDATE: It seems that using recovery on Touchwiz-based ICS roms (like Blend ICS) is safe but it is much more dangerous on roms built from stock (like CM9). Your buddy must be using roms based off of leaked builds and not stock AOSP.
------------------
If you flashed back to Gingerbread to change your modems and installed an Ice Cream Sandwich rom over it the modem should stay.
Click to expand...
Click to collapse
It has nothing to do with that it's the ics kernel and aosp and tw is using the same kernel but with minor changed , because there is no source released there can't be a built from source aosp kernel ....there is no safe ics kernel with cwm when source is released they will fix it, but the note has the same problem
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Epix4G said:
It has nothing to do with that it's the ics kernel and aosp and tw is using the same kernel but with minor changed , because there is no source released there can't be a built from source aosp kernel ....there is no safe ics kernel with cwm when source is released they will fix it, but the note has the same problem
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
The recovery that came with Blend ICS worked fine for me though. Trying to flash using recoveries on other ICS roms gave me soft bricks. Would you have any idea how Blend worked for me?
faceyourfaces said:
The recovery that came with Blend ICS worked fine for me though. Trying to flash using recoveries on other ICS roms gave me soft bricks. Would you have any idea how Blend worked for me?
Click to expand...
Click to collapse
It is the same recovery and soft bricks ate usually from not wiping right....but use that kernel with cwm and wipe data and your risking a b.l.o.d. It doesn't take much ....the thing is Samsung changed a couple things with how the data partition is handled and they also changed a couple other partitions and sfhub said he thinks it writes over two of the partitions at the same time when wiping and makes both unusable creating a brick
... writers thing is it damages the emmc somehow and makes it even impossible to jtag it .... Which should really never happen
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Epix4G said:
It is the same recovery and soft bricks ate usually from not wiping right....but use that kernel with cwm and wipe data and your risking a b.l.o.d. It doesn't take much ....the thing is Samsung changed a couple things with how the data partition is handled and they also changed a couple other partitions and sfhub said he thinks it writes over two of the partitions at the same time when wiping and makes both unusable creating a brick
Click to expand...
Click to collapse
So the best thing I guess would be to just to avoid ICS recoveries all around.
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495
Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..
nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium
well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!
I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!
I've read through most of these threads an I'm pretty sure there is no CWM for ICS for the Epic 4G Touch. Is this correct?
I have the s2 for tmobile and it is practically unbrickable compared to this phone. My friend has the Epic and I installed ICS AOKP. It is way more difficult on his phone. I don't understand why it is so different. Given, we have different hardware, but neither one of us have the source for ICS or kernel. But I do have the same CWM no matter what rom I'm on.
1. Is it possible to have CWM on the Epic 4G Touch?
2. His ext_sdcard is not showing up. How to I make it work? I tried DirectoryBind to no avail. Maybe I'm doing something wrong.
3. Can i flash zips in ICS recovery? Ive never seen the recovery it put me in before.
4. Am I missing something?
I was under time costraints when helping him out and honestly I'm just happy i got AOKP running on his phone without any issues.
I appreciate all the work everyone has done so please don't take anything I said the wrong way.
Thanks in advance an i look firward to hearing from anyone...
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
We need ICS kernel source before we can have a proper CWM kernel for ICS.
Sent from my SPH-D710 using XDA
We had CWM on ICS for a little bit, but it was causinga ton of bricks because the partitions are handled differently in ICS. I wouldn't attempt to flash anything in ICS recovery because you risk bricking the device. We likely won't have CWM for it until kernel source drops.
If you need to flash something, the best way to do it is to Odin back to EL26, install CWM, and flash everything (ROM, kernel, modem etc.) in one recovery session. Most of the threads for AOSP ICS roms have specific flashing instructions in the first post.
Sent while hanging with that really hoopy frood Ford Prefect.
blackroseMD1 said:
We had CWM on ICS for a little bit, but it was causinga ton of bricks because the partitions are handled differently in ICS. I wouldn't attempt to flash anything in ICS recovery because you risk bricking the device. We likely won't have CWM for it until kernel source drops.
If you need to flash something, the best way to do it is to Odin back to EL26, install CWM, and flash everything (ROM, kernel, modem etc.) in one recovery session. Most of the threads for AOSP ICS roms have specific flashing instructions in the first post.
Sent while hanging with that really hoopy frood Ford Prefect.
Click to expand...
Click to collapse
Thanks for the info. I guess I'm spoiled on my T989! We dont have source either. We didnt even have a proper leak til yesterday, but ICS runs great because our devs are ridiculous.
I have him running FD26 so I will flash back el26 for the mods. I left his baseband alone and it seems to be running fine.
Thanks again. I appreciate the help
Edit: One more thing. I need to reset the flash counter and remove the yellow triangle every time i go back to cwm right?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
You don't need to remove it, it's really just personal preference and if it makes you happy you can, lol.
Sent from my SPH-D710 using Tapatalk
Sn1per 117 said:
You don't need to remove it, it's really just personal preference and if it makes you happy you can, lol.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Lol! Its just so ugly. I wish there was a kernel for the Epic that had a cool bootanimation. My friend saw my. Darkside kernel boot and wants it now. He doesn't understand because he thinks our phones are identical.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Look here guys http://forum.xda-developers.com/showthread.php?p=25659129#post25659129
I noticed the repacked kernel might not work with AOSP though. I think that I will flash him back to GB until source is released. I don't want want him to accidentally brick.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
xyros7 said:
I noticed the repacked kernel might not work with AOSP though. I think that I will flash him back to GB until source is released. I don't want want him to accidentally brick.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I've been mostly staying on gb roms just for stability and battery life. As long as you read the instructions and don't try to be insanely flash happy you'll be fine.
Sent from my SPH-D710 using Tapatalk
Hey guys,
I purchased this phone today, went home and immediately rooted the phone.
Everything went fine, until I tried flashing a custom recovery than the problem occurred,
I'm on a FL24 basebad with 4.0.4, and every time my phone boots 10 seconds later it restarts.
What's going on?
I rooted the phone with Odin, once rooted I installed mobile Odin and flashed a customer "Kernel / Recovery" now the phone constantly reboots.
Install the stock kernel.
Sent from my SPH-D710 using xda premium
Well the kernel I flashed was 0.4.0, I heard that one has reboot issues so I flashed 0.3.0 and it's working great.
The only thing I can't figure out now is how to flash CWM, keeps taking me to the download screen when booting into "recovery".
Trytohaxme said:
Well the kernel I flashed was 0.4.0, I heard that one has reboot issues so I flashed 0.3.0 and it's working great.
The only thing I can't figure out now is how to flash CWM, keeps taking me to the download screen when booting into "recovery".
Click to expand...
Click to collapse
To boot to recovery
Vol up plus power and hold
Once the splash screen shows, release power and continue to hold Vol up.
You will get to recovery.
Sent from my SPH-D710 using xda premium
I must not have been holding it long enough, appreciate the reply.
How come E4GT ROMS are so large in size, back when I had an EVO and Optimus roms were about 100MB, E4GT are about 500mb?
Well sounds like the recovery was either flashed wrong or is defective for whatever reason..
Here is how to root that version by qb77king. He is very good http://www.youtube.com/watch?v=gqmKN2ewatk&feature=youtube_gdata_player.....
here is a video for the recovery http://www.youtube.com/watch?v=Kb63ldWtnoM&feature=youtube_gdata_player
So I'd like to help but need to know more info to go by. Did you enable USB debugging when you flashed the recovery? Anyways go ahead and go to stockroms.net. there you can find a stock ROM to flash your phone with unless its virgin or boost.
I recommend just getting stock jellybean or wild for the night cyanogen.. I know you just bought it but I can tell you its worth it ICS is horrible,Too many problems. You can actually find a jellybean ROM that is already rooted when u flash it.. Anyways download the android root toolkit from the market... This will save your phone's root
Sent from my SPH-D710 using xda premium
rockingfreely said:
Well sounds like the recovery was either flashed wrong or is defective for whatever reason..
Here is how to root that version by qb77king. He is very good http://www.youtube.com/watch?v=gqmKN2ewatk&feature=youtube_gdata_player.....
here is a video for the recovery http://www.youtube.com/watch?v=Kb63ldWtnoM&feature=youtube_gdata_player
So I'd like to help but need to know more info to go by. Did you enable USB debugging when you flashed the recovery? Anyways go ahead and go to stockroms.net. there you can find a stock ROM to flash your phone with unless its virgin or boost.
I recommend just getting stock jellybean or wild for the night cyanogen.. I know you just bought it but I can tell you its worth it ICS is horrible,Too many problems. You can actually find a jellybean ROM that is already rooted when u flash it.. Anyways download the android root toolkit from the market... This will save your phone's root
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No. Already fixed.
Don't listen to this guy.
Sent from my SPH-D710 using xda premium
Hey Trytohoaxme. So as of right now there is no cmw for ICS. There is Agat recovery which is based off of cwm that is for either a ICS ROM or jelly bean ROM. I have cmw that is a jingerbread kernal that interfaces with CyanogenMod 10.1 which has 4.2.2 jellybean. If you flash clockworkmod it won't work with a stock rom your phone won't be able to boost up..
Graydiggy u are pretty rude. I hope to god your mom raised you better. Show some respect on this forum, XDA is a place for positive feedback, not negative people who criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
rockingfreely said:
Graydiggy u are pretty rude. ...criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Who's conceited?
I'm pretty sure he's just trying to help and avoid misinformation, no need to get offended, bud... And the op stated the issue was already resolved.
He never asked about cwm specifically, just a custom recovery. On TW ICS I've used Agat's, Ruj's, and Slesh's kernels/recoveries without issue. There's really no need for EL26/CWM tar unless you want to play it safe (which i do) going from TW to AOSP or vise versa.
And yes stock TW ROMs are huge. AOSP ROMs end up around 240 megs (give or take) including Gapps.
Trolling from my Cricket-flashed Galaxy S2 E4GT using Tapatalk 2
rockingfreely said:
Hey Trytohoaxme. So as of right now there is no cmw for ICS. There is Agat recovery which is based off of cwm that is for either a ICS ROM or jelly bean ROM. I have cmw that is a jingerbread kernal that interfaces with CyanogenMod 10.1 which has 4.2.2 jellybean. If you flash clockworkmod it won't work with a stock rom your phone won't be able to boost up..
Graydiggy u are pretty rude. I hope to god your mom raised you better. Show some respect on this forum, XDA is a place for positive feedback, not negative people who criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Well when people like you give incorrect information like you are currently doing, or makes everything more complicated than it should be, again, something you are doing, I will be rude. ICS has had source for a very very long time and has had a CWM for a long time. JB does not. I have been here for a long time and there is a reason I have recognized contributor. I may be rude, but when someone else risks someone's expensive phone, sometimes it takes being rude. If you can't handle it, oh well.
The reason for my response was because the issue was solved and the stockroms.net is not a site that I trust. We have a repository for all of our stock ROMs.
Sent from my SPH-D710 using xda premium
I already upgraded from ICS FL24 to JB GB27.
The problem I have as of now is, I don't know which roms are compatible with my device?
I'm on JB 4.1.2 GB27, does that mean I can only flash GB27 roms?
Trytohaxme said:
I already upgraded from ICS FL24 to JB GB27.
The problem I have as of now is, I don't know which roms are compatible with my device?
I'm on JB 4.1.2 GB27, does that mean I can only flash GB27 roms?
Click to expand...
Click to collapse
You can flash any ROM for the E4GT... You are in the right forums for that.
Oh okay, I was asking because the thread title of most ROMs say "[ROM] FL24 Kuban Kernal" ETC..
Since I'm on GB24, I can still use EL26 ROMs and all?
Trytohaxme said:
Oh okay, I was asking because the thread title of most ROMs say "[ROM] FL24 Kuban Kernal" ETC..
Since I'm on GB24, I can still use EL26 ROMs and all?
Click to expand...
Click to collapse
Just read the instructions for each ROM. They will tell you exactly what is needed.
Sent from my SPH-D710 using xda app-developers app