Well since I just bricked my phone I decided to start this tread. I figured it would be helpful for people to read to keep them from bricking their phone by not following the same process of the unlucky few who have hard bricked their device.
I flashed the Rogue CM9 kernel through Mobile Odin Pro and while on the FB17 leak from Calk which is where I think I made my mistake. when I went to flash CM9 alpha 3.1 it got stuck at install for about 15 minutes before i decided to the battery which I knew was a HORRIBLE idea. When I tried to boot back up all I got was a blue light. My guess is that the phone didn't like that I had a AOSP Kernel while on a TW rom and got confused and froze because it didn't know what to do next. The good news it that sprint is ever so gracious to provide me with a new phone coming in the mail on Thursday since they don't have any in stock. I just told them I got a update and when it installed it wouldn't boot back up and I should hopefully be back in business with some CM9 yumminess later this week thank the cellular gods for insurance!
Some users are reporting that mobiletechvideos.com is somewhere you can send your phone too have it brought back from the dead.
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
So I just got my second e4gt yesterday from hard bricking mine by flashing CM9 alpha 3 then flashing cwm touch recovery after I restored a nandroid of el29 it just wouldn't boot back
Sent from my SPH-D710 using XDA App
digitalcrash said:
So I just got my second e4gt yesterday from hard bricking mine by flashing CM9 alpha 3 then flashing cwm touch recovery after I restored a nandroid of el29 it just wouldn't boot back
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Everyone should hear this LEAVE CWM TOUCH ALONE ...... DON'T EVER TOUCH IT ... it is most of what is bricking these phones ... Unless they fix it don't use it for this phone .... How many people have to brick because of it .... Use the trusted acs rouge or cwm but not the touch
Sent from my SPH-D710 using xda premium
Somebody should make a sticky thread that warns people not to install the touch recovery from rom manager for this device. I notice everyone who hard bricked their device was by installing touch recovery through rom manager while using the leak ics roms or cm9
Sent from my SPH-D710 using xda premium
I posted it all over shabby's thread.....DONT USE TOUCH RECOVERY.
I learned my lesson with touch recovery and I will never use it again
Sent from my SPH-D710 using XDA App
correct me if im wrong but unless you actually burnt the processor out or dropped it in water ...couldn't u use a usb jig to just put you in download mode and odin from there worked on my fist galaxy s and fortunately i haven't had to use one sense ..and fyi really cheap and easy to make
sfal8705 said:
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
Click to expand...
Click to collapse
thats what happened to me as well after an hour of playing with it they decided to replace it.
the jig does nada for it just to answer that question goes
and I wasn't using touch recovery I was using rouge recovery for CM9... I think I screwed up trying to flash using the cm9 recoveery for a tw rom...
sergioperalta81 said:
correct me if im wrong but unless you actually burnt the processor out or dropped it in water ...couldn't u use a usb jig to just put you in download mode and odin from there worked on my fist galaxy s and fortunately i haven't had to use one sense ..and fyi really cheap and easy to make
Click to expand...
Click to collapse
No sometimes there are hard bricks that don't respond to jig and only fix is a jtag ....happened alot with flashing international ROM ....bootloader would disable the USB port ....
Sent from my SPH-D710 using xda premium
sfal8705 said:
I got the exact same thing but my sprint reps think that the screen went out and are trying to replace it.
Click to expand...
Click to collapse
Tell them to put the chip in a different housing and see if it works, if its the screen it would work in a different housing. I did that with my og epic..
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
We really should make a sticky, or a thread that says DONT USE TOUCH RECOVERY!!! and just keep bumping it up to the top.
Yup CWM Touch killed my evo during restore and data wipe.. 1st it soft brick my phone and had to factory restore a .tar and now it finally killed my phone. gotta pick up my replacement tmmrow
And yes i was using a ICS FBXX rom during this
What is the recommended way to flash to cm9 3.1 from the calks ics fb17 leak without bricking the phone?
Sent from my SPH-D710 using Tapatalk
albe070 said:
What is the recommended way to flash to cm9 3.1 from the calks ics fb17 leak without bricking the phone?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Flash Miui Rom then flash CM9. Dont use CWM touch at all.. just use a basic recovery like rogue or stock CWM
Yep. Touch recovery seems to be the common denominator amongst the bricked phones. I was lucky enough to just get mine swapped out at a Sprint Service Center. I certainly won't be using CWM Touch for anything ever again.
blackroseMD1 said:
Yep. Touch recovery seems to be the common denominator amongst the bricked phones. I was lucky enough to just get mine swapped out at a Sprint Service Center. I certainly won't be using CWM Touch for anything ever again.
Click to expand...
Click to collapse
I think the culprit is using an aosp recovery while on a TWIZ ROM... I would avoid that because I bet that is the issue...
It doesnt seem to be just the Clock Work Mod Touch. It would seem that sbrissen thinks that in ICS the data partition or blocks are slightly different and this is causing errors when flashing ICS or back to GB from ICS. So id say for now stay away from ICS in general until this is completely sorted.
HaiKaiDo said:
It doesnt seem to be just the Clock Work Mod Touch. It would seem that sbrissen thinks that in ICS the data partition or blocks are slightly different and this is causing errors when flashing ICS or back to GB from ICS. So id say for now stay away from ICS in general until this is completely sorted.
Click to expand...
Click to collapse
so what do you say people do who have flash ICS and want to get back to GB without screwing up.. just use a .tar?
You can add me to the list...also was using touch recovery. I wonder what Sprint/Samsung is thinking about all of our E4GTs coming in for repair hahaha
Sent from my (temp) Desire HD using XDA App
YoungAceAtlanta said:
so what do you say people do who have flash ICS and want to get back to GB without screwing up.. just use a .tar?
Click to expand...
Click to collapse
Yes. I odin back to el29 stock with root and then install cwm rogue then restore a previous backup. The process is bit much but better to be safe than sorry
Sent from my SPH-D710 using xda premium
Related
Hey everyone,
I tried flashing a new rom from my phone earlier and I think it may not have flashed successfully. I hit reboot after it was finished installing but my screen remains blank and the blue led remains lit. I have tried battery pulling and using the button combos to go into either recovery or download mode but I haven't had any luck. When I use the buttons to go into recovery or download mode the led blinks for a second as though it is recognizing the command but the screen remains blank and the led stays solid blue. I have tried hooking the phone up to my computer and ODIN doesn't seem to recognize it either. Does anyone have any ideas or can anyone confirm if I am bricked? I would really appreciate some help. I have had this phone since the day it came out and have messed around with it quite a bit but I am out of ideas and have always been able to either boot into recovery or download mode Thanks in advance!
I would try a jig first. u can get one off ebay or make one. also if that doesn't work jtag maybe be your only option. hooe you can bring it to life man
What did you flash ? I was drunk as hell last night flashing a kernel in Odin in the phone section and wondering why it would never finish until I realized it was in phone not Pda .... I did it like 3 times before I finally fixed it got Cm7 back on it with no Baseband ... Funny now but odined a radio and all was fine.... The only thing that will usually F this phone up is flashing bootloader from int. Version that's a instant brick not fixable
Sent from my SPH-D710 using xda premium
I flashed the "tbm" FB17 rom which just came out today. I downloaded it directly to my phone so there is a possibility it could have been a bad download. Prior to that I was using Calkulin's stock FB17 deodexed rom which was released yesterday.
by chance did you use the touch recovery at all? lots of people have been bricking their devices lately using that.
gernade23 said:
I flashed the "tbm" FB17 rom which just came out today. I downloaded it directly to my phone so there is a possibility it could have been a bad download. Prior to that I was using Calkulin's stock FB17 deodexed rom which was released yesterday.
Click to expand...
Click to collapse
Get a jig and you'll get back into Odin
Sent from my SPH-D710 using xda premium
any suggestions for someone that can get into odin, but phone stuck in SGSII screen bootloop?
i flashed the calk's fb17 deodex version, and it started this boot loop. i pulled battery, and odin'd back to stock el29. still stuck in sgsii bootloop. it's seems to be acting like e: partition doesn't exist.
i have this problem as well
dgn_sandibalz said:
any suggestions for someone that can get into odin, but phone stuck in SGSII screen bootloop?
i flashed the calk's fb17 deodex version, and it started this boot loop. i pulled battery, and odin'd back to stock el29. still stuck in sgsii bootloop. it's seems to be acting like e: partition doesn't exist.
Click to expand...
Click to collapse
Go get sfhubs restore one click. That ought to fix it.
Sent from my SPH-D710 using XDA App
patrao_n said:
by chance did you use the touch recovery at all? lots of people have been bricking their devices lately using that.
Click to expand...
Click to collapse
I did and I bricked my phone. I am so pissed.
Jig won't work. I am so screwed.
Like fully HARD bricked. I hope there is a fix...
zzelinka said:
I did and I bricked my phone. I am so pissed.
Jig won't work. I am so screwed.
Like fully HARD bricked. I hope there is a fix...
Click to expand...
Click to collapse
jtag or just tell Sprint you were charging it and now it won't come on...
Sent from my SPH-D710 using xda premium
Not sure if this will work for you, but ill still send this link to you or those who might use this service.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Sent from my SPH-D710 using XDA App
Epix4G said:
jtag or just tell Sprint you were charging it and now it won't come on...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Gibsonusa said:
Not sure if this will work for you, but ill still send this link to you or those who might use this service.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
I'm going to go to Sprint today and if that doesn't work I might try the JTAG thing. Or just sell it to someone who wants to do it and get another phone. I don't really want to get another phone, but... I gotta do something.
Thanks for the responses.
I recently flashed Caulkin's 4.0 Rom for the e4gt and was wondering if its possible to flash touch recovery with the Rom? I would normally play around to figure it out, but figured I'd ask first so I can maybe avoid a brick.
Thanks in advance!
Sent from my SPH-D710 using XDA
Stryke_the_Orc said:
I recently flashed Caulkin's 4.0 Rom for the e4gt and was wondering if its possible to flash touch recovery with the Rom? I would normally play around to figure it out, but figured I'd ask first so I can maybe avoid a brick.
Thanks in advance!
Click to expand...
Click to collapse
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
tdunham said:
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
Click to expand...
Click to collapse
I agree with the first part, stay away from CWM9 touch. Youre asking to get bricked. CWM5-7 recover rogue is fine to use between ICS roms. Always run Calkins format all. And never use cwm.recovery to do a nand back to GB. Flash SFHUBS stock EL29 first via Odin..along with calk's format all prior to.that then nandroid back to your previous set up.
tdunham said:
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
Click to expand...
Click to collapse
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
cuz the ics source isnt out for our phones yet. And frankly im just happy the were able to port ics without the source in the first place
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
You my friend sounds like a man who wants to fix it.... Can't complain(if your are complaining) about stuff that you yourself can not help on or fix.. If you don't like the procedure its not like you are being forced to do it... My bad I know I know I will shut up now
Edit: sorry OP I should of at least chimed in on your question.... If you want to use Touch recovery it tells me you have not read much in these forums so I would suggest you take a lil time and read the brick threads and stickys... Quite helpful
Thanks guys, you just saved me a huge headache lol. I only asked because i hate to lose a paid app, but better that than brick my phone.
Thanks again!
Sent from my SPH-D710 using XDA
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
Build a solid ics kernel for us then. Or wait until we get the official release. There is no fix because nothing is broken. All ics roms for this phone are built on leaked kernels.
But I'm sure your post was just sarcasm and you knew that since it's been spoken about in just about every ics rom thread.
Sent from my SPH-D710 using Tapatalk 2
Alright i have flashed probably about 500 times without incident but this morning i flashed the new aokp build 39 it wasrunning good but i wanted to go back to wicked sensations so i went into recover agats and tried restoring a backup it stayed at the restoring up data forever so i went back into recovery and just tried to flash a new rom cleanly no matter what i do it gets hung up at at the data parts my phonewill only go to boot animation i cant restore anything or flash a new rom but i can get into recovery ive tried everything any suggestions please!!!! Basically my phone wont boot fully and i cant flash or restore anything but i can get into agat recover nothing like this has ever happened im freakin out cause sprint is not open til monday and i cant be without my phone : (..
Sent from my K1 using xda premium
sbeekman said:
Alright i have flashed probably about 500 times without incident but this morning i flashed the new aokp build 39 it wasrunning good but i wanted to go back to wicked sensations so i went into recover agats and tried restoring a backup it stayed at the restoring up data forever so i went back into recovery and just tried to flash a new rom cleanly no matter what i do it gets hung up at at the data parts my phonewill only go to boot animation i cant restore anything or flash a new rom but i can get into recovery ive tried everything any suggestions please!!!! Basically my phone wont boot fully and i cant flash or restore anything but i can get into agat recover nothing like this has ever happened im freakin out cause sprint is not open til monday and i cant be without my phone : (..
Sent from my K1 using xda premium
Click to expand...
Click to collapse
Can you get into Download mode? If so, then use one of Sfhubs One-Click Odin ROMs.
IVE TRIED ITS NOT WORKIN I USUALLY GET IT IN ONE SHOT I LITERALLY CAN ONLY GET INTO RECOVERY MODE BUT ANYTHING I TRY DOING IN RECOVERY JUST HANGS WHEN IT GETS TO ANYTHING THAT HAS TO DO WITH DATA FML I AM STUMPED HOPEFULLY SOMEONE KNOWS!!!
Sent from my K1 using xda premium
http://forum.xda-developers.com/showthread.php?t=1525495
I HEARD TWO OTHER PEOPLE BRICKED TODAY FROM USING THE RECOVERY IN THATBAOKP 39 BUT I WAS ABLE TO GET OUT OF THAT AND INTO AGAT RECOVERY SO IDK
Sent from my K1 using xda premium
So what does your phone do when you hold down Vol - and Power?
WELL I GOT IT IN DL MODE I FLASHED SFHUBS ONE CLICK FC24 AND NOW ITS JUST STUCK AT GALAXY S2 SCREEN IT SAID PASS AND REBOOTED BUT JUST STAYED AT GALAXY S2 SCREEN WEIRD IDK
Sent from my K1 using xda premium
Give it some time....
Sent from my SPH-D710 using xda premium
Sounds like the emmc data corruption bug, there's s thread about it in general somewhere. Basically sounds like you damaged the data partition which for now means a permabrick, they're looking for a fix in the thread in general but last I checked one hasn't been found yet
We are legion, for we are many.
sbeekman said:
WELL I GOT IT IN DL MODE I FLASHED SFHUBS ONE CLICK FC24 AND NOW ITS JUST STUCK AT GALAXY S2 SCREEN IT SAID PASS AND REBOOTED BUT JUST STAYED AT GALAXY S2 SCREEN WEIRD IDK
Sent from my K1 using xda premium
Click to expand...
Click to collapse
Please check your Odin log and try full pkg - not Nodata ver. If it hits the eMMC lockup it should hang on data.img if I remember correctly. Also trying to access data partition by ADB, such as dd, should cause the phone to hang until battery is pulled.
Once verified only solution is replacement at the moment.
Sent from my SPH-D710 using XDA
I'm also concerned when you say you were using Agat's recovery when you bricked (if you are bricked). You flashed an AOKP rom, which probably has it's own kernel and recovery. Anyway, you can't use his recovery with AOKP...not compatible.
I didnt see were you tried el29 oneclick??? All i seen is that you tried another ics oneclick! If you havemt tried el29 oneclick give that a shot. I seem to think that flashing from ics-ics roms in cwm recovery or any recovery was bad??? I have always used odin or mobile odin just way safer.
---------- Post added at 10:40 AM ---------- Previous post was at 10:37 AM ----------
sbeekman said:
WELL I GOT IT IN DL MODE I FLASHED SFHUBS ONE CLICK FC24 AND NOW ITS JUST STUCK AT GALAXY S2 SCREEN IT SAID PASS AND REBOOTED BUT JUST STAYED AT GALAXY S2 SCREEN WEIRD IDK
Sent from my K1 using xda premium
Click to expand...
Click to collapse
This might be your problem, you need to flash back to GB i believe try the EL29 one click like I said and see what that does for you? It may be a soft brick if you still have your recovery intact! And the fact that the oneclick you did install passed is good since it passed !!!
I think your problem may be that your CAPS LOCK is stuck in the ALL CAPS position... It might be confusing the computer when you are typing commands into it... Jk!
But from the sounds of it the problem may be that you're running a ROM with an incompatible kernel. I would recommend doing sfhub's EL29 one-click rooted full restore. You're able to get to both recovery and download mode so it leads me to believe the phone is functional but you're just not doing the right things to get it functional enough for you to use it.
Download Link
Instructions Thread
Good luck!
Damn!!! That just happened to me right now!!! I am soooo frustrated. I have flashed a million times and i tried that aokp 39 and i am in same situation! I was on wicked sensations and AGAT's had no problem going ics to ics. I usually don't take a chance and just use mobile odin but this time i was not paying attention. Please let me know if you find a fix
"I think your problem may be that your CAPS LOCK is stuck in the ALL CAPS position... It might be confusing the computer when you are typing commands into it... Jk! " he he
I have model SPH-D710.
I followed the guide here.
I had no problems whatsoever until the final reboot. Now my phone's stuck at the 2nd loading animation... the one with the android on the skateboard in the middle of the screen with the blue things coming at you.
I can boot into Odin mode. I cannot, however, boot into recovery mode.
Is there anything I can do? Did I totally screw up my phone to where I'm going to just have to buy a new one and cry about it because my dad would have killed me for voiding my warranty on "such an expensive phone?"
Try regular booting again
This happened on my og epic and my nexus s when I install cm9
Just holding the power button to tun off them holding it to turn on helps
Also it takes a while to boot up
Sent from my SPH-D710 using xda premium
gtuansdiamm said:
Try regular booting again
This happened on my og epic and my nexus s when I install cm9
Just holding the power button to tun off them holding it to turn on helps
Also it takes a while to boot up
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'm going to have to let it charge now... It died sitting on that animation for the last hour.
So... it's still not working
This is what you do
Odin to el29
Get root and recovery (just get cwm nothing fancy like rogue)
Go to recovery
Wipe everything
THen install cm9
You have have flashed from an pics recovery and that doesn't work so use el29
Sent from my SPH-D710 using xda premium
Don't think it was mentioned but Alpha 5 does not have recovery, this was done to prevent people from doing stupid things like factory resetting or installing roms.
The nightly builds have a safe recovery as well as themselves safe to flash on ICS recoveries if you need to head that direction next. But a replacement for Alpha 5 will be out in eventuality with all that as well.
I got it to work after I flashed back to GB and then back to alpha 5.
No idea what went wrong before, but it works now!
You probably flashed from an ics recovery
For some reason we can't get rom flashing on ics to work
Every one has been using Odin to go to el29 or at least they flashed the kernel with the recovery of el29 them flashed the rom
Sent from my SPH-D710 using xda premium
EL29?
Am I missing something here? I've been using EL26 to flash.
Should I be using EL29? Because i don't want be doing something that can potentially harm my phone.
Sent from my sprint Samsung galaxy s2 Epic 4g touch with ics using cm9 on the blazing slow now network
gilbydakid said:
EL29?
Am I missing something here? I've been using EL26 to flash.
Should I be using EL29? Because i don't want be doing something that can potentially harm my phone.
Sent from my sprint Samsung galaxy s2 Epic 4g touch with ics using cm9 on the blazing slow now network
Click to expand...
Click to collapse
You are ok with EL26.... just keep following what the OP says in the rom threads and you will be alright.
gilbydakid said:
EL29?
Am I missing something here? I've been using EL26 to flash.
Should I be using EL29? Because i don't want be doing something that can potentially harm my phone.
Sent from my sprint Samsung galaxy s2 Epic 4g touch with ics using cm9 on the blazing slow now network
Click to expand...
Click to collapse
You can use the EL26 kernel on EL29 some people flash just the EL26 kernel for recovery, other people odin to EL29 and use the auto rooter to flash the EL26 CWM or EL29 Rogue kernel. Last i checked the CM9 brick from flashing with Rogue is a simple soft brick easily fixed with odin.
gtuansdiamm said:
You probably flashed from an ics recovery
For some reason we can't get rom flashing on ics to work
Every one has been using Odin to go to el29 or at least they flashed the kernel with the recovery of el29 them flashed the rom
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
My friend you may have a little homework to do. Things have improved greatly for us in reference to flashing roms with certain recoveries and kernels for ICS. I for one use the nightlys for CM9 and flashing roms and wiping has been fixed.
Do yourself a favor and stroll through development and read up on the new stuff that has come about over the last couple weeks or so.
Enjoy guys and OP glad you got your phone back up and running. Next time don't panic!
playya said:
My friend you may have a little homework to do. Things have improved greatly for us in reference to flashing roms with certain recoveries and kernels for ICS. I for one use the nightlys for CM9 and flashing roms and wiping has been fixed.
Do yourself a favor and stroll through development and read up on the new stuff that has come about over the last couple weeks or so.
Enjoy guys and OP glad you got your phone back up and running. Next time don't panic!
Click to expand...
Click to collapse
Hey if it ain't broke don't fix it you know
I really don't know current happenings in the Dec section cause well I've been busy.
Lets just keep things friendly only say this cause well I don't know you tone
Sent from my SPH-D710 using xda premium
Hey guys,
I purchased this phone today, went home and immediately rooted the phone.
Everything went fine, until I tried flashing a custom recovery than the problem occurred,
I'm on a FL24 basebad with 4.0.4, and every time my phone boots 10 seconds later it restarts.
What's going on?
I rooted the phone with Odin, once rooted I installed mobile Odin and flashed a customer "Kernel / Recovery" now the phone constantly reboots.
Install the stock kernel.
Sent from my SPH-D710 using xda premium
Well the kernel I flashed was 0.4.0, I heard that one has reboot issues so I flashed 0.3.0 and it's working great.
The only thing I can't figure out now is how to flash CWM, keeps taking me to the download screen when booting into "recovery".
Trytohaxme said:
Well the kernel I flashed was 0.4.0, I heard that one has reboot issues so I flashed 0.3.0 and it's working great.
The only thing I can't figure out now is how to flash CWM, keeps taking me to the download screen when booting into "recovery".
Click to expand...
Click to collapse
To boot to recovery
Vol up plus power and hold
Once the splash screen shows, release power and continue to hold Vol up.
You will get to recovery.
Sent from my SPH-D710 using xda premium
I must not have been holding it long enough, appreciate the reply.
How come E4GT ROMS are so large in size, back when I had an EVO and Optimus roms were about 100MB, E4GT are about 500mb?
Well sounds like the recovery was either flashed wrong or is defective for whatever reason..
Here is how to root that version by qb77king. He is very good http://www.youtube.com/watch?v=gqmKN2ewatk&feature=youtube_gdata_player.....
here is a video for the recovery http://www.youtube.com/watch?v=Kb63ldWtnoM&feature=youtube_gdata_player
So I'd like to help but need to know more info to go by. Did you enable USB debugging when you flashed the recovery? Anyways go ahead and go to stockroms.net. there you can find a stock ROM to flash your phone with unless its virgin or boost.
I recommend just getting stock jellybean or wild for the night cyanogen.. I know you just bought it but I can tell you its worth it ICS is horrible,Too many problems. You can actually find a jellybean ROM that is already rooted when u flash it.. Anyways download the android root toolkit from the market... This will save your phone's root
Sent from my SPH-D710 using xda premium
rockingfreely said:
Well sounds like the recovery was either flashed wrong or is defective for whatever reason..
Here is how to root that version by qb77king. He is very good http://www.youtube.com/watch?v=gqmKN2ewatk&feature=youtube_gdata_player.....
here is a video for the recovery http://www.youtube.com/watch?v=Kb63ldWtnoM&feature=youtube_gdata_player
So I'd like to help but need to know more info to go by. Did you enable USB debugging when you flashed the recovery? Anyways go ahead and go to stockroms.net. there you can find a stock ROM to flash your phone with unless its virgin or boost.
I recommend just getting stock jellybean or wild for the night cyanogen.. I know you just bought it but I can tell you its worth it ICS is horrible,Too many problems. You can actually find a jellybean ROM that is already rooted when u flash it.. Anyways download the android root toolkit from the market... This will save your phone's root
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No. Already fixed.
Don't listen to this guy.
Sent from my SPH-D710 using xda premium
Hey Trytohoaxme. So as of right now there is no cmw for ICS. There is Agat recovery which is based off of cwm that is for either a ICS ROM or jelly bean ROM. I have cmw that is a jingerbread kernal that interfaces with CyanogenMod 10.1 which has 4.2.2 jellybean. If you flash clockworkmod it won't work with a stock rom your phone won't be able to boost up..
Graydiggy u are pretty rude. I hope to god your mom raised you better. Show some respect on this forum, XDA is a place for positive feedback, not negative people who criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
rockingfreely said:
Graydiggy u are pretty rude. ...criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Who's conceited?
I'm pretty sure he's just trying to help and avoid misinformation, no need to get offended, bud... And the op stated the issue was already resolved.
He never asked about cwm specifically, just a custom recovery. On TW ICS I've used Agat's, Ruj's, and Slesh's kernels/recoveries without issue. There's really no need for EL26/CWM tar unless you want to play it safe (which i do) going from TW to AOSP or vise versa.
And yes stock TW ROMs are huge. AOSP ROMs end up around 240 megs (give or take) including Gapps.
Trolling from my Cricket-flashed Galaxy S2 E4GT using Tapatalk 2
rockingfreely said:
Hey Trytohoaxme. So as of right now there is no cmw for ICS. There is Agat recovery which is based off of cwm that is for either a ICS ROM or jelly bean ROM. I have cmw that is a jingerbread kernal that interfaces with CyanogenMod 10.1 which has 4.2.2 jellybean. If you flash clockworkmod it won't work with a stock rom your phone won't be able to boost up..
Graydiggy u are pretty rude. I hope to god your mom raised you better. Show some respect on this forum, XDA is a place for positive feedback, not negative people who criticize others who which are naive and conceited.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Well when people like you give incorrect information like you are currently doing, or makes everything more complicated than it should be, again, something you are doing, I will be rude. ICS has had source for a very very long time and has had a CWM for a long time. JB does not. I have been here for a long time and there is a reason I have recognized contributor. I may be rude, but when someone else risks someone's expensive phone, sometimes it takes being rude. If you can't handle it, oh well.
The reason for my response was because the issue was solved and the stockroms.net is not a site that I trust. We have a repository for all of our stock ROMs.
Sent from my SPH-D710 using xda premium
I already upgraded from ICS FL24 to JB GB27.
The problem I have as of now is, I don't know which roms are compatible with my device?
I'm on JB 4.1.2 GB27, does that mean I can only flash GB27 roms?
Trytohaxme said:
I already upgraded from ICS FL24 to JB GB27.
The problem I have as of now is, I don't know which roms are compatible with my device?
I'm on JB 4.1.2 GB27, does that mean I can only flash GB27 roms?
Click to expand...
Click to collapse
You can flash any ROM for the E4GT... You are in the right forums for that.
Oh okay, I was asking because the thread title of most ROMs say "[ROM] FL24 Kuban Kernal" ETC..
Since I'm on GB24, I can still use EL26 ROMs and all?
Trytohaxme said:
Oh okay, I was asking because the thread title of most ROMs say "[ROM] FL24 Kuban Kernal" ETC..
Since I'm on GB24, I can still use EL26 ROMs and all?
Click to expand...
Click to collapse
Just read the instructions for each ROM. They will tell you exactly what is needed.
Sent from my SPH-D710 using xda app-developers app