Hello, I just got my new Galaxy Nexus (with Wind Mobile in Canada) and I successfully unlocked and rooted my phone. I tried to flash some roms and no matter what roms (tried AOSP and Gummy just now) I flash, the baseband goes unknown and I basically can't get any service with my phone. I'm wondering if this is is an isolated incident with me or if I'm doing something wrong. Any suggestions and comments will be appreciated. Thanks!
I've never heard of this.. very strange.
Sent from my GT-I9300 using Tapatalk 2
This may sound like a silly question, but you are flashing the GSM version of the ROMs, right?
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
This may sound like a silly question, but you are flashing the GSM version of the ROMs, right?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I don't believe I am. When I fastboot, it says "Maguro" so I flashed a maguro type rom but when I do that, it gives me an error. So I flash it with a Toro type rom, and then it works. But after flashing it with a Toro rom, it gives me the error I mentioned in my opening post.
salabanzi said:
I don't believe I am. When I fastboot, it says "Maguro" so I flashed a maguro type rom but when I do that, it gives me an error. So I flash it with a Toro type rom, and then it works. But after flashing it with a Toro rom, it gives me the error I mentioned in my opening post.
Click to expand...
Click to collapse
Toro ROMs are for toro (i.e., Verizon) devices. They will NOT work on marguro (i.e., GSM) devices...
efrant said:
Toro ROMs are for toro (i.e., Verizon) devices. They will NOT work on marguro (i.e., GSM) devices...
Click to expand...
Click to collapse
efrant, thanks for the quick response. I'm a newbie at this but my galaxy nexus is from purchased from wind mobile so I'm not sure if it's GSM or verizon device. There was another rom type I saw as well: "toroplus", which I didn't try flashing. Should I be flashing that type of rom or what would should I be doing? Thanks again.
salabanzi said:
efrant, thanks for the quick response. I'm a newbie at this but my galaxy nexus is from purchased from wind mobile so I'm not sure if it's GSM or verizon device. There was another rom type I saw as well: "toroplus", which I didn't try flashing. Should I be flashing that type of rom or what would should I be doing? Thanks again.
Click to expand...
Click to collapse
You have a maguro (GSM) device. Only Verizon has toro devices, and only Sprint has toroplus devices. Everyone else in the world has marguo.
The best thing for you to do is to flash the stock images (follow the "flash" link in my signature). Once you are done that, then flash whatever custom ROM you want (maguro version of course).
efrant said:
You have a maguro (GSM) device. Only Verizon has toro devices, and only Sprint has toroplus devices. Everyone else in the world has marguo.
The best thing for you to do is to flash the stock images (follow the "flash" link in my signature). Once you are done that, then flash whatever custom ROM you want (maguro version of course).
Click to expand...
Click to collapse
Thanks. On the google page with the factory images, which factory image should I be downloading? I'm assuming "yakju" but I'm not 100% sure.
salabanzi said:
Thanks. On the google page with the factory images, which factory image should I be downloading? I'm assuming "yakju" but I'm not 100% sure.
Click to expand...
Click to collapse
yakju or takju, it doesn't matter at this point. The important thing is that it is maguro.
efrant said:
yakju or takju, it doesn't matter at this point. The important thing is that it is maguro.
Click to expand...
Click to collapse
Hey, I finally got around to trying out your instructions. It worked great. Running AOSP now! Thanks so much!
salabanzi said:
Hey, I finally got around to trying out your instructions. It worked great. Running AOSP now! Thanks so much!
Click to expand...
Click to collapse
If you followed my guide you are certainly NOT running an AOSP build.
Related
This is something im wanting to test for Verizon GNex users, If you flash my AndroidME GNex 1.7.0 ROM and then flash this file after it SHOULD convert it to a working version for Verizon, If anyone is willing to test id be grateful.
This wont change anything you cant reverse so just take a backup of your current setup and if it doesnt work just restore. This WILL NOT flash a radio, only the ROM.
So to be clear download both files bellow, Flash the GSM ROM then straight after flash the Verizon-update.zip, Then boot up.
Verizon-update.zip
MD5: 9a2abb35cd83ca2221996611899fd541
AndroidME_GNex_1.7.0.zip
MD5: 74be013e28fa456c786a73931951db9f
Please let me know asap if it works, If it doesnt ill take this down. Thanks
UPDATE:
Changed ROM to GNex version (Stock Google base) and has no assert (getprop) in updater so should flash fine.
Updated Verizon-update.zip with all the Toro props i could think of.
Sure, I don't mind being a guinea pig. Downloading now. Edit soon.
Edit: No-go. The ROM wouldn't install. Tried to flash in CWM Touch. It said there was a error with the zip file (Status 7) and aborted installation.
Sent from my BAMF Nexus
RoyJ said:
Sure, I don't mind being a guinea pig. Downloading now. Edit soon.
Edit: No-go. The ROM wouldn't install. Tried to flash in CWM Touch. It said there was a error with the zip file (Status 7) and aborted installation.
Sent from my BAMF Nexus
Click to expand...
Click to collapse
The patch wouldn't have worked to make it function on Verizon either.
For this all to work, you would need:
Toro proprietaries, Toro asserts in the installer script for the rom, as well as a modified Mms.apk with the correct uaprof. Then it should (mostly) work.
The framework would still be wrong for radio attributes though. This has yet to show any bearing on how that affects anything.
adrynalyne said:
The patch wouldn't have worked to make it function on Verizon either.
For this all to work, you would need:
Toro proprietaries, Toro asserts in the installer script for the rom, as well as a modified Mms.apk with the correct uaprof. Then it should (mostly) work.
The framework would still be wrong for radio attributes though. This has yet to show any bearing on how that affects anything.
Click to expand...
Click to collapse
I'll make another one soon. Forgot about the getprop function in ROM updater.
Sent from my Galaxy Nexus using Tapatalk 2
Would this be similar to what the CDMA RAZR and GSM RAZR are doing when it comes to switch between ROMs?
Sent from my Galaxy Nexus using xda premium
DirgeExtinction said:
Would this be similar to what the CDMA RAZR and GSM RAZR are doing when it comes to switch between ROMs?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
not exactly because motorola has both radios in one phone we dont we either have GSM or CDMA/LTE
VZW GNex doesn't have a hidden GSM radio
robbiejobs said:
VZW GNex doesn't have a hidden GSM radio
Click to expand...
Click to collapse
This has nothing to do with radio. So as long as the file has the right props with a correct build.prop etc it should work fine. I compiled cm10 for both devices and compared side by side and there shouldn't be any issues.
Sent from my Galaxy Nexus using Tapatalk 2
CdTDroiD said:
This has nothing to do with radio. So as long as the file has the right props with a correct build.prop etc it should work fine. I compiled cm10 for both devices and compared side by side and there shouldn't be any issues.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
if this works man i will be so happy, if it works out could you make one for say maguro to toroplus (sprint)? and toro to toroplus? ive always wanted to try some roms the gsm and verizon one have, the sprint toroplus doesnt get as much attention as the others
Alex1123 said:
if this works man i will be so happy, if it works out could you make one for say maguro to toroplus (sprint)? and toro to toroplus? ive always wanted to try some roms the gsm and verizon one have, the sprint toroplus doesnt get as much attention as the others
Click to expand...
Click to collapse
Itll work just got to figure out exactly what it needs. Should be golden by tonight then I'll post in both forums on my ROM
Sent from my Galaxy Nexus using Tapatalk 2
Well hey, if you need another tester. I'm always game.
Sent from my BAMF Nexus
OK guys, you can try again if you wish, update on first post. Again please let me know asap if it works
wait, wouldn't the cdma and LTE radios not work? (unless the proper drivers and libs were utilized of course)
achangavi said:
wait, wouldn't the cdma and LTE radios not work? (unless the proper drivers and libs were utilized of course)
Click to expand...
Click to collapse
Already said a couple of times this does not change your radio
Sent from my Galaxy Nexus using Tapatalk 2
hello all , i tryed to download your rom but its always keep saying "The file you requested was not found" so update the url.
maothman4 said:
hello all , i tryed to download your rom but its always keep saying "The file you requested was not found" so update the url.
Click to expand...
Click to collapse
New link
Sent from my Galaxy Nexus using Tapatalk 2
Is their no command for people to use GSM ROMs on the Verizon?
Sent from my Galaxy Nexus using Tapatalk 2
CdTDroiD said:
New link
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
"403 Forbidden"
Sent from my BAMF Nexus
RoyJ said:
"403 Forbidden"
Sent from my BAMF Nexus
Click to expand...
Click to collapse
That's goo.im not his link (Well I mean it is his link since he is posting on goo... You know what I mean).
Once Goo comes back up I will be more than happy to give this a try.
The file you requested was not found
I located in hong kong and bought an imported Nexus, which country does my phone "belongs to"?
Because until now I still don't have 4.1.1 update!!
Here is my phone detail:
Android version: 4.0.4
baseband version I9250XXLA2
Build number: IMM76K.I9250ZSLE2
Maps >> settings >> about should tell you which yakjuxx variant you have.
3rdstring said:
Maps >> settings >> about should tell you which yakjuxx variant you have.
Click to expand...
Click to collapse
yakjuzs
sunny7day said:
yakjuzs
Click to expand...
Click to collapse
That means you're getting OTA via Samsung, not Google. What I recommend you to do is use Efrant's guide to convert from what you have to yakju or takju. It only takes few minutes... Make sure that you got everything backed up, since the process includes you wiping EVERYTHING.
But when I connect my Nexus to kies it keep saying "connecting", tried on two different computers.
BTW, am I running the right firmware?
Well first of all, Gnex doesn't use Kies... You need to download the drivers yourself
And what do you mean by right variant?
Samsung use kies right? Where can I get the driver?
I think I am using Verizon firmware?
Are you with Verizon? If not, the answer is no.
Only device with Samsung Touchwiz uses it. Gnex is a PURE ANDROID. Without any brand bloatware. That is why it doesn't have Kies.
Verizon variant is mysid and if you have GSM Gnex and you can text, call and etc, you don't have Verizon variant. You don't need to worry about that.
You can get the driver and how to install it from this post
according on the web, IMM76K seems to be a Verizon firmware?
That is Verizon Android 4.0.4 version (I think). Mysid is like a "codename" for all Verizon ROMs. For example, CM10 for GSM Nexus is either takju or yakju, but CM10 for Verizon will be mysid. Hope that answers your question
how can i update to 4.1.1?
Here's the link
http://forum.xda-developers.com/showthread.php?t=1626895
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
:faceplam:
GSM versions also have IMM76K....
I want to update instead of flashing the phone to keep my data. Check this page, it says at the bottom that my device "was never offered as an over-the-air update"?
http://www.randomphantasmagoria.com/firmware/galaxy-nexus/i9250/
Mach3.2 said:
:faceplam:
GSM versions also have IMM76K....
Click to expand...
Click to collapse
Yeah, but he told me that the Verizon variant is IMM76K. Sorry if I confused you.. English is my second language...
---------- Post added at 05:49 PM ---------- Previous post was at 05:46 PM ----------
OP: If you don't want to convert to yakju or takju, you just need to wait. From what I know, your variant doesn't have the Jelly Bean OTA yet (Blame Samsung). I personally would just convert it and get it over with. That's what I did, and I am very happy with my decision. Photos and musics and the moved to your computer and apps+data can be backed up by following this guide
I thank you for your help. Here are my last questions:
How to tell if my phone is an import and find out where it is from?
BTW I still can't update (not flash) to 4.1.1
Well the variant can tell you if it's an import. For example, you have yakjuzs is a China variant, so it is an import. If you had takju, it will be from US. If yakjuux, Canadian. Something like that.
Ok i think mine is not an import then, thank you very much!
sunny7day said:
Ok i think mine is not an import then, thank you very much!
Click to expand...
Click to collapse
No problem. Glad I could help!
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
sunny7day said:
I want to update instead of flashing the phone to keep my data.
Click to expand...
Click to collapse
There are ways to unlock the GN without wiping data (it involves using an exploit rather than "fastboot oem unlock").
ezekeel's app has such a method.
However: I am not familiar with the Verizon GN that you say you have. I can't say for sure the app will work with it. You can ask around in his thread. There may also be other ways I'm not aware of.
I see a lot of gsm only roms. My phone is a i9020AUCKF1 with old 2.3.6 on it. I've been having trouble flashing a new rom to it in the first place and am not entirely sure what the source of the issue is. I understand that certain roms are meant for certain networks, mine is cdma and I have no data on my at&t plan through it. Rooted and installed rom manager just fine. Just where do I go from here?
You're in the wrong forum.
Sent from my i9250
bk201doesntexist said:
You're in the wrong forum.
Sent from my i9250
Click to expand...
Click to collapse
is there another galaxy nexus forum i should be in?
Zercomnexus said:
I see a lot of gsm only roms. My phone is a i9020AUCKF1 with old 2.3.6 on it. I've been having trouble flashing a new rom to it in the first place and am not entirely sure what the source of the issue is. I understand that certain roms are meant for certain networks, mine is cdma and I have no data on my at&t plan through it. Rooted and installed rom manager just fine. Just where do I go from here?
Click to expand...
Click to collapse
Happy new year!
First of all you should consider to use the Nexus S specific forum ( http://forum.xda-developers.com/forumdisplay.php?f=880 ) not, this one which is for the Galaxy Nexus (i9250).
Anyway, there are the official images for the 4.1.2 version, released by google. ( https://developers.google.com/android/nexus/images?hl=it-IT#sojua )
The procedure to flash it is quite straightforward: just use the simple "flash-all.bat" inside the zip file.
Take a look to the stock rom and than read the forum for your device (you will find a specific cdma sub-forum too) .
Your phone, the i9020A, is Google Nexus S, not a Samsung Galaxy Nexus (i9250).
Zercomnexus said:
is there another galaxy nexus forum i should be in?
Click to expand...
Click to collapse
Sarcastic, are we?
Google Galaxy Nexus was the first device to ship with Ice Cream Sandwich.
ICS first version is 4.0.1, 2.3.6 is Gingerbread, which was never available for this device.
Google Galaxy Nexus model number is GT-I9250.
Sent from my i9250
Zercomnexus said:
is there another galaxy nexus forum i should be in?
Click to expand...
Click to collapse
None of them.
Sent from my Nexus 7 using Tapatalk HD
kliw said:
Happy new year!
First of all you should consider to use the Nexus S specific forum ( http://forum.xda-developers.com/forumdisplay.php?f=880 ) not, this one which is for the Galaxy Nexus (i9250).
Anyway, there are the official images for the 4.1.2 version, released by google. ( https://developers.google.com/android/nexus/images?hl=it-IT#sojua )
The procedure to flash it is quite straightforward: just use the simple "flash-all.bat" inside the zip file.
Take a look to the stock rom and than read the forum for your device (you will find a specific cdma sub-forum too) .
Click to expand...
Click to collapse
google never released an official 4.2.X for the nexus s. its not longer supported by google, not for jelly bean at least.
hi, I bought new galaxy nexus y'day. the box says its for chinese region. when i went to update my phone it shown 4.1.1 is latest. i know already 4.2.1 is launched. So How do I make my phone takju compatible so that i can get updates directly from google. I am not quite sure. If somebody can explain me I will be more than happy. I am currently having s3 and earlier had SL. but there scenario used to be different. If you can help me or give me some links I will really appreciate. I am from India and GNex was never launched here so its gray market piece. so please guide me. Thanks
emptyragnarok said:
hi, I bought new galaxy nexus y'day. the box says its for chinese region. when i went to update my phone it shown 4.1.1 is latest. i know already 4.2.1 is launched. So How do I make my phone takju compatible so that i can get updates directly from google. I am not quite sure. If somebody can explain me I will be more than happy. I am currently having s3 and earlier had SL. but there scenario used to be different. If you can help me or give me some links I will really appreciate. I am from India and GNex was never launched here so its gray market piece. so please guide me. Thanks
Click to expand...
Click to collapse
http://webtrickz.com/easiest-way-to...akjuxw-non-yakju-to-android-4-0-4-yakjutakju/
Here you go and for any other problems PM me..
Dont forget to hit the thanks button if u think i helped you.
Sent from my Galaxy Nexus using xda premium
[HOW-TO] [GSM & CDMA] Return to stock for ALL Galaxy Nexus phones (latest JOP40D)
3rdstring said:
[HOW-TO] [GSM & CDMA] Return to stock for ALL Galaxy Nexus phones (latest JOP40D)
Click to expand...
Click to collapse
thanks both of you.. I will do it soon
emptyragnarok said:
thanks both of you.. I will do it soon
Click to expand...
Click to collapse
My pleasure
Sent from my Galaxy Nexus using xda premium
abhishek93 said:
My pleasure
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Can you tell me another thing Is it safe to flash TAKJU 4.2.1 over YAKJU 4.2.1??
Read all efrant's directions thoroughly first, perhaps several times to be sure you understand the process. Without CWM, i believe your most important step would be "fastboot erase cache". If you have CWM, there's no harm in wiping cache and dalvik. I would even do a factory reset first to be safe. Yes, there are ways to preserve your data, if you already have any, but reading for comprehension is key.
I got a new nexus i9250m today.Is it safe to flash i9250 rom in this phone?Should be looking for something special?Any changes?any special care to be taken?Im supposed to download maguro roms only right ?
aswinrulez said:
I got a new nexus i9250m today.Is it safe to flash i9250 rom in this phone?Should be looking for something special?Any changes?any special care to be taken?Im supposed to download maguro roms only right ?
Click to expand...
Click to collapse
according to this thread & from my memory, i9250 & i9250m are both maguro
so there should be no changes
you may want to confirm with someone else just in case
they're the same.
thanks guys i'm gonna try flashing it