Related
1) Yes I checked search results.
2) Yes I've googled.
3) Yes I've tried the Kindle Fire Utility, the http://forum.xda-developers.com/showthread.php?t=1356257... links options.
With that being said, here's my issue;
Got a KF a couple days ago...
Yesterday, followed some online instructions to put GO Launcher EX on there to replace the carousel deal.
Followed instructions to the T.
Restarted. Got to "Choose your OS" screen (or whatever it precisely says...)
Picked GO... then it froze.
Now, when it restarts (yes, its the 30 second hard restart), it gets stuck on the Kindle Fire splash screen.
I have tried the above utilities.
I have hard restarted.
I have fully charged and ran the battery dry and tried again.
When I use the utilities, the problem is, my PC will not recognize the Kindle (it see's it as a removable storage device, but it doesn't click over to 'Kindle', and thus the utilities can't interact with the device itself, I suppose).
I've tried different USB ports and connecters (I have 2 regular kindles in the house, too). But I know all the peripherals work through cross-testing.
Essentially, what else can I do? (I got it from WalMart, and they're currently out of stock, so I can't return it till next week, but I'd like it fixed before then if possible)
I've tried several different methods from these forums too, but I *always* hit the same snag... whenever any utility is 'waiting for device', it simply will not find it, because the PC doesn't see it properly. It sees *something* (removable storage) but not as a kindle, and thus won't allow the utilities to interface with it.
Are there any physical things I can do to hard reset it without destroying any warrantys?
Any help appreciated!
there is no need to return it
from what you say i think you have a bad launcher on it and the kf tries to start it but can't
first i need to know if you have fff (custom bootloader - yellow triangle) on it ?
then do you have a recovery (twrp) on it ?
what os/bit of computer ?
In kindle utility go to bootmodes and enter normal (4000). Just had that problem last night.
awidawad - I've tried that. It stays on 'waiting for device' forever. Please explain step by step what you did? At which point did you power on the KF, when did you run KFU, etc, etc.
b63 - I hope your right!
no - I do not have the yellow triangle.
no - I do not have TWRP on it, i have tried, but cannot get anything onto the kindle.
my PC is window7, 64bit
Euryon said:
awidawad - I've tried that. It stays on 'waiting for device' forever. Please explain step by step what you did? At which point did you power on the KF, when did you run KFU, etc, etc.
Click to expand...
Click to collapse
Do you have all the kf drivers installed on your computer? I know that when I unbricked mine I had all the drivers installed but I had to reinstall them for some reason. If you do not have them I can post them later on tonight when I'm at home. However, I have TWRP installed on mine, and Cyanogenmod 7.2, so hopefully yours is able to connect to your computer.
---------- Post added at 12:56 PM ---------- Previous post was at 12:50 PM ----------
b63 said:
there is no need to return it
from what you say i think you have a bad launcher on it and the kf tries to start it but can't
Click to expand...
Click to collapse
In order to remove the bad launcher, you need to have your device connected to your computer to remove it using adb.
ok so b63 helped me out big time here....
about 2 hours ago we got on a teamviewer session (download this if you want these guys to help you with serious issues!)
took me a minute to figure out how to allow him/her proper access to my screen
anyway
i don't understand the technical stuff
but
what i had done wrong is that i didnt root the KF before trying to install the GO... software (i think)
b63 had a heck of a time trying to discern the problem with me being about as useful as a dead fish, but get there he/she did
after much fanangaling, b63 managed to install the TWRP and ADP on my KF, allowing it to fastboot, and basically allowing it to be read by my PC, and so fixed.
im sure it would have taken b63 all of 5 minutes in real time, but using the quirky teamview and my slow net speed didn't help
still, thanks VERY MUCH to b63 for fixing the **** out of my KF, and being very helpful and patient all along!
thanks
Just wanted to drop b63 a note here that I "thanks"ed their post above - not necessarily for the post but for going above and beyond. The people on these forums are (for the most part) really great. (Too bad there have to be a few who are demanding of the developers to get this feature or that fix done faster without taking into account that the devs do this all in their free time.)
YES, search finally led me here!
Euryon, I have the exact same thing happening with my KF right now.
Do you remember any specifics of how b63 carried out the steps you listed?
b63, any chance you could help me with mine? My issue is identical with Euryon's down to the letter.
Same Problem
Could someone please help me i have the same problem
same problem here! please can someone give a step by step? My fire is unrooted and I did nothing to it except try to install the go launcher and after I selected it as the default launcher it got stuck at the kindke fire logo.
I tried the Kindle unbricking utility but it cannot find the device even after I installed the adb composite interface
also, my fire is not showing up as a kindle - it is showing up as an android device.
rollno88 said:
also, my fire is not showing up as a kindle - it is showing up as an android device.
Click to expand...
Click to collapse
Have you added the fires usb ID to your system?
Sent from my Amazon Kindle Fire using Tapatalk 2
thanks for replying, and I have no clue how to do that. I'll search and get back .
---------- Post added at 10:12 AM ---------- Previous post was at 09:57 AM ----------
okay, I already did that by editing the android sdk(as a prerequisite to rooting, which I planned to do eventually) - so when I connect my fire it first shows up as a kindle, and after updating the software through windows and installing drivers through KFU, it comes up as an android device and the interface is adb composite. Now if I try to install TWRP through KFU it keeps switching between adb composite interface and plain adb. And both KFU and KUFU keep waiting but are unable to find my device.
also, my fire alternately shows up as a usb composite device and an android device. PLEASE help
okay I solved it with KFU (finally!) although I have no clue how I did it as I didn'tdo anything I hadn't tried earlier so, managed to install TWRP and then wiped everything and finally my fire could be read - then I deleted go launcher and now my fire is back from the grave
A big thank you to all the helpful posts at this forum - u guys are the best
Same issue
Tried rooting my KF, but couldn't change permissions and thus could not install android market. Superuser didn't do anything other than show me a log folder that had no logs. Tried to change permissions on /system and /apps with one of the file management apps on amazon and it said the device *wasn't* rooted, despite GO launcher and android interface.
Did a factory wipe to try to reroot or fully(?) root the KF, and that's when it all went wrong. Got stuck on boot loop, but KFU helped me break out of that. Now it's stuck on the Kindle Fire splash screen with no animation. I read somewhere that this was the fastboot getting "stuck."
At any rate, i have TWRP 2.0 installed and can mount and unmount the device in its interface, but it is only recognized as ADB android device, or when mounted via TWRP, USB composite device. As such, ADB commands only work occasionally - all other times it simply says <waiting for device>.
I am running Windows 7 64 bit, and 6.3 on the KF. All restarts on the KF are hard restarts, except occasionally cmd lets me fastboot reboot.
I have spent the past 2 days trying everything I have found online (2 KF unbrick applets, 15+ tabbed browsers with different threads) to no avail. I am finally posting, pleading for assistance.
Thanks in advance for any (helpful) replies. Real thanks clicking afterwards.
edit: when rerunning KFU, i kept getting the message that many execs failed because "/system/bin/sh" directory does not exist.
I don't know if that helps narrow down what might be happening, but I saw that coming up a lot in the cmd prompt.
zeissbickham said:
Tried rooting my KF, but couldn't change permissions and thus could not install android market. Superuser didn't do anything other than show me a log folder that had no logs. Tried to change permissions on /system and /apps with one of the file management apps on amazon and it said the device *wasn't* rooted, despite GO launcher and android interface.
Did a factory wipe to try to reroot or fully(?) root the KF, and that's when it all went wrong. Got stuck on boot loop, but KFU helped me break out of that. Now it's stuck on the Kindle Fire splash screen with no animation. I read somewhere that this was the fastboot getting "stuck."
At any rate, i have TWRP 2.0 installed and can mount and unmount the device in its interface, but it is only recognized as ADB android device, or when mounted via TWRP, USB composite device. As such, ADB commands only work occasionally - all other times it simply says <waiting for device>.
I am running Windows 7 64 bit, and 6.3 on the KF. All restarts on the KF are hard restarts, except occasionally cmd lets me fastboot reboot.
I have spent the past 2 days trying everything I have found online (2 KF unbrick applets, 15+ tabbed browsers with different threads) to no avail. I am finally posting, pleading for assistance.
Thanks in advance for any (helpful) replies. Real thanks clicking afterwards.
Click to expand...
Click to collapse
Read this...
http://forum.xda-developers.com/showthread.php?t=1552547
with an emphasis on post #2. You need to know what mode your device is in by looking at the device manager and make sure your drivers are loading correctly for that mode. If you can get to TWRP, you can mount your USB mass storage device, copy a new zip file of either the stock software or a custom ROM and flash it.
Thank you. I will be trying this shortly.
fully bricked
I followed the guide and got to a point where the Kindle Fire animation was playing. It loaded up to the unlock screen and then automatically shut itself down - would not stay on when either connected or disconnected. Tried installing a ROM but still shut down. Started the recovery and hit factory reset, still auto shutdown. Tried clearing a partition as described in the tutorial and now it's fully bricked. Will not turn on when connected to computer, to outlet, to another cable.
Thanks for trying to help.
First of all, I search many threads but couldn't find help for my specific problem. I rooted my Kindle Fire 6.2.2. with TWRP. Upon trying to unroot it, it bricked. I downloaded Kindle Fire Utility v0.9.3. to fix this but my computer won't properly recognize my Kindle. It doesn't seem like a driver problem. All I can do when I plug in my Kindle is eject it. And when I try to install FireFireFire, I get this error "Oops...something went wrong. We are unable to locate your Kindle Fire. Make sure it is plugged in and powered on."
Please help! Thanks.
Lyrekz said:
First of all, I search many threads but couldn't find help for my specific problem. I rooted my Kindle Fire 6.2.2. with TWRP. Upon trying to unroot it, it bricked. I downloaded Kindle Fire Utility v0.9.3. to fix this but my computer won't properly recognize my Kindle. It doesn't seem like a driver problem. All I can do when I plug in my Kindle is eject it. And when I try to install FireFireFire, I get this error "Oops...something went wrong. We are unable to locate your Kindle Fire. Make sure it is plugged in and powered on."
Please help! Thanks.
Click to expand...
Click to collapse
Please read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
so you get an understanding of how these different pieces fit together.
I can't get a sense of where your problems begin. 1) TWRP is not used to root. 2) you never mention what your Kindle Fire is doing that you think it's bricked. 3) how did you manage to root it in the first place if your drivers weren't working?
kinfauns said:
Please read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
so you get an understanding of how these different pieces fit together.
I can't get a sense of where your problems begin. 1) TWRP is not used to root. 2) you never mention what your Kindle Fire is doing that you think it's bricked. 3) how did you manage to root it in the first place if your drivers weren't working?
Click to expand...
Click to collapse
Answers: 1. Rooted with BurritoRoot3 and also installed TWRP. 2. It is stucked on the Kindle Fire screen. 3. My drivers were working then and seem to be now. The problem is my computer won't recognize my Kindle. And when I go to Kindle properties, the manufacter, model number, and description all come up as unavaible and grayed out.
Lyrekz said:
Answers: 1. Rooted with BurritoRoot3 and also installed TWRP. 2. It is stucked on the Kindle Fire screen. 3. My drivers were working then and seem to be now. The problem is my computer won't recognize my Kindle. And when I go to Kindle properties, the manufacter, model number, and description all come up as unavaible and grayed out.
Click to expand...
Click to collapse
If you installed TWRP, then you also installed FFF. If by "Kindle Fire screen" you mean the yellow triangle logo and that's all you see when it starts up without it ever blinking black, then you are in fastboot mode. Use KFU to set it back to normal and reboot it. If that doesn't work, you need to check the device manager in Windows and make sure it shows "Android Phone -> Android ADB Interface" for your Kindle Fire. If the device manager does not show that, then you need to uninstall the drivers, remove the device from the device manager, disconnect the KF from your computer and follow these directions....
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
kinfauns said:
If you installed TWRP, then you also installed FFF. If by "Kindle Fire screen" you mean the yellow triangle logo and that's all you see when it starts up without it ever blinking black, then you are in fastboot mode. Use KFU to set it back to normal and reboot it. If that doesn't work, you need to check the device manager in Windows and make sure it shows "Android Phone -> Android ADB Interface" for your Kindle Fire. If the device manager does not show that, then you need to uninstall the drivers, remove the device from the device manager, disconnect the KF from your computer and follow these directions....
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
Click to expand...
Click to collapse
First of all. thank you for the help. And now my Kindle is stuck on the Kindle Fire screen.
Mine is stuck here too..been 3 days.. ordered the factory cable.. hopefully that works.
One thing I've noticed is that sometimes when the you try to issue fastboot commands in fastboot mode it doesn't register. But that doesn't mean you aren't in fastboot mode.
Get your command prompt ready (“ready" means that "fastboot" is in your present working directory)
Turn off your Kindle
Type "fastboot devices" (without quotes)
Turn your Kindle on
Hit enter to send fastboot command
Keep hitting UP arrow to bring up last command and keep hitting enter until your computer recognizes the Kindle. If it doesn't, start over and try again. When it does, then you can change your bootmode.
It WILL work, eventually. If it doesn't, the only other logical explanation is it's a driver issue.
Typically speaking (but not always), the only reason you should ever have to use a factory cable is if you killed your battery and you don't have enough juice to power the device. There are other reasons but they are extremely RARE.
And please forgive my frustration, but this is one of the simplest concepts to master. "Unbricking" your device shouldn't be this difficult...for anyone.
Sent from my Amazon Kindle Fire using xda premium
Readyreadyready
I notice in a post someone is seeing:
"Bricked mine too. It shows up as a USB COM port and spits out "READYREADYREADYREADY" until it disconnects itself. I think this means it should be possible to restore 5.3.2.1 via sp flash tool (or maybe another serial loader). If we can get the right files"
Is that the "Ready" you are saying means wait until fastboot?
soupmagnet said:
One thing I've noticed is that sometimes when the you try to issue fastboot commands in fastboot mode it doesn't register. But that doesn't mean you aren't in fastboot mode.
Get your command prompt ready (“ready" means that "fastboot" is in your present working directory)
Turn off your Kindle
Type "fastboot devices" (without quotes)
Turn your Kindle on
Hit enter to send fastboot command
Keep hitting UP arrow to bring up last command and keep hitting enter until your computer recognizes the Kindle. If it doesn't, start over and try again. When it does, then you can change your bootmode.
It WILL work, eventually. If it doesn't, the only other logical explanation is it's a driver issue.
Typically speaking (but not always), the only reason you should ever have to use a factory cable is if you killed your battery and you don't have enough juice to power the device. There are other reasons but they are extremely RARE.
And please forgive my frustration, but this is one of the simplest concepts to master. "Unbricking" your device shouldn't be this difficult...for anyone.
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
larmores said:
I notice in a post someone is seeing:
"Bricked mine too. It shows up as a USB COM port and spits out "READYREADYREADYREADY" until it disconnects itself. I think this means it should be possible to restore 5.3.2.1 via sp flash tool (or maybe another serial loader). If we can get the right files"
Is that the "Ready" you are saying means wait until fastboot?
Click to expand...
Click to collapse
this is only for kindle fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1096 using XDA Labs
okay so i was trying to root my kindle fire and i didnt get su any where so then i tryed to install cwm and now its stuck at the yellow triangle and it wont go into recovery and it also will not connect to adb i need hellp ASAP
Install drivers as ADB composite with the Android SDK and then use this to change the bootmode
The link you posted is not working due to the period in the URL at the end.
Do not afraid. I have got the same experience Let God bless the search button
http://forum.xda-developers.com/showthread.php?t=1568340
unzip fbmode.zip
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
Your kindle will "get stuck" on the kindle fire screen, but really it's just in fastboot mode.
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img
Your device will now boot into twrp recovery, and flash the firefirefire bootlaoder. When done it will prompt you to reboot. Upon reboot you will get stuck on the "yellow triangle" screen of firefire fire.
fastboot oem idme bootmode 5002
fastboot reboot
Click to expand...
Click to collapse
My kindle got the 6.3 update -solved!!
This has got to be one of the fastest ways I have rooted 6.3 kindle update
i went on line here http://liliputing.com/2012/03/root-...ogle-play-store-with-kindle-fire-utility.html
downloaded the new kindle fire utility and ckick on Install permanent root with super user. got rooted in about 2 minutes with no trouble at all
thanks everyone for your help but i solved it what i was doing was unsing the kindle fire utility trying to instal latest firefirefire but it just sat there and so i just went into the utility and reinstaled the twrp and it booted normal!!
Bricked Kindle
Okay, I'm not having the same issue, but I'm pretty sure I've completely, irevicalbly, bricked my kindle.
I know that I'm not in Fastboot mode, I've experienced that issue and solved it with the KFU.
Here's what I did:
I used the KFU to root my kindle. That worked fine. I was able to load all the Google apps (which was my initial goal). Then, I got greedy and decided that ICS was my next step - oops.
I followed the instructions on the following site:
androidauthority.com/kindle-fire-miui-4-ics-55853/
Note: I know, I'm an idiot - I should have paid attention to comments! UGH!
After I did this, I now only get the firefirefire logo and that is it. I can't load/reload TWRP and I can't change my bootmode to normal or recovery. The thing is, no matter which computer I plug the device into, the computer won't recognize the device. I get a message saying something "malfunctioned" when I plug it in. I've tried 3 different Windows machines (I've installed/reinstalled drivers I don't know how many times!) and I even tried loading Linux on a spare laptop and that didn't work either.
So, I tried the next thing I could think of. I followed the instructions on the following site:
ramble.karrth.com - Section "Troubleshooting TWRP
which involved removing the back cover, shorting a circuit (to force usbboot) and plugging my Kindle in. This didn't work for me either.
At this point, I'm willing to try anything. I'm not quite sure how to fix this issue. I think my next step is to either order a factory cable or make my own and try that, but if my bootloader is broke (truely broke) will that even work?
Please, if I should post this in another forum/place, just let me know. Any help appreciated!
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
ChrisKenison said:
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
Click to expand...
Click to collapse
If you get the yellow triangle logo to come up, then it's probably in fastboot mode. If you reboot it while it's connected to your computer and you get some device detection beeps from Windows, it's likely to be a driver issue. Look here...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
You might want to read the first post in that thread too.
Watch carefully as the device boots up and you get the yellow triangle logo. If that boot logo comes up and stays there, it's in fastboot. If the boot logo comes up, the screens blacks out, and then the boot logo comes back up (dimmer) then it's either trying to get into recovery or booting into the OS and failing.
I would try setting the bootmode to normal in KFU and when it says "<waiting for device>" reboot the Kindle Fire. Since you have FFF, the fastboot program on your computer will wait for the Kindle Fire's FFF bootloader to get into temporary fastboot and reset the bootmode when the KF is ready.
But, the computer won't even recognize there is a device connected to it
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
And because its not recognized in the device manger, kfu isn't picking it up
Sent from my Galaxy Nexus using xda premium
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
If you can't get the drivers working with the KFU distribution, you'll have a harder time with the SDK. They are the same drivers, but KFU has an updated, Kindle Fire specific .inf file for the driver and also installs the .ini file in the .android folder that you'll need. I don't know what you see in the device manager, but if you don't get one of the devices shown in the post I referred to earlier, I would try another Windows machine. You won't be able to do anything without getting it to detect your KF and load the proper drivers. If you are more adventurous, you could try pokey9000's Firekit (search for it) and try using linux to send it fastboot commands.
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
yea mine is stuck on the firefirefire boot screen
ChrisKenison said:
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
Click to expand...
Click to collapse
Well, if you can't get any of those scenarios to work out, maybe it's a hardware issue. It might be something as simple as a bad USB cable or something more serious within the KF itself. I've never had a problem with Windows or Linux not seeing the KF, so my hands on experience in this regard is limited... my KF has never been broken to that degree. I'm always curious to see what's going on with people's KF when they say nothing works, but my KF has never given me that opportunity.
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
Sometimes in order to install the correct driver you need to delete the original from your computer because it will continue to attempt to revert to the default but beforehand try rebooting your computer and the kindle
---------- Post added at 07:41 PM ---------- Previous post was at 07:39 PM ----------
mistaanime said:
yea mine is stuck on the firefirefire boot screen
Click to expand...
Click to collapse
Run the kf utility again install twrp and fff again
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Sounds like it's stuck in fastboot bootmode to this noob. I had the same problem at one point and used command line to fix with the simple bootmode switching commands - can't recall if I used fastboot or adb tools..but either should work. And if I'm reading your post right, you've tried these so this is likely above my meager skill level, heh. You are handling it better than I did, I might add.
If I may point out where you went wrong:
Mattamus Prime said:
After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
Click to expand...
Click to collapse
There are apps in the Google Play store that will temporarily remove your root status so you are able to use services that detect and shut down when root is detected. OTArootkeeper.apk is one that I've heard of.
And don't ever chose to lose fff once you have that as this is your lifeline to unbricking.
Hopefully someone with better chops than I on this will post up - continue with your patient reading and take a little comfort that this is most probably fixable.
First off, I applaud you for trying to figure out and fix the problem yourself using the guides available. Thank you. The information you provided will go a long way to getting the help you need.
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Once you have done that and you still can't change your bootmode, try using recovery to flash a custom rom. It's possible the stock boot image you have has been corrupted. You can use the "mount" function in recovery to push another rom to your sdcard. If that works you can stick with a custom rom like MoDaCo. It's the same stock stock interface with Google apps and services installed and you don't have to worry about OTA updates. OTA Rootkeeper will let you easily switch between "rooted" and "unrooted" so you can take advantage of Amazon's VOD.
And if you still want pure stock you can d/l a new copy of the update and try again.
Thanks for the suggestion. I did try OTA Rootkeeper, but when I went into my Instant VOD, it still had the buttons grayed out. I tried temp unroot, reboot Kindle, and still grayed out, so I assumed Rootkeeper wasn't working for me, thus, the looking for the unroot tutorials.
A little bit of extra information, when I hook up my Kindle Fire, my drivers says Android Composite ADB Interface. When I try to switch to Fastboot to have it switch to Android ADB Interface, it doesn't switch. It just stays as Composite.
Thanks again.
soupmagnet said:
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Click to expand...
Click to collapse
I followed the advice in the Beginners Guide, uninstalled whatever drivers I had, rebooted my comp, then installed the ones that came with the KFU download.
Are there any other drivers I should be looking for?
Also, a little bit of more information, I tried switching to Fastboot through KFU, received some messages to the effect of "system/some file name file not found (2)", (I apologize for not being specific, typing from memory), it then reboots my Kindle Fire, then I execute the commands:
fastboot getvar product
After that, it just says <waiting for device>
In fact, after any command I do in cmd, I get that message. So I believe it may be a driver issue, like was suggested, or my Kindle isn't far enough into the boot process to be found.
It definitely sounds like a driver issue. Keep working on your drivers.
If that doesn't work, you can try it on a different computer OR set up a Linux LiveUSB for issuing adb/fastboot commands.
FIX for Kindle stuck on logo
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
MattamusPrime said:
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Click to expand...
Click to collapse
K_Krish said:
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
Click to expand...
Click to collapse
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
me too
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
I am stuck at the very same place you are. I was in an endless bootloop after trying to flas back to the Stock Amazon ROM using TWRP. Once i got the drivers sorted out and ADB could see my device i used KFU to "Install permanent Root with Superuser". The KF went to reboot into fastboot and the screen said "waiting for device" for about ten minutes. Now the KF is stuck at the white and orange "kindle Fire" boot logo. Windows will no longer see the KF as an android device. It only shows up as an "unknown device" in the device manager.
Try this
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Ok, I dont know, how to fix this (as I was not in this situation). Try following the steps - Download update.zip through KFU. Connect your Kindle to PC and install the android driver. If your PC detects the kindle copy update.zip file to kindle and try to install that.
sounds like a job for this http://forum.xda-developers.com/showthread.php?t=1392693&highlight=info
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Im in the same boat you are. I have tried everything stuck on same logo device is recognized in devices as android phone and adb interface but cannot connect to unbrick utility or KFU and doesnt show as a drive either. tried to search devices in cmd using fastboot commands and nothing shows either. I decided to purchase a factory cable today on ebay. Keeping my fingers crossed because after reading everything I could find I think it is my only option.
No, your problem is as "simple" as fixing your drivers so the computer can communicate with the device through adb and fastboot. KFU relies on those two tools to do pretty much anything. Unfortunately, Windows is stupid and is not very effective when dealing with certain USB devices.
In order to, say, install TWRP, you need adb to change the bootmode to accept fastboot commands, and use fastboot commands to overwrite the recovery partition. In the process of going between different boot modes, Windows had a hissy fit and decides not to communicate with the device at all. Hence the need to fix/reinstall the drivers. It doesn't always work out that way and you get stuck where you are right now. A factory cable will put you in fastboot, but it wont make Windows communicate with the device. You can continue to fight with Windows drivers and hope to get lucky, or you could try other, more effective options...
http://forum.xda-developers.com/showpost.php?p=30629067
omg .... I survived a bricking. Soupkit saved me!!!
Somewhere on the many tabs I have open, as I frantically search for ways to unbrick my Kindle fire... I run into " SoupKit" for Linux ... install it... mess around with the Bootloader .. change it to 4002 I believe the value was ... my Kindle that I've been working on for literally 6 hrs is back on! ... now on the figuring out how to root it / remove demo software. SOUPKIT!
E]
I tried to install twrp and now my kindle fire hd 8.9 and now it does a boot loop. I've tried to get into the fast boot or use the kindle fire unbrick utility but the reboot doesn't let it get a chance to connect. I believe I used the wrong twrp version and or messed up with a setting in the kindle flash app. I bought a factory/fastboot cable and want to know how to fix this. It's not here yet but I want to know how to fix it despite this. I've tried the majority of methods including the kindle utility. When I go to recovery it just hangs on a black screen. My computer recognizes it but ADB/Kindle Fire Utility do not. my PC recognizes it with a funny name and lets me open it and it's files. It's rooted and I don't know how to check bootloader. Thanks in advanced!
I am new at this myself, I was stuck in a bootloop myself & I to had trouble getting ADB to work, sounds as tho you don't have the drivers installed yet. The part in the directions that seems to be left out is to click on "show all" then click next. I waited forever for the list. So, control panel> device manager> (right click on the troubled device) >update drivers> pick from list> click " SHOW ALL"> hit next then at the bottom> wait for it, wait, waiting. When the list comes up, go down to Google and click it> click next, i think it was, then you should see ADB drivers. If it worked you should now see your device in the device manager under Android device. Now I don't remember where I got the files to bring it back to stock but, I think under one of "DragonFire's" post he had perfect directions to recover back to stock, I think the files might be there as well. I hope this helps you, I too have yet to get a rom to flash right and have used the ADB to reset a few times now. Time for me to try to again