1) Yes I checked search results.
2) Yes I've googled.
3) Yes I've tried the Kindle Fire Utility, the http://forum.xda-developers.com/showthread.php?t=1356257... links options.
With that being said, here's my issue;
Got a KF a couple days ago...
Yesterday, followed some online instructions to put GO Launcher EX on there to replace the carousel deal.
Followed instructions to the T.
Restarted. Got to "Choose your OS" screen (or whatever it precisely says...)
Picked GO... then it froze.
Now, when it restarts (yes, its the 30 second hard restart), it gets stuck on the Kindle Fire splash screen.
I have tried the above utilities.
I have hard restarted.
I have fully charged and ran the battery dry and tried again.
When I use the utilities, the problem is, my PC will not recognize the Kindle (it see's it as a removable storage device, but it doesn't click over to 'Kindle', and thus the utilities can't interact with the device itself, I suppose).
I've tried different USB ports and connecters (I have 2 regular kindles in the house, too). But I know all the peripherals work through cross-testing.
Essentially, what else can I do? (I got it from WalMart, and they're currently out of stock, so I can't return it till next week, but I'd like it fixed before then if possible)
I've tried several different methods from these forums too, but I *always* hit the same snag... whenever any utility is 'waiting for device', it simply will not find it, because the PC doesn't see it properly. It sees *something* (removable storage) but not as a kindle, and thus won't allow the utilities to interface with it.
Are there any physical things I can do to hard reset it without destroying any warrantys?
Any help appreciated!
there is no need to return it
from what you say i think you have a bad launcher on it and the kf tries to start it but can't
first i need to know if you have fff (custom bootloader - yellow triangle) on it ?
then do you have a recovery (twrp) on it ?
what os/bit of computer ?
In kindle utility go to bootmodes and enter normal (4000). Just had that problem last night.
awidawad - I've tried that. It stays on 'waiting for device' forever. Please explain step by step what you did? At which point did you power on the KF, when did you run KFU, etc, etc.
b63 - I hope your right!
no - I do not have the yellow triangle.
no - I do not have TWRP on it, i have tried, but cannot get anything onto the kindle.
my PC is window7, 64bit
Euryon said:
awidawad - I've tried that. It stays on 'waiting for device' forever. Please explain step by step what you did? At which point did you power on the KF, when did you run KFU, etc, etc.
Click to expand...
Click to collapse
Do you have all the kf drivers installed on your computer? I know that when I unbricked mine I had all the drivers installed but I had to reinstall them for some reason. If you do not have them I can post them later on tonight when I'm at home. However, I have TWRP installed on mine, and Cyanogenmod 7.2, so hopefully yours is able to connect to your computer.
---------- Post added at 12:56 PM ---------- Previous post was at 12:50 PM ----------
b63 said:
there is no need to return it
from what you say i think you have a bad launcher on it and the kf tries to start it but can't
Click to expand...
Click to collapse
In order to remove the bad launcher, you need to have your device connected to your computer to remove it using adb.
ok so b63 helped me out big time here....
about 2 hours ago we got on a teamviewer session (download this if you want these guys to help you with serious issues!)
took me a minute to figure out how to allow him/her proper access to my screen
anyway
i don't understand the technical stuff
but
what i had done wrong is that i didnt root the KF before trying to install the GO... software (i think)
b63 had a heck of a time trying to discern the problem with me being about as useful as a dead fish, but get there he/she did
after much fanangaling, b63 managed to install the TWRP and ADP on my KF, allowing it to fastboot, and basically allowing it to be read by my PC, and so fixed.
im sure it would have taken b63 all of 5 minutes in real time, but using the quirky teamview and my slow net speed didn't help
still, thanks VERY MUCH to b63 for fixing the **** out of my KF, and being very helpful and patient all along!
thanks
Just wanted to drop b63 a note here that I "thanks"ed their post above - not necessarily for the post but for going above and beyond. The people on these forums are (for the most part) really great. (Too bad there have to be a few who are demanding of the developers to get this feature or that fix done faster without taking into account that the devs do this all in their free time.)
YES, search finally led me here!
Euryon, I have the exact same thing happening with my KF right now.
Do you remember any specifics of how b63 carried out the steps you listed?
b63, any chance you could help me with mine? My issue is identical with Euryon's down to the letter.
Same Problem
Could someone please help me i have the same problem
same problem here! please can someone give a step by step? My fire is unrooted and I did nothing to it except try to install the go launcher and after I selected it as the default launcher it got stuck at the kindke fire logo.
I tried the Kindle unbricking utility but it cannot find the device even after I installed the adb composite interface
also, my fire is not showing up as a kindle - it is showing up as an android device.
rollno88 said:
also, my fire is not showing up as a kindle - it is showing up as an android device.
Click to expand...
Click to collapse
Have you added the fires usb ID to your system?
Sent from my Amazon Kindle Fire using Tapatalk 2
thanks for replying, and I have no clue how to do that. I'll search and get back .
---------- Post added at 10:12 AM ---------- Previous post was at 09:57 AM ----------
okay, I already did that by editing the android sdk(as a prerequisite to rooting, which I planned to do eventually) - so when I connect my fire it first shows up as a kindle, and after updating the software through windows and installing drivers through KFU, it comes up as an android device and the interface is adb composite. Now if I try to install TWRP through KFU it keeps switching between adb composite interface and plain adb. And both KFU and KUFU keep waiting but are unable to find my device.
also, my fire alternately shows up as a usb composite device and an android device. PLEASE help
okay I solved it with KFU (finally!) although I have no clue how I did it as I didn'tdo anything I hadn't tried earlier so, managed to install TWRP and then wiped everything and finally my fire could be read - then I deleted go launcher and now my fire is back from the grave
A big thank you to all the helpful posts at this forum - u guys are the best
Same issue
Tried rooting my KF, but couldn't change permissions and thus could not install android market. Superuser didn't do anything other than show me a log folder that had no logs. Tried to change permissions on /system and /apps with one of the file management apps on amazon and it said the device *wasn't* rooted, despite GO launcher and android interface.
Did a factory wipe to try to reroot or fully(?) root the KF, and that's when it all went wrong. Got stuck on boot loop, but KFU helped me break out of that. Now it's stuck on the Kindle Fire splash screen with no animation. I read somewhere that this was the fastboot getting "stuck."
At any rate, i have TWRP 2.0 installed and can mount and unmount the device in its interface, but it is only recognized as ADB android device, or when mounted via TWRP, USB composite device. As such, ADB commands only work occasionally - all other times it simply says <waiting for device>.
I am running Windows 7 64 bit, and 6.3 on the KF. All restarts on the KF are hard restarts, except occasionally cmd lets me fastboot reboot.
I have spent the past 2 days trying everything I have found online (2 KF unbrick applets, 15+ tabbed browsers with different threads) to no avail. I am finally posting, pleading for assistance.
Thanks in advance for any (helpful) replies. Real thanks clicking afterwards.
edit: when rerunning KFU, i kept getting the message that many execs failed because "/system/bin/sh" directory does not exist.
I don't know if that helps narrow down what might be happening, but I saw that coming up a lot in the cmd prompt.
zeissbickham said:
Tried rooting my KF, but couldn't change permissions and thus could not install android market. Superuser didn't do anything other than show me a log folder that had no logs. Tried to change permissions on /system and /apps with one of the file management apps on amazon and it said the device *wasn't* rooted, despite GO launcher and android interface.
Did a factory wipe to try to reroot or fully(?) root the KF, and that's when it all went wrong. Got stuck on boot loop, but KFU helped me break out of that. Now it's stuck on the Kindle Fire splash screen with no animation. I read somewhere that this was the fastboot getting "stuck."
At any rate, i have TWRP 2.0 installed and can mount and unmount the device in its interface, but it is only recognized as ADB android device, or when mounted via TWRP, USB composite device. As such, ADB commands only work occasionally - all other times it simply says <waiting for device>.
I am running Windows 7 64 bit, and 6.3 on the KF. All restarts on the KF are hard restarts, except occasionally cmd lets me fastboot reboot.
I have spent the past 2 days trying everything I have found online (2 KF unbrick applets, 15+ tabbed browsers with different threads) to no avail. I am finally posting, pleading for assistance.
Thanks in advance for any (helpful) replies. Real thanks clicking afterwards.
Click to expand...
Click to collapse
Read this...
http://forum.xda-developers.com/showthread.php?t=1552547
with an emphasis on post #2. You need to know what mode your device is in by looking at the device manager and make sure your drivers are loading correctly for that mode. If you can get to TWRP, you can mount your USB mass storage device, copy a new zip file of either the stock software or a custom ROM and flash it.
Thank you. I will be trying this shortly.
fully bricked
I followed the guide and got to a point where the Kindle Fire animation was playing. It loaded up to the unlock screen and then automatically shut itself down - would not stay on when either connected or disconnected. Tried installing a ROM but still shut down. Started the recovery and hit factory reset, still auto shutdown. Tried clearing a partition as described in the tutorial and now it's fully bricked. Will not turn on when connected to computer, to outlet, to another cable.
Thanks for trying to help.
Related
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Sounds like it's stuck in fastboot bootmode to this noob. I had the same problem at one point and used command line to fix with the simple bootmode switching commands - can't recall if I used fastboot or adb tools..but either should work. And if I'm reading your post right, you've tried these so this is likely above my meager skill level, heh. You are handling it better than I did, I might add.
If I may point out where you went wrong:
Mattamus Prime said:
After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
Click to expand...
Click to collapse
There are apps in the Google Play store that will temporarily remove your root status so you are able to use services that detect and shut down when root is detected. OTArootkeeper.apk is one that I've heard of.
And don't ever chose to lose fff once you have that as this is your lifeline to unbricking.
Hopefully someone with better chops than I on this will post up - continue with your patient reading and take a little comfort that this is most probably fixable.
First off, I applaud you for trying to figure out and fix the problem yourself using the guides available. Thank you. The information you provided will go a long way to getting the help you need.
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Once you have done that and you still can't change your bootmode, try using recovery to flash a custom rom. It's possible the stock boot image you have has been corrupted. You can use the "mount" function in recovery to push another rom to your sdcard. If that works you can stick with a custom rom like MoDaCo. It's the same stock stock interface with Google apps and services installed and you don't have to worry about OTA updates. OTA Rootkeeper will let you easily switch between "rooted" and "unrooted" so you can take advantage of Amazon's VOD.
And if you still want pure stock you can d/l a new copy of the update and try again.
Thanks for the suggestion. I did try OTA Rootkeeper, but when I went into my Instant VOD, it still had the buttons grayed out. I tried temp unroot, reboot Kindle, and still grayed out, so I assumed Rootkeeper wasn't working for me, thus, the looking for the unroot tutorials.
A little bit of extra information, when I hook up my Kindle Fire, my drivers says Android Composite ADB Interface. When I try to switch to Fastboot to have it switch to Android ADB Interface, it doesn't switch. It just stays as Composite.
Thanks again.
soupmagnet said:
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Click to expand...
Click to collapse
I followed the advice in the Beginners Guide, uninstalled whatever drivers I had, rebooted my comp, then installed the ones that came with the KFU download.
Are there any other drivers I should be looking for?
Also, a little bit of more information, I tried switching to Fastboot through KFU, received some messages to the effect of "system/some file name file not found (2)", (I apologize for not being specific, typing from memory), it then reboots my Kindle Fire, then I execute the commands:
fastboot getvar product
After that, it just says <waiting for device>
In fact, after any command I do in cmd, I get that message. So I believe it may be a driver issue, like was suggested, or my Kindle isn't far enough into the boot process to be found.
It definitely sounds like a driver issue. Keep working on your drivers.
If that doesn't work, you can try it on a different computer OR set up a Linux LiveUSB for issuing adb/fastboot commands.
FIX for Kindle stuck on logo
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
MattamusPrime said:
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Click to expand...
Click to collapse
K_Krish said:
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
Click to expand...
Click to collapse
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
me too
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
I am stuck at the very same place you are. I was in an endless bootloop after trying to flas back to the Stock Amazon ROM using TWRP. Once i got the drivers sorted out and ADB could see my device i used KFU to "Install permanent Root with Superuser". The KF went to reboot into fastboot and the screen said "waiting for device" for about ten minutes. Now the KF is stuck at the white and orange "kindle Fire" boot logo. Windows will no longer see the KF as an android device. It only shows up as an "unknown device" in the device manager.
Try this
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Ok, I dont know, how to fix this (as I was not in this situation). Try following the steps - Download update.zip through KFU. Connect your Kindle to PC and install the android driver. If your PC detects the kindle copy update.zip file to kindle and try to install that.
sounds like a job for this http://forum.xda-developers.com/showthread.php?t=1392693&highlight=info
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Im in the same boat you are. I have tried everything stuck on same logo device is recognized in devices as android phone and adb interface but cannot connect to unbrick utility or KFU and doesnt show as a drive either. tried to search devices in cmd using fastboot commands and nothing shows either. I decided to purchase a factory cable today on ebay. Keeping my fingers crossed because after reading everything I could find I think it is my only option.
No, your problem is as "simple" as fixing your drivers so the computer can communicate with the device through adb and fastboot. KFU relies on those two tools to do pretty much anything. Unfortunately, Windows is stupid and is not very effective when dealing with certain USB devices.
In order to, say, install TWRP, you need adb to change the bootmode to accept fastboot commands, and use fastboot commands to overwrite the recovery partition. In the process of going between different boot modes, Windows had a hissy fit and decides not to communicate with the device at all. Hence the need to fix/reinstall the drivers. It doesn't always work out that way and you get stuck where you are right now. A factory cable will put you in fastboot, but it wont make Windows communicate with the device. You can continue to fight with Windows drivers and hope to get lucky, or you could try other, more effective options...
http://forum.xda-developers.com/showpost.php?p=30629067
omg .... I survived a bricking. Soupkit saved me!!!
Somewhere on the many tabs I have open, as I frantically search for ways to unbrick my Kindle fire... I run into " SoupKit" for Linux ... install it... mess around with the Bootloader .. change it to 4002 I believe the value was ... my Kindle that I've been working on for literally 6 hrs is back on! ... now on the figuring out how to root it / remove demo software. SOUPKIT!
E]
So, Ive been searching for over 6 hours now and I really cant seem to root my kindle fire. I tried basically everything, and when things went wrong, I just deleted the files and started again. On my last try, I was able to fastboot it (at least I think so). When I ran KFU, ADB was online and Boot: 4002.
When I tried to root it always got stuck trying to find twrd.img. Then I tried option number 4, Installing Clockwork Recovery (because option number 3 was a dead end) and twrd.img was installed. But everytime something seemed to go right, the process wouldnt finish, it would just be <waiting for device>. I thought my problems would be over, so I tried to root it again. Now whenever I turn on the device, KFU is unable to locate my kindle, and it doenst appear on the device managing tab either. Even using the kindleunbrick.bat that worked for me the last times, it just gets stuck at <waiting for device>. ADB is offline and Boot: Unknown for now.
I really need to root my kindle because I dont live in America, so I dont have access to most stuff. I already changed the language when installing the driver, however, everytime I hooked my kindle up, a windows message would pop out saying that there was a problem with the driver, but when I went to device managing tab and tried to uptade the driver to "user\.android" it always came back as updated.
I am really noob at this, but I have read all the guides I found and something always went wrong. I hope someone can help me with this, please.
Thanks
Is your kindle turning on? If I could suggest you should put off anymore attempts to root your device till you know precisely what your doing and why. My biggest guess right now is your drivers are the greatest pitfall. You seriously don't want anything going wrong with them in the process of sending recoveries boot loaders or rooting you will end up with a really fancy paperweight. Privy to to attempting anymore you need to know that your drivers are functioning 100%.The fact that you pushed cwmr to your device after twrp should hurt a thing hopefully one should overwrite the other if all goes well . Since rooting is the primary goal go with that until you have verified root then recovery and bootloader can be done easily later with safer methods. Hold off awhile as long as your device will boot until you have found the knowledge and support to make it happen right. Start here http://forum.xda-developers.com/showthread.php?t=1552547 then go here http://forum.xda-developers.com/showthread.php?t=1638452 plan to use this method to root http://forum.xda-developers.com/showthread.php?t=1568340 ask a lot of questions don't be hasty or you will spend a lot of time trying to fix it instead of enjoying it.
As I said, I read all those guides already. I can use my kindle normally, but when I connect it to my computer, it is unrecognized. I tried every method I found to root, even though I just wanted to watch stuff and download a few games for my spare time(my intention was to watch stuff from premium features, but Im not really sure if root will allow me to do that from a foreign country*, so Im a little hesitant to extend premium).
I guess I wont try anything else for now because my main goal was reading, and this I can still do, but I am puzzled with the fact that I was unable to root it. Ill try to understand a bit more (hopefully with some tips). Thanks
*Geographical restrictions
OK well youve read the guides but in what you say it appears you are doing some of the wrong things why would you unbrick if your not bricked? Your drivers are your only issue as of this point but your methods are pushing you close to bricking your kindle. I would like to see you succeed in rooting your device and avoid bricking it.
---------- Post added at 11:59 PM ---------- Previous post was at 11:36 PM ----------
When your around we can try to get your drivers working
It would be nice to know what os your running on your computer. If you are on windows 7 use system restore to roll your computer back to a date before you started messing with the drivers or anything. Once it completes plug your kindle into your computer check to see if you can access the SD card contents and if it appears as a kindle in your device manager. Important now if all is good unplug your kindle and run the .bat file that comes with kfu. Then plug your kindle in let windows install the driver. Open up kfu find the tools folder shift plus right click select open command window here. Then type adb devices if its followed by a string of numbers this shows your kindle connected via adb . At this point you should obtain some help from some of the pros here at xda at fastboot and adb commands to safely root your kindle. If you decline and still wish to use kfu then only select install permenant root. If at any point in this process it fails and you loose adb connection do not unplug your kindle run the driver file again then recheck device status with kfu I believe its option 0 to see if your back online again. Pay attention to the dialogue that takes place in the kfu window you see verbatim that says failed or permission denied then quit after that. One important thing is you need to allow installation from unknown sources in the kindle settings on the kindle under device or it won't push the required files anyway.Wait to install twrp and fff until later there are easier safer methods. If your kindle hangs for a long time at the kindle fire logo select boot mode normal in kfu before unplugging. If at anytime kfu states waiting for device do not unplug it rather power it completely off then power it back on while connected .
---------- Post added at 01:53 AM ---------- Previous post was at 01:32 AM ----------
Just a side note I have rooted 4 different times with kfu without a single failure or mishap including the ones you are experiencing. I'm inclined to feel that relates mostly to your computer and drivers which makes kfu an unsafe approach for you I'm not responsible If you brick it!!!
I unbricked my device before I even came here, I tried an youtube tutorial and then it got stuck on the kindle fire logo, but after I unbricked it, it was fine. I know that something is going wrong, but Im following step-by-step the guides (at least I think so). As I said, everything was going correctly, ADB was online, Boot:4002, but when I tried to root it would be on an endless search for the file twrp.img, and after I succesfully downloaded it (I guess), my computer is unable to find my Kindle.
I run Windows 7, but it isnt properly activated (my room mate threw out the serial code), I dont know if this would interfeer in any way. When I conect the kindle, it appears to be in USB mode and says that I can transfer files, but my computer wont even find it. Ill try to restore my computer now and then Ill come back.
I know that doing this is my responsibility, but not being able to download apps is pretty annoying, so I have to keep trying.
If you can get adb status online then, why don't you install TWRP manually? Or use the "smirkit"?
Once you get recovery installed, you're set.
Also, be sure to "disconnect" from USB storage mode before trying to use adb commands or they won't work.
I dont even know how to use ADB comands. Is there anyway to make my computer recognize my kindle other then doing a system recovery? I dont know how to do that, and after searching, they say I need the CD (which I dont have).
Shift+right click your KFU "tools" folder and select "Open command window here"
From there, enter:
Code:
adb devices
If the output is something like:
Code:
List of devices connected
123456789ABCDEF
then you can install TWRP
http://forum.xda-developers.com/showpost.php?p=23747804&postcount=3
If the output is:
Code:
List of devices connected
(null)
then you need to reinstall your drivers
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Thank everyone that helped me, I managed it!
Actually I was doing everything right, but I guess the problem was my computer, because when my girlfriend came over I tried connecting it to her netbook and it recognized my kindle. I just downloaded the kfu, installed drivers, reconected kindle and let it update, ran KFU and selected option 2. All done now
I have no idea why this didnt work before, but at least now I can really enjoy my kindle.
Thanks again!
saybhausd said:
I dont even know how to use ADB comands. Is there anyway to make my computer recognize my kindle other then doing a system recovery? I dont know how to do that, and after searching, they say I need the CD (which I dont have).
Click to expand...
Click to collapse
Not system recovery bud system restore two different things go to accessories system tools system restore choose a date chose to restore to that point. System recovery is way way different. Glad you got it going
Hello-
Quick background. I have a Kindle Fire with the CM9-Reloaded ROM installed. All was going well for a few weeks until my Kindle stopped connecting to the internet. I figured it was just a bug and wanted to reinstall the ROM or choose a different one.
I have FFF v1.4 (with the blue logo) installed. When I get to the screen that allows me to choose "Normal Boot", "Recovery", or "Reset Boot Mode" I choose the "Recovery" to go into TWRP; however, this doesn't happen. It puts me back into a loop to the same screen to choose again. I can do this over and over again and I'm still not able to get into recovery to get to TWRP.
I decided to see if I could use the Kindle Fire Utility to get to TWPR that way. Before everyone asks, my drivers are all updated and functioning properly. I uninstalled and reinstalled just to double check. When the Kindle is plugged in, I can go to the device manager and see my Kindle there. The problem is that KFU says I'm offline and I can get to any of the menus. When I plug in my Kindle I do get the little "bong" that tells me my computer recognized it.
Also, went to my laptop and downloaded the KFU and installed everything. Same result as with my desktop.
What else can I try? I have a factory cable, but I really don't know much about how to use it. I simply followed step by step instructions to root this when I originally got it. Any suggestions? I'd really just like to put this Kindle back to stock, re-root, and try it all over again to eliminate any potential issues in the future. Thanks in advance for your help.
Does "adb reboot recovery" not work from within the ROM either? You can try to reflash TWRP from fastboot, if you're feeling brave enough. Double check the hash first, though.
same boat
hello all
i am in need of dire help working on sister's inlaw kindle fire
i got the KFU newest one and verified the kindle was the newest version software
i started the KFU i must of missed a step and the kindle fire is locked on loadscreen (kindle fire) a soft brick i got the program that u say try and the system will not be found by it
i have removed and reinstalled the Adb rebooted my system and hard reboot kindle........the computer sees the kindle but not as kindle..........in device manger it shows up under the ADB section not the portable..........i only see the ADB there is no kindle hardware tab in windows explorer it is not listed
but it is listed in devices and printers under unspecified with the name kindle in there........... i can not access any info in the tab it list the name as kindle the rest are blank
please help i have no idea what to do on this one.........it is locked on the screen and i can not get the system to fully talk with each other to correct it using the methods u have posted
**note i went to a 2nd computer that has never had kindle or any ADB or any other program dealing with this the system is giving the same results as stated above the system sees it but does not know what it is ...thought it might be a overlapping driver issue on my computer
side note i am kind of poor and really do not have 200 bucks to buy a new one for her i have a week to fix with out getting caught help please
Dasanko said:
Does "adb reboot recovery" not work from within the ROM either? You can try to reflash TWRP from fastboot, if you're feeling brave enough. Double check the hash first, though.
Click to expand...
Click to collapse
No, adb reboot recovery doesn't work. How would I reflash TWRP from fastboot? I'm definitely a rookie at cmd work.
jeffjoleen said:
No, adb reboot recovery doesn't work. How would I reflash TWRP from fastboot? I'm definitely a rookie at cmd work.
Click to expand...
Click to collapse
By it not working, do you mean that it reboots normally?
"fastboot getvar product" to get the KF to stick with fastboot mode when it's loading the bootloader.
"fastboot flash recovery twrp.img" very important to double check the file hash to make sure it's not corrupt.
"fastboot reboot" only in case it doesn't automatically reboot on its own.
EDIT: Keep in mind fastboot mode uses a different set of drivers, so you may have to install those as well (included in KFU, along the ADB ones).
---------- Post added at 06:57 PM ---------- Previous post was at 06:49 PM ----------
Justugh said:
hello all
i am in need of dire help working on sister's inlaw kindle fire
i got the KFU newest one and verified the kindle was the newest version software
i started the KFU i must of missed a step and the kindle fire is locked on loadscreen (kindle fire) a soft brick i got the program that u say try and the system will not be found by it
i have removed and reinstalled the Adb rebooted my system and hard reboot kindle........the computer sees the kindle but not as kindle..........in device manger it shows up under the ADB section not the portable..........i only see the ADB there is no kindle hardware tab in windows explorer it is not listed
but it is listed in devices and printers under unspecified with the name kindle in there........... i can not access any info in the tab it list the name as kindle the rest are blank
please help i have no idea what to do on this one.........it is locked on the screen and i can not get the system to fully talk with each other to correct it using the methods u have posted
**note i went to a 2nd computer that has never had kindle or any ADB or any other program dealing with this the system is giving the same results as stated above the system sees it but does not know what it is ...thought it might be a overlapping driver issue on my computer
side note i am kind of poor and really do not have 200 bucks to buy a new one for her i have a week to fix with out getting caught help please
Click to expand...
Click to collapse
Please don't hijack other people's threads, start your own here on Q&A. Otherwise, handling with two completely different issues in the same place gets awfully confusing. Also, read this: http://forum.xda-developers.com/showthread.php?t=1552547
First, I'd like to thank the xda community for all of your help! This is the first time I've worked on an Android device. I started working on my niece's Kindle fire about 4 hours ago and everything I've read has been from this forum. She is leaving the country tomorrow morning and I would like for her to have her Kindle Fire working before she leave (which is why I'm turning to you guys). Here is what I know so far about the Kindle:
FFF v1.4a
TWRP v2.1.1
I've been using the following tools/utilities (Win 7 64):
Kindle Fire Utility 0.9.6
Kindle Fire Unbrick V1.0
From what she has told me, the Kindle fire was already rooted and had gedeRom installed (along with FFF and TWRP). She decided to change roms and was going to try Glazed. However, after following the instructions on how to prep the Kindle for the flash (wiping cache, dalvik cache, etc.), she wasn't able to mount the SD card on her kindle anymore.
My suspicion is she also wiped the SD card because there is nothing on it when I check through the TWRP file manager, but she won't admit it.
Now onto the issues. When booting into Normal Boot, FFF loads, tries to boot (obviously there is no ROM to boot to), so it will just simply loop back to the boot loader.
When I boot the kindle into the Bootloader, it will show up as ADB Android Interface in the Device Manager (from what I understand it is in fastboot here). The device ID matches that of this thread http://forum.xda-developers.com/showthread.php?t=1668159, I can also issue fastboot commands here. None of them seem to change anything.
If I choose to boot into recovery and load TWRP, the Kindle disappears from the Device Manager completely. I can't mount the SD Card, system, data, or cache. I cannot issue any commands from KFU, Unbrick, or command line.
So I've been trying to work from the FFF boot loader, since this is the only place my computer recognizes the Kindle. I've tried manually entering fastboot commands. While the fastboot commands seem to be responsive, upon reboot everything is the same. Using KFU achieves the same results. I've tried almost all the option in KFU, even tried Clockwork recovery (which installed, but I decided to go back to TWRP).
ADB commands do not work, I'm assuming this is because it is in fastboot mode. Any ADB command results in a 'device not found'.
It is always listed as ADB Android Interface in Device Manger, never as ADB Android Composite Interface on My PC .. which is where I think the problem lies, since I can't mount it. This is my nieve's Kindle, she originally rooted it and installed the drivers on her PC.
I've tried everything when installing/uninstalling the drivers. From the Android SDK, to the KFU drivers scrip, and a few driver downloads from different threads. When trying all different methods, I usually get a "Unknown Device". Eventually (I don't know how) it gets read again as ADB Android Interface and I'm back to square one.
Like I said, my knowledge and time is pretty limited. I'm sure this has been posted about 2 dozen times, but I simply cannot find a working solution for my problem. So if I missed an obvious step, or more info is needed, please let me know. I've read several threads, but after the 50th one I kind of just skim through them :angel:.
Thanks again in advance!
try the command fastboot devices see if you get a string of numbers
---------- Post added at 03:58 PM ---------- Previous post was at 03:57 PM ----------
there is a likelyhood that if you dont get a response it still can be drivers or the state the device is in...
I get the following response:
0123456789ABCDEF fastboot
I used 3 Windows PCs, 2 Macs, and 3 different USB cables (2 purchased from Amazon and 1 from an S III) ...
After all that, I had ruled out the cables. However, my job recently sent me a new RAZR MAXX to replace my BlackBerry, and I saw it still sitting in the box. I decided to try it, why not? I've tried everything else .. and as soon as I plugged my Kindle in while it was in TWRP (nothing would happen with any other cable) .. the ADB Android Composite Interface driver started intalling! I decided to try it another computer I was using and I had the same results. Boy, was my face red. I literally wasted hours trying to solve my issue.
I don't know the technical differences between the cables I used previously and the one that came with my new RAZR MAXX (which I'll be messing with soon ) .. but that did the trick for me!
I'd like to thank Thepooch for reaching out and trying to assist me with this. This is a great community, and I will definately try to continue being active now that I have an Android device to tinker with!
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
farkuldi said:
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
Click to expand...
Click to collapse
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Socially Uncensored said:
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Click to expand...
Click to collapse
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
farkuldi said:
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
Click to expand...
Click to collapse
The unbrick program didn't work. It just stayed there t <waiting for device>. How can I use the fastboot cable to fix it?
Thanks.
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
ezproxy said:
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
Click to expand...
Click to collapse
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
farkuldi said:
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
Click to expand...
Click to collapse
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
ezproxy said:
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
Click to expand...
Click to collapse
I'd say you didn't read the previous posts.
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
farkuldi said:
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
Click to expand...
Click to collapse
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Socially Uncensored said:
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Click to expand...
Click to collapse
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Gon Rouge said:
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Click to expand...
Click to collapse
post in correct forum
Fire Index: Which Amazon (Kindle) Fire Do I have?
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
jerry777888 said:
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
Click to expand...
Click to collapse
Repost what?
Sent from my ocean using XDA Labs