Hi, I'm stuck in twrp bootloop. When I connect my kindle to PC (Win7) sometimes it shows unkown device and sometime nothing happens. I've searched the web for solutions for 4 weeks and nothing helped me. I tried mount USB storage in twrp, nothing happens. I just want my PC (Win7) to recognize my kindle, then I will follow the instructions from other threads.
*I have a factory cable.
**If you need more information,tell me.
What do you mean by twrp bootloop? Does it keep booting into TWRP over and over?
You're most likely experiencing a driver issue. Try to follow the directions here: http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2 and see if it helps any. Just having the KF show up on the device manager is a good step forward, even if mounting usb storage isn't working.
Are you stuck in FFF or TWRP? What color is the Logo?
Drivers are the #1 cause of pain for KF owners trying to root. What steps have you taken to install the drivers? Are you using KFU?
You should be reading: if you havent
http://forum.xda-developers.com/showthread.php?t=1552547
More spesifically this post regarding how drivers should look, and what to do if they dont.
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
I'm stuck in TWRP. Every time I load the device I get to TWRP.
I've read the threads you provided, nothing helped.
I did ''add legacy hardware'' in device manager, now I got Android composite ABD Interface shown but it has the code 10 error.
Y.Always.Me said:
I'm stuck in TWRP. Every time I load the device I get to TWRP.
I've read the threads you provided, nothing helped.
I did ''add legacy hardware'' in device manager, now I got Android composite ABD Interface shown but it has the code 10 error.
Click to expand...
Click to collapse
Have you tried plugging in the KF, uninstalling every single driver relating to Android (even samsung android drivers!), the KF, restarting the computer, and then running install_drivers.bat included in KFU?
The bootloop is very easy to fix - you're most likely stuck in the Recovery bootmode (5001), so having fastboot or ADB set your bootmode to Normal (4000) will solve it, but first you need to sort out ADB/fastboot, which are showing a drivers problem.
As a side note, this probably happened because you are using an outdated FFF/TWRP. When this is fixed, it's in your best interest to update to the latest version of each (1.4a, 2.1.1 respectively).
Dasanko said:
Have you tried plugging in the KF, uninstalling every single driver relating to Android (even samsung android drivers!), the KF, restarting the computer, and then running install_drivers.bat included in KFU?
The bootloop is very easy to fix - you're most likely stuck in the Recovery bootmode (5001), so having fastboot or ADB set your bootmode to Normal (4000) will solve it, but first you need to sort out ADB/fastboot, which are showing a drivers problem.
As a side note, this probably happened because you are using an outdated FFF/TWRP. When this is fixed, it's in your best interest to update to the latest version of each (1.4a, 2.1.1 respectively).
Click to expand...
Click to collapse
I tried, (Have you tried plugging in the KF, uninstalling every single driver relating to Android (even samsung android drivers!), the KF, restarting the computer, and then running install_drivers.bat included in KFU?), but it didnt help.
I have TWRP 2.0.0.
now I dont even get unkown device. What else can I do?? I just want it to show on my PC.
Y.Always.Me said:
I tried, (Have you tried plugging in the KF, uninstalling every single driver relating to Android (even samsung android drivers!), the KF, restarting the computer, and then running install_drivers.bat included in KFU?), but it didnt help.
I have TWRP 2.0.0.
now I dont even get unkown device. What else can I do?? I just want it to show on my PC.
Click to expand...
Click to collapse
TWRP 2.0 included FFF, so you can use fastboot -
Issue "fastboot getvar product" and then plug in the KF, see if the fastboot driver is working. Otherwise, you're stuck on a driver problem again.
If it does list one device, then you can go with "fastboot oem idme bootmode 4000" and then "fastboot reboot". That should get you back on Normal bootmode and out of the TWRP bootloop.
Next would be updating both TWRP and FFF to prevent this from happening again, but there's the pending driver issue. I can't really add much more, other than carefully going through the post linked earlier, step by step.
Dasanko said:
TWRP 2.0 included FFF, so you can use fastboot -
Issue "fastboot getvar product" and then plug in the KF, see if the fastboot driver is working. Otherwise, you're stuck on a driver problem again.
If it does list one device, then you can go with "fastboot oem idme bootmode 4000" and then "fastboot reboot". That should get you back on Normal bootmode and out of the TWRP bootloop.
Next would be updating both TWRP and FFF to prevent this from happening again, but there's the pending driver issue. I can't really add much more, other than carefully going through the post linked earlier, step by step.
Click to expand...
Click to collapse
when I issue "fastboot getvar product" I get('fastboot' is not recognized as an internal or external command, operable program or batch file.)
Y.Always.Me said:
when I issue "fastboot getvar product" I get('fastboot' is not recognized as an internal or external command, operable program or batch file.)
Click to expand...
Click to collapse
Download KFU and then open a command prompt in the "tools" directory.
Idid, it says <waiting for devive>
I pluged KF, nothing happened.
then I restarted it and nothing happened.
I gess I'm stuck for good.
Y.Always.Me said:
Idid, it says <waiting for devive>
I pluged KF, nothing happened.
then I restarted it and nothing happened.
I gess I'm stuck for good.
Click to expand...
Click to collapse
Means you have a driver problem, which takes us back to the starting point. Can't do anything else until you manage to get the drivers installed properly, sorry. Alternatively, you can, on a different computer, download KFU and then run install_drivers.bat BEFORE you plug in the KF for the first time.
Dasanko said:
Means you have a driver problem, which takes us back to the starting point. Can't do anything else until you manage to get the drivers installed properly, sorry. Alternatively, you can, on a different computer, download KFU and then run install_drivers.bat BEFORE you plug in the KF for the first time.
Click to expand...
Click to collapse
I tried nothing happened.
If you are doing flashes and nothing is working go to mount and make sure there are no checks in the boxes for system and data if so remove them then reflash or restore a backup after restore or reflashing a rom go back and check to make sure those boxes still have no check inside them then reboot I have had frequent errors like this when flashing roms that have the gapp package prebaked into the rom I do not have this issue when flashing gapps seperately
I found that from 20% - 80% battery it takes 12 hours
Related
Hello Everyone,
I will try to provide as much details as I can from what I remember.
Basically, I tried to ROOT my device and install TWRP. However, I messed it up the first time. I tinkered with it for hours but it still couldn't work until finally, after hard resetting for the unlimited time, it booted up.
The problem though, is that it wasn't rooted and TWRP wasn't installed when it came up so I tried it again. Second try, second time it was messed up. Annoyingly, I don't know what I did earlier to make it work. The second instance it happened is just like the first.
Just to be clear, this isn't the boot screen where the kindle fire logo is animated (has reflections). In my case, its the logo as is, stuck on the screen just like that. Tried hard resetting, doesn't work.
What do I know?
1) From my earlier experience, it has lesser to do with the system (PC, Mac) and drivers since I managed to get it boot up again without being connected the first time
2) If I do connect it to the PC, it says Cannot Start Device/Unable to Start Device. Code:10. That's it. Even if I reboot the device, its still the same.
3) If you connect it to the Mac, it is detected in system preferences. Problem though is that I tried using adb and just like its windows counterpart, there are no devices detected.
THOUHGTS:
1) I know I just have to get it to be recognized and I can change the bootmode. Something's telling me that its a boot mode problem only. In my earlier V3X phone, I used to TP (testpoint) if anyone's familiar with that, or shortcircuit the board to get it out of the 'loop'. Do we have that with the kindle fire?
2) What operating system would it be easiest to get the device detected. I'm hoping that if there's lesser complications with the device being detected by the computer, be it mac, linux or windows, I can change the bootmode. my technical instinct tells me it has something to do with boot mode.
What have I done already?
1. Let me see, I believe I tried hard resetting it for ALOT of times already
2. Reinstalled drivers on PC. Used both Android and Kindle Fire Utility drivers. Even checked the /android folder
3. I'm using a Nokia Micro-USB cable. I'm not sure if that has any impact on the device or its effectiveness but I will try to pick-up another cable today and post later.
I would really appreciate if anyone can help. It sucks that I tried this just after unboxing the unit. I haven't even tried doing anything on it yet.
If you can help, ANY help would be appreciated.
Thanks mate!
had the same
1. use computer (windows - in my case windows xp)
2. nokia cable is fine (i use it too)
3. use kf utility .6
is your kf recognized by the computer ? (adb device or composite adm device)
have you tried to shutdown and startup your computer ? (not restart)
the entry for 18D1 in adb_usb.ini is missing - had to add it
the other entries are allready in version .6 android_winusb.inf
if you have troubles to remove old drivers use this:
http://support.microsoft.com/kb/315539/en-us
unplug/replug and install the drivers from .6 from scratch
it's not needed to reboot the computer - works immediately
waiting to get your status ...
b63 said:
had the same
1. use computer (windows - in my case windows xp)
2. nokia cable is fine (i use it too)
3. use kf utility .6
is your kf recognized by the computer ? (adb device or composite adm device)
have you tried to shutdown and startup your computer ? (not restart)
waiting to get your status ...
Click to expand...
Click to collapse
Did you solve your problem?
My kindle is recognized by my computer but it as either ADB device or Composite ADB device (depending on what drivers I use to install it). Problem is that it says Cannot start device. Code Error: 10. Tried shutting down/restarting PC, still the same.
updated my initial post again ... (ms-link)
yes solved it in minutes
make the additional entry in adb_usb.ini
use only the drivers from .6
i think best way is to disconnect the kf - uninstall all old drivers regarding adb device - connect kf - use only drivers from .6 utility - start utility - change bootmode - up again !
whats your status ?
i think best way is to disconnect the kf - uninstall all old drivers regarding adb device - connect kf - use only drivers from .6 utility - start utility - change bootmode - up again !
Click to expand...
Click to collapse
I did this but it still says device cannot be started.
make the additional entry in adb_usb.ini
Click to expand...
Click to collapse
0x18D1 -- is that what I'm supposed to add to adb_usb.ini?
yes exactly - the device changes between the two id's regarding the bootmode
and don't let the computer select the driver - select manually
b63 said:
yes exactly - the device changes between the two id's regarding the bootmode
and don't let the computer select the driver - select manually
Click to expand...
Click to collapse
Okay, so I followed the instructions to a T.
I followed the MS Link to remove all drivers and then plugged-in the kindle and installed it back again by specifically telling windows that 'I have a disk'. It still says Code 10.
If it would mean anything, I'm doing this on a virtual machine since the computers around me are all Windows 7s.
kaswistry said:
Okay, so I followed the instructions to a T.
I followed the MS Link to remove all drivers and then plugged-in the kindle and installed it back again by specifically telling windows that 'I have a disk'. It still says Code 10.
If it would mean anything, I'm doing this on a virtual machine since the computers around me are all Windows 7s.
Click to expand...
Click to collapse
all this works using windows 7
dustyjerran said:
all this works using windows 7
Click to expand...
Click to collapse
I did try this yesterday on Windows 7 but most guides I see do it on older versions. I will try again a little later. Thank you.
I tried it on Windows 7. Still the same error. Kindle is frozen and on Device Manager it says "This device cannot start. (Code 10)"
I ran into the exact problem yesterday. I thought I bricked my kindle. That was scary. Anyway, the problem is that you're stuck on fastboot, mode 4002 instead of a normal mode 4000.
Following rootzwiki.com/topic/12363-how-to-windows-install-twrp-20-on-your-kindle-fire/
You'll need to add a new vendor id (0x18d1). However, even with that the device still will not be recognized right away. Following another user's suggestion on that same thread, I let the battery drained out. Once that's done, reconnecting the Kindle will show up as simply "kindle" on the device manager instead of the normal "unrecognized device".
Then do the adb commands (even if it doesn't show any device attached)
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
Your device will reboot out of the stuck "kindle fire" logo screen. If your device goes dark after, it just means that the battery need to recharged first. Another scary moment for me. You can unplug and use the wall charger, much faster than charging by PC. After 5 - 10 minutes, you should get back to your normal screen. Then, just use the Kindle Utility to install TWRP.
You'll need to add a new vendor id (0x18d1).
Click to expand...
Click to collapse
I added this already
reconnecting the Kindle will show up as simply "kindle" on the device manager instead of the normal "unrecognized device".
Click to expand...
Click to collapse
Actually, the problem with mine is that it's detected. However, it shows up as Code:10, The device is unable to start.
Still, I'll try to drain it first, tinker with it next and see what happens. That or I'll wait for tomorrow and open the whole device already and see if I can OMAP it.
Mine also did show up as code 10, and sometimes code 43 ... I tried uninstalled the driver and reinstall it manually each time and eventually showed up as unrecognized ... so I tried the battery drain ... I even tried putting it in the freezer to quicken the drain but not sure if it actually help ..
I tried the battery draining. Nope, still didn't work
UPDATE: I take this back. After draining the battery, I would like to confirm that the issue has been fixed. Thank you, THANK YOU Everyone! )
I REALLY APPRECIATE THE EFFORT. HAPPY HOLIDAYS! )
A family member recently got a Kindle Fire, I tried to flash recovery but it got stuck in fastboot mode. Windows will recognize it as uknown device but Linux won't detect anything in fastboot or adb.
I will try battery drain out since kaswistry said it worked
If all else fails, I will try this.. http://forum.xda-developers.com/showthread.php?t=1405052
EDIT: nevermind lol, this worked.. http://forum.xda-developers.com/showpost.php?p=20619033&postcount=11 even though i tried it several times already..
I have the same problem too, the kindle fire stuck at the boot logo
kf utility show that when i try to restore or other option!
Changing bootmode doesent work at all
*imageshack/photo/my-images/10/60506677.png/[/url] (imageshack link)
KF utility status fastboot... offline
*imageshack/photo/my-images/834/kfustatus.png/
My computer have the right driver!
can anybody help me?
*sorry for my bad english*
Could it be that something destroyed my FireFireFire boot? My KF always gets stuck in fastboot when I try to flash ... obviously quite annoying.
u guys need to talk to vashypool in irc and he can fix it!! he fixed mine and mine was a complete brick
If it gets stuck in fastboot you need to run the command fastboot idme bootmode 4000 from the Android SDK.
Sent from my Kindle Fire using Tapatalk
In my case, i have tried to install the original 6.2 kindle firmware with TWRP. After that, the kindle staying stuck on the boot logo... This is me story... I think my kindle is stuck on fastboot! I tried to change bootmod with FK utility v.6
This is what kf utility gave me, when i try to reinstall twrp
imageshack.us/photo/my-images/10/60506677.png/
And this is the kf utility status
imageshack.us/photo/my-images/834/kfustatus.png/
Is anybody can say me, if my kindle is bricked for ever? Or have a solution
Happy holiday btw
#sorry for my poor english#
okay so i was trying to root my kindle fire and i didnt get su any where so then i tryed to install cwm and now its stuck at the yellow triangle and it wont go into recovery and it also will not connect to adb i need hellp ASAP
Install drivers as ADB composite with the Android SDK and then use this to change the bootmode
The link you posted is not working due to the period in the URL at the end.
Do not afraid. I have got the same experience Let God bless the search button
http://forum.xda-developers.com/showthread.php?t=1568340
unzip fbmode.zip
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
Your kindle will "get stuck" on the kindle fire screen, but really it's just in fastboot mode.
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img
Your device will now boot into twrp recovery, and flash the firefirefire bootlaoder. When done it will prompt you to reboot. Upon reboot you will get stuck on the "yellow triangle" screen of firefire fire.
fastboot oem idme bootmode 5002
fastboot reboot
Click to expand...
Click to collapse
My kindle got the 6.3 update -solved!!
This has got to be one of the fastest ways I have rooted 6.3 kindle update
i went on line here http://liliputing.com/2012/03/root-...ogle-play-store-with-kindle-fire-utility.html
downloaded the new kindle fire utility and ckick on Install permanent root with super user. got rooted in about 2 minutes with no trouble at all
thanks everyone for your help but i solved it what i was doing was unsing the kindle fire utility trying to instal latest firefirefire but it just sat there and so i just went into the utility and reinstaled the twrp and it booted normal!!
Bricked Kindle
Okay, I'm not having the same issue, but I'm pretty sure I've completely, irevicalbly, bricked my kindle.
I know that I'm not in Fastboot mode, I've experienced that issue and solved it with the KFU.
Here's what I did:
I used the KFU to root my kindle. That worked fine. I was able to load all the Google apps (which was my initial goal). Then, I got greedy and decided that ICS was my next step - oops.
I followed the instructions on the following site:
androidauthority.com/kindle-fire-miui-4-ics-55853/
Note: I know, I'm an idiot - I should have paid attention to comments! UGH!
After I did this, I now only get the firefirefire logo and that is it. I can't load/reload TWRP and I can't change my bootmode to normal or recovery. The thing is, no matter which computer I plug the device into, the computer won't recognize the device. I get a message saying something "malfunctioned" when I plug it in. I've tried 3 different Windows machines (I've installed/reinstalled drivers I don't know how many times!) and I even tried loading Linux on a spare laptop and that didn't work either.
So, I tried the next thing I could think of. I followed the instructions on the following site:
ramble.karrth.com - Section "Troubleshooting TWRP
which involved removing the back cover, shorting a circuit (to force usbboot) and plugging my Kindle in. This didn't work for me either.
At this point, I'm willing to try anything. I'm not quite sure how to fix this issue. I think my next step is to either order a factory cable or make my own and try that, but if my bootloader is broke (truely broke) will that even work?
Please, if I should post this in another forum/place, just let me know. Any help appreciated!
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
ChrisKenison said:
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
Click to expand...
Click to collapse
If you get the yellow triangle logo to come up, then it's probably in fastboot mode. If you reboot it while it's connected to your computer and you get some device detection beeps from Windows, it's likely to be a driver issue. Look here...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
You might want to read the first post in that thread too.
Watch carefully as the device boots up and you get the yellow triangle logo. If that boot logo comes up and stays there, it's in fastboot. If the boot logo comes up, the screens blacks out, and then the boot logo comes back up (dimmer) then it's either trying to get into recovery or booting into the OS and failing.
I would try setting the bootmode to normal in KFU and when it says "<waiting for device>" reboot the Kindle Fire. Since you have FFF, the fastboot program on your computer will wait for the Kindle Fire's FFF bootloader to get into temporary fastboot and reset the bootmode when the KF is ready.
But, the computer won't even recognize there is a device connected to it
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
And because its not recognized in the device manger, kfu isn't picking it up
Sent from my Galaxy Nexus using xda premium
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
If you can't get the drivers working with the KFU distribution, you'll have a harder time with the SDK. They are the same drivers, but KFU has an updated, Kindle Fire specific .inf file for the driver and also installs the .ini file in the .android folder that you'll need. I don't know what you see in the device manager, but if you don't get one of the devices shown in the post I referred to earlier, I would try another Windows machine. You won't be able to do anything without getting it to detect your KF and load the proper drivers. If you are more adventurous, you could try pokey9000's Firekit (search for it) and try using linux to send it fastboot commands.
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
yea mine is stuck on the firefirefire boot screen
ChrisKenison said:
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
Click to expand...
Click to collapse
Well, if you can't get any of those scenarios to work out, maybe it's a hardware issue. It might be something as simple as a bad USB cable or something more serious within the KF itself. I've never had a problem with Windows or Linux not seeing the KF, so my hands on experience in this regard is limited... my KF has never been broken to that degree. I'm always curious to see what's going on with people's KF when they say nothing works, but my KF has never given me that opportunity.
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
Sometimes in order to install the correct driver you need to delete the original from your computer because it will continue to attempt to revert to the default but beforehand try rebooting your computer and the kindle
---------- Post added at 07:41 PM ---------- Previous post was at 07:39 PM ----------
mistaanime said:
yea mine is stuck on the firefirefire boot screen
Click to expand...
Click to collapse
Run the kf utility again install twrp and fff again
I seriously need some help. My normally fierce Google-fu has failed me. I have searched countless threads on here (and elsewhere) and tried just as many solutions, but I haven't had any luck. My Kindle Fire is stuck at the "Kindle Fire" boot logo. I was using the KF utility, and ADB status was online, everything looked good. I chose the option to root and install TWRP. However, it couldn't grab TWRP through my corporate firewall/proxy, so it skipped it, placed my KF in fastboot (I think), rebooted, now I'm bricked.
Depending on which PC I use, and in what order it's plugged in, I get different results in the Device Manager (both Windows 7):
Home PC -
Hardware Ids = USB\UNKNOWN
Yes, I've tried loading drivers six ways from Sunday, and none worked.
Absolutely no solution involving ADB in any way will work until I can at least get Windows to recognize it correctly and load the proper drivers.
Work PC -
If I have the KF turned on when I plug it into my PC, I get the same result as on my home PC (though I don't think I tried plugging it in on my home PC while my KF was powered off).
If I have it turned off when I plug it in, my PC sees it as an "Android ADB Interface", with the correct hardware ids.
Even when it sees my KF correctly in Device Manager, I still can't get ADB to communicate with it.
I've tried FireKit on my Ubunutu 12.04 laptop, but it never sees my device, and gets stuck at the <waiting for device> message. I've tried countless driver iterations and many utilities, and none seem able to communicate with it while it's stuck at the logo.
Any help would be immeasurably appreciated!!
[UPDATE]
While my device was detected correctly in Device Manager (but still not able to communicate via ADB), I reloaded the drivers using the KF Utility. It is still detected as "Android ADB Interface" but with an error in Device Manager. The error is "This device cannot start. (Code10)". I uninstalled it, including drivers, and let Windows autodetect. It was identified as "kindle", so I ran the same driver package and it still sees it as "Android ADB Interface", but still with the error.
[UPDATE 2] - Steps I took to (finally) get mine working
Note: If your device is recognized in Device Manager as something *other* than "Unknown Device* (such as "kindle" or "Android ADB Interface"), skip to step 3.
1. Turn off the device.
2. Plug the device into USB to your computer. This should turn the device on.
3. Delete the ".android" folder from your Windows profile. This is very important. If you just uninstall the device and driver, Windows will still use this to reinstall the device. You want to start as fresh as possible to eliminate complications from previous attempts.
4. Uninstall it from Device Manager. Make certain to check the box to uninstall the driver as well.
5. Start a new scan for hardware changes in the Device Manager.
6. As mine was stuck in fastboot mode, it recognized the device as "kindle" (lower-case "k")
7. Run the "install_driver.bat" from the Kindle Fire Utility.
8. After driver install, run the Kindle Fire Utility.
9. ADB status will say "offline", that's fine.
10. Choose option 1 to go into the Bootmode Menu.
11. Choose option 1 to boot into Normal Mode.
12. It will be stuck at <waiting for device>.
13. Turn off the device, keeping it plugged into the PC. *very important* This step was one among others that made THE difference for me.
14. Turn on the device. *Hopefully*, you should immediately see the utility spit out some text and your device should reboot.
15. Boots up!! (well, mine did, and I had almost give up hope were it not for my pride and stubbornness).
Read this...
http://forum.xda-developers.com/showthread.php?t=1552547
with emphasis on device drivers.
"Android ADB Device" typically means the device is in fastboot mode and you cannot use adb while in fastboot mode.... you must use fastboot.
With your KF off and disconnected from your work computer, run this command...
Code:
fastboot -i 0x1949 getvar product
and then connect it to the computer. The KF will turn on automatically. The computer will say "<waiting for device>" for a bit, but if the command works, it will eventually return "product: kindle" as output. If that works, you can actually flash TWRP from there, but if you are anxious for it to do something again...
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
should get it booting normally again. If it doesn't, look at the link I gave you and focus on getting your drivers fixed. You won't be able to execute any commands (fastboot or adb) through Windows if the device drivers don't work. You might want to go back to Firekit if drivers remain problematic for you.
Everything you need to know to fix your KF is in that link at the beginning of my post, including the commands you need to run. At the bottom of post #3 is also another link to a how-to root/install ROMs page.
IT LIVES!!! While I was still getting the error code 10, I launched the KF utility one more time. ADB status was still offline. I went into the menu to modify boot mode, told it to boot in normal mode and it was stuck <waiting for device>. On a whim, I left it there and cycled power on my KF. It found the device, finished, rebooted, and it's good!!! The Device Manager is happy now too!!
The behavior was so odd between my work and home PC. I was seriously scared when it gave a bad device ids on my home PC. I think it was more a combination of several different things that helped, and I'll update my main post with all that I did to get it back (that I can remember). Hopefully it will help someone else.
This is an *amazing* community, and I can't thank everyone enough for the incredible work you all do and the true sense of selflessness exhibited here on the forums!
btw, How do I edit the subject to indicate it's solved?
^_^
OH ,MY GOSH I DO NOT NO HOW MUCH TO THANK U THNX FOR THE POST
jaetrix said:
OH ,MY GOSH I DO NOT NO HOW MUCH TO THANK U THNX FOR THE POST
Click to expand...
Click to collapse
Glad it could help someone! I was frustrated enough about it and couldn't find a single solution that fit my issue. I just had to combine some to get it to work for me.
Bump
Yes this saved two bricked kindles. Trial and error is sometimes the best means to solving a problem.
Sent from my GT-I900 using xda premium
This is happening alot here of recent thats why I bumped it to the top of the list
Thank you for this. Maybe a moderator will be kind enough to sticky this.
Sent from my Galaxy Nexus using Tapatalk 2
pugsley42 said:
I seriously need some help. My normally fierce Google-fu has failed me. I have searched countless threads on here (and elsewhere) and tried just as many solutions, but I haven't had any luck. My Kindle Fire is stuck at the "Kindle Fire" boot logo. I was using the KF utility, and ADB status was online, everything looked good. I chose the option to root and install TWRP. However, it couldn't grab TWRP through my corporate firewall/proxy, so it skipped it, placed my KF in fastboot (I think), rebooted, now I'm bricked.
[...]
15. Boots up!! (well, mine did, and I had almost give up hope were it not for my pride and stubbornness).
Click to expand...
Click to collapse
Pugsley42...you 'da man! I had the same story as you told above, including searching and following countless threads of instructions. Nothing worked until I found your instructions! Thank you, thank you, thank you!
Stuck at the KF logo
These steps still didn't work for me :-/ I'm still stuck with the KF logo and a "Waiting for device" prompt. I've read through these forums starting with the "KKFB" to this one and still haven't had any luck yet. It may be time to give up on her. I think I have royally messed her up.
If anyone else has any other suggestions I'm open i've tried everything else on here I can find.
Thanks
Neely
Neely said:
These steps still didn't work for me :-/ I'm still stuck with the KF logo and a "Waiting for device" prompt. I've read through these forums starting with the "KKFB" to this one and still haven't had any luck yet. It may be time to give up on her. I think I have royally messed her up.
If anyone else has any other suggestions I'm open i've tried everything else on here I can find.
Thanks
Neely
Click to expand...
Click to collapse
My first suggestion would be to read this:
http://forum.xda-developers.com/showpost.php?p=25884555
Neely said:
These steps still didn't work for me :-/ I'm still stuck with the KF logo and a "Waiting for device" prompt. I've read through these forums starting with the "KKFB" to this one and still haven't had any luck yet. It may be time to give up on her. I think I have royally messed her up.
If anyone else has any other suggestions I'm open i've tried everything else on here I can find.
Thanks
Neely
Click to expand...
Click to collapse
Agreed, you really need to be more specific. "Waiting for device" .... which part of the KF utility?. What *exactly* are you seeing, where? What does Device Manager show your KF identified as (keep in mind, there is a big difference between seeing it as "Kindle" and "kindle"). What *exactly* did you do that brought you to this point?
Symptoms. Symptoms. Symptoms. The more detail you provide, the more likelihood we can help.
Take heart. If there's anything I learned in my stubborn refusal to admit my KF was fully bricked, is that it can be brought back from a lot worse than we give it credit for. I also learned quite a bit that I never would have if I never failed. That's what I love about breaking things!
pugsley42 said:
Agreed, you really need to be more specific. "Waiting for device" .... which part of the KF utility?. What *exactly* are you seeing, where? What does Device Manager show your KF identified as (keep in mind, there is a big difference between seeing it as "Kindle" and "kindle"). What *exactly* did you do that brought you to this point?
Symptoms. Symptoms. Symptoms. The more detail you provide, the more likelihood we can help.
Take heart. If there's anything I learned in my stubborn refusal to admit my KF was fully bricked, is that it can be brought back from a lot worse than we give it credit for. I also learned quite a bit that I never would have if I never failed. That's what I love about breaking things!
Click to expand...
Click to collapse
Okay, I was attempting to load a ROM on it. It had been rooted already with no issues and then something happened during the installation of TWRP and spit out an error message of unable to load and then rebooted. That's where I am with the kindle fire boot screen.
As for the "Device Manager" It shows up as "Android Composite ADB Device" and with KFU it shows the following status:
ADB Status: Online
Boot Status: Unknown
At this point is when if I try to run Install Latest TWRP Recovery or FFFF or anything it just sits there and says "Waiting For Device"...
I've read though most of these posts and have tried several different suggestions with no luck so far. So I have actually read through here. :-/
Hope this helps at all.
I would try by trying to change the bootmode using the KF utility. If you're stuck at the KF logo on boot, then the other functions of the utility won't do anything. Your KF needs to be in a "usable" state before that can happen. Have you tried changing it to "Fastboot" or "Normal"?
Stuck at the KF logo
pugsley42 said:
I would try by trying to change the bootmode using the KF utility. If you're stuck at the KF logo on boot, then the other functions of the utility won't do anything. Your KF needs to be in a "usable" state before that can happen. Have you tried changing it to "Fastboot" or "Normal"?
Click to expand...
Click to collapse
Yeah, I've tried it using the KF Utility as well as using fastboot at the command line :-/
kinfauns said:
Read this...
http://forum.xda-developers.com/showthread.php?t=1552547
with emphasis on device drivers.
"Android ADB Device" typically means the device is in fastboot mode and you cannot use adb while in fastboot mode.... you must use fastboot.
With your KF off and disconnected from your work computer, run this command...
Code:
fastboot -i 0x1949 getvar product
and then connect it to the computer. The KF will turn on automatically. The computer will say "<waiting for device>" for a bit, but if the command works, it will eventually return "product: kindle" as output. If that works, you can actually flash TWRP from there, but if you are anxious for it to do something again...
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
should get it booting normally again. If it doesn't, look at the link I gave you and focus on getting your drivers fixed. You won't be able to execute any commands (fastboot or adb) through Windows if the device drivers don't work. You might want to go back to Firekit if drivers remain problematic for you.
Everything you need to know to fix your KF is in that link at the beginning of my post, including the commands you need to run. At the bottom of post #3 is also another link to a how-to root/install ROMs page.
Click to expand...
Click to collapse
Your explanation and guidance cut right to the solution for me. Thank you so much!
Thank you!!
I've been searching forever for this same issue. This has not fixed it completely but has helped me! Thank you for taking the time to post this!!
cmgroden said:
I've been searching forever for this same issue. This has not fixed it completely but has helped me! Thank you for taking the time to post this!!
Click to expand...
Click to collapse
I presume if any of this helped, you were able to get further than you have been. What state is it in now? What error(s) if any?
I seem to be having this same issue but I cannot get my pc to recoginze the kindle fire as anything. perhaps i did something wrong but i was following a video on youtube and though i was doing it exactly as it showed. First thing i did after I finally got the drivers loaded was start KFU and then chose to load TWRP. It started the process but when it hit the part about rebooting my device that's where it stopped. Since then i've been stuck at the white and yellow kindle fire logo. No matter what i do to try to reinstall the ADB drivers I cannot get my computer (win xp) to recognize the kindle. It shows as "unknown device" in device manager and when it's plugged in the little pop up says that the usb device has malfunctioned and windows doesn't recognize it. So am I totally dead? I'm assuming before i can do anything to recover it I need to get windows to recognize it with the ADB drivers.
Hey so a few weeks ago i tried to root my kindle fire, version 6.3.1 (to the best of my memory), on windows 7. I tried Kindle Fire Utility but the drivers wouldn't install so i found a different one and ended up bricking it. I was able to use an unbricking tool i found online which worked initially, but a couple of weeks later i restarted the kindle and now it is stuck in FireFireFire (yellow triangle), which i think is fastboot mode (correct me if i'm wrong). I have TWRP installed and have been able to load into it once, but was unable to fix the problem and now have been unable to load into it since. Kindle is mostly unresponsive now, but can turn on and off with the power button and turns on when plugged in. My computer recognizes the kindle as an unknown device and is unable to update the drivers. I have tried reinstalling the drivers from Kindle Fire Utility v0.9.9 dozens of times, yet still nothing. I went to the the "read before you post" thread concerning drivers and attempted to follow that process a few times, however after i have selected the new drivers and clicked next the computer determines that the best drivers are already installed, and prevents me from installing the new ones manually.
Thanks for reading, would be nice if i could fix this issue.
New user so i cant post links, I will put the link to the site i bricked it on in the comments if needed.
Just to get it out of the way: are you rooted?
If you are, try this:
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
Make sure you have ADB set up before trying this.
gadgetroid said:
Just to get it out of the way: are you rooted?
If you are, try this:
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
Make sure you have ADB set up before trying this.
Click to expand...
Click to collapse
No midroot it got stuck in fastboot.
Okay so i went and followed the instructions for installing drivers and was able to get my computer to recognize that it is an android phone when plugged in rather than an unknown device. Unbricking tools still wouldn't work, so i followed the instructions to the point where i need to do go to the "have disk" part. After selecting the proper drivers, the computer said that it couldnt update the drivers "since the device cant start (code 10)".
Mudk1p21 said:
Okay so i went and followed the instructions for installing drivers and was able to get my computer to recognize that it is an android phone when plugged in rather than an unknown device. Unbricking tools still wouldn't work, so i followed the instructions to the point where i need to do go to the "have disk" part. After selecting the proper drivers, the computer said that it couldnt update the drivers "since the device cant start (code 10)".
Click to expand...
Click to collapse
Unplug your device and try once.
I am total noob. Just want to make that clear from the get go.
I hesitate to start a new thread, but I have been working on this forever, and have not made any progress.
I have a Kindle Fire that I would like to run android on - I started the process with the Kindle Fire Utility v 0.9.9. Something went wrong, and it is now stuck on the Kindle Fire start up logo. I also can no longer see it in the device manager, nor is it responsive to anything in the Utility. (ADB status: Offline Boot Status: Unknown). I am at a loss, does anyone have any ideas? Your help is appreciated!
.................FIGURED IT OUT!..............................
Much thanks to the pooch who spent hours helping me troubleshoot.
What we (he) did, as far as I remember, hopefully this can be of some service to someone else out there.
1) Figured out that trying all of this on a Virtual Machine is not a good idea!
2) I somehow broke the bootloader in my first attempt, so none of my computers were recognizing the KF.
3) Created a Pendrive to run Linux (ubuntu). Here Requires a USB drive formatted Fat16/Fat32/NTFS, minimum of 2 gb.
4) Once I got Linux running, installed SoupKit.
5) Went through a few tries of booting, rebooting, into recovery mode until the Kindle flickered back to life!
6) Followed prompts on SoupKit to install TWRP, updated TWRP, install FireFireFire, install Android 4.2.
Good luck, I am happy to answer any questions - though I am no means an expert now.
What I have tried...more info
More Information:
I am running Windows7 in a VirtualBox on an iMac.
I bricked the Kindle a few weeks ago, after messing with it then, I bought a factory fastboot cable. Still no dice.
I have tried all turning on and off computer, on and off Kindle with it disconnected, connected, going through the KFU 4 seconds after starting the Kindle. Letting the Kindle's battery die, recharging.
I have deleted .android folder, reinstalled drivers, re-downloaded KFU.
I have tried on a different computer (Windows XP) The Kindle is also not recognized there.
I have tried booting into Ubuntu (however in the directions there, it said the FireKit is for more "serious" issues than my soft brick.
I am sure there is some small detail I am missing, but I have not been able to find it - and I am not knowledgeable enough to properly diagnose the problem. Again thanks for any help.
kyleboyd said:
I am total noob. Just want to make that clear from the get go.
I hesitate to start a new thread, but I have been working on this forever, and have not made any progress.
I have a Kindle Fire that I would like to run android on - I started the process with the Kindle Fire Utility v 0.9.9. Something went wrong, and it is now stuck on the Kindle Fire start up logo. I also can no longer see it in the device manager, nor is it responsive to anything in the Utility. (ADB status: Offline Boot Status: Unknown). I am at a loss, does anyone have any ideas? Your help is appreciated!
Click to expand...
Click to collapse
Sometimes KFU will show as Unknown even though it's really fine. I had the same issue as you. Try switching boot mode to Normal and see if that fixes it, it worked for me.
Read this (everything),especially third post.
http://forum.xda-developers.com/showthread.php?t=1552547
hemmulde 1st
zastava750 said:
Read this (everything),especially third post.
http://forum.xda-developers.com/showthread.php?t=1552547
Click to expand...
Click to collapse
Thanks for the reply!
I tried that. When I type "fastboot getvar product" it says waiting for device or something similiar.
The advice applying to Device Manager don't get me anywhere, because my Kindle doesn't show up.
Any other ideas?
kyleboyd said:
Thanks for the reply!
I tried that. When I type "fastboot getvar product" it says waiting for device or something similiar.
The advice applying to Device Manager don't get me anywhere, because my Kindle doesn't show up.
Any other ideas?
Click to expand...
Click to collapse
When using the stock bootloader (plain "kindle fire" boot logo), the fastboot command must always specify the custom vendor ID used by the Kindle Fire. For example, the commands above must be slightly altered to...
Code:
fastboot -i 0x1949 getvar product
fastboot -i 0x1949 devices
and likewise, all of the following commands will need the "-i 0x1949" switch when using the stock bootloader. The FFF bootloader's vendor ID has been changed to one that is normally recognized by fastboot, so the "-i 0x1949" switch can be omitted.
Now onto some more useful fastboot commands...
Code:
fastboot oem idme bootmode 4000
fastboot oem idme bootmode 4002
fastboot oem idme bootmode 5001
Using one of these commands will change the bootmode to normal (4000), fastboot (4002) or recovery (5001). Then issuing...
Code:
fastboot reboot
will reboot the device into the respective bootmode.
I've tried that as well...
Just so I am totally clear, this is what I did in relation to those instructions:
Opened Command Prompt - set the directory to C:/kfu/tools
Typed "fastboot -i 0x1949 getvar product" (with out the quotations, obviously)
<waiting for devices>
I plugged Kindle in, it powers on and the frozen logo pops up.
I also tried "fastboot -i 0x1949 oem idme bootmode 4000" and "fastboot -i 0x1949 oem idme bootmode 4002"
According to the guide it often takes multiple tries, I have done it over and over again.
I have also tried different orders of code, plugging in Kindle, and powering on and off.
Am I doing something wrong? Is there a specific code for my Kindle? (Not -i 0x1949)
Thanks!
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1660636
Reinstall the driver then use kfu to reset the boot mode to normal.
Drivers?
I did try this: http://forum.xda-developers.com/show....php?t=1660636
When I get to the part about the Device Manager, I am stuck, as nothing shows up (I suspect something do with drivers)
Thepooch said:
Reinstall the driver then use kfu to reset the boot mode to normal.
Click to expand...
Click to collapse
By reinstall drivers do you mean clicking on "install_drivers" in the KFU folder? I have tried that.
Is there another method of uninstalling and installing drivers? Sorry if that is a dumb question!
If the devices is in fastboot which I believe it is it would show up as android adb interface, if it was attempting to boot to the system it would show up as android composite adb interface. If you are on xp or windows 8 this can be a bit of a tricky task. Android adb interface and android composite interface are two facets of the same driver. So yes I suggest rerunning the driver installation bat that is packaged with KFU. If perhaps you are on windows 8 you must disable driver signature verification and reinstall the driver. 3.0 usb ports have an issue with fastboot and can leave the device undetected.
Still not working
Thepooch said:
If the devices is in fastboot which I believe it is it would show up as android adb interface, if it was attempting to boot to the system it would show up as android composite adb interface. If you are on xp or windows 8 this can be a bit of a tricky task. Android adb interface and android composite interface are two facets of the same driver. So yes I suggest rerunning the driver installation bat that is packaged with KFU. If perhaps you are on windows 8 you must disable driver signature verification and reinstall the driver. 3.0 usb ports have an issue with fastboot and can leave the device undetected.
Click to expand...
Click to collapse
Thanks for the quick reply.
So I am on a Win7 and/or a Windows XP. Currently on both systems, when I plug it into the computer, with the Device Manager open, nothing happens other than the Kindle turning itself on.
Before it froze up, I saw it in device manager as Android ADB interface, and before doing anything at all, saw it as the default Kindle Fire.
On the Win7 system, I have rerun the driver installation bat over and over and over again, with absolutely no results.
On the WinXP, I have tried it, and for the life of me can't get it to install (it says install failed (Unsigned)). I never connected the Kindle up to this computer before it froze up, so I wonder if that is somehow causing the problem (it is trying to update drivers that don't exist?)
Am I doing something wrong with this? Can I uninstall or delete drivers, and totally start over?
If you are using a WinXP you must install driver manually.
Drivers?
zastava750 said:
If you are using a WinXP you must install driver manually.
Click to expand...
Click to collapse
How do I do that, when the Kindle does not show up as being connected? All the guides I have found start off with accessing from the Device Manager. My Kindle does not show up in the Device Manager...
okay well then you`re running xp use another computer getting the driver installed is hard even for the very skilled particularlly when the device is stuck in fastboot. Friend or relatives computer running windows 7 would be perfect. Otherwise it`s linux on a live usb booted on your xp machine.
Windows 7 - No Dice
Thepooch said:
okay well then you`re running xp use another computer getting the driver installed is hard even for the very skilled particularlly when the device is stuck in fastboot. Friend or relatives computer running windows 7 would be perfect. Otherwise it`s linux on a live usb booted on your xp machine.
Click to expand...
Click to collapse
Yeah so I have a Windows7. I have reinstalled the drivers (by clicking on the install_drivers.bat file in the KFU) over and over again, and I still do not get any recognition on the computer, or in the Device Manager when I plug in the Kindle.
Try different usb port, make sure they are usb 2.0. Is the logo static or animated? It possible that you broke the bootloader. At some point I would be willing to look at some things for you via teamviewer. If it is not driver related I fear your next move is here http://forum.xda-developers.com/showthread.php?t=1430038. Keep it on charger or off till it can be dealt with.
Thepooch said:
Try different usb port, make sure they are usb 2.0. Is the logo static or animated? It possible that you broke the bootloader. At some point I would be willing to look at some things for you via teamviewer. If it is not driver related I fear your next move is here http://forum.xda-developers.com/showthread.php?t=1430038. Keep it on charger or off till it can be dealt with.
Click to expand...
Click to collapse
Thanks! I would be willing to give it a shot (teamview I mean) if you are willing.
I tried the Firekit before I began this thread, but I kept getting stuck trying to run the tool after booting into ubuntu. Perhaps that is a different thread topic, but I am more than willing to put more work into figuring that out, if it could be the key to unlocking this stupid thing.
I am having this exact same problem. Using Win XP i was able to get the ADB drivers loaded initially and used KFU to try to install TWRP. When it rebooted during that process it got stuck at the Kindle Fire logo. Since then I cannot get my computer to recognize the kindle. Like you, I feel like i've tried everything.
Nixnaegie said:
I am having this exact same problem. Using Win XP i was able to get the ADB drivers loaded initially and used KFU to try to install TWRP. When it rebooted during that process it got stuck at the Kindle Fire logo. Since then I cannot get my computer to recognize the kindle. Like you, I feel like i've tried everything.
Click to expand...
Click to collapse
Glad to know I'm not alone - misery loves company! Solidarity my friend.
I wish I could tell you I'd solved it, but alas, I have not. I'm still working on it, I'll keep you updated if I have any breakthroughs!