[Q] Galaxy Nexus CDMA, soft bricked? - Samsung Galaxy Nexus

So I've done all the research I can and can not figure out what I should do about my phone.
The complete story:
My power button was not responsive starting last night, after pulling the battery the phone began to work fine. The issue happened again today so I did a Backup of the phone using Clockworkmod, then flashed on old rom to see if the power button issue was "software related". The power button was still unresponsive and i went into recovery mode, but of course could not do anything because the power button didn't work to confirm any highlighted items. So once again i took out the battery and the phone will not turn on.
What I have done so far:
1)Plugged the phone in w/the battery in, and i receive a battery charging icon for about 8 seconds then it goes away and black screen.
2)Plug the phone into the computer without the battery and the computer recognizes the phone but under devices i get a blinking icon saying "OMAP 44440"
If I can get the phone on, I can gnex toolkit to return my device to fatory but I have no idea what to do next? Please help.

This sounds like a hardware problem. Your physical buttons should be functioning normally when your phone is powered off (e.g your power button). Sounds like you need a warranty exchange.

fire & ice said:
This sounds like a hardware problem. Your physical buttons should be functioning normally when your phone is powered off (e.g your power button). Sounds like you need a warranty exchange.
Click to expand...
Click to collapse
Thanks for advice, but I've got a couple problems with that.
My phone is rooted and has not been restored to factory because I can't turn it on.
Second, if I could turn it on isn't my warranty voided? And if it isn't voided, given that I could restore the phone to factory; I bought the phone through amazon,so would i contact amazon, verizon or Samsung?
Any thoughts on using a usbjig to start up my phone?

I don't know how but my phone turned on, Thanks for the help.

Related

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

Galxy s2 Vibrating and crashes at loading bar.

So i've looked around and no one that i've seen has the same exact problem as i do. Here's my post in another forums about my problem.
Here's my story about my Galaxy s2 for T-mobile. My phone randomly turned off 2 days and whenever i tried to turn it on, it would restart and basically never get pass the blue loading bar screen. Second, i found out about this boot loop sequence and i was able to do a factory wipe.
After i factory wiped the data etc off the phone, i was able to use it until it ran out of battery, but then after i found out it ran out of battery, it wouldn't let me turn it back on, it wouldn't get pass the loading screen, once again. On the other hand, i am able to go to recovery mode or download mode, but the phone shuts off before i can even try and click on the options i want.
Today, i found out that if i kept pressing power button consecutively on the phone, I'd be able to go to my home screen and basically act as if nothing ever happened, it'd function as a new phone! I then had the nerves of turning off my phone just to make sure it finally works now, but my hopes were crushed and now the pressing the power trick does not even work anymore. It would probably work one out of 10-15 times, and in the end it'd still restart. I am using a gingerbread galaxy s2. My friend tried using the usb jib on my phone, and it worked but whenever he tried to plug in the usb, the phone would just restart. I am extremely frustrated with this, and if you can help, please do so because it's important that i fix this phone. If you have any questions, please feel free to ask!
Hi there, thank you for the welcoming me to the forums. No, my phone is not rooted, it has always been gingerbread etc i never tried rooting because i never knew how:/ I believe this started when i was just browsing around facebook, so i'm not entirely sure what happened... Uhmm i tried going to download mode through the volume keys and power button when it's connected to usb to the i think it's odin3? and it'd be in the download mode but as soon as the computer says it's connected, the phone would just turn off again and bam, it's like nothing ever happened. My phone does charge when it's plugged in, but it doesn't show it's being charged but i remember my battery was dead last night and i charged it till today and now it's got power. ANd no i don't have a warranty:/ i really hope you can help me
Sounds like a faulty power button. Check out Mobiletech video for thier power button repair service.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Sent from my SGH-T989 using xda premium

[Q] Any way to disable the power button?

Hey guys,
So I've got an S3 running AOKP at the moment and I was wondering if there was any way to disable the power button. It's been malfunctioning, and causing my phone to reboot constantly. Sometimes even when off it continues to think I'm holding down the power button and cancels the boot process...
Any ideas of a workaround? I'm out of warranty and can't want to pay for repairs at the moment.
S3 power button boot loop (sudden death?)
poacherD said:
Hey guys,
So I've got an S3 running AOKP at the moment and I was wondering if there was any way to disable the power button. It's been malfunctioning, and causing my phone to reboot constantly. Sometimes even when off it continues to think I'm holding down the power button and cancels the boot process...
Any ideas of a workaround? I'm out of warranty and can't want to pay for repairs at the moment.
Click to expand...
Click to collapse
Hi,
I am having the exact same issue. Very strange as it decided to do this while checking my email (finger no where near the power button) and I have never had any issues prior to this.
I'm running CWM, CM10.2 and I CANNOT BOOT into recovery (CWM) or ODIN, best I got was the CM loader screen then it reboots.
Even if I disconnect the battery, wait 30 minutes (fully charged) and replace the battery, it attempts to boot itself again. and again and again...
The best videos I've seen involve smacking the phone on the power button side (not going to do that, at least hard) I think it may be a random power button failure. I will be disassembling the phone tonight and trying to open or close the power button contacts and wipe my phone before it goes back....
Yoiks!
mc045 said:
Hi,
I am having the exact same issue. Very strange as it decided to do this while checking my email (finger no where near the power button) and I have never had any issues prior to this.
I'm running CWM, CM10.2 and I CANNOT BOOT into recovery (CWM) or ODIN, best I got was the CM loader screen then it reboots.
Even if I disconnect the battery, wait 30 minutes (fully charged) and replace the battery, it attempts to boot itself again. and again and again...
The best videos I've seen involve smacking the phone on the power button side (not going to do that, at least hard) I think it may be a random power button failure. I will be disassembling the phone tonight and trying to open or close the power button contacts and wipe my phone before it goes back....
Yoiks!
Click to expand...
Click to collapse
It's very random for me too. Sometimes it'll work all day then it'll take like an hour and a half to turn back on.
Quick question, as I've heard this from a couple people. Do you use an otter box?
Regardless I'm 90% sure this is hardware related and has nothign to do with software, because all the cases I've heard of this have had different roms, one of which was stock unrooted.
Pretty frustrating. Not sure I'll buy a Samsung again to be honest.
poacherD said:
It's very random for me too. Sometimes it'll work all day then it'll take like an hour and a half to turn back on.
Quick question, as I've heard this from a couple people. Do you use an otter box?
Regardless I'm 90% sure this is hardware related and has nothign to do with software, because all the cases I've heard of this have had different roms, one of which was stock unrooted.
Pretty frustrating. Not sure I'll buy a Samsung again to be honest.
Click to expand...
Click to collapse
This started gradually happening to me too and I bought both my phone and Otterbox in July 2012 when it came out. I noticed with my family members' S3's that their Otterboxes were different in regards to the power button (it stuck out more) whereas mine hardly stuck out at all. I got a warranty replacement this past July (2013) and the exact issues you described began happening. It started out as random reboots and as of yesterday, I can't get my phone to boot because it thinks I'm holding the power button down (therefore not letting the boot process finish). I took my phone apart, expecting the power button to be an easy swap like it was in the GS2, but no, it's a part of the friggin motherboard. I also am looking for a way to disable the power button. I'd recommend that if you are able to get it to boot even once, that you make sure to backup all your stuff. Fortunately all my pics are backed up since I can't boot my phone anymore, but other files are currently inaccessible. I wonder if anyone knows if some sort of electrical tape or something could prevent the power button signal from transferring so that we would be able to boot our phones?
I had the same power button issue with my Captivate as well... and thought that issue had been looked into. After 14 months of use on my S3, I noticed this issue appeared.
Solution (well not quite): change key layout to disable power button. Re-map volume down as "power, wake". Yes, by doing this, I am losing volume down button. Also, when the phone is off, I still need to press the power button to power it up. My fix of changing the key layout file won't take charge until after the phone boots up.

[Q] Please help! Stuck in Bootloop, power button "stuck", no download mode!!

[Q] Please help! Stuck in Bootloop, power button "stuck", no download mode!!
I believe this has to do with the phone thinking the power button is constantly being pressed...
I'm looking for any advice. My s3 suddenly went into a boot loop this morning. It powers on for a few seconds and turns itself back off. I took my case off and noticed the power button is loose. Doing a little research, came across similar issues online caused by the main board going faulty and the phone thinking the power button is constantly being held down.
I know this because I can remove my battery, put it back in, and without even touching any buttons, the phone will attempt to power up.
I'm currently rooted and can't get into download mode for more than 3-5 seconds before it turns itself off. I was only once able to apply the perfect pressure by squeezing the side of the phone which allowed it to boot normally, but about 30 seconds later, the power menu appeared by itself and it turned off a few seconds later.
Has this happened to anyone else?? Anybody know how to go about fixing it??
My phone is still under warranty, but I can't flash back to stock.
Things I've tried:
Download mode
Recovery mode
Different battery
I haven't tried taking the phone apart yet. I want to get a replacement if possible. But just in case, has anybody repaired this themselves??
I'm really at a loss here. Any help is much appreciated!
Darkendes said:
I believe this has to do with the phone thinking the power button is constantly being pressed...
I'm looking for any advice. My s3 suddenly went into a boot loop this morning. It powers on for a few seconds and turns itself back off. I took my case off and noticed the power button is loose. Doing a little research, came across similar issues online caused by the main board going faulty and the phone thinking the power button is constantly being held down.
I know this because I can remove my battery, put it back in, and without even touching any buttons, the phone will attempt to power up.
I'm currently rooted and can't get into download mode for more than 3-5 seconds before it turns itself off. I was only once able to apply the perfect pressure by squeezing the side of the phone which allowed it to boot normally, but about 30 seconds later, the power menu appeared by itself and it turned off a few seconds later.
Has this happened to anyone else?? Anybody know how to go about fixing it??
My phone is still under warranty, but I can't flash back to stock.
Things I've tried:
Download mode
Recovery mode
Different battery
I haven't tried taking the phone apart yet. I want to get a replacement if possible. But just in case, has anybody repaired this themselves??
I'm really at a loss here. Any help is much appreciated!
Click to expand...
Click to collapse
Wow, crazy. I'm experiencing the same issue starting yesterday! I haven't tried swapping my battery yet, but the stuck power button makes so much more sense. I'm having all the same issues with not being able to stay in recovery mode or download mode for very long.
[EDIT]
My phone also seems to be reacting to static electricity. Say I let sit on my desk... It does nothing (not cycling reboots), if I pick it up it'll just start rebooting again. This leads me to believe that maybe it's not my power button but a battery or internal component issue.
MooreHeat said:
Wow, crazy. I'm experiencing the same issue starting yesterday! I haven't tried swapping my battery yet, but the stuck power button makes so much more sense. I'm having all the same issues with not being able to stay in recovery mode or download mode for very long.
[EDIT]
My phone also seems to be reacting to static electricity. Say I let sit on my desk... It does nothing (not cycling reboots), if I pick it up it'll just start rebooting again. This leads me to believe that maybe it's not my power button but a battery or internal component issue.
Click to expand...
Click to collapse
Weird. I haven't noticed mine reacting to touch, but I did watch it try to start itself multiple times while sitting all by itself on my desk.
I'm going to take it to my carrier's in-store warranty center. They said with it rooted it can't be replaced, but they can try to repair the button if it's stuck.
We'll see what happens.
Has anybody had to replace their power button themselves before?
Darkendes said:
Weird. I haven't noticed mine reacting to touch, but I did watch it try to start itself multiple times while sitting all by itself on my desk.
I'm going to take it to my carrier's in-store warranty center. They said with it rooted it can't be replaced, but they can try to repair the button if it's stuck.
We'll see what happens.
Has anybody had to replace their power button themselves before?
Click to expand...
Click to collapse
Well I just disassembled my S3. The power button mechanism seems to be just fine. It clicks down with pressure and releases just as I would expect it to. I'm thinking my issue is something electrical or battery.
Were you doing anything when your phone went in to boot loop? I was just texting someone and then.. poof!
What ROM are you using?

[Q] Phone won't turn on after trying to update via KIES - rooted

My Samsung Galaxy S4 (rooted with CM, but stock otherwise) will not power on at all after trying to update it via Kies. It got stuck on the screen where it shows the green Android guy, with "Do not turn off the target" for well over an hour. I had to pull the battery to get it to get off of that screen. When I went to power it back up, it does nothing. Tried every combination of buttons that I could think of, but the phone will not respond.
Is it bricked? Please help!
beee240 said:
My Samsung Galaxy S4 (rooted with CM, but stock otherwise) will not power on at all after trying to update it via Kies. It got stuck on the screen where it shows the green Android guy, with "Do not turn off the target" for well over an hour. I had to pull the battery to get it to get off of that screen. When I went to power it back up, it does nothing. Tried every combination of buttons that I could think of, but the phone will not respond.
Is it bricked? Please help!
Click to expand...
Click to collapse
Sounds pretty bricked. If you can't power it on at all, even to recovery or download mode, I'm not sure what you could possibly do to fix it. Nothing that interface with the phone to fix it if the phone can't power on.
Skipjacks said:
Sounds pretty bricked. If you can't power it on at all, even to recovery or download mode, I'm not sure what you could possibly do to fix it. Nothing that interface with the phone to fix it if the phone can't power on.
Click to expand...
Click to collapse
Crap. I guess I'm going to have to head over to T-Mobile to see if I can get a warranty replacement. I think it's good until May.
Edit: T-Mobile Rep thinks that it's a hardware failure of some sort, so they're sending me a "new" S4 overnight. At least I'll be able to get 4.4 without too much trouble now.

Categories

Resources