please tell me how I would know I see the network frequency gsm 3g and I am connected in nexus 4 lg e960? I thank the attention of all of you!
secret code service menu not funtional 3845*#960# and 1809... , 2945... , my msl, and other
Have you tried *#*#4636#*#*
Hi!
Could somebody tell me what the other possible values for #NCCONS# ???
I'm assuming that Ev or EVDOrA (if I use NCCON) is 3G. But since I have no 4G WiMax or LTE signal I don't know what the value would be. Also if I'm a GSM network it's not going to be Ev. I'm on a CDMA network. I just want to cover my bases that if I do release a widget that I get the proper values!
Thanks for your help!
Is there any way to view the current frequency band in use on an LG G3?
On many Samsung phones, *#0011# will show a screen of current radio information that will have the band in use.
I tried the hidden code of 3845#*855# but I'm all the different menus I can't seem to find one that will show me either the current frequency in use right now or the RFCN code I can use to calculate it.
Does anyone know where this might be please?
Hi
Currently I'm not being able to get the 4G network and in mu country they're using the 1800 frequency (LTE 1800).
Is there a way to change it in the settings so as I can get hold of the 4G?
Thanks.
lenovop780 said:
Hi
Currently I'm not being able to get the 4G network and in mu country they're using the 1800 frequency (LTE 1800).
Is there a way to change it in the settings so as I can get hold of the 4G?
Thanks.
Click to expand...
Click to collapse
You should get 4g on the 1800 frequency. You can change between 3g and 4g in mobile data settings. However even if your network has 4g it will display 3g if you are not in a strong 4g signal area. It is the same here in the UK, 4g is fine where I live but I go over a bridge 5 minutes walk away and I can only get 3g! On some networks you need a new sim card for 4g to work as I did. Also do you have the correct APN settings for your network?
Yes I have the correct APN; otherwise if it's wrong I won't even get any data connection. Yes, I might be in a region where it's weak or unavailable but when I'm in a region fully covered by 4G, just outside the HQ of Orange, I still don't get it.
Try using mtk engineering mode app from play store(by go! or themonster) to force LTE - it's under telephony/network selecting.
yes then what do you do?
Please leave "Thanks" if this thread helped you.
_____________METHOD : 1________________
1. Open dialer and type : *#*#4636#*#*
2. Choose SIM1 or SIM2 to enter reception menu.
3. From dropdown menu ( LTE/UMTS auto (prl) as default ) change it to : GSM only
4. Wait until your cellular will reset and turn back on.
5. Less dBm amount = better signal strenght.
6. Test best signal for your network and share it in comments.
________________________________________
_____________METHOD : 2________________
1. Open SIM tray
2. Change your SIM car slot to Slot 2
3. Check if your signal strenght increased and share it in comments.
________________________________________
I'm waiting for my RN8Pro. Is there signal strength issue by default?
You can change this in network settings menu the normal people way and also allowing only GSM will relegate you to 2g network that has indeed better signal but will kill your internet speeds.
AlphaBravo said:
I'm waiting for my RN8Pro. Is there signal strength issue by default?
Click to expand...
Click to collapse
A little bit I think. At my house, with Redmi note 7 I have 4G+ ,with Redmi note 8 pro I don't have 4G+ so often and on places that I have it with Redmi note 7
How to increase the sharpness of incoming call voice? Most of the time, voice is muffled.
The incoming voice leaks from the back of the front speaker too
how to increase the volume of the headphone and speaker?
nakedowl said:
Please leave "Thanks" if this thread helped you.
_____________METHOD : 1________________
1. Open dialer and type : *#*#4636#*#*
2. Choose SIM1 or SIM2 to enter reception menu.
3. From dropdown menu ( LTE/UMTS auto (prl) as default ) change it to : GSM only
4. Wait until your cellular will reset and turn back on.
5. Less dBm amount = better signal strenght.
6. Test best signal for your network and share it in comments.
________________________________________
_____________METHOD : 2________________
1. Open SIM tray
2. Change your SIM car slot to Slot 2
3. Check if your signal strenght increased and share it in comments.
________________________________________
Click to expand...
Click to collapse
I try this.. when I change LTE/UMTS auto to GSM only I loose 4G and have only H+ that is slower than 4G.. and the signal is the same.. I try it on one spot for half an hour
2G has almost everywhere coverage and it's too old technology to use.
When UE is registered to 2G network it can't handle voice+data transmission simultanously (most networks does not support DTM technology).
Also 2G is not designed to used AMR-WB voice codec, only simple AMR which sounds like **** to be honest.
So this tutorial is pointless, sacrifice better data speed for rubbish voice and ultra slow data speed
needmoney said:
2G has almost everywhere coverage and it's too old technology to use.
When UE is registered to 2G network it can't handle voice+data transmission simultanously (most networks does not support DTM technology).
Hi,
Also 2G is not designed to used AMR-WB voice codec, only simple AMR which sounds like **** to be honest.
So this tutorial is pointless, sacrifice better data speed for rubbish voice and ultra slow data speed
Click to expand...
Click to collapse
Redmi NOte 8 Pro has big problems with LTE 4G + tape management. The phone does not keep the 4G + it switches and stays in 4G all the time. It's a modem management problem that does not support the double-banding needed for 4G +.
Bests Regards
Xiaomi Redmi Note 8 Pro model M1906G7I (Global) doesn't connect to 4G LTE
Hi there! My problem is even worse than this you are sharing with us. I bought a Xiaomi Redmi Note 8 Pro model M1906G7I (Global). However, there is a lie about it, the specifications indicate that about networks it works for the following 4G LTE bands: B1/B2/B3/B4/B5/B7/B8/B20/B28, but it is not true as it only works for B1/B3/B5/B8/B40/B41 (I found it out by entering to engineer mode *#*#3646633#*#*). Therefore, in my case I can only connect to 3G because my service carrier uses B4 (1700 mhz, 2100 mhz) for 4G LTE. Besides that, everything is fine with the phone. What I am trying to find out is whether it is possible to activate or unlock the B4 band so that it can connect to 4G LTE. If anybody knows about a solution to this issue, I would appreciate the assistance to this matter.
Hi,
You don't have the global version M1906G7G
Global : B1/B2/B3/B4/B5/B7/B8/B20/B28/B38/B40
China : B1/B3/B5/B8/B34/B38/B39/B40/B41
India : B1/B3/B5/B8/B40/B41
You must get a refund if you bought the global version, and change to the M1906G7G to be able to use B4 .
I just tried this on my note 8t. Switched to GSM only and immediately even before restarting the phone, went from 1 bar to full bars. Speed tests show much more bandwidth available (now at 11.8mbps/3.1mbps). Sweet. First post I found after a search and first solution just flat out worked. Still think I should be getting higher speeds (I don't think I have ever really cared about the mobile speed because I am almost always on wifi, and do not recall ever doing a speed test, but at least it's better than it was now.