[Q] Clockwork or based recovery for Arc S - Xperia Arc Q&A, Help & Troubleshooting

I have a LT18i, Android 4.0.4 with build .431 and it is rooted and has a locked bootloader. I have looked everywhere for a way to install clockworkmod recovery on it without flashing a custom rom or kernel, but it doesn't seem possible. Next, I tried a clockwork based recovery but only found DoomLord's recovery. But it had LT26i or Xperia S listed as the device so I'm not sure if it would work on mine. Will it? If not, is there any other clockwork based recovery I could install?

try the CWM Auto Installer on Google Play

Download pvyParts' Xperia CWM Auto-Installer from the market. That should give you access to CWM.
Do keep in mind that it's been reported that the phone doesn't charge if you switch it off; it tends to bootloop. It works fine if the phone is on though. Pvy will be updating the app shortly.
This works well if you want to take Nandroid backups and (or) flash update.zips.
And if you do plan on flashing custom kernels, you would need to unlock your bootloader. For custom ROMs, you're limited to Stock based ROMs till you do decide to unlock your bootloader.
Cheers!

xtacy! said:
Download pvyParts' Xperia CWM Auto-Installer from the market. That should give you access to CWM.
Do keep in mind that it's been reported that the phone doesn't charge if you switch it off; it tends to bootloop. It works fine if the phone is on though. Pvy will be updating the app shortly.
This works well if you want to take Nandroid backups and (or) flash update.zips.
And if you do plan on flashing custom kernels, you would need to unlock your bootloader. For custom ROMs, you're limited to Stock based ROMs till you do decide to unlock your bootloader.
Cheers!
Click to expand...
Click to collapse
Thank you for your reply. I found a thread about Pvy's installer but there it was stated.that it would only work on Gingerbread 2.3. It wasn't stated so on Google play though. So are you sure it would work on Ics 4.0.4?
Sent from my LT18i using Tapatalk 2

See this thread. It states donot install if not on GB.
http://forum.xda-developers.com/showthread.php?t=1345741
Sent from my LT18i using Tapatalk 2

Trust me, it works. I'm using it on my arc on ICS 4.0.4 .
And the only problem of using this on ICS was mentioned in my earlier post. I'm quoting it below.
xtacy! said:
Do keep in mind that it's been reported that the phone doesn't charge if you switch it off; it tends to bootloop. It works fine if the phone is on though. Pvy will be updating the app shortly.
Click to expand...
Click to collapse

xtacy! said:
Trust me, it works. I'm using it on my arc on ICS 4.0.4 .
And the only problem of using this on ICS was mentioned in my earlier post. I'm quoting it below.
Click to expand...
Click to collapse
Ok, I'll give it a try. Thanks a lot for your help
Sent from my LT18i using Tapatalk 2

Anytime.

xtacy! said:
Anytime.
Click to expand...
Click to collapse
Sora3004 said:
Ok, I'll give it a try. Thanks a lot for your help
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Just to ease your mind xtacy! is right it works
Pvy.

pvyParts said:
Just to ease your mind xtacy! is right it works
Pvy.
Click to expand...
Click to collapse
Thanks for making the application pvy. I installed it and it worked perfectly except for the charging issue. But I wonder what would happen if the battery got completely drained and the phone switched off? Just curious to know since it wont charge when it's off.
Sent from my LT18i using Tapatalk 2

Just plug in the charger and power it on. There shouldn't be an issue.

You can fix thr bug by downloading a charger file which fix offline charging...

simplyjustkids said:
You can fix thr bug by downloading a charger file which fix offline charging...
Click to expand...
Click to collapse
What file? Can you give a description or link?
Sent from my LT18i using Tapatalk 2

It's in the android development section, Krazy Charger Fix.
Links below:
http://forum.xda-developers.com/showthread.php?t=1715898
(The fix is nothing to do with me, I'm just the middle man )

Jon565G said:
It's in the android development section, Krazy Charger Fix.
Links below:
http://forum.xda-developers.com/showthread.php?t=1715898
(The fix is nothing to do with me, I'm just the middle man )
Click to expand...
Click to collapse
The fix worked. Thank you very much!
Sent from my LT18i using Tapatalk 2

Related

[Q] How to boot to recovery?

Hey peeps - another annoying n00b question (sorry)
I have the Doom v3 kernel and stock 2.3.3
Just want to know how I can boot into recovery so I can install a ROM zip?
I have tried every combination of buttons on startup including Power then tapping and holding Back and I cant get into recovery mode.
Please help i really want to try the GingerStation rom
Turn device off. When off press the power button once, then start tapping any hardware button untill device boots into recovery. You can also try doomlords xCharge app from the market.
Sorry i havent been very active in the forums recently. I will be updating rom soon with some cool features and a new name
Sent from my R800i using Tapatalk
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
You have to turn the phone on, when you see the first image of the android on the screen keep tapping the back button, you will get in trust me I had the same problem
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
AFAIK you have to boot into recovery the standard way. Like the person above described. Once you do that CWM creates a directory in /cache called "recovery" then xCharge works fine
OmG it worked.. thanks alot guys!!
Sent from my GT-I9100 using xda premium
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
brockyneo said:
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
Click to expand...
Click to collapse
Did you try everything from this thread?
eg. Pushing back/wolume button (or maybe other) when the led lights.
If yes. Try get to it using command or reflash boot.img
Sent using r800i with DoomKernel v10 (1.21ghz)
I have a stock Play, but I'm not good to reboot into recovery....
akira.pwr said:
I have a stock Play, but I'm not good to reboot into recovery....
Click to expand...
Click to collapse
Have you installed CWM?
No, I don't know how to do it...
akira.pwr said:
No, I don't know how to do it...
Click to expand...
Click to collapse
Are you rooted?
If not, do you know how to do that?
No, it's completely stock, I've read I have to flash a file in recovery, I've got it, but I don't know how to reboot in recovery with button combination.
To get cwm, root using doomlords easy toolkit, search development
Then install this app and click install: https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler
After you have installed that, boot on your phone, and when you see the sony ericsson screen, repeatedly tap volume down until you get into cwm
WOW! It's very easy this way, thanks a lot
Another quick question, now bootloader is unlocked?
Can I flash any custom roms like any other device? (flash in recovery mode)
Thanks again.
That way i showed is to install CWM with a LOCKED bootloader.
This will allow you to flash STOCK based roms, no others
This is not unlocking bootloader, just getting CWM
If you want to unlock your bootloader, you have to go to the sony website or pay to unlock it
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
akira.pwr said:
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
Click to expand...
Click to collapse
Yeah!
Before anything, make a nandroid backup!
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
akira.pwr said:
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
Click to expand...
Click to collapse
Happy to help

Got myself a bit confused

Right have lost track of what update is what I have 2.3.3 UK generic, rooted and bootloader unlocked with doomlords kernel think it was the first one. Have trawled the forums and not sure what the right way to update to 2.3.4 is, like I say I have confused myself
Can some one point me in the right direction please
Sent from my LT15i using Tapatalk
It's quite simple if you have an unlocked BL, and the ability to read - http://forum.xda-developers.com/forumdisplay.php?f=963
right so i have been away and done my reading lol
am i right in thinking i have to use flashtool to install the ftf file first then use fastboot to to install the img file from this post
http://forum.xda-developers.com/showthread.php?t=1269937
just checking as dont wont to bork my phone as need it for work in the morning.
or have i missed something
sorry if this seems a bit simple but i always feel it good to make sure first
rustynuts34 said:
right so i have been away and done my reading lol
am i right in thinking i have to use flashtool to install the ftf file first then use fastboot to to install the img file from this post
http://forum.xda-developers.com/showthread.php?t=1269937
)
Click to expand...
Click to collapse
All you need is the img, which is already rooted, the ftf is for those with a locked boot loader.
ok cool thanks thought i may need to do both as people were complaining of losing wifif, ok here goes then cheers for the help
rustynuts34 said:
ok cool thanks thought i may need to do both as people were complaining of losing wifif, ok here goes then cheers for the help
Click to expand...
Click to collapse
Might be an idea if you do have issues to flash the ftf and wipe user data, but I just flashed the image and haven't had any issues.
Had to do both in the end as WiFi didn't work, all good now though
Sent from my LT15i using Tapatalk
Nice one.
Sent from my LT15i using XDA App
Hi
.Img doesnt replace kernel thats why there is wifi issues
But if u flash .img then doomkernel after it,it will work has doomkernel supports 2.3.4, altho not fully yet.
Hope that helps
Sent from my LT15i using XDA Premium App
pushtostop said:
Hi
.Img doesnt replace kernel thats why there is wifi issues
But if u flash .img then doomkernel after it,it will work has doomkernel supports 2.3.4, altho not fully yet.
Hope that helps
It would have last night lol but never mind its sorted now thanks, but at least i know i can use doomkernel now
Click to expand...
Click to collapse
Ya doomkernel v10test works minus vibration / usb but multimount sd off market fixes usb and vibs not important and will be fixed in v11 I assume when sources are released
Sent from my LT15i using XDA Premium App

[Q]What to do next?

Hey all sorry for the stupid question but I have a r800at and its unlocked, rooted, and I've got dooms kernel loaded no problem (this phone OCs to 1.9 stable it's nuts lol). When I try to flash zeros ROM but every time I flash it in recovery when it reboots I have no launcher to cell signal and the buttons don't work. I've tried 4 times with no luck. I get the idea that I can boot directly from dooms kernel into recovery but I'm not sure how, I still plug it in to the computer. Anyone have done insight in what the deal is? Thanks for any info anyone has.
Sent from my R800at using Tapatalk
79 views and no one has any ideas?
Sent from my R800at using Tapatalk
It might be that zerojay's rom is not compatable with your device. If i remember correctly he has a R800i and there might be some slight differences between *i* and *at* models in the framework that makes it not work on *at* play's?
Regards Dousan...
You might want to ask in zerojay's thread if you haven't already
Dousan said:
It might be that zerojay's rom is not compatable with your device. If i remember correctly he has a R800i and there might be some slight differences between *i* and *at* models in the framework that makes it not work on *at* play's?
Regards Dousan...
You might want to ask in zerojay's thread if you haven't already
Click to expand...
Click to collapse
Alright, thank you very much for the reply
Sent from my R800at using Tapatalk
I flashed the na generic rom on my 800at. Now it reports back as a 800a. Just fyi
Sent from my R800a using xda premium
HighJeep said:
I flashed the na generic rom on my 800at. Now it reports back as a 800a. Just fyi
Sent from my R800a using xda premium
Click to expand...
Click to collapse
Ok cool I was just looking at that actually. When you did flash tool did you get to pick the play as the device because all I get is x10 or the mini. Also another stupid question, how do you get into flash mode on the play? Is it still back button and plug it in? Thanks!
Sent from my R800at using Tapatalk
Clienterror said:
Ok cool I was just looking at that actually. When you did flash tool did you get to pick the play as the device because all I get is x10 or the mini. Also another stupid question, how do you get into flash mode on the play? Is it still back button and plug it in? Thanks!
Sent from my R800at using Tapatalk
Click to expand...
Click to collapse
Yeah turn off phone and then back button and usb.
If you're using flashtool 0.2.9.1 (beta) there should only be one flashtool.exe to choose (x10FlashTool.exe). If you plug it in while on you'll get multiple choises of phones to pick from while in flashtool window.
If you need more info on how to use flashtool here's a link to a small tut i wrote:
http://forum.xda-developers.com/showpost.php?p=17804320&postcount=2
Regards Dousan...

[Q] How do i install CWM recovery on arc s running ICS

Hi, i recently upgraded my arc LT15i to an arc s LT18i with ICS, all is working well with no problems. I want to install cwm recovery onto my phone as i want to flash more mods. After looking around i see you need cwm recovery in case it all goes wrong. I have installed rom manger from the market place but when i try to flash cwm recovery it asks if i have installed a cwm based recovery manually ( i haven't) i select no and it tells me that until cwm recovery is available, rom manager will not work with LT18i. Can anyone help or advise. I am fairly new to this flashing business so simple terms please.
Thanks
Phil
Using this link download SE Tweak Installer and install CWM
http://forum.xda-developers.com/showthread.php?t=1356253
Sent from my LT15i using XDA
I have just reflashed ics firmwire to start with a fresh phnoe, i did have the status bar mod with wifi, blutooth, reboot etc but now can't seem to find the software and how to install it, can anyone help.
I'm going mad here, i can't get the se tweak onto my phone, ive been checking other threads for mods and they say to flash in cwm recovery mode but i can't install that either. I'm going round in circles. Can anyone help.
Philhnt said:
I'm going mad here, i can't get the se tweak onto my phone, ive been checking other threads for mods and they say to flash in cwm recovery mode but i can't install that either. I'm going round in circles. Can anyone help.
Click to expand...
Click to collapse
Well what's the prob with SE Tweak Installer?
Sent from my LT15i using XDA
me, thats the problem. All sorted now.
Thanks
Could you say wat went wrong and how you did it?
Sent from my LT15i using XDA
gire.prasad said:
Using this link download SE Tweak Installer and install CWM
http://forum.xda-developers.com/showthread.php?t=1356253
Sent from my LT15i using XDA
Click to expand...
Click to collapse
Sorry, but that says it's all about Gingerbread, not ICS. Or does it work also on ICS? I'm upgrading this afternoon, probably, so I would like to know how can I get the CWM with my locked bootloader....
Thks
I installed xperia cwm auto installer from market place. Works a treat on lt18i. I've got back ups now and its easy to use. Highly recommended app!!!
Philhnt said:
I installed xperia cwm auto installer from market place. Works a treat on lt18i. I've got back ups now and its easy to use. Highly recommended app!!!
Click to expand...
Click to collapse
but it says its only for stock 2.3 firmware
xperia cwm auto installer works on 4.0.4
make this
[HOW-TO] CWM on ICS
To have CWM on phone,
For locked bootloader, use Xperia Auto Installer. Can be download at market.
For unlocked bootloader, flash custom kernel with CWM like Stock ICS kernel with CWM, ArcKnight and Doomkernel.
You can search custom kernel here
http://forum.xda-developers.com/forumdisplay.php?f=965
why so difficult? use the cwm installer kit from doomlord works also on ICS 4.0.4
Pandemic said:
why so difficult? use the cwm installer kit from doomlord works also on ICS 4.0.4
Click to expand...
Click to collapse
Awesome, perfect, legend, exactly what I'm looking for.. Would you be so kind as to drop a link if you know where it is?
Sent from my LT18i using XDA
mynameisnafe said:
Awesome, perfect, legend, exactly what I'm looking for.. Would you be so kind as to drop a link if you know where it is?
Sent from my LT18i using XDA
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?p=20649281 this is from the neo topic but it also works for your arc s, no worries about that, go to the link and scroll a little down till you see cwm recovery there stands exactly what you must do
Cwm I'd available in the market as. A free app easiest way to install onto phone
Sent from my LT15i using xda premium
Pandemic said:
Here you go:
http://forum.xda-developers.com/showthread.php?p=20649281 this is from the neo topic but it also works for your arc s, no worries about that, go to the link and scroll a little down till you see cwm recovery there stands exactly what you must do
Click to expand...
Click to collapse
Beautiful! CWM Installed in seconds nooneAtalls script I like very much!
Thanks dude!
mynameisnafe said:
Beautiful! CWM Installed in seconds nooneAtalls script I like very much!
Thanks dude!
Click to expand...
Click to collapse
you`re welcome mate, no problem at all
Enjoy
piggybomb said:
but it says its only for stock 2.3 firmware
Click to expand...
Click to collapse
It was designed for 2,3,4
But it works fine on ics. bare in mind that my app installs cwm into the system recovery. And if you have an unlocked.bootloader your better off getting a kernel with cwm. Or getting the stock kernel with cwm put in to the ramdisk
Oh one note the app will break offline charging. I have a fix.in my thread for it tho and as soon as my pc will compile.apps again I'll release a new version on the market.
Pvy
Sent from my TEAM Powered Arc S

[Q] Is there a ICS Kernel for MK16i with CWM?

Title says it all, I just want a Kernel for ICS with CWM.
Kernels are booted with fastboot. CWM just flashes roms/mods etc.
He wants to install CWM.. As far as I know, only ICS option is Riyal's test kernel which isn't really "done" yet but it has CWM and lets you overclock too. Also tends to reboot phone occasionally, mostly during deep sleep.
Barleyman said:
He wants to install CWM.. As far as I know, only ICS option is Riyal's test kernel which isn't really "done" yet but it has CWM and lets you overclock too. Also tends to reboot phone occasionally, mostly during deep sleep.
Click to expand...
Click to collapse
Exactly, I want to have CWM on ICS.
Yeah I've heard Riyal is working on Ultima ICS, but I really want to try it but with some tweaks to improve its performance.
I think I'll have to wait him to finish a stable version of Ultima ICS.
Thanks anyway.
Why don't you try pvyParts' Xperia CWM Auto-Installer from the market?
You then have Stock ICS Kernel with CWM installed.
xtacy! said:
Why don't you try pvyParts' Xperia CWM Auto-Installer from the market?
You then have Stock ICS Kernel with CWM installed.
Click to expand...
Click to collapse
It says it only works with GB. So dunno if it has been tested with ICS.
RamEsRock said:
It says it only works with GB. So dunno if it has been tested with ICS.
Click to expand...
Click to collapse
It works, but may break offline charging (have a patch but no pc to update the app currently)
Pvy.
It does. I'm using it on ICS.
Cheers!
pvyParts said:
It works, but may break offline charging (have a patch but no pc to update the app currently)
Pvy.
Click to expand...
Click to collapse
Whoa Pvy! What do you mean it breaks offline charging? And what should I be worried about?
xtacy! said:
It does. I'm using it on ICS.
Cheers!
Whoa Pvy! What do you mean it breaks offline charging? And what should I be worried about?
Click to expand...
Click to collapse
lol if you plug the phone in when it is off it will bootloop bit annoying but not damaging at all it is an easy fix
http://forum.xda-developers.com/showpost.php?p=25155323&postcount=263
i got my pc sorta running yesterday so should be able to update as soon as i get all my apps+libraries back into eclipse...
Pvy.
Ahh, I never turned off my phone and charged. Perhaps that's why I never noticed the 'error'? LOL! Anyway, hoping for an update soon. Cheers!
You guys kind of summoned pvy, lol.
Well, now that I have your attention and know that it works.
I imagine it installs the CWM in the Rom and not the Kernel and that if I do a full wipe it will go away, correct?
Also, it works with a button combo or such from the start up or just through a menú when already booted?
Yes and yes. It doesn't touch the kernel.
You can invoke it through the app i.e. boot into recovery or the usual method by pressing back repeatedly when you see the LED light up at the Sony boot screen.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
xtacy! said:
Why don't you try pvyParts' Xperia CWM Auto-Installer from the market?
You then have Stock ICS Kernel with CWM installed.
Click to expand...
Click to collapse
But Xperia Pro is not supported. I tried it and it does not work.
Sent from my MK16i using Tapatalk
RamEsRock said:
You guys kind of summoned pvy, lol.
Well, now that I have your attention and know that it works.
I imagine it installs the CWM in the Rom and not the Kernel and that if I do a full wipe it will go away, correct?
Also, it works with a button combo or such from the start up or just through a menú when already booted?
Click to expand...
Click to collapse
You summoned the genie from the lamp! you may have 3 Questions!
xtacy! said:
Yes and yes. It doesn't touch the kernel.
You can invoke it through the app i.e. boot into recovery or the usual method by pressing back repeatedly when you see the LED light up at the Sony boot screen.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
Click to expand...
Click to collapse
And here you have 3 answers!
Ztrindberg said:
But Xperia Pro is not supported. I tried it and it does not work.
Sent from my MK16i using Tapatalk
Click to expand...
Click to collapse
Sorry didn't know the pro's model I'll add it.
Pvy
Sent from my LT18i using xda premium
LOL! @Pvy
At least something good came out of this post... lol.
Is there any actual way to install CWM in MK16i ICS 4.0.4? The app in play store "Xperia CWM Auto-Installer" explicitly says that it only works on 2.3 (GB), and sure enough, even with root permision, it says it is incompatible with MK16i ICS 4.0.4
davezone said:
Is there any actual way to install CWM in MK16i ICS 4.0.4? The app in play store "Xperia CWM Auto-Installer" explicitly says that it only works on 2.3 (GB), and sure enough, even with root permision, it says it is incompatible with MK16i ICS 4.0.4
Click to expand...
Click to collapse
Uh, how about you go up 3-4 posts?
PvyParts said that he didn't know the model number and that he would add it. Once he does, it should work.
What xtacy said. Even the same developer pvy told us he didn't know the model.
Besides I wanted to have it IN the Kernel, which is already being developed by Riyal. This is an old question.
pvyParts said:
You summoned the genie from the lamp! you may have 3 Questions!
And here you have 3 answers!
Sorry didn't know the pro's model I'll add it.
Pvy
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
There have been months gone.
Since being updated
I think ur CWM auto installer Should be updated or else will think its end of CWM installer with V4..?
Arcman™ [email protected] . LT15i using Tapatalk 2

Categories

Resources