Develop Bugs

AOKP Alpha 3|Now Milestone 4! [03/21/2012] Edited for USCC

First off, I take no credit for this, Credit goes to TEAM AOKP, Kbizzle , T.C.P., Sbrissen, Marcusant, and anyone else involved in the AOKP port to Epic 4G Touch. Vandam500 for quick easy guide for CM9. Bubby323 for CM7. (Anyone I missed, I am sorry, let me know I will put you up asap) Also thanks to SFHub for helping get the USCC variant rooted.
I, NOR ANYONE INVOLVED WITH THIS ROM ARE RESPONSIBLE FOR YOUR PHONE! FLASH AT YOUR OWN RISK, YOU MAY BRICK AND IT IS NOT MY FAULT. THROW IT IN THE TOLIET AND INSURANCE THAT THING. Read it all, be sure you know what you are doing before you get an expensive paper weight.
I did nothing to this rom but a few edits for USCC. Made changes for APN’s, build.prop. and eri.xml to show USCC.
Download USCC AOKP rom http://dl.dropbox.com/u/44439007/AO...m.xda-developers.com/showthread.php?t=1514665.
Download CM7 from http://forums.acsyndicate.net/showthread.php?3372-ROM-UNOFFICIAL-Cyanogenmod-7-2-Alpha-6-(1-15-2012.
Put all this on your internal sd card. For simplicity sake I make a folder called roms and then /cm7 and /aokp inside and put the appropriate files there to avoid confusion.
Recommended install
From stock flash(odin) rooted FB14 kernel from here http://dl.dropbox.com/u/44439007/FB14_CWM_Sickin.tar
wipe data/factory reset, wipe cache, and wipe dalvik
install cm7 (no need to install gapps) REBOOT
after boot reboot into cwm
flash AOKP_build28_uscc.zip and then gapps for ics
wipe data/factory reset
reboot
enjoy
*NOTE* You will not have CWM after flashing AOKP. To get back I ODIN EB30 kernel, boot into CWM, and restored back up made earlier.
Also there are still options for 4G, I do not know much about editing them and will worry about them later, for now just ignore them.
Be sure to thank and show your appreciation to everyone involved.

Sickin,
If you can, make sure to post how to put CWM on the phone, I have all the files downloaded, just waiting on getting CWM.

Flash the EB30 clockwork kernel from here http://goo-inside.me/stock/epic4gtouch/kernel/acs-eb30-clockwork-epic-touch-4g-sep-20-4-00-pm.tar
that will give you cwm and you can go from there. Didn't realize the kernel flashed on SFHub's updated version didn't have cwm. Use odin to flash the kernel and go from there, that should take care of it.
EDIT: Sorry should have specified that you need to go back to either the EB30 or the EK02 kernel from SFHub's method, do not flash the stock kernel back or you lose CWM.

nice job but u don't really need cm7 or gapps just flash acs el29 kernel and use calks format all then install from and gapps, avoid all the extra steps.
Sent from my SPH-D710 using xda premium

whats USCC?

Cool. Good job.
Sent from my SPH-D710 using Tapatalk

Us cellular
USCC SGS2

does this have the external memory reading i had i real issue with that in alpha 3

T.C.P said:
nice job but u don't really need cm7 or gapps just flash acs el29 kernel and use calks format all then install from and gapps, avoid all the extra steps.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Err there is no EL29 on the USCC edition. LOLOL!

just curious, why would anyone want this?
is it just the uscc stuff, or are there other things that make this different or special?
thanks!

People with the USCELLULAR sgs2...
USCC SGS2

dbaybay said:
Err there is no EL29 on the USCC edition. LOLOL!
Click to expand...
Click to collapse
There is nothing for the USCC edition other then the stock kernel so far, but we have found a few kernels that work with out problem so far. The FC05 kernel in AOKP seems to work fine.
wase4711 said:
just curious, why would anyone want this?
is it just the uscc stuff, or are there other things that make this different or special?
thanks!
Click to expand...
Click to collapse
It is just edited for USCC. APN's what not so the phone receives mms and shows USCC instead of sprint
beatit327 said:
does this have the external memory reading i had i real issue with that in alpha 3
Click to expand...
Click to collapse
No, nothing is changed except a few things for the us cellular version of the phone, everything about the rom is basically the same.

so, why would you put this in a Sprint e4gt forum?

There's no uscellular fourm yet... And it's basically same thing a epic 4g touch
USCC SGS2

wase4711 said:
so, why would you put this in a Sprint e4gt forum?
Click to expand...
Click to collapse
Because there is no forum for our phone, and e4gt is basically the same. minus the 4g, but partitions are the same and what not. Id happily goto my own forum if I had one lol

ok thanks, I didn't know there weren't any us cellular forums

dbaybay said:
Err there is no EL29 on the USCC edition. LOLOL!
Click to expand...
Click to collapse
Derp lol
Sent from my SPH-D710 using xda premium

Thanks for doing this Sickin, just a quick note that SD Card is not recognized. From what I researched, the AOKP for the E4GT is the same.

U tried going to storage and mounting it?
USCC SGS2

There's no option for it on the AOKP ROM unless me and another person did something wrong but I followed the directions to a T, Even wrote them down and checked off each task

WiFi Tether on latest Cyanogen ROM

Hi
I just installed today the latest cyanogen mod nightly
My wifi tether is not working. I creates a hotspot, I can connect to it, but data is not transferred
May I get some help on getting wifi to work with this rom?
thank you

You need a different kernel. One that is for 10.1 that has WiFi tether enabled
Sent from my SGH-T999 using Tapatalk 2

clninja said:
You need a different kernel. One that is for 10.1 that has WiFi tether enabled
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
would you also recommend one kernel that works with that rom?
I tried one learnkernel but was crashing my rom
so again please someone advice for one good kernel

Use ktoonz kernel
Sent from my SGH-T999 using Tapatalk 2

clninja said:
Use ktoonz kernel
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Sorry, I know this is somewhat of an old post. My question, to install this kernel do i need to do anything in cwm such as wipe caches, factory reset or any of that?
I'm running 10.1 by the way.

nickcross88 said:
Sorry, I know this is somewhat of an old post. My question, to install this kernel do i need to do anything in cwm such as wipe caches, factory reset or any of that?
I'm running 10.1 by the way.
Click to expand...
Click to collapse
Head on over to Ktoonsez' thread and read the entire op. He clearly explains how to properly install his kernel.
Sent from my Nexus 4 using xda premium

I believe i found the right...
[KERNEL][TMO][AOSP/Touchwiz][JELLYBEAN][4/19/2013] KT747 - LJ7 - KTweaker
should i download on of the linux versions? Just to clarify i am running cm10.1 4/17. I'm not sure if i have linux. If I do, I certainly don't know which version. I could have possibly been looking at one of the wrong threads. Please let me know how i should proceed. Also, cm is aosp, right?

nickcross88 said:
I believe i found the right...
[KERNEL][TMO][AOSP/Touchwiz][JELLYBEAN][4/19/2013] KT747 - LJ7 - KTweaker
should i download on of the linux versions? Just to clarify i am running cm10.1 4/17. I'm not sure if i have linux. If I do, I certainly don't know which version. I could have possibly been looking at one of the wrong threads. Please let me know how i should proceed. Also, cm is aosp, right?
Click to expand...
Click to collapse
They are all based off the Linux kernel. You just need to make sure you're flashing the correct version intended for your ROM. The later ROMS are running off Linux 3.4.x. However, Keep in mind that the latest kernels will NOT work on ROMs that were released before 4/19. Be sure to only flash the updated kernels released on that date or later or your phone will not boot . So in your case you must update to one of the latest CM nightlies (AFTER 4/19) if you wanna flash any of these later 3rd party kernels.
For future reference you can check the linux version of any ROM in Settings > About Phone> Kernel version. Also do some more reading next time bud. This whole kernel deal has been discussed countless times in numerous threads.
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
They are all based off the Linux kernel. You just need to make sure you're flashing the correct version intended for your ROM. The later ROMS are running off Linux 3.4.x. However, Keep in mind that the latest kernels will NOT work on ROMs that were released before 4/19. Be sure to only flash the updated kernels released on that date or later or your phone will not boot . So in your case you must update to one of the latest CM nightlies (AFTER 4/19) if you wanna flash any of these later 3rd party kernels.
For future reference you can check the linux version of any ROM in Settings > About Phone> Kernel version. Also do some more reading next time bud. This whole kernel deal has been discussed countless times in numerous threads.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
thanks for taking the time to give me good info. I have searched and will continue to do so on anything that I have questions about. I'm brand new to this world so some of these things go right over my head. Once again, thanks!

nickcross88 said:
thanks for taking the time to give me good info. I have searched and will continue to do so on anything that I have questions about. I'm brand new to this world so some of these things go right over my head. Once again, thanks!
Click to expand...
Click to collapse
You're welcome dude and welcome to XDA!
Sent from my Nexus 4 using xda premium

OK, I'm also having troubles with tethering. While I have very few posts here, I'm not exactly inexperienced. I've been putting custom ROMs on since I had my G1.
I'm running a recently nightly of CM10.1 (4/20 so a 3.4 kernel) and obviously (as discussed above) it can't natively do wifi tethering. Found this thread and a couple others stating a needed a different kernel (that's a first for me, hadn't ventured into changing kernels).
Searched around and initially went with BMS, however I had the same problem - no wifi tethering.
Based on the advice here, downloaded and installed Ktoonsez's K747 kernel. Same thing.
In all cases, I've tried with WPA2 and unsecured. In all cases, devices can see the AP and can connect but no data is transferred. There has got to be something simple I am missing here. I really miss tethering (use it for internet on my Transformer Prime when I'm on the road).

jasonvr said:
OK, I'm also having troubles with tethering. While I have very few posts here, I'm not exactly inexperienced. I've been putting custom ROMs on since I had my G1.
I'm running a recently nightly of CM10.1 (4/20 so a 3.4 kernel) and obviously (as discussed above) it can't natively do wifi tethering. Found this thread and a couple others stating a needed a different kernel (that's a first for me, hadn't ventured into changing kernels).
Searched around and initially went with BMS, however I had the same problem - no wifi tethering.
Based on the advice here, downloaded and installed Ktoonsez's K747 kernel. Same thing.
In all cases, I've tried with WPA2 and unsecured. In all cases, devices can see the AP and can connect but no data is transferred. There has got to be something simple I am missing here. I really miss tethering (use it for internet on my Transformer Prime when I'm on the road).
Click to expand...
Click to collapse
i downloaded the new kernel and had wifi instantly.did you wipe both caches? that was really the only direction that came with it. Have you rebooted and wiped both again?

nickcross88 said:
i downloaded the new kernel and had wifi instantly.did you wipe both caches? that was really the only direction that came with it. Have you rebooted and wiped both again?
Click to expand...
Click to collapse
Rebooted and have wiped cache, dalvik, and fixed permissions per the instructions in Ktoonsez's thread
I'll try rebooting and wiping both again
Edit:
No effect. Same problem....

If you come up with a solution, please share it. My wifi tethering isn't working either.

jasonvr said:
Rebooted and have wiped cache, dalvik, and fixed permissions per the instructions in Ktoonsez's thread
I'll try rebooting and wiping both again
Edit:
No effect. Same problem....
Click to expand...
Click to collapse
It's honestly working fine for me.. Try the latest nightly and KT kernel see if it makes any difference.
Sent from my SGH-T999 using xda premium

LuigiBull23 said:
It's honestly working fine for me.. Try the latest nightly and KT kernel see if it makes any difference.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Something is clearly wrong here. I just did a completely clean flash (factory reset/wipe) of the latest nightly and then laid on the latest KT kernel and I still have no hotspot ability whether with WPA2 or open. I can see the hotspot but no data transfers.

the townrea
jasonvr said:
Something is clearly wrong here. I just did a completely clean flash (factory reset/wipe) of the latest nightly and then laid on the latest KT kernel and I still have no hotspot ability whether with WPA2 or open. I can see the hotspot but no data transfers.
Click to expand...
Click to collapse
Hmm, USB tethering doesn't work either. I'm guessing there is one common cause

By golly, I think I've got it. I did ANOTHER wipe and install and immediately tried the hotspot and it worked. Prior to this, I noted that my CWM was horribly out of date and was not 3.4 kernel aware (as evidenced by nested 0 directories). So I fixed that and then flashed and it worked. I then went to work restoring data using Titanium backup and that's when things went to hell. Something in the restore hoses the ability to use the hotspot. So now I am doing a more controlled recovery hoping that I can get back all the data I need without hosing the hotspot.
So, this explains why a dirty flash didn't work. Whatever breaks it was obviously there under the dirty flash. And my previous clean flashes always had a restore via TB immediately afterwards.
So, not sure whether it is only the restore issue, or if the old CWM also had a hand in it, but either way, I think I'm gonna succeed here.

Can someone post a step by step fix please?
I have the same problem; I have tried to replicate the solutions here, to no avail. Flashed anew, still same problem.
Can someone please post a step-by-step fix? Can I just flash a new kernel and be done? I'm on CyanogenMod ROM, 4.4.2, 11-20140210.
Thanks!

CM 10 from CMTeamEpic nightlies

Has anyone still been getting these nightlies? Just checked this and had an update for cm10.1 which I thought was odd because it says the romantic was abandoned and I installed the update and now there is no service on my phone. Wifi still works though anyone else have this problem?
Sent from my Nexus 7 using Tapatalk HD

What Rom are you running? And where did you get it?
Sent from my Jelly Flavored Epic Touch

Double check to make sure you are not running a JB Modem??

btaylor545 said:
Has anyone still been getting these nightlies? Just checked this and had an update for cm10.1 which I thought was odd because it says the romantic was abandoned and I installed the update and now there is no service on my phone. Wifi still works though anyone else have this problem?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Are you talking about CMTeamEpic's CM10.1 nightlies? If so, I have flashed them as well. Once I do (regardless of a CM10 --> CM10.1 or Stock rooted GB/ICS --> CM10.1), I get the same problem with the modem. Under the about tab of settings, I see "Baseband Version Unknown". As seen in the attached screenshot. I'm going to continue to play around with the builds to see if I can find a workaround. Have you found one yet?
EDIT: I have also tried flashing the build then flashing the FF18 modem and then FL24 modem (both are ICS modems from rwilco) to no avail.
EDIT 2: You might want to change (or ask a moderator to change) the title of the OP to CM10.1, since that's what you're asking about.
EDIT 3: I figured out what the problem was. Some files leftover after flashing conflict with the 4.2.2 CM10.1 build. What I did to fix it was this: backup any important files on the internal memory, flash back to a stock ICS build (I chose FF18), factory reset from within the build (this clears everything on the internal memory), flash to a rooted ICS build (again, I chose FF18), flash a safe CWM bootloader, and flash the nightly you want. Hope this helps. Respond or PM me if you want more details.

dastin is using phantom freaks build bot and will be generating his nightlies. that's what your seeing. The other dev works was abandoned.
clean flash since its an entirely diff kernel now.

Sorry tried a couple different ways then gave up and went to CM 10.1 wild on the night. But what had happened was I was on CMTeamEpic's CM 10 4.1.2 and it sent me a CM 10.1 nightly in the CMupdater and I Installed it and the modem was crap but now that there is a work around for Netflix on Wild I'm sticking to this one. sorry I responded so late been crazy busy with work and what not.
Sent from my SPH-D710 using Tapatalk 2

[Q] Unstable NS4G modem and Slim Rom

I have read the Slim Rom thread and other NS4G threads extensively, and don't have a good answer for this.
Why does my Epic 4g occasionally get the "No Baseband" error (no radio)? This happens after a reboot, or if I reboot into TWRP recovery and clear caches. To fix, I have to reflash Switch2NexusModem.zip and then EFFSI's kernel.
I did follow steps provided by TexasEpic4G, in the Slim Rom thread:
IF ( and ONLY if ) you are currently on the nexus modem .....
1) wipe data/cache/dalvik
2) flash ROM
3) flash Gapps
4) flash http://goo.im/devs/effsi/Misc/Swap2NexusMdm.zip
5) Nexus Modems can be found here - http://forum.xda-developers.com/show...83&postcount=1
6) flash kernel http://goo.im/devs/effsi/JB/Kernel/N....2Nm-0308m.zip
PROFIT​
I am on the default TWRP included in EFFSI rom.
I have never ODIN'd a radio, but am thinking that may help.
Any thoughts?

After you flash everything, reboot to recovery and flash the modem again. It may or may not work, but every time I had your problem, rebooting to recovery and flashing the modem again usually fixed it.
Sent from my SPH-D700 using Tapatalk 2

Others have mentioned needing to flash modem twice in order to get it to "stick" ... so apparently it's a common issue but easy to work with ...
Sent from my SPH-D700 using xda premium

That or might need a fresh odin if its been awhile I was getting some crazy baseband issues and I ran odin and all is well
Sent from my SPH-D700 using xda app-developers app

pentium0 said:
I have read the Slim Rom thread and other NS4G threads extensively, and don't have a good answer for this.
Why does my Epic 4g occasionally get the "No Baseband" error (no radio)? This happens after a reboot, or if I reboot into TWRP recovery and clear caches. To fix, I have to reflash Switch2NexusModem.zip and then EFFSI's kernel.
I did follow steps provided by TexasEpic4G, in the Slim Rom thread:
IF ( and ONLY if ) you are currently on the nexus modem .....
1) wipe data/cache/dalvik
2) flash ROM
3) flash Gapps
4) flash http://goo.im/devs/effsi/Misc/Swap2NexusMdm.zip
5) Nexus Modems can be found here - http://forum.xda-developers.com/show...83&postcount=1
6) flash kernel http://goo.im/devs/effsi/JB/Kernel/N....2Nm-0308m.zip
PROFIT​
I am on the default TWRP included in EFFSI rom.
I have never ODIN'd a radio, but am thinking that may help.
Any thoughts?
Click to expand...
Click to collapse
Did you resolve the issue?

DynamicN said:
Did you resolve the issue?
Click to expand...
Click to collapse
Thanks everyone for your help! I should add that in addition to the NS4G problem, GPS was not working on my phone either.
I did ODIN back to FC09, but I had tried that before, and did not help NS4G for me.
I did come across the thread on EFS Clear, here:
http://forum.xda-developers.com/showthread.php?t=1226074
It fixed my GPS problem = )
I am on Ting, not sprint, but had no problems at all re-activating after doing EFS clear while on FC09.
I haven't had time yet to try NS4G again, but EFS clear did fix my GPS.
Will post back when I have results for NS4G.
Thanks again everyone! Love our Epic 4g community here.

Glad to hear things are working well for you now.

I was running into the same problem but flashing it, rebooting to recovery and reflashing it worked for me.

which one is the kernel on the ns4g thread ? iam newbie sorry

cdcaxe said:
which one is the kernel on the ns4g thread ? iam newbie sorry
Click to expand...
Click to collapse
The kernel's are on goo.im under devs and Didhiy or Effsi but the ns4g modems can be found here http://forum.xda-developers.com/showthread.php?t=1077168
I know it's alot to take in but read, read and read some more lol. Everyone has to start somewhere, read this thread for more information http://forum.xda-developers.com/showthread.php?t=1842037&highlight=ns4g+modems and search qbking77 Epic 4g (make sure it's not Epic 4g touch) on YouTube.

S2 signal issues 4.2.2

Hi, I'm looking for a solution. I rooted my girlfriend's T-Mobile s2 and changed out the rom for slim 4.2 and it worked well without any signal issues. I then updated to a later build (build 6&7, tried both) and tried other 4.2.2 roms. I noticed she wasn't getting signal at all. I was told to install the 4.1.2 radio for it. I did just that, and it worked, she then had signal. I was hoping that did it, but no it now just has signal and constantly loses it and a reboot is needed. This happens on any ROM I use. Any idea(s)? It would be greatly appreciated. Thank you.
Sent from my XT926 using Tapatalk 4

Do you know what Radio you flashed for her if it was not MC6 grab it from here http://forum.xda-developers.com/showthread.php?t=1895400 all 4.2.2 ROMs need the newest radio , should be good to go

The_Blue_Bomber said:
Hi, I'm looking for a solution. I rooted my girlfriend's T-Mobile s2 and changed out the rom for slim 4.2 and it worked well without any signal issues. I then updated to a later build (build 6&7, tried both) and tried other 4.2.2 roms. I noticed she wasn't getting signal at all. I was told to install the 4.1.2 radio for it. I did just that, and it worked, she then had signal. I was hoping that did it, but no it now just has signal and constantly loses it and a reboot is needed. This happens on any ROM I use. Any idea(s)? It would be greatly appreciated. Thank you.
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
I am having the same issue and I started a thread about it also with no solutions yet. I flashed newest radio and still can't get any 4.2 Roms to work either, (for not getting signal, ie:radio) you are not alone! I have searched to no end and still have not found any answers. Started from scratch from both touch and non-touch CWM.

it has to be a hardware issue for you @Sargeue because if you went to stock and nothing has fixed your issues has to be the phone, Ive never had any signal issues with my s2 on the latest MC6 ever, so sorry you have having this issue give SAMMY a call if your not under warranty with T-mobile see what they can do for you

krazierokz said:
Do you know what Radio you flashed for her if it was not MC6 grab it from here http://forum.xda-developers.com/showthread.php?t=1895400 all 4.2.2 ROMs need the newest radio , should be good to go
Click to expand...
Click to collapse
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Sargeue said:
I am having the same issue and I started a thread about it also with no solutions yet. I flashed newest radio and still can't get any 4.2 Roms to work either, (for not getting signal, ie:radio) you are not alone! I have searched to no end and still have not found any answers. Started from scratch from both touch and non-touch CWM.
Click to expand...
Click to collapse
krazierokz said:
it has to be a hardware issue for you @Sargeue because if you went to stock and nothing has fixed your issues has to be the phone, Ive never had any signal issues with my s2 on the latest MC6 ever, so sorry you have having this issue give SAMMY a call if your not under warranty with T-mobile see what they can do for you
Click to expand...
Click to collapse
Sent from my XT926 using Tapatalk 4

The_Blue_Bomber said:
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Hey @blue if you/she like SLIM then flash this https://www.copy.com/s/eQvTcgdXKB0g/Cl3Kener/WICKEDAWESOME/Liquid-JB-v2.9-Linaro-Hercules.zip its updated liquid smooth and then flash the slim gapps you have, you will have the slim look and feel but with RADIO and report back if all else fails i say just stick to the slim you get signal on that's really weird you have issues with the latest radio or for ish and giggles try flashing the radio again a fresh download
Click to expand...
Click to collapse

The_Blue_Bomber said:
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Click to expand...
Click to collapse
i had this problem with slim too. i thought something went wrong with my phone or my area. but nope. what you need to do is go to mikeyman777 cm10.1 thread and find the uvmc6 tar file, then use odin to flash it. apparently just flashing the newest radio with twrp isn't enough because it's missing some files or something like that lol.
anyways i haven't had signal problems since flashing radio tar file. i've lost signal like once. before i was losing it everyday. hope this helps.
here: http://forum.xda-developers.com/showpost.php?p=43400405&postcount=3266

merrygocow said:
i had this problem with slim too. i thought something went wrong with my phone or my area. but nope. what you need to do is go to mikeyman777 cm10.1 thread and find the uvmc6 tar file, then use odin to flash it. apparently just flashing the newest radio with twrp isn't enough because it's missing some files or something like that lol.
anyways i haven't had signal problems since flashing radio tar file. i've lost signal like once. before i was losing it everyday. hope this helps.
here: http://forum.xda-developers.com/showpost.php?p=43400405&postcount=3266
Click to expand...
Click to collapse
Thank you!
Sent from my XT926 using Tapatalk 4