Develop Bugs

[q] what can i do?

Ok I have a STOCK HTC EVO 4G that has never been rooted or anything. For some reason it WON'T mount as disk drive but will charge and everything else normally! I'm on the LATEST sprint OTA too. Can anyone offer any advice or help. I have also tried HARD RESET, FACTORY RESET, & BATTERY PULL. There is also no port damage, I have never dropped phone in water or anything else either. People please help, I also have insurance with sprint
Sent From KaoMinerva

Try a different cord and make sure u have the drivers for you're computers os
Sent From My Pocket

Have you tried turning usb debugging on?
Edit: While I was in line at Sprint to get a replacement, I saw a guy that took his in for the same problem. They couldn't figure it out so they ordered a replacement. If you can't get anything to work then you can try taking it in.
Also install HTC Sync if you haven't already, and if you aren't using the stock cable try a different one. USB cords longer than a certain length (2 feet maybe) will only charge your device.
If you haven't tried a different port, try that as well.
Sent from my PC36100 using Tapatalk

This guys funny lol dude you still didn't figure this out you created a new thread to ask the same question instead of bumping your old thread

The cord I'm using once used to make it read in the ps3. All of a sudden it just stopped disk driving and yes I tried with debugging on! Idk if the new Sprint update did it but by the time I got around to trying to root it I had these issues
Sent From KaoMinerva

KaoMinerva said:
The cord I'm using once used to make it read in the ps3. All of a sudden it just stopped disk driving and yes I tried with debugging on! Idk if the new Sprint update did it but by the time I got around to trying to root it I had these issues
Sent From KaoMinerva
Click to expand...
Click to collapse
You keep the phone in charge only to root, so you can still root it.
Since it isn't rooted and you won't have to bother with unrooting, why not take it to Sprint and have them look at it? They can either tell you what is wrong and fix it or give you a replacement.
Sent from my PC36100 using Tapatalk

[Q] No power no nothing

I need some serious help. I just got this phone and was getting ready to root it and here is what happened. I opened up odin, unchecked f. reset time, put victory_8G_100528.pit in pit according to http://forum.xda-developers.com/wiki/SPH-D700-ODIN, then added stockdeoEC05.tar.md5 in PDA. Hit start and the screen said something about partition, the phone shut off and nothing since. I can't even get a charge. The phone has no life at all.
Please help

Try leaving your battery out for 30 min and see if you can get into download mode with usb plugged only. Also, check this thread. Its a guide for bringing a semi bricked epic back to life.
http://forum.xda-developers.com/showthread.php?t=1052813
Also see this for the most current one click root and revovery with cwm 3.1.0.1
http://forum.xda-developers.com/showthread.php?t=1076967

Thanks I will try but phone won't do anything so far... 30 mins it is...
What did I do wrong?

No luck...
Phone will still not power on, charge or go into download mode

smartbeatz said:
Phone will still not power on, charge or go into download mode
Click to expand...
Click to collapse
Take the sd card and batttery out, and plug in the charger llike this but while holding 1 and the power button at the same time
Sent from my SPH-D700

You rock!
Phone is in downloading mode and I'm downloading the tar from the link you gave me. Any idea what happened so I don't do it again? This was my first time using Odin so I'm not familiar with it. Did I set it up right? I have to learn from my mistakes and I promised my mom m Moment, which I had to reactivate just now. Geez Laweez...

Glad to hear it. I would buy a better usb cable for the future if you are still using the stock one.
Sent from my SPH-D700 using xda premium

The factory usb cable is great for charging but nothing else. You need a good cable for data transfer. I always use my old Blackberry usb cables they are awesome, BB depend on a lot of data sync with the computer their cables are great.
Sent from my SPH-D700 using xda premium

Here we go...
Okay now I can't get the pc to recognize the device. I tried the drivers from the pack ont those links you gave me prior, and even tried some others. Swapped 3 different usb cords too BTW the only thing it will do is go to download mode by taking battery & card out, plugging in usb while holding 1 & power.

smartbeatz said:
Okay now I can't get the pc to recognize the device. I tried the drivers from the pack ont those links you gave me prior, and even tried some others. Swapped 3 different usb cords too BTW the only thing it will do is go to download mode by taking battery & card out, plugging in usb while holding 1 & power.
Click to expand...
Click to collapse
Did you reboot your computer after installing the drivers?
Sent from my SPH-D700 using xda premium

Yes I did. Still have the same issue. Last time it worked was when I used Odin and the phone never rebooted. That's what started this thread.
I'm trying to see what happens when I try this on my desktop... Will update soon...

Drivers not working
Even when I tried my desktop (XP, laptop Win 7) I got the same results... Device not recognized...
Even when I click on there was a problem with the device message and go to update driver, it tells me there is no driver installed or needed for this device. I'm hopeful this can be fixed but I can't get the device to be seen and it's stuck in downloading mode. I have searched all the forums and haven't seen this issue yet. Does anyone know how to fix this when it only turns on without the battery in while plugging in the USB and holding 1 & power? I had issues with the device being seen before this happened but man I'm lost as what to try. I even tried the one on the samsung site... of course uninstalling the previous ones and resetting the computer before my attempts.

Are you using the usb ports in the back of the computer that are directly connected to the motherboard?
Sent from my SPH-D700 using xda premium

Phone is reset!!! All is good!!!
Now everyone said to not use the usb that came with but you know what... I went to work and grabbed it and it worked... Phone is getting worked over as we type...
Thanks for all your help. I want to lean more about development so if anyone can point me in a good direction???

smartbeatz said:
Now everyone said to not use the usb that came with but you know what... I went to work and grabbed it and it worked... Phone is getting worked over as we type...
Thanks for all your help. I want to lean more about development so if anyone can point me in a good direction???
Click to expand...
Click to collapse
Cooooool I helped lol glad to see my method for getting into download mode worked for you!
Sent from my SPH-D700

I owe you...
If it weren't for you I'd be still looking at my phone mad as hell ready to sell it off for parts... Thanks to you I'm up and running 2.4 now clockworked and all. I just want to learn more about development so I can return the favor to others.

smartbeatz said:
If it weren't for you I'd be still looking at my phone mad as hell ready to sell it off for parts... Thanks to you I'm up and running 2.4 now clockworked and all. I just want to learn more about development so I can return the favor to others.
Click to expand...
Click to collapse
I was in the samee dilema, that came from expirience man lol, except no one told me this so I figured it out on my own. I'm srprised how calm I was actually lol.
As for the development stuff I'm not so sure
Sent from my SPH-D700

I'm Screwed & Offering A Bounty

So here's the deal: I got my E4GT and rooted it. Everything was fine until I let my son play a game on my phone and the USB cable became unplugged. He decided to "help" me and plug it back in. In doing so, he bent the cable end to 90 degrees and jacked up my USB port. It will charge, but the PC does not recognize it for data. I worked with another user on here to come up with any ideas to restore to stock so I could exchange it. The closest that I came was going back to a stock kernel. Unfortunately, it is now stuck in a boot loop and I can't flash anything else since I am back to stock kernel. I tried to take it to my local store for repair, figuring that I would offer the guy some cash to just get it back to booting correctly. Unfortunately, I must have the one guy at the one store where they don't bend the rules. So right now I have a paperweight. I will pay anyone who can come up with a fix a $50 bounty. I'm really hoping that I don't have to just pitch this thing.
Thanks and feel free to PM any solutions.

Do you have Sprint TEP? If so, you can probably get it exchanged for no cost. If not, it would be $35.

bradspace said:
So here's the deal: I got my E4GT and rooted it. Everything was fine until I let my son play a game on my phone and the USB cable became unplugged. He decided to "help" me and plug it back in. In doing so, he bent the cable end to 90 degrees and jacked up my USB port. It will charge, but the PC does not recognize it for data. I worked with another user on here to come up with any ideas to restore to stock so I could exchange it. The closest that I came was going back to a stock kernel. Unfortunately, it is now stuck in a boot loop and I can't flash anything else since I am back to stock kernel. I tried to take it to my local store for repair, figuring that I would offer the guy some cash to just get it back to booting correctly. Unfortunately, I must have the one guy at the one store where they don't bend the rules. So right now I have a paperweight. I will pay anyone who can come up with a fix a $50 bounty. I'm really hoping that I don't have to just pitch this thing.
Thanks and feel free to PM any solutions.
Click to expand...
Click to collapse
Just because you're on a stock kernel doesn't mean you can't flash in Odin. I don't understand. Can you or can you not get into download mode (Vol. Down + Power)?
Sent from the future.

Have you tried using a different USB cable than the one that got bent?
Here's the ODIN tutorial http://forum.xda-developers.com/showthread.php?t=1274337 and this a back to stock you can use http://forum.xda-developers.com/showthread.php?t=1282420 this will be your only way out since you said you don't have CWR any longer cause of the stock kernel that "someone" had you install.
"IF' you are able to get in to download mode, this TAR will get you back to stock so you can start fresh. If the USB connection is jacked up for good, then you're sol.
In that case I would odin some weird **** just to jack it up completely then call in for a warranty replacement free of charge.

You should be able to do a "factory reset" with stock recovery, this may stop the boot loop.

Did you see the part where his PC won't recognize USB for data?
sent from my Epic 4g Touch

Can you get into recovery at all? Power+volume up

Duce HD2 said:
Have you tried using a different USB cable than the one that got bent?
Here's the ODIN tutorial http://forum.xda-developers.com/showthread.php?t=1274337 and this a back to stock you can use http://forum.xda-developers.com/showthread.php?t=1282420 this will be your only way out since you said you don't have CWR any longer cause of the stock kernel that "someone" had you install.
"IF' you are able to get in to download mode, this TAR will get you back to stock so you can start fresh. If the USB connection is jacked up for good, then you're sol.
In that case I would odin some weird **** just to jack it up completely then call in for a warranty replacement free of charge.
Click to expand...
Click to collapse
yeah, my cable would do exactly as he said where it would charge but not do data, new cable fixed that

coldblooded79 said:
Did you see the part where his PC won't recognize USB for data?
sent from my Epic 4g Touch
Click to expand...
Click to collapse
Did you see the part where I said maybe trying to replace the cable??
Sent from my SPH-D710 using xda premium

And here is the winner...I have done this with several devices and it always works:
Put it in the microwave.
Set the cook time for 2 second.
Press start.
It will completely fry the inside of your device. It will never turn on again. They will be unable to tell what caused the phone to malfunction. IT WILL NEVER TURN ON AGAIN...LOL!
Voila...return the phone as "defective"
Pm me with any questions you may have...
Sent from my SPH-D710 using Tapatalk

edit...deleted post

SocialReject said:
Just because you're on a stock kernel doesn't mean you can't flash in Odin. I don't understand. Can you or can you not get into download mode (Vol. Down + Power)?
Sent from the future.
Click to expand...
Click to collapse
I CAN get into Odin mode, but because my USB port is jacked up the PC doesn not recognize it so Odin does not see it.

kse91holydiver said:
Can you get into recovery at all? Power+volume up
Click to expand...
Click to collapse
I can get to recovery, but because I went back to stock kernel I can't flash any ROM's.

Sunsparc said:
Do you have Sprint TEP? If so, you can probably get it exchanged for no cost. If not, it would be $35.
Click to expand...
Click to collapse
I don't have it and I can't add it after 30 days or so I was told at the Sprint store.

Duce HD2 said:
Have you tried using a different USB cable than the one that got bent?
Here's the ODIN tutorial http://forum.xda-developers.com/showthread.php?t=1274337 and this a back to stock you can use http://forum.xda-developers.com/showthread.php?t=1282420 this will be your only way out since you said you don't have CWR any longer cause of the stock kernel that "someone" had you install.
"IF' you are able to get in to download mode, this TAR will get you back to stock so you can start fresh. If the USB connection is jacked up for good, then you're sol.
In that case I would odin some weird **** just to jack it up completely then call in for a warranty replacement free of charge.
Click to expand...
Click to collapse
I've tried three or four different cables with no difference.

steindog99 said:
And here is the winner...I have done this with several devices and it always works:
Put it in the microwave.
Set the cook time for 2 second.
Press start.
It will completely fry the inside of your device. It will never turn on again. They will be unable to tell what caused the phone to malfunction. IT WILL NEVER TURN ON AGAIN...LOL!
Voila...return the phone as "defective"
Pm me with any questions you may have...
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
This may be a question for a Sprint rep, but would they have noted my records since I went to the store to have it repaired and admitted that it was rooted? If not then OI may take a damage route out if it'll work.

bradspace said:
This may be a question for a Sprint rep, but would they have noted my records since I went to the store to have it repaired and admitted that it was rooted? If not then OI may take a damage route out if it'll work.
Click to expand...
Click to collapse
Firstly, we're not supposed to reject phones for root. Our M&P's clearly state we work on rooted phones and does NOT void any warranty with us. So either call him out on that or find a different tech.
Secondly, the microwave idea? If i see so much as any board damage, the phone's getting rejected. Then your definitely put of luck because your device will be flagged as DBR an ineligible for exchange. Not a smart idea, considering responsible techs such as my self make it a point to inspect every phone internally if it's not turning on at all.
Sent from my SPH-D710 using xda premium

bradspace said:
This may be a question for a Sprint rep, but would they have noted my records since I went to the store to have it repaired and admitted that it was rooted? If not then OI may take a damage route out if it'll work.
Click to expand...
Click to collapse
I doubt they would have noted it, plus when he takes it in they would no way of knowing since phone is magically broken...
Sent from my SPH-D710 using Tapatalk

squshy 7 said:
Firstly, we're not supposed to reject phones for root. Our M&P's clearly state we work on rooted phones and does NOT void any warranty with us.
Click to expand...
Click to collapse
So how exactly do I "call him out"? My only option for a repair store is a horrible place. They are the only major store for MILES around and treat EVERY customer like ****. If I just say that he's supposed to work on it and there is nothing saying that the warranty is voided, he most likely is going to tell me to get bent.

bradspace said:
So how exactly do I "call him out"? My only option for a repair store is a horrible place. They are the only major store for MILES around and treat EVERY customer like ****. If I just say that he's supposed to work on it and there is nothing saying that the warranty is voided, he most likely is going to tell me to get bent.
Click to expand...
Click to collapse
is the usb port on the phone bent? Like loose or anything? you could always lookup how to open the phone and solder a replacement usb jack on. I believe its a simple 3 to 4 point solder on the edge of the board.

I think this phone is a goner..

I have researched with no help what so ever. A buddy of mine got a Epic Touch 4G and accidentally flashed gti9100 rom on there.
I told him I will try to help him out.
The battery that is in the phone is gone. It flashes blue when it's plugged to a power source and you cannot start the phone to "download Mode" with the battery.
As soon as you insert that battery and plug in power source, the phone attempts to turn on and at the bottom you get " 3 icons "Phone, triangle, computer" and underneath the icons it says "Firmware Encountered" and the rest I cannot read.
I have a Epic Touch 4g myself and no stranger to flashing and roms.(currently running codname). I can use m y battery in the other phone and it will allow me to turn it on and get to download mode. Problem is, I cannot get USB connection.
Tried different cable, computer, front ports, back ports, downloaded the gti9100 drivers instead on a different computer and still no connection. Really I do not think there is a fix, but giving one my try in the forums.
thanks

Best bet send in the phone was a manufacturer warrenty every phone was one I think. And tell them it wont turn on and u charged it for along time and call samsung and say tht
...or get a jtag repair for like 80bucks
Sent from my SGH-T989 using XDA

Do the responsible thing and pay the 80 for the jtag
Sent from my SPH-D710 using Tapatalk 2 Beta-5

One other possible thing that worked on old epics. Try taking the battery and external sd out for a day to let the internal ram clear. Then try going into dl mode with the phone plugged in but the battery removed.

The Root said:
One other possible thing that worked on old epics. Try taking the battery and external sd out for a day to let the internal ram clear. Then try going into dl mode with the phone plugged in but the battery removed.
Click to expand...
Click to collapse
Jtag is only thing that will work when he flashed the international ROM it disables the USB by flashing the bootloader from international.... Jtag , sprint , or Samsung is the only fixes nothing u can do
Sent from my SPH-D710 using Tapatalk 2

Epix4G said:
Jtag is only thing that will work when he flashed the international ROM it disables the USB by flashing the bootloader from international.... Jtag , sprint , or Samsung is the only fixes nothing u can do
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
This is not always true. When I first got my E4GT I flashed an international ROM too and it actually let me boot into it but it was really messed up everything was stuck in landscape mode and none of the capacitive keys would work. I could not connect to the PC while booted into the ROM but in download mode I was actually able to. I would give the idea of taking the battery and SD card out for a day a try. What can ya lose?

rbtrucking said:
This is not always true. When I first got my E4GT I flashed an international ROM too and it actually let me boot into it but it was really messed up everything was stuck in landscape mode and none of the capacitive keys would work. I could not connect to the PC while booted into the ROM but in download mode I was actually able to. I would give the idea of taking the battery and SD card out for a day a try. What can ya lose?
Click to expand...
Click to collapse
With USB not working it had a bootloader in the tar ..... there is no using Odin it will never connect......
Look back on the older pages and maybe there is some help when this phone first came out there were people everyday flashing international roms....but they were only fixed by jtag if my memory is right
Sent from my SPH-D710 using Tapatalk 2

http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
JTAG it for $50

Alrighty...Jtag it is..Thanks guys. Hopefully they are able to fix it.

don728871 said:
Best bet send in the phone was a manufacturer warrenty every phone was one I think. And tell them it wont turn on and u charged it for along time and call samsung and say tht
...or get a jtag repair for like 80bucks
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
You are a horrible person and the reason we get stuck with locked bootloaders.
Sent from my SPH-D710 using Tapatalk 2

I think I bricked my EPIC 4G -- Please help!

I know there's been several threads on this in the past and I've tried most if not all of the solutions in them (except for the JIG) to no avail.
My EPIC 4G was on stock GB and I tried to ODIN GB08 as per this thread. The process failed (the message didn't tell me much) and left my phone as it is now. No lights ever and no way to go into download mode or recovery mode.
I have:
- tried to go into download mode by pressing 1+Power without the battery or SD card and then inserting the battery
- tried to go into download mode by pressing 1+Power without the battery or SD card and then plugging the phone via USB (using different cables)
- left the phone charging overnight
- left the phone without the battery for a while and then attempting the steps above
Nothing. Not a peep. Not a little light or sign of life anywhere.
Did I fully brick my phone and have nothing to do other than use it as paperweight or sell for parts? Keep in mind I'm no longer on Sprint, so I don't think I could get it repaired by them.
Any help is appreciated, except for the little reset button under the camera. Let's not go there again. LOL

Don't flash ROMs designed for the Epic Touch 4G SPH-D710 on your SPH-D700 Epic 4G.
Sent from my SPH-D700 using Tapatalk 2

frostedunit said:
Don't flash ROMs designed for the Epic Touch 4G SPH-D710 on your SPH-D700 Epic 4G.
Click to expand...
Click to collapse
OMG!!! I didn't even realize! I googled "EPIC 4G ODIN GB08" (is that even the latest stock ROM?) and that was one of the results. I didn't even check!
Anything you would recommend at this point to get my phone back to life? Remember I'm no longer a Sprint user.

If you are indeed on our device, SPH-D700, and flashed a SPH-D710 ROM, then you're hosed.
Our device's last official release is FC09.
Learn from the mistake.

God, this is so ironic! The phone was perfect yesterday and the only reason I was upgrading from GB was to enjoy it for a little while as a backup WiFi only device and then sell it. It's MINT. It looks like it just came out of the box. Not the slightest scratch anywhere. That's how I kept it for the whole year I used it as my primary phone. And here I thought Samsung devices were unbrickable, since you could overwrite ANYTHING on them with Odin, including bootloader.

Someone on that forum suggested I buy and use a JIG. I wasn't really sure what it was, but found many on eBay and the description sounds like what I need. They claim to get you into download mode even if you're bricked. Is that wrong or non-applicable in my case after this huge screwup? Would this one work?

Razor1973 said:
Someone on that forum suggested I buy and use a JIG. I wasn't really sure what it was, but found many on eBay and the description sounds like what I need. They claim to get you into download mode even if you're bricked. Is that wrong or non-applicable in my case after this huge screwup? Would this one work?
Click to expand...
Click to collapse
To my knowledge, a jig should do the trick, but I'm not entirely sure. Only way to really find out is get one and try I guess. Or maybe someone else will pop in and answer.
Sent from my SPH-D700 using Tapatalk 2

I just bought this one. Wish me luck!

Razor1973 said:
I just bought this one. Wish me luck!
Click to expand...
Click to collapse
That would be your last bet basically. If it doesn't work then you definitely have a paperweight on your hands.

here http://www.youtube.com/watch?v=QTQ6Rn0FBSk leave battery in and if u get a fail then close odin take out battery and retry u should be fine

epic559 said:
here http://www.youtube.com/watch?v=QTQ6Rn0FBSk leave battery in and if u get a fail then close odin take out battery and retry u should be fine
Click to expand...
Click to collapse
You completely didn't read this thread. This guy flashed an Epic Touch rom on his Epic 4G. He's tried all normal methods of forcing download mode. He's at the last step before considering it a paperweight, which is using a jig.
Read and understand what is being asked and suggested prior to blindly posting.

i think I'm bricked too, any updates on the Jig method?

We're just waiting for razor1973 to update us on it.
Sent from my SPH-D700 using Tapatalk 2

Oh, sorry for the delay. I got the jig and it didn't work. No download mode. Nothing. My mint EPIC 4G (it doesn't have the slightest scratch of scuff anywhere) is now a paperweight because of a silly error on my part.

I have a bricked sph-d700 and noticed after fooling with it in the dark that when trying to get into download the device actually comes on. The screen lites up a little. It then won't turn off without pulling the battery. So, after every attempt to get into download pull the battery.
My problem is I can get into download but Odin does not see it. I have tried on a windows XP machine and Vista 32 machine. Windows see the device (Unknown Device) but does not recognize it as "Samsung USB so and so". Is"unknown device" good enough for Odin to see the device? I have tried several driver fixes and the cable I use I have used for data transfer and flashing another Samsung phone.
Where do I go from here?
Sent from my SGH-T959V using xda app-developers app

ed_coyle said:
I have a bricked sph-d700 and noticed after fooling with it in the dark that when trying to get into download the device actually comes on. The screen lites up a little. It then won't turn off without pulling the battery. So, after every attempt to get into download pull the battery.
My problem is I can get into download but Odin does not see it. I have tried on a windows XP machine and Vista 32 machine. Windows see the device (Unknown Device) but does not recognize it as "Samsung USB so and so". Is"unknown device" good enough for Odin to see the device? I have tried several driver fixes and the cable I use I have used for data transfer and flashing another Samsung phone.
Where do I go from here?
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Next time start a new thread for your problem; don't hijack someone else's. You sound like you have driver issues. Use a different USB port and if still nothing, another computer.