Related
YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html
coby kyros mid8048-8 stucks on start up logo screen after rom update can anyone tall me what to do o thing to make a sdcard boot but i dont know how pls helppppp.tnks
Hi,
I recently got a new Kindle fire and tried to root it.
I followed the instructions given in this post.
http://forum.xda-developers.com/showthread.php?t=1568340
However, my kindle fire seems to be stuck in an infinite boot loop after first step itself.
Here are the step I followed (I am using Windows 7 32bit).
1. Installed android sdk.
2. Updated the Kindle driver to install "android abd composite interface"
3. Downloaded all the required files in the platform-tools folder
Required files:
fbmode.zip - http://forum.xda-developers.com/show....php?t=1414832
twrp2 - http://teamw.in/project/twrp2/79
su - http://dl.dropbox.com/u/8699733/kindlefire/su
firefirefirefire http://forum.xda-developers.com/show....php?t=1369405
fastboot + adb for your OS of choice.
4. Followed following commands:
unzip fbmode.zip
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
5. After this, my kindle fire seems to have stuck in an infinite boot loop.
- It starts up only when a USB cable is connected.
- Power light is orange and not green
- It starts up Kindle Fire logo comes up, then shuts down again
- My computer is not detecting any device, probably because KF is in an infinite boot loop
- When I run adb devices -- no devices show up
- When I run fastboot command [fastboot -i 0x1949 flash bootloader .....] it says "waiting for devices"
- When I remove the USB cable from KF, It doesn't powers on (even after long pressing the power button).
- I tried many things posted on different forums on two laptops (Windows 7 32 bit as well as 64 bit) and using different USB cables but nothing worked.
- Only thing I haven't tried is Factory cable as I don't have it and don't have money to buy it.
PLEASE HELP!!
http://forum.xda-developers.com/showthread.php?t=1623244
Superuser not working
Thanks for the help with the charging issue Kinfauns!!!
I charged my kindle fire using stock charger and finally rooted it.
However, I am still not able to install android market on my KF.
After rooting Kindle (followed all the steps given in the thread), I installed Superuser.apk.
Then to install android market, I installed root explorer and downloaded Kindle Fire android market zip file. (followed instructions from one of the NAT3MIL's video on youtube).
First step is to install googleServicesFramework.apk file, which I did.
The next step is to move market.apk file to system/apps folder. However, when I tried doing that, I got a warning:
"Your phone doesn't appear to be rooted. This is requires in order to change or delete protected files such as this ......"
I don't understand why is it saying so as I have followed all the steps in the thread to root my KF?
How to check if the KF is really rooted?
Are there any settings to be changed in the superUser.apk?
Please help!!
Thanks a ton!!
Superuser not working
One more thing.
when I tried to update SU binary file,
I got following:
Downloading manifest .. OKAY!
parsing manifest.. Okay!
Latest Version = 3.0.3.2
Checking installed version .. legacy
Fixing database .. okay!
checking for busybox .. not found
Downloading custom busybox .. okay!
checking md5sum ... okay!
checking current install path .. fail!
Failed to find current installed su binary. Update cannot continue.
Does this mean I have to re-root the KF or just install the su binary file? how to do that?
Thanks!
Download the latest kindle fire utility and rerun it for permanent root.
Known Tricks
If you end up stuck at the yellow triangle, in KF Utility select Boot Normal, wait for it to say <waiting for device> and then press and hold the power button 20 seconds until the fire turns off, then when its off turn it back on. This sometimes happens, I have yet to find a clean solution If you end up stuck with a yellow triangle, do not EVER unplug it. Leave it plugged in. Check the windows drivers to make sure it isnt showing as "kindle" again. Fastboot is different and can cause this.
Please note: If your device can't be seen in fastboot mode, please make sure to install the drivers packaged with this, as it will show up afterwards. You can use the install_drivers.bat with the device plugged in for this.
Copied from the instructions of the kindle fire utility
Above are the tricks if you get stuck but after root install twrp then install fff
I would assume that your not rooted sounds that way to me.
By the way the yellow triangle will be replaced with the new bootloader a white kindle and a blue fire this will be considered the yellow triangle in the description. Good luck
Install permanent root
Install twrp
Install fff
All should be the newest at this point hopefully
Thanks ThePooch.
So, apparently I have to re-root my KF as for some reason it was not rooted correctly. Right?
I believe so the worst that could happen is it could fail if the file already exists but let's hope it goes fine
tanwar said:
Thanks ThePooch.
So, apparently I have to re-root my KF as for some reason it was not rooted correctly. Right?
Click to expand...
Click to collapse
You don't necessarily have to let KFU do its entire "rooting" process.
If you can get into recovery and you are comfortable with adb, you can follow the "Rooting the stock software" section in this guide...
http://forum.xda-developers.com/showthread.php?t=1638452
to push the 'su' binary into the /system partition and set ownership/permissions.
If you are not comfortable with that, you can use KFU, but it will be doing a lot of extraneous things that you probably don't need.
Under extras you will put on Google frame work and go launcher after you have confirmed bootloader recovery and root note that the market can only be seen using go launcher not the kindle one.
---------- Post added at 12:32 AM ---------- Previous post was at 12:13 AM ----------
The easiest way to test root is to download an app that will request root permissions like root explorer for instance if you open the app and you don't see a dialogue pop up requesting permission its very likely that it isn't rooted.
Read-Only file system
Thanks Kinfauns and ThePooch for tips.
@kinfauns, I tried following the steps given in "Rooting the stock software" section of the given link.
http://forum.xda-developers.com/showthread.php?t=1638452
However, when I tried to push su binary file to system folder
adb push C:\kfu\software\su /system/xbin/
I got following message:
failed to copy 'su' to 'system/xbin/su': Read-only file system.
How can I change the permissions of the folder to copy su file?
I tried using shell command:
adb shell chmod 755 /system
However, I got the same message again "Read-only file system"
Please help!!
nevermind I see your on windows 7 like me. adb shell mount system will mount system to read/ write
its all in kinfauns post you just need to be it recovery to execute the commands I believe I would paste it here but its just as easy to read them from there
adb shell chmod 6755 /system/xbin/su not 755 you can probably safely copy and paste the commands from his post right into cmd he has it written up very nicely
tanwar said:
Thanks Kinfauns and ThePooch for tips.
@kinfauns, I tried following the steps given in "Rooting the stock software" section of the given link.
http://forum.xda-developers.com/showthread.php?t=1638452
However, when I tried to push su binary file to system folder
adb push C:\kfu\software\su /system/xbin/
I got following message:
failed to copy 'su' to 'system/xbin/su': Read-only file system.
How can I change the permissions of the folder to copy su file?
I tried using shell command:
adb shell chmod 755 /system
However, I got the same message again "Read-only file system"
Please help!!
Click to expand...
Click to collapse
I think you may be trying to do this while booted into the system software. That won't work because you don't have root access there and you won't be able to mount (or remount) a partition without those privileges. The rest of it won't work without R/W access to the partition, as you've already seen.
To be clear, the device needs to be booted into recovery (TWRP or CWMR) where you do have root privileges. Make sure you start with step one to get the system partition mounted. If successful, "mount" will provide no output.
So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...
First of all, what recovery are you using?
Bornxero said:
So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...
Click to expand...
Click to collapse
/data/local/tmp not /data/local/temp
soupmagnet said:
First of all, what recovery are you using?
Click to expand...
Click to collapse
think i was using cwm cant remember for sure but i cant get it to boot into anything but the cm9 bootscreen...
and tmp vs temp doesnt matter...all directories show either no such directory or read only system
Bornxero said:
think i was using cwm cant remember for sure but i cant get it to boot into anything but the cm9 bootscreen...
and tmp vs temp doesnt matter...all directories show either no such directory or read only system
Click to expand...
Click to collapse
It is important to know because the newer ICS roms won't work with CWM, only TWRP.
from the screenshots ive seen of twrp looks like it was cwm...I just want to be able to restore to stock first then I'll do another rom via twrp...
I previously loaded the hellfire ICS without issue as well...
Hey is it a 3.0 kernel from like energy's, I ,may have your answer then. I just need to know if thats the issue you are having.
Sent from my Amazon Kindle Fire using Tapatalk 2
Bornxero said:
I previously loaded the hellfire ICS without issue as well...
Click to expand...
Click to collapse
How recently? Trust me, from what I've seen here, you need TWRP. None of the 3.0 kernel based ICS roms work well or at all with CWM these days, including Hellfire.
Bornxero said:
So I was loading a new cm9 rom last night and everything seemed fine until reboot now its stuck at the roms boot screen...
So I attempted to get it to reboot to recovery or fast reboot no dice...
went through all the forums and couldnt get anythign to work...
adb devices sees my kindle fine...
i can adb shell and do a ls and it see directorys and i can cd to a different directory...
and time i try too do the commands to push fbmode or any of that i always get
failed to copy 'fbmode' to '/data/local/temp': No such file or directory
if i try to put it in a different directory or mkdir through shell i get an error for read-only file system
someone please help me out here...
Click to expand...
Click to collapse
I would try to use KF utility which is very useful for all kinds of issues with KF and very easy to use. It has helped me a great deal.
Yea its was a 3.0 kernel...gedeROM..
forest1971 said:
I would try to use KF utility which is very useful for all kinds of issues with KF and very easy to use. It has helped me a great deal.
Click to expand...
Click to collapse
I deff. tried everything in the kindle unbrick utility if thats what your talking about...
Bornxero said:
I deff. tried everything in the kindle unbrick utility if thats what your talking about...
Click to expand...
Click to collapse
I'm guessing you still have the stock bootloader ("kindle fire" bootlogo when the device first powers up) or you would have gotten yourself to recovery already. You'll want to try and get the bootmode changed to recovery and reboot like this...
Code:
adb shell idme bootmode 5001
adb reboot
If you can get back to CWMR, the first thing you should do is flash a new bootloader... probably FFF 1.4a that you can find in the dev section. Then use that to get into fastboot mode and flash TWRP.
If you cannot change bootmodes through adb. You'll have to push fbmode or rcmode in some writeable directory. I'm guessing /data/local/tmp doesn't exist in CM9, so try pushing it to /data instead.
If none of that works and my guess about your bootloader is right, you're going to need a factory cable.
kinfauns said:
I'm guessing you still have the stock bootloader ("kindle fire" bootlogo when the device first powers up) or you would have gotten yourself to recovery already. You'll want to try and get the bootmode changed to recovery and reboot like this...
Code:
adb shell idme bootmode 5001
adb reboot
If you can get back to CWMR, the first thing you should do is flash a new bootloader... probably FFF 1.4a that you can find in the dev section. Then use that to get into fastboot mode and flash TWRP.
If you cannot change bootmodes through adb. You'll have to push fbmode or rcmode in some writeable directory. I'm guessing /data/local/tmp doesn't exist in CM9, so try pushing it to /data instead.
If none of that works and my guess about your bootloader is right, you're going to need a factory cable.
Click to expand...
Click to collapse
w00t solved thanx....i was crying over here lol...
used this to put back the old rom I was using then used KFU to install twrp and installed the new rom without issue....
thanx again....
My kf2 was working fine but I ran out of room to install apps. I deleted unneeded apps still not enough room. I booted into twrp did a full wipe and now I can't side-load any roms to install. Twrp shows no OS installed. It will boot into twrp fine but nothing else. I have a fastboot cable. My computer recognizes my kf2 as an adb device but I can't seen to get anything to load. Some of the commands in KFFAID work but not all. I am trying to load cm11 and kitkat back. Any help would be appreciated.
James
getnby said:
My kf2 was working fine but I ran out of room to install apps. I deleted unneeded apps still not enough room. I booted into twrp did a full wipe and now I can't side-load any roms to install. Twrp shows no OS installed. It will boot into twrp fine but nothing else. I have a fastboot cable. My computer recognizes my kf2 as an adb device but I can't seen to get anything to load. Some of the commands in KFFAID work but not all. I am trying to load cm11 and kitkat back. Any help would be appreciated.
James
Click to expand...
Click to collapse
if sideload doesnt work then just do this, put the rom you want to flash and its gapps in the folder that adb is in, and run this while booted into twrp: adb push romnamegoeshere /sdcard/
then you can install the rom from inside twrp
didn't work
stunts513 said:
if sideload doesnt work then just do this, put the rom you want to flash and its gapps in the folder that adb is in, and run this while booted into twrp: adb push romnamegoeshere /sdcard/
then you can install the rom from inside twrp
Click to expand...
Click to collapse
Here is what happened. It said the device was not found. In the device manager it shows adb device under kindle fire.
Look on your task manager and kill every instance of adb.exe that you see and try again, I had that happen before when multiple instances were running. As long as it is in twrp then adb should work. If it continues to not work then uninstall the adb driver and if you see the MTP kindle device still there remove it as well, there might be a composite device that needs removing too, I find it a pita going between fastboot, recovery and whatever ROM os flashed if I use windows because of this, the drivers constantly have to be reinstalled when you change modes for me, hence why I avoid working with my kindle in windows and instead just use Linux. If you see any USB composite devices, check the hardware id's for a vid of 1949, if it has that then feel free to uninstall it. This may sound a bit complex, if you need more of an explanation just tell me.
Sent from my Amazon Kindle Fire HD using Tapatalk
No luck
stunts513 said:
Look on your task manager and kill every instance of adb.exe that you see and try again, I had that happen before when multiple instances were running. As long as it is in twrp then adb should work. If it continues to not work then uninstall the adb driver and if you see the MTP kindle device still there remove it as well, there might be a composite device that needs removing too, I find it a pita going between fastboot, recovery and whatever ROM os flashed if I use windows because of this, the drivers constantly have to be reinstalled when you change modes for me, hence why I avoid working with my kindle in windows and instead just use Linux. If you see any USB composite devices, check the hardware id's for a vid of 1949, if it has that then feel free to uninstall it. This may sound a bit complex, if you need more of an explanation just tell me.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
My computer only recognizes the kindle as an adb device in fastboot mode. I haven't been able to use any of the adb commands on it with any luck. It says device not found. This only shows in kffaid version 4.1.87-beta.
*facepalm* you don't use adb commands with fastboot, you use fastboot commands with fastboot. When it is in twrp it should have adb access though...
Sent from my Amazon Kindle Fire HD using Tapatalk
I think I have a driver issue. I forgot to thank you for your help. If I could send the zip rom and gapps I could get it back to where it was. Is there anyway to start all over from the original kindle OS at this point?
Thanks you
You coukd restore it in fastboot using kffa but it seems like unnecessary work. I would boot a ubuntu 13.10 live cd/usb and just attempt it from there since there won't be any driver issues.
Sent from my LG-P769 using Tapatalk
I tried Ubuntu 12.04 LTS and it was to much trouble. I will try Ubuntu 13.10. I will have to learn the commands to use it.
Thanks
getnby said:
I tried Ubuntu 12.04 LTS and it was to much trouble. I will try Ubuntu 13.10. I will have to learn the commands to use it.
Thanks
Click to expand...
Click to collapse
these commands should do the trick assuming the repos are all active in the downloadable section of the software updates control panel.
Code:
sudo apt-get update
sudo apt-get install android-tools-fastboot
and after that the fastboot command will work but keep in mind to give it superuser privis with sudo or it probably wont work, i had forgotten that recently on my own pc since i don't deal with fastboot too often. ex: sudo fastboot -i 0x1949 getvar product
I had to work all weekend. I tried to get access through ubuntu 13.10. I used the commands you provided (sudo apt-get update). This command worked fine. When I used this command (sudo apt-get install android-tools-fastboot) It said I had to enable universe. I did some research and got that working and tried to use this command again (sudo apt-get install android-tools-fastboot) then this one worked fine. Then I tried the last command with my kindle in fastboot mode flashing green light (sudo fastboot -i 0x1949 getvar product ). The message was cannot connect to otter-2 ... device. Same thing I have been getting all along.
I think when I wiped the system I cleared all the software to connect to any external device. I don't know if I can even get access to restore the original OS. If you haven't guessed by now I an a noob. I think you realized that with my adb commands with fastboot enabled. I got the impression you knew when I saw the *facepalm* comment the the beginning of you post. When my kindle is booted to twrp my computer does not recognize it. My computer will recognize as an adb device when in fastboot mode. My computer will recognize it as a kindle (with a yellow triangle in the device manager) when it is trying to boot with the white and blue logo. I don't know what to do at this point. Here is a screen shot with adb side load from twrp.
Interesting, seems that data didn't want to mount. Have you tried adb from Linux while in twrp? Just run "sudo apt-get install android-tools-adb" to install the command, if you can get adb access at least then I may be able to help fix this depending on what exactly is wrong. BTW I didn't exactly think you were a noon with that facepalm, I just see people get that misconception a lot about adb and fastboot commands. What exactly did that fastboot command report back, I was surprised it was an error when I saw otter2 in the error considering that was what that command was sort of supposed to report back.
Sent from my Amazon Kindle Fire HD using Tapatalk
Here is where I am. See below. Now where do I put the file in ubuntu so I can access it from the terminal window. I am running ubuntu from a live CD. I tried the push command but it says no such file or directory. I told you I was a noob!
[email protected]:~$ adb devices
List of devices attached
0123456789ABCDEF recovery
Since adb is in a system path must out it in the current directory you are CD'd into, if you left the terminal alone it should be in ~ (the home folder of the Ubuntu account) so photo the home folder and drop it in there and run "adb push filename /sdcard/"
Considering that /data doesn't want to mount and that /sdcard os technically in /data, that command might not work depending on what's going on. I reccomend seeing if you can first and if not goto the months and mount /cache if its not mounted already, and they pushing a twrp update into it to try to reflash twrp, its small enough I think it should fit into the cache, though I don't think a ROM would fit.
Sent from my Amazon Kindle Fire HD using Tapatalk
I installed ubuntu on my laptop with windows 7. It seems to work better. I put the files in the home folder and the user folder. I mounted the cache and ubuntu said instead of unable to mount it was unable to access kindle now. Here is the terminal window results.
[email protected]:~$ sudo apt-get install android-tools-adb
[sudo] password for user:
Reading package lists... Done
Building dependency tree
Reading state information... Done
android-tools-adb is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[email protected]:~$ adb push cm-10.2-20130908-UNOFFICAL-otter2.zip /sdcard/
cannot stat 'cm-10.2-20130908-UNOFFICAL-otter2.zip': No such file or directory
[email protected]:~$
Um OK well the filenames are case sensitive in Linux so lookout for that. Also if it was in your home folder then it should have worked as long as you didn't CD anywhere else in the terminal first.
Sent from my Amazon Kindle Fire HD using Tapatalk
Problem Fixed
I fixed my problem. I had to restart my kindle into recovery mode and connect the fastboot cable to the computer and kindle before it booted into TWRP. At that point while booted into TWRP I used the push command in ebuntu terminal to sideload cm11 and gapps. After I loaded them I installed them with TWRP and rebooted. Now it is restored to where it was when I wiped it. I will not do the advanced wipe again.
adb push cm-11-20140202-NIGHTLY-otter2.zip /sdcard/
adb push gapps-kk-20131119.zip /sdcard/
Thanks for your help stunts513
Click to expand...
Click to collapse
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
kyleyarbrough said:
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
Click to expand...
Click to collapse
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
HI! thanks for that advice. I wish I could. I've tried several methods, and although I can get into ADB shell, I can't access su:
besides kindle fire first aide and other batch files, I found some manual instructions:
http://forum.xda-developers.com/showthread.php?t=2277105
Here's what it tells me to do (among many other things): I realize this is just backing up stuff that doesn't exist etc, but it's indicative of the problems without having su.
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/boot of=/sdcard/stock-boot.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery of=/sdcard/stock-recovery.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/system of=/sdcard/stock-system.img"
mkdir C:\KFHD8Backup
adb pull /sdcard/stock-boot.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-recovery.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-system.img/ [C:\KFHD8Backup]
but if I go into adb shell and type any commands, like just simple su:
I get /sbin/sh: su: not found
when I do whoami: I get root
but I get a funky prompt:
~#^[[61;5R
instead of a normal # root prompt.
So I'm kind of stuck because I can't really do anything without the su, and it says I'm root. So can I adb push over the files and mount the right drives or whatever to get it to recognize su. At that point I can install twrp, but i'm sure at that point my existing twrp will work too!
I can't seem to get it into fastboot mode either. When I adb devices it says I'm in recovery, not device and in TWRP it says no OS installed. So my only functioning loader is TWRP. (or however you put that more accurately).
I feel like with adb push working, I should be able to do something to get this back, but all the tools expect you to just push a button, not do it the hard way.
So long story short, if you can point me to a thread that tells me how to update TWRP or how to push SU over with ADB or anything that would be awesome. I"m not a complete turd at this, but I think I broke it using something like kingoroot instead of just using the bin4ry while I still had the cyanogenmod working somewhat. So I'm thinking that's why i got the funky prompt, and that's why my su is gone from where it should be.