I spent the whole of yesterday trying to add MoDaCo custom rom. from this post http://forum.xda-developers.com/showthread.php?t=552591 The first of my problems was that I couldn't get the right driver which now seems to be fixed now comes up as - ADB Interface -HTC Bootloader.
So this now means that when i go to fastboot I can load cyanogenMod (system recovery) by typing fastboot boot cm-hero-recovery.img
However none of these commands below in the CMD work. All i get is error: device not found
adb shell reboot bootloader (wait for device to reboot into bootloader)
fastboot boot cm-hero-recovery.img
adb shell mount /sdcard
adb push cm-hero-recovery.img /sdcard/cm-hero-recovery.img
adb shell flash_image recovery /sdcard/cm-hero-recovery.img
Any ideas please
Okay, seems like you're not rooted yet. If that's the case, try the following site...
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
It gives pretty easy instructions on how to put the recovery image on and root the Hero.
After that, try the following link to put a custom ROM on your Hero...
http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/
Cheers also had problems with rooting as well. I thought with the MoDaCo custom romyou didn't need a route. The FlashRec.apk seems to be a zip file not a .apk file so it wouldn't show up like it did on the video demo. on my sd card its still a zip.
Sorry just seen that I posted this thread in dev. Here is the same thread in Q&A http://forum.xda-developers.com/showthread.php?p=4516136#post4516136
If your a Mod please delete
Hey! So I got my G2 from a member on here last night (woohoo!) but I can't seem to root it. I tried every method on here including visionary and gfree. I had some success with gfree since I was able to sim unlock it. When in bootloader I get 's-off' on the first line. But when I go into Rom Manager it tells me I'm not rooted and when I type 'su' into terminal I get 'suermission denied'. Any help here? I really need to flash a new ROM due to ORD.
And just some info from System Info in the boot loader even though I think it's not needed here.
OS ver.-1.22.531.8
eMMC- unknown 2151MB 4407295sectors
Also under IMAGE CRC
hboot: 0x6570c0db
boot: 0x1b87420d
recovery: 0xd4af6ad9
system 0x9f52fea6
Any Update???
OK so you were able to get S-OFF via gfree but not permanent root, when you followed the gfree method, the last step (before the verify) of the gfree rooting guide on the wiki (not sure if that's the one you used) has you run a command to "lock in" root:
You now have read-write access to your /system, hboot, and recovery partitions. But you still need to "lock in" root, and give you 'su' access in the future. So just do:
Code:
# /data/local/tmp/root
# sync
Click to expand...
Click to collapse
I suspect this is where it went wrong.
You should be able to use the same method again to get perm root, just skip the gfree parts. Summary:
1. Get all the files on your phone (they are probably already there)
2. Get temp root using rage
3. Run the command (script) that I listed above
Link to the full instructions: http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#How_To_Get_R.2FW_Access_.28Permanent_Root_.2F_.22Permaroot.22.29
I tried the wiki method three times, making sure I typed everything correctly. After I type the line you put up I get a series on lines that show that some files can't be shown (I dont remember the exact ones off the top of my head, I'll redo it soon so I can tell you which ones). I also tried it with two different SD cards.
SO I found the errors in another thread started today:
Code:
/data/local/tmp/root
mkdir failed for /system/xbin, File exists
cp: can't stat '/system/xbin/busybox': Not a directory
Unable to chmod /system/xbin/busybox: Not a directory
/data/local/tmp/root: /system/xbin/busybox: not found
cp: not found
cp: not found
Unable to chmod /system/bin/su: No such file or directory
Strange, /data/local/tmp/root is just a script that does all of the stuff to get you permanent root, not sure why it shouldn't be working for you.
I think once you are temp rooted you should be able to install CWM recovery and use that to install a new (pre-rooted) ROM. If you are not ready to or don't want to jump into a custom ROM you can load the stock pre-rooted ROM and should not even have to wipe (would advise a nandroid backup of course)
http://forum.xda-developers.com/showthread.php?t=836042
raitchison said:
Strange, /data/local/tmp/root is just a script that does all of the stuff to get you permanent root, not sure why it shouldn't be working for you.
I think once you are temp rooted you should be able to install CWM recovery and use that to install a new (pre-rooted) ROM. If you are not ready to or don't want to jump into a custom ROM you can load the stock pre-rooted ROM and should not even have to wipe (would advise a nandroid backup of course)
http://forum.xda-developers.com/showthread.php?t=836042
Click to expand...
Click to collapse
I should try temprooting again and flashing CWM. And The only reason I want to root is to flash custom roms. lol.
EDIT: Well that didn't help. I followed the guide for temproot. I did get the root prompt (#) in terminal, but when testing with 'su' gives me 'su:not found'. And CWM still tells me I'm not rooted and wont let me flash the recovery.
Try using visionary to temp root, that may yield more success.
You may want to use ADB to pull out the remnants from your previous attempts.
If you have # in the terminal you should not need to su.
If you can't flash CWM using ROM manager try this method instead http://forum.xda-developers.com/showthread.php?t=902493
With visionary I push temp root, it makes me wait for like 10 minutes, and does nothing. I was just doing su to see what it does. I'll try removing everything with adb and redownloading all the files. Anyway, what's the command to remove with adb? lol
Open an ADB shell and use the rm command to remove individual files, I would remove everything you ADB pushed originally.
Code:
rm /sdcard/su
rm /sdcard/Superuser.apk
rm /data/local/tmp/rage
rm /data/local/tmp/busybox
rm /data/local/tmp/root
Will only run if you have root access (a # prompt) and you may get errors with some since clearly something isn't as it should be on your system.
Did you try using the flash_image utility to flash CWM?
Also if you can flash the engineering hboot you should be able to load CWM from fastboot.
So I removed the files, redownloaded, and redid the wiki root method.
Still no luck. Same error as posted before. This is getting on my nerves. lol
Did you try to install recovery using this method?
If that didn't work did you try to install the engineering HBOOT?
raitchison said:
Did you try to install recovery using this method?
If that didn't work did you try to install the engineering HBOOT?
Click to expand...
Click to collapse
I will attempt these methods soon and report back.
This guide is now obsolete. Please use this guide instead.
For Gingerbread Phones, Please use this guide.
Hey guys, this is probably the easiest guide to follow for rooting a branded desire Z. The reason why this can sometimes be hard is cause it uses a unique identifier (INFOCID) and the companies that brand the phones ONLY want roms from their company on them. This stops us from using a WWE rom like every else to downgrade and then root.
But ultimately, the reason I'm making this is because every other guide I've read constantly links you to other guides or other pages and it sorta annoyed me. So after I figured it all out I posted one concise guide that doesn't redirect you 50 times.
Now I’m gonna run you through EVERYTHING so you won’t get stuck anywhere.
This guide will work with:
Device: Desire Z or G2
Firmware Version: Any Firmware version will be fine (All you need to do is downgrade using step 1)
Android Version: Froyo or any previous variation of Android (Absolutely no gingerbread device will root with this method)
Btw, I take no responsibility for any damage taken by using these procedures. Sorry =P
Also if you don't have ADB and Fastboot set up then go ahead and follow the guides on the first two posts here. -Thanks nephron
g4b4g3 said:
If your INFOCID is NOT one of these you need to make a goldcard to downgrade!
HTC__001
HTC__032
HTC__E11
HTC__203
HTC__Y13
HTC__102
HTC__405
HTC__304
HTC__A07
HTC__N34
HTC__J15
Which can be checked by typing the following two commands:
adb reboot bootloader
fastboot oem boot
Click to expand...
Click to collapse
If your CID matches one of the CID's above then you can skip Step 1.
1. Creating a Goldcard:
Prerequisites:
ADB Set up and running fine (to check if it is working just connect your phone and have USB debugging enabled. Then type adb devices in your CMD Prompt)
HxD Hex Editor (see attachments of post 1)
USB Debugging enabled on your phone
1.Firstly we need to mount the memory card on a windows PC.
2. Format the memory card as FAT32 using all the default options.
3. Mount the memory card on your Phone. Then give it a couple of seconds.
4. Remount the memory card on your PC.
5. Find your CID by using the follow command in your cmd prompt (YOU NEED ADB)
Code:
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
6. Use the excel sheet provided to reverse the CID (see Attachments)
7. Goto this website and send yourself a goldcard.img
http://psas.revskills.de/?q=goldcard
8. Run HxD hex editor AS AN ADMINISTRATOR! (I can’t stress how important having admin rights is)
9. Go to Extras > Open Disk Image. Then select your goldcard.img
10. Go to Extras > Open Disk. IMPORTANT: Select your memory card UNDER the Physical Drives category. DO NOT open the logical drive.
11. Switch to your goldcard.img tab. Go to Edit > Select All. Then Edit > Copy.
12. Go to the physical drive tab and select the lines 00000000 until you get to the one with 00000170.
13. Go To Edit > Paste Write.
14. You should have a huge block of red characters now. This is good btw.
15. Mount your SD card on your Phone and let it detect it. If it comes up with a corrupt SD card error you have done it wrong and you may have to start over.
16. You are done with the goldcard.
2. Downgrading and Debranding
Before you start this please do the following:
1a. Download the RUU I’ve linked (it should be a ~300mb exe file) -Thanks g4rb4g3
ii. If you are a BELL User. Please download this RUU instead.
1b. Run the setup until you get to the screen with the tick boxes (Some Users may have to run this as an Administrator)
1c. Leave the setup running and go to C:\Users\<your account name>\AppData\local\temp ( Or Try %AppData%\Local\Temp\ ). Then right click and Sort By Date Modified. Look for the most recently created folder which should look like {xxxxxxx-xxxxxx-xxxxxxxx}. Then navigate into it and its then into its one folder. Look for rom.zip and copy that to your goldcard/memory card.
1d. Rename the rom.zip on your memory card to PC10IMG.zip (Make sure it is exactly the same as the way I've typed it there)
1e. Mount your sd card back onto your phone.
2. Download the attachments (misc_version & psneuters) and extract them in a folder like C:\RootVision\
Now you are ready to begin:
1. Open a CMD prompt window
2. Navigate your way to the folder with psneuter & misc_version IN CMD PROMPT. (So the cmd prompt window should be something like this C:\RootVision> )
3. Now we will use the following 5 commands one after the other
Code:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
adb shell
4. After the last command you should have a # and a flashing line for you to enter text. This is good. (If you get a $ you have done it wrong and should try typing the commands out again)
5. Now you have the # type the following command in: (This will spoof the radio version)
Code:
/data/local/tmp/misc_version –s 1.33.405.5
Then go ahead and type:
Code:
exit
6. Type this command into your cmd prompt (btw you should be back with the normal C:\RootVision>)
Code:
adb reboot bootloader
7. Once on your white screen with colourful text you can go ahead and press the power button ONCE
8. Now just wait for the rom to install and verify. If you get INCORRECT CID your gold card doesn’t work or your CID doesn't match and you'll need a goldcard. (Go to Step 1. and make a goldcard for your phone)
9. Go ahead and install the rom when it asks you.
10. You are done downgrading and can now begin the Rooting process.
See Post 2 For Rooting
Assuming all as gone well and you now have a rom without superuser but you have a baseband version that is 1.34xxxx.
Alright, let’s begin.
Prerequisites:
Download psneuter
Download gfree 0.5
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
3. Root your Desire Z!
Before you start:
Enable USB Debugging and Allow Unknown Market Installations again.
Also delete the PC10IMG.zip on your phone if you downgraded.
Okay lets go:
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f -b hboot-eng.img
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID, secu-flag off & an Unlocked HBOOT-ENG.
If gfree 0.5 doesnt work for you then this section is for you:
Prerequisites:
Download psneuter
Download gfree 0.2
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID and secu-flag off.
4. Installing your own custom ROM
This section is just in case you don't know how to install a custom ROM.
Note: Always make sure the ROM you are installing is FOR YOUR PHONE! If you install a ROM meant for another phone you could potentially damage it or brick the phone itself.
1. Download the ROM you want and copy it to your SD Card. (Try to keep it in a folder that is easy to get to)
2. Turn off your phone.
3. Hold down the volume down button and then press the Power Button. This should take you to a white screen with lots of colourful text. One of which says FASTBOOT or FASTBOOT_USB.
4. Press the power button ONCE when BOOTLOADER is selected(BLUE)
5. Navigate using the volume buttons until you get to RECOVERY and then press the Power Button again.
6. The HTC Logo will come up then you will get a black screen with text.
7. From here you should Always do a NANDROID Backup so you can restore a working ROM if something fails.
NANDROID Backup
7a. Navigate to 'backup and restore' and then select it by pressing the trackpad button.
7b. Select 'Backup' and then let it finish. Once done you have a backup of your android.
8. Now you want to do these before you start installing:
a. 'wipe data/factory reset
b. 'wipe cache partition'
c. Go into 'advanced' and select 'Wipe Dalvik Cache'
9. Now you can install the ROM itself. This is done by selecting 'install zip from sdcard' in the main menu. Now you can select 'choose zip from sdcard' and just go ahead and select the ROM you copid to your sd card earlier.
9a. If the phone says verification failed then just toggle the signature verification option.
FAQ - For Anyone with any issues.
1. My version is 1.7xxxx or higher. Can I use this method?
Yes you can. This method will downgrade your phone to 1.34 so your radio is no longer locked thereby allowing you remove the secu-flag, add superCID and allow you to install a custom recovery (like ClockWorkMod)
2. My CID is XXXXXXXX and isn't on that list, will this method still work?
Yes it will. The reason why it will work is because a goldcard is essentially a manufacturers way of bypassing the CID checks used by ROMs. Therefore, by creating our own unique goldcards we can also bypass the CID check.
3. My CID is on the list that you mentioned. Do I need this goldcard?
No, you can skip the 1st step because when the ROM checks your phones CID it will match up perfectly and the phone will install the older radio without issue.
4. What Benefits does rooting a phone grant you?
Simply, it allows you to install any ROM of your choosing onto the phone as well as use custom kernels and certain applications that access locked functions on the phone. This can ultimately lead to; a longer battery life; more stable roms and more frequently updated roms; and finally an overall faster Android experience.
5. What is root access?
Root access essentially gives you access anything locked by the manufacturer on the phone. This most importantly means that you can read and write to any system partitions on the phone that would normally be locked.
6. Whats psneuter?
psneuter is an application used to grant temporary root access. This is done through an exploit in the android system and will give us a window to further exploit the system and ultimately grant us Permanent Root Access.
7. How do I find my CID?
To find your CID you run two commands. Firstly, in your CMD prompt you type 'adb reboot bootloader' when your phone is connected and USB debugging is active. This will restart your phone into its bootloader. Then once you see the words FASTBOOT_USB you type 'fastboot oem boot'. Then look for the words CID and then just read the 8 character CID.
Also there is a post with a screenshot here.
8. My phone will not find PC10IMG.zip
You will need to double check that the PC10IMG.zip is the correct ZIP file from the RUU that has been linked. It should be roughly 250mb in size and should be placed in the root folder of your SD Card. Also your SD Card must be compatible with your device (able to be read/written to). If you cannot access your SD Card from your Desire Z or G2 then there is probably something wrong with your SD Card. It should probably be reformatted.
9. Can I use this on the Desire Z/G2 running Gingerbread?
So far no one has been able to root the gingerbread version of android on the Desire Z/G2. Unfortunately, this guide still cannot root gingerbread desire Zs or G2s.
If there are any more, feel free to post them and I'll add them
10.I'm Missing my AdbWinApi.dll? What now?
espentan[U said:
][/U]
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
will this work if i have 1.84.666.2?
anyone? thought?
Should work fine as long as you've got a Desire Z or G2 lol.
hi, manageage to root the DZ sucessfully, however on step 5 you say
"5. Type in:
Code:
Reboot"
i got an Reboot: error not found
i retried with with "reboot" and was sucessful
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
jmpcrx said:
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
Click to expand...
Click to collapse
It is pretty difficult to go back to stock updates from your carrier for example Vodafone. This is because of the unique CIDs used and the fact that it is extremely hard to find a stock ROM since no one can give you a NANDROID backup.
Anyways, there are numerous benefits to rooting your phone included with most ROMs. These benefits include longer battery life, faster ROMs & various other things depending on each chef.
Ok, thanks, but are the roms buggy at all, will some of the hardware not work properly, or will i have freezing probs etc, as i found this always to be the case with win mo roms?.. have you personally found a rom that works perfectly that includes htc sense? As i do like the UI..
My goal is to have all security off, full perm root, with a perfecly working sense rom that i can then overclock to a speed that works well with my particular phone, and to underclock when idle etc..
Thanks..
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Vader™ said:
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Click to expand...
Click to collapse
Firstly, to root the phone just follow the steps and once you've finished them all you will be done.
Second, it should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
forceOnature said:
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
Using this method you don't have to worry about your CID. If you make a goldcard it will completely bypass the need for one of the CID's listed in the first post. So to put it simply, you don't need to worry about your unique CID if you create and use a goldcard to downgrade.
Aegishua said:
It should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
Click to expand...
Click to collapse
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Everything goes fine until
mmap() failed. Operation not permitted
when I put in
adb shell /data/local/tmp/psneuter
Any help?
Also I can only put su and Superuser.apk on my sdcard if I manually transfer them.
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Click to expand...
Click to collapse
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
chevy2410 said:
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
Click to expand...
Click to collapse
You should get a line that says INFOt.cid=XXXXXXXX or any of the lines that say your 8 Digit CID. However, as you can see there are multiple lines that say it and they should all be the same.
If your CID does match one on that list then you will not need a goldcard.
I've attached a screenshot to make things easier.
forceOnature said:
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Yeah, you can only have a NANDroid backup of 1.34.xxx because there is no way to get clockwork onto a 1.72+ rom.
Hi, I'm new to rooting the G2. Iv'e been trying to follow this tutorial, but I'm having some trouble. After renaming Rom.zip to PC10IMG.zip I booted into the bootloader and it says 'no image found' or something like that. What am I doing wrong? Am I not supposed to put the zip file on the root of the SD card? Is it possible to just use the RUU to downgrade?
And regarding the downgrade, the build number on my G2 shows 1.22 . Isn't that lower than 1.34?
Any help is appreciated!
I followed the instructions twice and both times I get to
"/data/local/tmp/misc_version –s 1.33.405.5"
I get
/
Patching and backing up partition 17
Error opening backup file.
#
The first time around I iqnored it and went through hboot, the rom PC10IMG.zip was checked and verified and finally failed prompting "the main version is older"
what am I missing?
EDIT: checked SD card, unmount and remounted phone/sdcard no avail.
Will try 1.33 Bell rom next.
EDIT2: Patching and backing up sucessful, problem was I couldn't get my phone to stay in debugged mode without being in DISK DRIVE, had to start HTC Sync to mount the phone in that way to relieve the sd card, allowing adb to patch the file. Now running through PC10IMG.zip with fingers crossed.
EDIT3: Everything went smooth after that! Thanks. Now I will attempt to update to 2.3 and Sense 3.0
EDIT4: Now running on 2.3.3 and Sense 3.0 Virtuous port. Testing...probably going back to more stable gingerbread and sense 2.1
im having trouble wirh "reboot recovery" command in my terminal/adb shell
when i try to run in terminal, i get "not permitted!"
and adb shell says [1] Segmentation fault reboot recovery
if i try running reboot -f in terminal or adb shell, i get "usage: reboot [-n] [-p] [rebootcommand]"
i've checked /system/bin, and the reboot bin is there
i've checked the permisssions, originally set to rwsr-sr-x
changing them to rwxr-xr-x makes no change
i found several threads with ppl having the same trouble:
http://forum.xda-developers.com/showpost.php?p=16022907&postcount=2040
http://forum.xda-developers.com/showthread.php?t=1280074
http://forum.xda-developers.com/showthread.php?t=935715
the only one i found useful is the 1st one
the only way i got reboot working is by deleting /system/bin/reboot, and using "reboot -f". without the -f switch nothing happens. if i do reboot recovery -f, it only rebots
but what i really want is to reboot into recovery. any idea on how to? i read in first linked post that the problem is in symlinked reboot to busybox, thats why deleting helped somewhat. anyone has an idea on how to get rebooting to recovery in terminal working?
oh, and my rom is rcmix 4.0. i've read that problem is rom related. but i dont want to switch, because it would defeat the purpouse in the first place....
You need an insecure boot img to run adb as root. No root no reboot. From terminal instead try sudo -i reboot recovery.
sudo not found
and i have root, i do get # in terminal and adb shell. adb commands like push/pull/chmod work fine
about insecure boot image, as far as i can understand you need that in order to have root, whuch i do have. and afaik, that means pretty much all custom kernels? if im missing something here, please do explane...
Hi guys I am currently new to this forum,
Firstly, I would like to apologize if i am somewhat lacking in knowledge in the Android OS
Currently I am moving from a jailbreak-ed iPhone 4 to a HTC Desire HD, which I want to install a custom ROM on it, as its only limited to 2.3.5 which is quite old, ( Currently on Android 2.3.5 and HTC Sense 3.0 )
I firstly downloaded the 'EasyAceRootTool from this link:
forum.xda-developers.com/showthread.php?t=2221039
I sort of deviated off the guide and sort of found out what to do, using various over guides, so the device is currently rooted ( also flashed with the a ROM which is a rooted stock ROM that came from the thread above ), which came with Superuser and 4EXT, I later installed ClockworkMod,
Next I tried flashing ROMs such as PACman, Cyanogenmod ( I picked the correct versions for the Desire HD ), using the Recovery Menu and the apps 4EXT and Clockworkmod to flash, afterwards I rebooted the phone and it is stuck on the HTC boot screen, my only option after is to restore to a backup.
One thing to note is the device isnt S-OFF, not sure if that the cause of the phone being stuck on the boot screen
Am i doing anything wrong? have I missed a step?
Your help is appreciated :good:
(Urghh just noticed i badly titled the threat)
Pindrop said:
Hi guys I am currently new to this forum,
Firstly, I would like to apologize if i am somewhat lacking in knowledge in the Android OS
Currently I am moving from a jailbreak-ed iPhone 4 to a HTC Desire HD, which I want to install a custom ROM on it, as its only limited to 2.3.5 which is quite old, ( Currently on Android 2.3.5 and HTC Sense 3.0 )
I firstly downloaded the 'EasyAceRootTool from this link:
forum.xda-developers.com/showthread.php?t=2221039
I sort of deviated off the guide and sort of found out what to do, using various over guides, so the device is currently rooted ( also flashed with the a ROM which is a rooted stock ROM that came from the thread above ), which came with Superuser and 4EXT, I later installed ClockworkMod,
Next I tried flashing ROMs such as PACman, Cyanogenmod ( I picked the correct versions for the Desire HD ), using the Recovery Menu and the apps 4EXT and Clockworkmod to flash, afterwards I rebooted the phone and it is stuck on the HTC boot screen, my only option after is to restore to a backup.
One thing to note is the device isnt S-OFF, not sure if that the cause of the phone being stuck on the boot screen
Am i doing anything wrong? have I missed a step?
Your help is appreciated :good:
(Urghh just noticed i badly titled the threat)
Click to expand...
Click to collapse
More than likely your getting stuck at the boot screen because your not S-Off. You need to flash the boot.img also with the rom which your recovery cannot due because your not S-Off I believe. (Dont Quote me on it) If im not mistaken you must first be s-off to flash a kernel, or you could try via fastboot
Yeah I have looked in to the fastboot option, cant due to the ROMs being zips, will have to look into the S-OFF stuff.
Is this suppose to happen on CMD
C:\ace-tools>adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb server is out of date. killing...
* daemon started successfully *
/dev/block/mmcblk0p22: cannot open for read: Permission denied
Currently doing these steps of the ACE TOOLS
In cmd:
•fastboot recovery1.img
5.boot into recovery through bootloader and Install the ROM you placed on the SD card, (via install zip fileselect the rom zip)
6.Reboot the phone, ensure the rom is working fine and you have root access you can test this by turning on usb debugging then:
•Adb shell
•Su
You should see the $ turn into a #. If this happens, congrats you have root access.
Then type this:
•Exit
Then again:
•Exit
Then:
•Adb push boot.img /data/local/tmp
•adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img Currently up to here when that Permission Denied thing happens
•adb pull /data/local/tmp/boot.img
•adb push goldcard /data/local/tmp
•adb shell chmod 775 /data/local/tmp/goldcard
•adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
take note of the string of numbers and letters that appear.
then:
•adb shell /data/local/tmp/goldcard -c <string of numbers and letters should go here> -o /data/local/tmp/goldcard.img
•adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
•adb push misc_version /data/local/tmp
•adb shell chmod 775 /data/local/tmp/misc_version
•adb shell /data/local/tmp/misc_version -s 1.11.111.1
thekool said:
More than likely your getting stuck at the boot screen because your not S-Off. You need to flash the boot.img also with the rom which your recovery cannot due because your not S-Off I believe. (Dont Quote me on it) If im not mistaken you must first be s-off to flash a kernel, or you could try via fastboot
Click to expand...
Click to collapse
You do not need to be S-Off to flash a kernel. With S-On, you can't flash to the boot partition from recovery, but you can flash it with fastboot.
Pindrop said:
Yeah I have looked in to the fastboot option, cant due to the ROMs being zips, will have to look into the S-OFF stuff.
Click to expand...
Click to collapse
No, you don't understand. You don't need to flash the whole ROM from fastboot, only the boot.img, which is in every ROM zip.
ALRIGHT, that did the trick currently now i am running on PAC 22.3.0.
Thanks for the help guys , hopefully I can handle things for now on.